Vision-based active safety system for automatic stopping

ntelligent systems designed to reduce highway fatalities have been widely applied in the automotive sector in the last decade. Of all users of transport systems, pedestrians are the most vulnerable in crashes as they are unprotected. This paper deals with an autonomous intelligent emergency system designed to avoid collisions with pedestrians. The system consists of a fuzzy controller based on the time-to-collision estimate – obtained via a vision-based system – and the wheel-locking probability – obtained via the vehicle’s CAN bus – that generates a safe braking action. The system has been tested in a real car – a convertible Citroën C3 Pluriel – equipped with an automated electro-hydraulic braking system capable of working in parallel with the vehicle’s original braking circuit. The system is used as a last resort in the case that an unexpected pedestrian is in the lane and all the warnings have failed to produce a response from the driver.

Core physics and safety analysis of Generation-IV Sodium Fast Reactors using existing and newly developed computational tools

El futuro de la energía nuclear de fisión dependerá, entre otros factores, de la capacidad que las nuevas tecnologías demuestren para solventar los principales retos a largo plazo que se plantean. Los principales retos se pueden resumir en los siguientes aspectos: la capacidad de proporcionar una solución final, segura y fiable a los residuos radiactivos; así como dar solución a la limitación de recursos naturales necesarios para alimentar los reactores nucleares; y por último, una mejora robusta en la seguridad de las centrales que en definitiva evite cualquier daño potencial tanto en la población como en el medio ambiente como consecuencia de cualquier escenario imaginable o más allá de lo imaginable. Siguiendo estas motivaciones, la Generación IV de reactores nucleares surge con el compromiso de proporcionar electricidad de forma sostenible, segura, económica y evitando la proliferación de material fisible. Entre los sistemas conceptuales que se consideran para la Gen IV, los reactores rápidos destacan por su capacidad potencial de transmutar actínidos a la vez que permiten una utilización óptima de los recursos naturales. Entre los refrigerantes que se plantean, el sodio parece una de las soluciones más prometedoras. Como consecuencia, esta tesis surgió dentro del marco del proyecto europeo CP-ESFR con el principal objetivo de evaluar la física de núcleo y seguridad de los reactores rápidos refrigerados por sodio, al tiempo que se desarrollaron herramientas apropiadas para dichos análisis. Efectivamente, en una primera parte de la tesis, se abarca el estudio de la física del núcleo de un reactor rápido representativo, incluyendo el análisis detallado de la capacidad de transmutar actínidos minoritarios. Como resultado de dichos análisis, se publicó un artículo en la revista Annals of Nuclear Energy [96]. Por otra parte, a través de un análisis de un hipotético escenario nuclear español, se evalúo la disponibilidad de recursos naturales necesarios en el caso particular de España para alimentar una flota específica de reactores rápidos, siguiendo varios escenarios de demanda, y teniendo en cuenta la capacidad de reproducción de plutonio que tienen estos sistemas. Como resultado de este trabajo también surgió una publicación en otra revista científica de prestigio internacional como es Energy Conversion and Management [97]. Con objeto de realizar esos y otros análisis, se desarrollaron diversos modelos del núcleo del ESFR siguiendo varias configuraciones, y para diferentes códigos. Por otro lado, con objeto de poder realizar análisis de seguridad de reactores rápidos, son necesarias herramientas multidimensionales de alta fidelidad específicas para reactores rápidos. Dichas herramientas deben integrar fenómenos relacionados con la neutrónica y con la termo-hidráulica, entre otros, mediante una aproximación multi-física. Siguiendo este objetivo, se evalúo el código de difusión neutrónica ANDES para su aplicación a reactores rápidos. ANDES es un código de resolución nodal que se encuentra implementado dentro del sistema COBAYA3 y está basado en el método ACMFD. Por lo tanto, el método ACMFD fue sometido a una revisión en profundidad para evaluar su aptitud para la aplicación a reactores rápidos. Durante ese proceso, se identificaron determinadas limitaciones que se discutirán a lo largo de este trabajo, junto con los desarrollos que se han elaborado e implementado para la resolución de dichas dificultades. Por otra parte, se desarrolló satisfactoriamente el acomplamiento del código neutrónico ANDES con un código termo-hidráulico de subcanales llamado SUBCHANFLOW, desarrollado recientemente en el KIT. Como conclusión de esta parte, todos los desarrollos implementados son evaluados y verificados. En paralelo con esos desarrollos, se calcularon para el núcleo del ESFR las secciones eficaces en multigrupos homogeneizadas a nivel nodal, así como otros parámetros neutrónicos, mediante los códigos ERANOS, primero, y SERPENT, después. Dichos parámetros se utilizaron más adelante para realizar cálculos estacionarios con ANDES. Además, como consecuencia de la contribución de la UPM al paquete de seguridad del proyecto CP-ESFR, se calcularon mediante el código SERPENT los parámetros de cinética puntual que se necesitan introducir en los típicos códigos termo-hidráulicos de planta, para estudios de seguridad. En concreto, dichos parámetros sirvieron para el análisis del impacto que tienen los actínidos minoritarios en el comportamiento de transitorios. Concluyendo, la tesis presenta una aproximación sistemática y multidisciplinar aplicada al análisis de seguridad y comportamiento neutrónico de los reactores rápidos de sodio de la Gen-IV, usando herramientas de cálculo existentes y recién desarrolladas ad' hoc para tal aplicación. Se ha empleado una cantidad importante de tiempo en identificar limitaciones de los métodos nodales analíticos en su aplicación en multigrupos a reactores rápidos, y se proponen interesantes soluciones para abordarlas. ABSTRACT The future of nuclear reactors will depend, among other aspects, on the capability to solve the long-term challenges linked to this technology. These are the capability to provide a definite, safe and reliable solution to the nuclear wastes; the limitation of natural resources, needed to fuel the reactors; and last but not least, the improved safety, which would avoid any potential damage on the public and or environment as a consequence of any imaginable and beyond imaginable circumstance. Following these motivations, the IV Generation of nuclear reactors arises, with the aim to provide sustainable, safe, economic and proliferationresistant electricity. Among the systems considered for the Gen IV, fast reactors have a representative role thanks to their potential capacity to transmute actinides together with the optimal usage of natural resources, being the sodium fast reactors the most promising concept. As a consequence, this thesis was born in the framework of the CP-ESFR project with the generic aim of evaluating the core physics and safety of sodium fast reactors, as well as the development of the approppriated tools to perform such analyses. Indeed, in a first part of this thesis work, the main core physics of the representative sodium fast reactor are assessed, including a detailed analysis of the capability to transmute minor actinides. A part of the results obtained have been published in Annals of Nuclear Energy [96]. Moreover, by means of the analysis of a hypothetical Spanish nuclear scenario, the availability of natural resources required to deploy an specific fleet of fast reactor is assessed, taking into account the breeding properties of such systems. This work also led to a publication in Energy Conversion and Management [97]. In order to perform those and other analyses, several models of the ESFR core were created for different codes. On the other hand, in order to perform safety studies of sodium fast reactors, high fidelity multidimensional analysis tools for sodium fast reactors are required. Such tools should integrate neutronic and thermal-hydraulic phenomena in a multi-physics approach. Following this motivation, the neutron diffusion code ANDES is assessed for sodium fast reactor applications. ANDES is the nodal solver implemented inside the multigroup pin-by-pin diffusion COBAYA3 code, and is based on the analytical method ACMFD. Thus, the ACMFD was verified for SFR applications and while doing so, some limitations were encountered, which are discussed through this work. In order to solve those, some new developments are proposed and implemented in ANDES. Moreover, the code was satisfactorily coupled with the thermal-hydraulic code SUBCHANFLOW, recently developed at KIT. Finally, the different implementations are verified. In addition to those developments, the node homogenized multigroup cross sections and other neutron parameters were obtained for the ESFR core using ERANOS and SERPENT codes, and employed afterwards by ANDES to perform steady state calculations. Moreover, as a result of the UPM contribution to the safety package of the CP-ESFR project, the point kinetic parameters required by the typical plant thermal-hydraulic codes were computed for the ESFR core using SERPENT, which final aim was the assessment of the impact of minor actinides in transient behaviour. All in all, the thesis provides a systematic and multi-purpose approach applied to the assessment of safety and performance parameters of Generation-IV SFR, using existing and newly developed analytical tools. An important amount of time was employed in identifying the limitations that the analytical nodal diffusion methods present when applied to fast reactors following a multigroup approach, and interesting solutions are proposed in order to overcome them.

Assessment of the influence of the elastic properties of rail vehicle suspensions on safety, ride quality and track fatigue

A sensitivity analysis has been performed to assess the influence of the elastic properties of railway vehicle suspensions on the vehicle dynamic behaviour. To do this, 144 dynamic simulations were performed modifying, one at a time, the stiffness and damping coefficients, of the primary and secondary suspensions. Three values were assigned to each parameter, corresponding to the percentiles 10, 50 and 90 of a data set stored in a database of railway vehicles.After processing the results of these simulations, the analyzed parameters were sorted by increasing influence. It was also found which of these parameters could be estimated with a lesser degree of accuracy in future simulations without appreciably affecting the simulation results. In general terms, it was concluded that the highest influences were found for the longitudinal stiffness and the lateral stiffness of the primary suspension, and the lowest influences for the vertical stiffness and the vertical damping of the primary suspension, with the parameters of the secondary suspension showing intermediate influences between them.

Languages for safety-certification related propertis

The Safety Certification of Software-Intensive Systems with Reusable Components project, in short SafeCer (www.safecer.eu),is targeting increased efficiency and reduced time-to-market by composable safety certification of safety- relevant embedded systems. The industrial domains targeted are within automotive and construction equipment, avionics, and rail. Some of the companies involved are: Volvo Tech- nology, Thales, TTTech, and Intecs among others. SafeCer includes more than 30 partners in six different countries and has a budget of e25.7 millions. A primary objective is to provide support for system safety arguments based on arguments and properties of system components as well as to provide support for generation of corresponding evidence in a similar compositional way. By providing support for efficient reuse of certification and stronger links between certification and development, compo- nent reuse will be facilitated, and by providing support for reuse across domains the amount of components available for reuse will increase dramatically. The resulting efficiency and reduced time to market will, together with increased quality and reduced risk, increase competitiveness and pave the way for a cross-domain market for software components qualified for certification.

Diseño de instrumentos para configurar una política industrial en España basada en los postulados de la economía evolutiva

La evidencia empírica aplicada a países de cierto tamaño y desarrollo económico, muestra que existe una relación directa y positiva entre la intensidad de la industria manufacturera, medida como porcentaje de su PIB, y ciertas variables económicas como, el crecimiento, el desempleo y la balanza exterior de bienes y servicios. En el caso de esta última, se verifica empíricamente, que los países con una proporción de actividad manufacturera inferior al 20%, tienen una marcada tendencia a presentar déficits crónicos de balanza de bienes y servicios, lo que conduce a persistentes déficits por cuenta corriente, al ser el primer déficit el principal componente del segundo. Esto trae consigo un continuado incremento del endeudamiento externo que no cesa, y que terminará en algún momento por desequilibrar el conjunto de la economía de los países con esos déficits crónicos. Las anteriores conclusiones, abren una vía de orientación de la política económica, que tiene como objetivo la promoción de la industria manufacturera de cada país. Y esto es un hecho ya en 2014. Países relevantes, como Alemania o Francia en la UE, incluso los EEUU y últimamente el Reino Unido, y por supuesto países del área asiática como Japón, Corea del Sur y China, llevan años promoviendo su industria manufacturera. Resulta significativo, que el debate ideológico sobre la bondad de la aplicación política industrial por parte de los gobiernos, frente a las teorías liberales de mantener a los poderes públicos lejos de ese tipo de actividades, haya dado paso a un modelo generalizado de corte más bien horizontal, donde los países casi sin excepciones apoyan el desarrollo de sus empresas con numerosos instrumentos, que van bastante más lejos de los habituales de I+D. Se valora por tanto, la industria manufacturera como algo vital para el equilibrio económico. Incluso la UE, defensora durante décadas de la no intervención de los diferentes Estados miembros en actividades de promoción industrial más allá del apoyo a las actividades de I+D, realiza un giro copernicano, que termina en 2012 proclamando que la industria manufacturera es vital para el equilibrio económico de la UE, que hay que promoverla, e incluso marca un objetivo, precisamente del 20%, como contribución manufacturera a su PIB. Es decir, se da por asumido que los servicios no son un sustituto indefinido de la industria y que por tanto tienen un límite, lo que se contrapone frontalmente contra la anterior creencia de que el aumento de la participación de los servicios en la economía, no solo era bueno, sino un síntoma de desarrollo. Esta premisa ya ha dejado de ser cierta para esos y otros países. En cambio, en España nada de esto sucede en las dos últimas décadas, sino que la industria manufacturera no recibe especial atención de los poderes públicos y se desliza en una pendiente de disminución de su contribución al PIB, que incluso se acelera con la crisis económica que comienza en 2007, hasta alcanzar cifras del orden del 12% del PIB en 2013. La política económica que se aplica es la de la deflación de costes, con los efectos consecuentes sobre los salarios y sobre la capacidad de la economía de generar riqueza. Se apuesta por un modelo de mano de obra barata, que recuerda al de los años 60. Como indicador relevante de esta situación, lo que exporta la industria manufacturera española, no ha ganado en contenido tecnológico en los últimos quince años. Esta situación se ve empeorada por un hecho significativo adicional, y es que casi el 40% de las ventas de la industria manufacturera española provienen de empresas de propiedad extranjera, con lo que eso supone por una parte de dependencia tecnológica del exterior como en el caso del automóvil, y de incertidumbre sobre su futuro, al estar basadas en el mantenimiento en el futuro de una mano de obra barata, que frenará que los españoles que trabajan en esas empresas, progresen económicamente. La propuesta de esta Tesis, es en cambio apostar por un modelo de crecimiento para España que tenga como uno de sus pilares el desarrollo de una industria manufacturera sólida y con cada vez mayor contenido tecnológico. Para ello, se propone un Plan de política industrial, donde se incluye la creación de actores impulsores de este plan, que deben ser del máximo nivel político. Si los diferentes gobiernos no entienden y asumen esta necesidad de apoyo a la industria a largo plazo e independiente de los cambios políticos, no será posible llevar a cabo este Plan. Para su puesta en marcha, se propone la creación o refuerzo de numerosos instrumentos de apoyo a la industria manufacturera de carácter fundamentalmente horizontal que van mucho más allá de los habituales del I+D, y que en varios casos, tienen una clara semejanza con otros existentes ya en otros países desarrollados desde hace años. La promoción de la industria manufacturera necesita nuevos instrumentos, como una financiación a largo plazo para las empresas, una promoción ordenada y eficaz de la actividad internacional de las empresas exportadoras, la mayoría de las cuales exportan productos manufacturados, una educación y formación profesional que esté alineada con estos objetivos, unos instrumentos que apoyen en especial el desarrollo la industria manufacturera, o la participación minoritaria pero significativa, del Estado en empresas españolas pertenecientes a sectores estratégicos entre otros. En resumen, esta Tesis propone una alternativa de política económica radicalmente diferente a la de dejar la industria manufacturera española a su suerte, y basar el futuro económico de España en una mano de obra barata. ABSTRACT The empirical evidence, applied to countries of certain size and economic development, shows that there exists a direct and positive relationship between industrial manufacturing activity, measured as a percentage of GDP, and certain economic variables, such as growth, unemployment and the foreign balance of trade. In the case of the latter, it is verified empirically that the countries with a percentage of manufacturing activity below 20% have a marked tendency for chronic deficits of the balance of trade, leading to persistent deficits in the current account, being that the former deficit is the main component of the latter. This brings about a continued increase in foreign debt that does not cease, and that will end at some point by disrupting the economy of the countries with these chronic deficits. The previous conclusions open the way to a new direction for economic policy, which promotes industrial manufacturing in each country. This is already a fact in 2014. Relevant countries, such as Germany or France in the EU, even the US and ultimately the UK, and of course countries of East Asia such as Japan, South Korea and China, have been promoting their industrial manufacturing for years. It becomes significant that the ideological debate about the goodwill of the application of industrial policy by governments, against liberal theories that maintain public powers far from these kinds of activities, has taken a step towards a horizontal-cut generalized model, where countries, with almost no exception, rely on various instruments to develop their companies that go much further than the usual R&D. Industrial manufacture is therefore valued as vital for economic stability. Even the EU, proponent for decades of non-intervention policy that goes beyond R&D, has gone full circle, ending in 2012 by proclaiming that industrial manufacture is vital for the economic stability of the EU, that it must be promoted. They even mark precisely 20% as an objective for manufacturing as a percentage of GDP. In other words, it is a given that services are not an indefinite substitute for industry, and that therefore it has a limit as such. This rejects the notion that the increase in services at the cost of manufacture is not only healthy, but is also a symptom of development. This premise is no longer true for these and other countries. On the other hand, none of this happens in Spain, where industrial manufacture receives no special attention from the public authorities, and it slides on a downward slope of percentage contribution to GDP, which accelerates the economic crisis that begins in 2007, until manufacture reaches values of around 12% of GDP in 2013. The economic policy applied is that of cost deflation, with consequential effects on wages and the capacity of the economy to generate wealth. A model is proposed for cheaper labor, akin to that of the 1960s. As a relevant indicator of this situation, manufacturing exports from Spain have not grown technologically in the last 15 years. The situation is made worse by another significant fact: almost 40% of sales of the manufacturing industry originate from companies of foreign origin, which supposes on one hand a technological dependence on foreign countries, such as in the case of the automotive industry, and on the other hand uncertainty in its future, being that they are based on maintaining cheap labor in the future, which will slow economic progress of Spaniards working in these companies. The proposition of this Thesis is to bet on a growth model for Spain that has as one of its pillars the development of a solid manufacturing industry, with increasing technological content. For this, an industrial policy plan is proposed, which includes the creation of driving agents for this plan, which must be of maximum political level. If the various governments don’t understand and assume this necessity for support of industry in the long term, independent of political change, this plan will not be accomplished. To start it, the creation or reinforcement of numerous instruments to promote the manufacturing activities are proposed, with a fundamentally horizontal nature that goes far beyond the usual R&D, and that, in several cases, have a clear similarity with others existing in other countries, having been developed for years. The promotion of the manufacturing industry needs new instruments, such as the long-term financing of companies, an orderly and efficient promotion of international activity of exporting companies, the most of which export manufactured goods, education and professional training which is in tune with these objectives, some instruments which support in particular the development of the manufacturing industry, or the minor yet significant participation of the State in Spanish companies belonging to strategic sectors, among others. In summary, this Thesis proposes an different alternative to the economic policy of leaving the manufacturing industry of Spain to its chances, and to base the economic future of Spain on a cheaper labor force.

Experimental tests in human-robot collision evaluation and characterization of a new safety index for robot operation

This paper describes an experimental procedure consisting of impact tests that simulate a collision of a human head with an industrial robot with the aim to validate a safety index named as New Index for Robots (NIR) and its outputs. The experiments in this paper are based on lab tests. It is an attempt to characterize the NIR index underlying the main parameters that are involved in crash interaction and to highlight limitations and weakness of suggested impact tests.

Educación Superior de la Ingeniería Industrial en el Perú: propuesta de un modelo educativo desde las competencias

El objetivo del presente trabajo de investigación es diseñar un Modelo de Educación que permita formar ingenieros industriales en Perú que sean capaces de enfrentar los retos modernos de fuerte y sostenido crecimiento económico y social. Las necesidades que se han generado a lo largo de los últimos años llevan a identificar que una gran carencia es el poco dominio del concepto, naturaleza y gestión de un proyecto y la marcada ausencia de habilidades humanas y funcionales al momento de ejercer la profesión; entendiendo proyecto como “Un esfuerzo temporal que se lleva a cabo para crear un producto, servicio o resultado único. La naturaleza temporal de los proyectos indica un principio y un final definidos. El final se alcanza cuando se logran los objetivos del proyecto o cuando se termina el proyecto porque sus objetivos no se cumplirán o no pueden ser cumplidos, o cuando ya no existe la necesidad que dio origen al proyecto…. los proyectos pueden tener impactos sociales, económicos y ambientales susceptibles de perdurar mucho más que los propios proyectos.”1. Entonces, formularnos la hipótesis que es posible tener un modelo educativo para la Ingeniería Industrial de Perú que permita y estimule alcanzar estas características tan reclamadas por la sociedad, confiando desde el inicio que su diseño y empleo tendrá fuerte repercusión tanto en el desarrollo personal de los estudiantes, como en el social y económico, por las habilidades y condiciones que serán capaces de desplegar los egresados en sus ámbitos de acción laboral. Para lograr el objetivo se ha hecho una definición de la identidad de la universidad latinoamericana y una verificación de si es posible o no tomar modelos y experiencias de otros lugares y trasladarlos con éxito a escenarios nuevos y distintos. Luego, se han determinado las tendencias más fuertes en la formación de ingenieros industriales en los contextos más exitosos actualmente. Para definir esas habilidades tan reclamadas por el sector público y privado de la sociedad, se busca y define una codificación de competencias genéricas que permite tener un ingeniero moderno bien perfilado para las exigencias globales. Los pasos finales son determinar el Modelo para la Educación Superior de la Ingeniería Industrial de Perú desde las Competencias (MESIC) a partir de novedosos enfoques para la educación como la contextualización, la gestión del conocimiento experto y experimentado, el enfoque socioformativo y la definición de Aspectos Clave del modelo antes de iniciar una planificación curricular de ingeniería. Al final se muestra una aplicación del modelo llegando a detalles de definición de competencias muy interesantes y a la necesidad de contar con un sistema de aseguramiento de calidad de la gestión curricular. Al término de la investigación concluimos que es posible definir un modelo apropiado para formar ingenieros industriales en Perú desde las competencias, capaces de enfrentar los modernos retos locales y globales. También determinamos que el proceso no puede ser impuesto, debe pasar por un transitorio periodo de adecuación de docentes y alumnos y requiere de compromiso, pues se suele enfocar este cambio como una forma de desestimar todo lo anterior, cuando debe entenderse que son procesos complementarios, ya que los importantes logros con clases magistrales y resolución de problemas son evidentes y se trata de estilos diferentes de encarar la educación. El resultado de la imposición puede ser devastador para algunos estudiantes y frustrante para algunos docentes, consecuencias que no se desean y deben evitarse. La aplicación se realiza en una universidad del norte de Perú, la Universidad de Piura, y puede observarse en el último capítulo de este trabajo. ABSTRACT The main objective of this research is to find an Educational Modell in order to train industrial engineers in Peru who are able to face modern challenges of strong and sustained economic and social growth. Over recent years the generated needs have led to understand that a major weakness in our professionals is the poor skills in project management and the marked absence of functional and human skills when exercising the profession. This diagnose has led to formulate the hypothesis that it is possible to have an educational model for Peru Industrial Engineering that allows and encourages to achieve these features which are claimed by society. A project which we trust will have a strong impact from the beginning on both, personal development of students as well as in the social and economic conditions, considering the skills graduates will be able to deploy in their work fields. To achieve the goal first it was defined the identity of the Latin American university and verified whether it is possible or not to take models and experiences elsewhere and move successfully to new and different scenarios. Then there were determined the strongest trends in the industrial engineers training in currently successful contexts. In order to define these demanded skills by the public and private sectors of society, there are defined a set of generic skills that allows to have a modern engineer well profiled for global context. Considering these elements, a Model for Higher Education in Industrial Engineering from Peru Competence (MESIC)is proposed considering novel approaches to education such as territoriality, skilled and experienced knowledge management, socio - formative approach and set the definition of Key aspects of the model before starting a engineering curricular planning. Finally detailed records of an application of the model is shown through modern learning methodologies, development and assessment of skills and the need to have a quality assurance system for entire curriculum management. Through this research it can be concluded that it is possible to determine an appropriate model to train industrial engineers in Peru from the skills, in order to meet the modern local and global challenges. Results show that the process cannot be imposed, instead it must go through a transitional period of adaptation from teachers and students and requires commitment, focusing that this change usually is a way to dismiss the above, and is important to address that there are obvious achievements on education lectures and problem solving, and it should be understood that they are complementary processes. The result of change imposition can be devastating for some students and frustrating for some teachers, unwanted consequences and they should be avoided. The proposed model is applied at a university in northern Peru, the University of Piura, and the results can be seen in the last chapter of this work.

A UNIVERSIDADE CORPORATIVA E O TREINAMENTO INDUSTRIAL A DISTÂNCIA PARA PROFISSIONAIS DE MANUTENÇÃO

Este trabalho trata dos principais aspectos envolvidos na avaliação e características conceituais acerca dos fundamentos e práticas do ensino a distância enfocando o treinamento industrial a distância para profissionais de manutenção, utilizando a internet como principal ferramenta e o desafio de relacionar a tecnologia com a metodologia voltada para o profissional técnico operacional. A internet é uma ferramenta que pode ser utilizada para o ensino em geral, ela permite acesso fácil a uma infinidade de material informativo autêntico e atualizado, além de exemplos concretos e interativos na perspectiva de transformar a informação recebida por meios eletrônicos em conhecimento sólido adquirido. Diante disso, a análise do trabalho recai, num primeiro momento, sobre os pressupostos que criaram o treinamento industrial, o treinamento na área de manutenção industrial e, os aspectos da estrutura que cria o treinamento industrial a distância, em seguida, aprofundamos-nos no conhecimento acerca das técnicas que envolvem o treinamento para profissionais da área de manutenção industrial a distância. Também é apresentada a experiência dos cursos profissionalizantes a distância através de vários meios e a experiências dos portais de educação a distância voltados para área de manutenção industrial.

A UNIVERSIDADE CORPORATIVA E O TREINAMENTO INDUSTRIAL A DISTÂNCIA PARA PROFISSIONAIS DE MANUTENÇÃO

Este trabalho trata dos principais aspectos envolvidos na avaliação e características conceituais acerca dos fundamentos e práticas do ensino a distância enfocando o treinamento industrial a distância para profissionais de manutenção, utilizando a internet como principal ferramenta e o desafio de relacionar a tecnologia com a metodologia voltada para o profissional técnico operacional. A internet é uma ferramenta que pode ser utilizada para o ensino em geral, ela permite acesso fácil a uma infinidade de material informativo autêntico e atualizado, além de exemplos concretos e interativos na perspectiva de transformar a informação recebida por meios eletrônicos em conhecimento sólido adquirido. Diante disso, a análise do trabalho recai, num primeiro momento, sobre os pressupostos que criaram o treinamento industrial, o treinamento na área de manutenção industrial e, os aspectos da estrutura que cria o treinamento industrial a distância, em seguida, aprofundamos-nos no conhecimento acerca das técnicas que envolvem o treinamento para profissionais da área de manutenção industrial a distância. Também é apresentada a experiência dos cursos profissionalizantes a distância através de vários meios e a experiências dos portais de educação a distância voltados para área de manutenção industrial.

Intermediate hosts of Toxoplasma gondii and food safety:epidemiology, genetics and parasite survival in meat-producing animals in Italy

Toxoplasma gondii is a coccidian parasite with a global distribution. The definitive host is the cat (and other felids). All warm-blooded animals can act as intermediate hosts, including humans. Sexual reproduction (gametogony) takes place in the final host and oocysts are released in the environment, where they then sporulate to become infective. In intermediate hosts the cycle is extra-intestinal and results in the formation of tachyzoites and bradyzoites. Tachyzoites represent the invasive and proliferative stage and on entering a cell it multiplies asexually by endodyogeny. Bradyzoites within tissue cysts are the latent form. T. gondii is a food-borne parasite causing toxoplasmosis, which can occur in both animals and humans. Infection in humans is asymptomatic in more than 80% of cases in Europe and North-America. In the remaining cases patients present fever, cervical lymphadenopathy and other non-specific clinical signs. Nevertheless, toxoplasmosis is life threatening if it occurs in immunocompromised subjects. The main organs involved are brain (toxoplasmic encephalitis), heart (myocarditis), lungs (pulmonary toxoplasmosis), eyes, pancreas and parasite can be isolated from these tissues. Another aspect is congenital toxoplasmosis that may occur in pregnant women and the severity of the consequences depends on the stage of pregnancy when maternal infection occurs. Acute toxoplasmosis in developing foetuses may result in blindness, deformation, mental retardation or even death. The European Food Safety Authority (EFSA), in recent reports on zoonoses, highlighted that an increasing numbers of animals resulted infected with T. gondii in EU (reported by the European Member States for pigs, sheep, goats, hunted wild boar and hunted deer, in 2011 and 2012). In addition, high prevalence values have been detected in cats, cattle and dogs, as well as several other animal species, indicating the wide distribution of the parasite among different animal and wildlife species. The main route of transmission is consumption of food and water contaminated with sporulated oocysts. However, infection through the ingestion of meat contaminated with tissue cysts is frequent. Finally, although less frequent, other food products contaminated with tachyzoites such as milk, may also pose a risk. The importance of this parasite as a risk for human health was recently highlighted by EFSA’s opinion on modernization of meat inspection, where Toxoplasma gondii was identified as a relevant hazard to be addressed in revised meat inspection systems for pigs, sheep, goats, farmed wild boar and farmed deer (Call for proposals -GP/EFSA/BIOHAZ/2013/01). The risk of infection is more highly associated to animals reared outside, also in free-range or organic farms, where biohazard measure are less strict than in large scale, industrial farms. Here, animals are kept under strict biosecurity measures, including barriers, which inhibit access by cats, thus making soil contamination by oocysts nearly impossible. A growing demand by the consumer for organic products, coming from free-range livestock, in respect of animal-welfare, and the desire for the best quality of derived products, have all led to an increase in the farming of free-range animals. The risk of Toxoplasma gondii infection increases when animals have access to environment and the absence of data in Italy, together with need for in depth study of both the prevalence and genotypes of Toxoplasma gondii present in our country were the main reasons for the development of this thesis project. A total of 152 animals have been analyzed, including 21 free-range pigs (Suino Nero race), 24 transhumant Cornigliese sheep, 77 free-range chickens and 21 wild animals. Serology (on meat juice) and identification of T. gondii DNA through PCR was performed on all samples, except for wild animals (no serology). An in-vitro test was also applied with the aim to find an alternative and valid method to bioassay, actually the gold standard. Meat samples were digested and seeded onto Vero cells, checked every day and a RT-PCR protocol was used to determine an eventual increase in the amount of DNA, demonstrating the viability of the parasite. Several samples were alos genetically characterized using a PCR-RFLP protocol to define the major genotypes diffused in the geographical area studied. Within the context of a project promoted by Istituto Zooprofilattico of Pavia and Brescia (Italy), experimentally infected pigs were also analyzed. One of the aims was to verify if the production process of cured “Prosciutto di Parma” is able to kill the parasite. Our contribution included the digestion and seeding of homogenates on Vero cells and applying the Elisa test on meat juice. This thesis project has highlighted widespread diffusion of T. gondii in the geographical area taken into account. Pigs, sheep, chickens and wild animals showed high prevalence of infection. The data obtained with serology were 95.2%, 70.8%, 36.4%, respectively, indicating the spread of the parasite among numerous animal species. For wild animals, the average value of parasite infection determined through PCR was 44.8%. Meat juice serology appears to be a very useful, rapid and sensitive method for screening carcasses at slaughterhouse and for marketing “Toxo-free” meat. The results obtained on fresh pork meat (derived from experimentally infected pigs) before (on serum) and after (on meat juice) slaughter showed a good concordance. The free-range farming put in evidence a marked risk for meat-producing animals and as a consequence also for the consumer. Genotyping revealed the diffusion of Type-II and in a lower percentage of Type-III. In pigs is predominant the Type-II profile, while in wildlife is more diffused a Type-III and mixed profiles (mainly Type-II/III). The mixed genotypes (Type-II/III) could be explained by the presence of mixed infections. Free-range farming and the contact with wildlife could facilitate the spread of the parasite and the generation of new and atypical strains, with unknown consequences on human health. The curing process employed in this study appears to produce hams that do not pose a serious concern to human health and therefore could be marketed and consumed without significant health risk. Little is known about the diffusion and genotypes of T. gondii in wild animals; further studies on the way in which new and mixed genotypes may be introduced into the domestic cycle should be very interesting, also with the use of NGS techniques, more rapid and sensitive than PCR-RFLP. Furthermore wildlife can become a valuable indicator of environmental contamination with T. gondii oocysts. Other future perspectives regarding pigs include the expansion of the number of free-range animals and farms and for Cornigliese sheep the evaluation of other food products as raw milk and cheeses. It should be interesting to proceed with the validation of an ELISA test for infection in chickens, using both serum and meat juice on a larger number of animals and the same should be done also for wildlife (at the moment no ELISA tests are available and MAT is the reference method for them). Results related to Parma ham do not suggest a concerning risk for consumers. However, further studies are needed to complete the risk assessment and the analysis of other products cured using technological processes other than those investigated in the present study. For example, it could be interesting to analyze products such as salami, produced with pig meat all over the Italian country, with very different recipes, also in domestic and rural contexts, characterized by a very short period of curing (1 to 6 months). Toxoplasma gondii is one of the most diffuse food-borne parasites globally. Public health safety, improved animal production and protection of endangered livestock species are all important goals of research into reliable diagnostic tools for this infection. Future studies into the epidemiology, parasite survival and genotypes of T. gondii in meat producing animals should continue to be a research priority.

Use of Globalization Framework for K-12 Education Adams Five Star Schools, Thornton, Colorado

Many of the educational structures in public education today have their roots in the educational reforms of the industrial and Cold War eras. These educational structures served the United States well in a time of industrialization and two-state global superpowers. However, society has rapidly become more interconnected and globalized. K-12 education has not required that students develop the new skills and habits of mind needed for success in the twenty-first century. This study proposes three curricular and instructional changes to help students meet the needs of a global society in Adams Twelve Five-Star Schools located in Thornton, Colorado. These curricular and instructional reforms, while intended to address globalization, will also help the district stay competitive among local districts.

Leading Safety Indicators: Proactively Monitoring Safety Performance

Traditional measures or indicators of workplace safety performance reflect unrecognized hazards, unsafe conditions, reckless behavior, and other safety program shortcomings only after a worker is injured or falls ill. In contrast to traditional or lagging indicators, leading indicators can predict poor safety performance to ensure that safety program failings are addressed before an occupational injury or illness actually occurs. This Capstone Project identified a variety of proactive safety management practices, policies, and activities shown to have a positive impact on workplace safety as leading safety indicators. The end result is a comprehensive framework of leading safety indicators that employers can use to proactively gauge safety program performance and address unrecognized hazards, unsafe conditions, reckless behavior, and other safety program deficiencies.

Adiestrando a la juventud obrera: la política de formación técnica-industrial de la dictadura primorriverista

El objetivo de este trabajo es analizar cómo la dictadura de Primo de Rivera llevó a cabo la reforma de la enseñanza industrial del joven obrero a través del Estatuto de Enseñanza Industrial de 1924 y del Estatuto de Formación Profesional de 1928, dentro de la órbita ideológica del “modernismo reaccionario”. La dictadura primorriverista se encontraba en una época influida por las consecuencias de la Gran Guerra y empezaba a percibir la formación profesional técnica-industrial como un mecanismo de adoctrinamiento de la juventud obrera, a partir del cual se podía construir una identidad nacional y profesional, a la vez que modernizar la industria nacional. Por ello, la dictadura de Primo de Rivera decidió centralizar todos los canales de formación industrial del joven obrero a través de un nuevo plan de estudios técnico e industrial dentro de las escuelas industriales y de trabajo. Así intentaba controlar al movimiento obrero, formar una clase media de técnicos industriales, satisfacer las necesidades económicas del país, al mismo tiempo que mantener la jerarquización socio-política tradicional. Pero la aplicación de este proyecto educativo durante la Segunda República no cumplió con las expectativas ideológicas y políticas de la dictadura de Primo de Rivera.

Department-store education: an acount of the training methods developed at the Boston School of Salemanship under the direction of Lucinda Wyman Prince

by Helen Rich Norton.

Commercial vehicle safety -- technology and practice in Europe.

Federal Highway Administration, Office of Policy Planning, Office of International Program, Washington, D.C.