Proper orthogonal decomposition of oscillatory Marangoni flow in half-zone liquid bridges of low-Pr fluids

Proper orthogonal decomposition (POD) using method of snapshots was performed on three different types of oscillatory Marangoni flows in half-zone liquid bridges of low-Pr fluid (Pr = 0.01). For each oscillation type, a series of characteristic modes (eigenfunctions) have been extracted from the velocity and temperature disturbances, and the POD provided spatial structures of the eigenfunctions, their oscillation frequencies, amplitudes, and phase shifts between them. The present analyses revealed the common features of the characteristic modes for different oscillation modes: four major velocity eigenfunctions captured more than 99% of the velocity fluctuation energy form two pairs, one of which is the most energetic. Different from the velocity disturbance, one of the major temperature eigenfunctions makes the dominant contribution to the temperature fluctuation energy. On the other hand, within the most energetic velocity eigenfuction pair, the two eigenfunctions have similar spatial structures and were tightly coupled to oscillate with the same frequency, and it was determined that the spatial structures and phase shifts of the eigenfunctions produced the different oscillatory disturbances. The interaction of other major modes only enriches the secondary spatio-temporal structures of the oscillatory disturbances. Moreover, the present analyses imply that the oscillatory disturbance, which is hydrodynamic in nature, primarily originates from the interior of the liquid bridge. (C) 2007 Elsevier B.V. All rights reserved.

An examination of fluctuations in the “concentration index” of purse seiners and baitboats in the fishery for tropical tunas in the Eastern Pacific, 1951-1961

ENGLISH: In the eastern Pacific Ocean nearly all of the commercial catches of yellowfin tuna (Thunnus albacares) and skipjack (Katsuwonus pelamis) are taken by two types of vessels, baitboats, which use pole and line in conjunction with live-bait, and purse-seiners. From its inception until very recently (1959), this fishery was dominated by baitboats. This method of fishing has been described by Godsil (1938) and Shimada and Schaefer (1956). From 1951 through 1958 baitboats caught between 66.4 and 90.8 per cent of the yellowfin and between 87.2 and 95.3 per cent of the skipjack landed by the California-based fleet. These vessels fished for tuna throughout the year and covered virtually all of the area from southern California to northern Chile. The purse-seine fishery for tunas developed out of the round-haul net fisheries for California sardines and other species. Scofield (1951) gives a detailed description of the development of gear and fishing methods. Prior to 1959 many of the seiners engaged in other fisheries during the fall and early winter months and consequently most of the fishing effort for tuna occurred in the period February-August. The vessels were quite small, averaging approximately 120 tons carrying capacity (Broadhead and Marshall, 1960), in comparison to the baitboats, of which the most numerous size-class was 201-300 tons. The seiners were naturally more restricted in range than the baitboats and most of their effort was restricted to the northern grounds. During the period 1959-61 most of the large baitboats were converted for purse-seining and the existing seiner fleet was modernized. These developments increased the range of the seiner fleet and resulted in a wider and more nearly even spatial and temporal distribution of effort. By the early part of 1961, the purse-seine fleet approximated the level of the preconversion baitboat fleet in amount of effort applied and area covered. The changes in the purse-seine fishery and the fishing methods employed in the modernized fleet are described by Orange and Broadhead (1959), Broadhead and Marshall (1960), McNeely (1961) and Broadhead (1962). The change in the relative importance of the two gears is illustrated by the decline in the proportion of the total logged tonnage landed by California-based baitboats, in comparison to the proportion landed by seiners. In 1959 baitboats landed 49.5 per cent of the yellowfin and 87.8 per cent of the skipjack. In 1960 these percentages were 22.9 and 74.7 respectively and in 1961 the decline continued to 12.6 per cent of the yellowfin and 30.0 per cent of the skipjack (Schaefer, 1962). In previous Bulletins of this Commission (Griffiths, 1960; Calkins, 1961) the baitboat catch and effort statistics were used to compute two indices of population density and an index of concentration of fishing effort and the fluctuations of these indices were analyzed in some detail. Due to the change in the relative importance of the two gears it is appropriate to extend this investigation to include the purse-seine data. The objectives of this paper are to compute two indices of population density and an index of concentration of fishing effort and to examine the fluctuations in these indices before and after the changes in the fishery. A further objective is to compare the purse-seine indices with those of the baitboats for the same time periods. SPANISH: En el Océano Pacífico Oriental casi todas las capturas comerciales del atún aleta amarilla (Thunnus albacares) y del barrilete (Katsuwonus pelamis) son efectuadas por dos tipos de barcos, los barcos de carnada que emplean la caña y el anzuelo en conjunto con la carnada viva, y los barcos rederos. Desde su comienzo hasta hace poco tiempo (1959), esta pesquería estaba dominada por los barcos de carnada. El método de pesca usado por estos barcos ha sido descrito por Godsil (1938) y por Shimada y Schaefer (1956). De 1951 a 1958, los barcos de carnada pescaron entre el 66.4 y el 90.8 por ciento del atún aleta amarilla y entre el 87.2 y el 95.3 por ciento del barrilete descargados por la flota que tiene su base en California. Estos barcos pescaron atún durante todo el año y cubrieron virtualmente toda el área de California meridional hasta la parte norte de Chile. La pesquería del atún con redes de cerco se originó en las pesquerías de las sardinas de California y otras especies, con redes que se remolcaban circularmente. Scofield (1951) dá una descripción detallada del desarrollo de los métodos y del equipo de pesca. Antes de 1959 muchos de los rederos se dedicaban a otras pesquerías durante los meses del otoño y a principios del invierno y consecuentemente, la mayor parte del esfuerzo depesca para la producción del atún ocurría en el período febrero-agosto. Las embarcaciones eran bastante pequeñas, con un promedio de aproximadamente 120 toneladas de capacidad para el transporte (Broadhead y Marshall, 1960) en comparación con los barcos de carnada, de los cuales la clase de tamaño más numerosa era de 201 a 300 toneladas. Los rederos estaban naturalmente más restringidos en su radio de acción que los barcos de carnada y la mayor parte de su esfuerzo se limitaba a las localidades del norte. Durante el período 1959-61, la mayoría de los grandes barcos de carnada fueron convertidos al sistema de pesca con redes de cerco, y se modernizó la flota existente de los rederos. Estos cambios aumentaron el alcance de la flota de los barcos rederos dando como resultado una distribución más amplia y casi más uniforme del esfuerzo espaciado y temporal. En la primera parte del año 1961, la flota de rederos se aproximó al nivel de la preconversión de la flota de clipers, en la cantidad de esfuerzo aplicado y al área comprendida. Los cambios en la pesquería con red y los métodos de pesca empleados en la flota modernizada, han sido descritos por Orange y Broadhead (1959), Broadl1ead y Marshall (1960), McNeely (1961) y Broadhead (1962). El cambio en la importancia relativa de los dos sistemas de pesca está ilustrado por la declinación en la proporción del tonelaje total registrado, como descargado por los barcos de carnada que tienen su base en California, comparado con la proporción desembarcada por los barcos rederos. En 1959 los clipers descargaron el 49.5 por ciento del atún aleta amarilla y el 87.8 por ciento del barrilete. En 1960 estos porcentajes fueron del 22.9 y 74.7 respectivamente, y en 1961 continuó la reducción hasta el 12.6 por ciento del atún aleta amarilla y el 30.0 por ciento del barrilete (Schaefer, 1962). En Boletines anteriores de la Comisión (Griffiths, 1960; Calkins, 1961) las estadísticas de la pesca y el esfuerzo de los clipers se utilizaron para computar dos índices de la densidad de población y un índice de la concentración del esfuerzo de pesca, y se analizaron algo detalladamente las fluctuaciones de estos índices. Debido al cambio en la importancia relativa de los dos sistemas de pesca, es conveniente extender esta investigación para incluir los datos correspondientes a los barcos rederos. Los objetivos del presente estudio son de computar dos índices de la densidad de población y un índice de la concentración del esfuerzo de pesca, y examinar las fluctuaciones en estos índices, antes y después de los cambios en la pesquería. Otro objetivo es de comparar los índices de los barcos rederos, con aquellos de los clipers en los mismos períodos de tiempo.

Frictional properties of faults : from observation on the Longitudinal Valley Fault, Taiwan, to dynamic simulations

Faults can slip either aseismically or through episodic seismic ruptures, but we still do not understand the factors which determine the partitioning between these two modes of slip. This challenge can now be addressed thanks to the dense set of geodetic and seismological networks that have been deployed in various areas with active tectonics. The data from such networks, as well as modern remote sensing techniques, indeed allow documenting of the spatial and temporal variability of slip mode and give some insight. This is the approach taken in this study, which is focused on the Longitudinal Valley Fault (LVF) in Eastern Taiwan. This fault is particularly appropriate since the very fast slip rate (about 5 cm/yr) is accommodated by both seismic and aseismic slip. Deformation of anthropogenic features shows that aseismic creep accounts for a significant fraction of fault slip near the surface, but this fault also released energy seismically, since it has produced five M_w>6.8 earthquakes in 1951 and 2003. Moreover, owing to the thrust component of slip, the fault zone is exhumed which allows investigation of deformation mechanisms. In order to put constraint on the factors that control the mode of slip, we apply a multidisciplinary approach that combines modeling of geodetic observations, structural analysis and numerical simulation of the "seismic cycle". Analyzing a dense set of geodetic and seismological data across the Longitudinal Valley, including campaign-mode GPS, continuous GPS (cGPS), leveling, accelerometric, and InSAR data, we document the partitioning between seismic and aseismic slip on the fault. For the time period 1992 to 2011, we found that about 80-90% of slip on the LVF in the 0-26 km seismogenic depth range is actually aseismic. The clay-rich Lichi M\'elange is identified as the key factor promoting creep at shallow depth. Microstructural investigations show that deformation within the fault zone must have resulted from a combination of frictional sliding at grain boundaries, cataclasis and pressure solution creep. Numerical modeling of earthquake sequences have been performed to investigate the possibility of reproducing the results from the kinematic inversion of geodetic and seismological data on the LVF. We first investigate the different modeling strategy that was developed to explore the role and relative importance of different factors on the manner in which slip accumulates on faults. We compare the results of quasi dynamic simulations and fully dynamic ones, and we conclude that ignoring the transient wave-mediated stress transfers would be inappropriate. We therefore carry on fully dynamic simulations and succeed in qualitatively reproducing the wide range of observations for the southern segment of the LVF. We conclude that the spatio-temporal evolution of fault slip on the Longitudinal Valley Fault over 1997-2011 is consistent to first order with prediction from a simple model in which a velocity-weakening patch is embedded in a velocity-strengthening area.

Conical emission of Ti : sapphire femtosecond laser pulses propagating in water

Conical emission is investigated for Ti:sapphire femtosecond laser pulses propagating in water. The colored rings can be observed in the forward direction due to the constructive and destructive interference of transverse wavevector, which are induced by the spatio-temporal gradient of the free-electron density. With increasing input laser energy, due to filamentation and pulse splitting induced by the plasma created by multiphoton excitation of electrons from the valence band to the conduction band, the on-axis spectrum of the conical emission is widely broadened and strongly modulated with respect to input laser spectrum, and finally remains fairly constant at higher laser energy due to intensity clamping in the filaments.

Wide Field-of-view Microscopes and Endoscopes for Time-lapse Imaging and High-throughput Screening

Wide field-of-view (FOV) microscopy is of high importance to biological research and clinical diagnosis where a high-throughput screening of samples is needed. This thesis presents the development of several novel wide FOV imaging technologies and demonstrates their capabilities in longitudinal imaging of living organisms, on the scale of viral plaques to live cells and tissues.

The ePetri Dish is a wide FOV on-chip bright-field microscope. Here we applied an ePetri platform for plaque analysis of murine norovirus 1 (MNV-1). The ePetri offers the ability to dynamically track plaques at the individual cell death event level over a wide FOV of 6 mm × 4 mm at 30 min intervals. A density-based clustering algorithm is used to analyze the spatial-temporal distribution of cell death events to identify plaques at their earliest stages. We also demonstrate the capabilities of the ePetri in viral titer count and dynamically monitoring plaque formation, growth, and the influence of antiviral drugs.

We developed another wide FOV imaging technique, the Talbot microscope, for the fluorescence imaging of live cells. The Talbot microscope takes advantage of the Talbot effect and can generate a focal spot array to scan the fluorescence samples directly on-chip. It has a resolution of 1.2 μm and a FOV of ~13 mm². We further upgraded the Talbot microscope for the long-term time-lapse fluorescence imaging of live cell cultures, and analyzed the cells’ dynamic response to an anticancer drug.

We present two wide FOV endoscopes for tissue imaging, named the AnCam and the PanCam. The AnCam is based on the contact image sensor (CIS) technology, and can scan the whole anal canal within 10 seconds with a resolution of 89 μm, a maximum FOV of 100 mm × 120 mm, and a depth-of-field (DOF) of 0.65 mm. We also demonstrate the performance of the AnCam in whole anal canal imaging in both animal models and real patients. In addition to this, the PanCam is based on a smartphone platform integrated with a panoramic annular lens (PAL), and can capture a FOV of 18 mm × 120 mm in a single shot with a resolution of 100─140 μm. In this work we demonstrate the PanCam’s performance in imaging a stained tissue sample.

The temperature dependence of the development of the embryo in Mesocyclops leuckarti (Claus) and Cyclops scutifer

This work is mainly intended as an addition to the studies of the populations dynamics of Cyclops scutifer, which is part of the ”Latn ja jaure project” (a study of the principles involved in the ecosystem of a small -initially fish free- mountain lake, before and after the introduction of fish). The field work consisted of sampling in Lake Erken in Roslagen in June, July and September, as well as in Latn ja jaure in the Abisko mountains in August and September of 1965. Additional sampling was done in Latn ja jaure for the study of the horizontal, vertical and temporal distribution of Cyclops scutifer, as well as the in situ development of the different stages. These samples have been analysed in such a way as to fit into the frame work of future studies on the population dynamics of Cyclops scutifer, The main aim of the present investigation is the determination of the dependence upon tempera- tare of the development of the embryo in the subarctic Cyclops scutifer as compared with the conditions found in the warm water species Mesocyclops leuckarti.

From molecules to organs : Microscopy and multi-scale nature of development

Morphogenesis is a phenomenon of intricate balance and dynamic interplay between processes occurring at a wide range of scales (spatial, temporal and energetic). During development, a variety of physical mechanisms are employed by tissues to simultaneously pattern, move, and differentiate based on information exchange between constituent cells, perhaps more than at any other time during an organism's life. To fully understand such events, a combined theoretical and experimental framework is required to assist in deciphering the correlations at both structural and functional levels at scales that include the intracellular and tissue levels as well as organs and organ systems. Microscopy, especially diffraction-limited light microscopy, has emerged as a central tool to capture the spatio-temporal context of life processes. Imaging has the unique advantage of watching biological events as they unfold over time at single-cell resolution in the intact animal. In this work I present a range of problems in morphogenesis, each unique in its requirements for novel quantitative imaging both in terms of the technique and analysis. Understanding the molecular basis for a developmental process involves investigating how genes and their products- mRNA and proteins-function in the context of a cell. Structural information holds the key to insights into mechanisms and imaging fixed specimens paves the first step towards deciphering gene function. The work presented in this thesis starts with the demonstration that the fluorescent signal from the challenging environment of whole-mount imaging, obtained by in situ hybridization chain reaction (HCR), scales linearly with the number of copies of target mRNA to provide quantitative sub-cellular mapping of mRNA expression within intact vertebrate embryos. The work then progresses to address aspects of imaging live embryonic development in a number of species. While processes such as avian cartilage growth require high spatial resolution and lower time resolution, dynamic events during zebrafish somitogenesis require higher time resolution to capture the protein localization as the somites mature. The requirements on imaging are even more stringent in case of the embryonic zebrafish heart that beats with a frequency of ~ 2-2.5 Hz, thereby requiring very fast imaging techniques based on two-photon light sheet microscope to capture its dynamics. In each of the hitherto-mentioned cases, ranging from the level of molecules to organs, an imaging framework is developed, both in terms of technique and analysis to allow quantitative assessment of the process in vivo. Overall the work presented in this thesis combines new quantitative tools with novel microscopy for the precise understanding of processes in embryonic development.

Observations and Modeling of Tropical Planetary Atmospheres

This thesis is a comprised of three different projects within the topic of tropical atmospheric dynamics. First, I analyze observations of thermal radiation from Saturn’s atmosphere and from them, determine the latitudinal distribution of ammonia vapor near the 1.5-bar pressure level. The most prominent feature of the observations is the high brightness temperature of Saturn’s subtropical latitudes on either side of the equator. After comparing the observations to a microwave radiative transfer model, I find that these subtropical bands require very low ammonia relative humidity below the ammonia cloud layer in order to achieve the high brightness temperatures observed. We suggest that these bright subtropical bands represent dry zones created by a meridionally overturning circulation.

Second, I use a dry atmospheric general circulation model to study equatorial superrotation in terrestrial atmospheres. A wide range of atmospheres are simulated by varying three parameters: the pole-equator radiative equilibrium temperature contrast, the convective lapse rate, and the planetary rotation rate. A scaling theory is developed that establishes conditions under which superrotation occurs in terrestrial atmospheres. The scaling arguments show that superrotation is favored when the off-equatorial baroclinicity and planetary rotation rates are low. Similarly, superrotation is favored when the convective heating strengthens, which may account for the superrotation seen in extreme global-warming simulations.

Third, I use a moist slab-ocean general circulation model to study the impact of a zonally-symmetric continent on the distribution of monsoonal precipitation. I show that adding a hemispheric asymmetry in surface heat capacity is sufficient to cause symmetry breaking in both the spatial and temporal distribution of precipitation. This spatial symmetry breaking can be understood from a large-scale energetic perspective, while the temporal symmetry breaking requires consideration of the dynamical response to the heat capacity asymmetry and the seasonal cycle of insolation. Interestingly, the idealized monsoonal precipitation bears resemblance to precipitation in the Indian monsoon sector, suggesting that this work may provide insight into the causes of the temporally asymmetric distribution of precipitation over southeast Asia.

Development of a sampling expert system:"FISHMAP"

This research program consisted of three major component areas: (I) development of experimental design, (II) calibration of the trawl design, and (III) development of the foundation for stock assessment analysis. The products which have I. EXPERIMENTAL DESIGN resulted from - the program are indicated below: The study was successful in identifying spatial and temporal distribution characteristics of the several key species, and the relationships between given species catches and environmental and physical factors which are thought to influence species abundance by areas within the mainstem of the Chesapeake Bay and tributaries

SAQUA - sistema baseado em software livre para análise do comportamento da qualidade das águas fluviais: aplicado à bacia do rio Paraíba do Sul.

Nesta dissertação foi desenvolvido o sistema SAQUA (Sistema para Análise da Qualidade das Águas Fluviais), que permite o acompanhamento dos dados de séries históricas de parâmetros físico-químicos para análise da qualidade de águas fluviais. A alimentação do sistema SAQUA se dá a partir do arquivo tipo texto gerado no Hidroweb, sistema de banco de dados hidrológicos da ANA (Agência Nacional de Águas), disponibilizado na internet. O SAQUA constitui uma interface que permite a análise espaço-temporal de parâmetros de qualidade da água específicos definidos pelo usuário. A interface foi construída utilizando o servidor de mapas Mapserver, as linguagens HTML e PHP, além de consultas SQL e o uso do servidor Web Apache. A utilização de uma linguagem dinâmica como o PHP permitiu usar recursos internos do Mapserver por meio de funções que interagem de forma mais flexível com códigos presentes e futuros, além de interagir com o código HTML. O Sistema apresenta como resultado a representação gráfica da série histórica por parâmetro e, em mapa, a localização das estações em análise também definidas pelo usuário, geralmente associadas a uma determinada região hidrográfica. Tanto na representação gráfica da série temporal quanto em mapa, são destacados a partir de código de cores a estação de monitoramento e a observação em que os limites estabelecidos na resolução CONAMA 357/05 não foi atendido. A classe de uso da resolução CONAMA que será usada na análise também pode ser definida pelo usuário. Como caso de estudo e demonstração das funções do SAQUA foi escolhida a bacia hidrográfica do rio Paraíba do Sul, localizada na região hidrográfica Atlântico Sudeste do Brasil. A aplicação do sistema demonstrou ótimos resultados e o potencial da ferramenta computacional como apoio ao planejamento e à gestão dos recursos hídricos. Ressalta-se ainda, que todo o sistema foi desenvolvido a partir de softwares disponibilizados segundo a licença GPL de software livre, ou seja, sem custo na aquisição de licenças, demonstrando o potencial da aplicação destas ferramentas no campo dos recursos hídricos.

Non-Linear Scale Interactions in a Forced Turbulent Boundary Layer

This thesis explores the dynamics of scale interactions in a turbulent boundary layer through a forcing-response type experimental study. An emphasis is placed on the analysis of triadic wavenumber interactions since the governing Navier-Stokes equations for the flow necessitate a direct coupling between triadically consist scales. Two sets of experiments were performed in which deterministic disturbances were introduced into the flow using a spatially-impulsive dynamic wall perturbation. Hotwire anemometry was employed to measure the downstream turbulent velocity and study the flow response to the external forcing. In the first set of experiments, which were based on a recent investigation of dynamic forcing effects in a turbulent boundary layer, a 2D (spanwise constant) spatio-temporal normal mode was excited in the flow; the streamwise length and time scales of the synthetic mode roughly correspond to the very-large-scale-motions (VLSM) found naturally in canonical flows. Correlation studies between the large- and small-scale velocity signals reveal an alteration of the natural phase relations between scales by the synthetic mode. In particular, a strong phase-locking or organizing effect is seen on directly coupled small-scales through triadic interactions. Having characterized the bulk influence of a single energetic mode on the flow dynamics, a second set of experiments aimed at isolating specific triadic interactions was performed. Two distinct 2D large-scale normal modes were excited in the flow, and the response at the corresponding sum and difference wavenumbers was isolated from the turbulent signals. Results from this experiment serve as an unique demonstration of direct non-linear interactions in a fully turbulent wall-bounded flow, and allow for examination of phase relationships involving specific interacting scales. A direct connection is also made to the Navier-Stokes resolvent operator framework developed in recent literature. Results and analysis from the present work offer insights into the dynamical structure of wall turbulence, and have interesting implications for design of practical turbulence manipulation or control strategies.

Biogeography of bacterioplankton in inland waters

Bacteria are among the most abundant groups of organisms. They mediate key ecological processes. Recent molecular advances have provided greater insight into bacterial diversity as well as allowing a more thorough examination of patterns in the spatial and temporal distribution of bacteria. Thus, the study of bacterial biodiversity and biogeographical distribution has stimulated considerable interest and dispute over the last decade. This review summarises the findings obtained from studies on the biogeography of bacterioplankton in inland waters. We examine factors and processes that may determine and maintain bacterial diversity and biogeography, and relate these to the theoretical metacommunity framework. We conclude that the importance of local environmental factors (such as lake character) for local bacterioplankton community compositions (BCC) is much more intensively studied than the importance of regional factors, such as dispersal. Further, few attempts have been made to evaluate simultaneously the relative importance of the two types of factors for BCC. Finally, we summarise gaps in knowledge, delineate challenges and put forward possible future research directions.

Análise da tectônica de colocação de diques cretácicos na região de São Sebastião, SP

O trabalho foi desenvolvido no litoral norte do estado de São Paulo, onde ocorrem boas exposições de rochas intrusivas da porção meridional do Enxame de Diques da Serra do Mar, de idade eocretácica. O objetivo principal da dissertação é caracterizar os regimes tectônicos associados à colocação e à deformação de diques máficos na área de São Sebastião (SP) e sua distribuição espacial, a partir de interpretações de imagens de sensores remotos, análise de dados estruturais de campo e descrição petrográfica das rochas ígneas. A área apresenta grande complexidade no tocante ao magmatismo, uma vez que ocorrem diques de diabásios toleítico e alcalino, lamprófiro e rochas alcalinas félsicas como fonolitos, traquitos e sienitos, estes sob a forma diques, sills e plugs. Os diabásios toleíticos tem idades em torno 134 Ma, correlatas com o início do rifteamento sul-atlântico, enquanto que as rochas alcalinas datam de 86 Ma e estão relacionadas com um magmatismo intraplaca posterior. Os lineamentos estruturais orientam-se majoritariamente na direção ENE-WSW, paralela às foliações metamórficas e zonas de cisalhamento observadas no campo e descritas na literatura, referentes ao Domínio Costeiro da Faixa Ribeira. Os diques se orientam na direção NE-SW, com azimute semelhante porém ângulos de mergulho discordantes da foliação em grande parte da área, onde as foliações são de baixo ângulo. Um segundo conjunto de lineamentos orientado NW-SE ocorre como um importante conjunto de fraturas que cortam tanto as rochas do embasamento proterozóico quanto as rochas alcalinas neocretácicas. Diques com esta orientação são escassos. Um terceiro conjunto NNE-SSW ocorre na porção oeste da área, associado à presença de diques de diabásio que por vezes mostram indicadores de movimentação sinistral. A análise cinemática dos diques mostra um predomínio de distensão pura durante sua colocação, com um tensor de compressão mínima de orientação NW-SE, ortogonal ao principal trend dos diques. Componentes direcionais, por vezes ambíguas, são comumente observadas, com um discreto predomínio de componente sinistral. O mesmo padrão cinemático é observado para os diques toleíticos e para os alcalinos, sugerindo que o campo de tensões local pouco variou durante o Cretáceo. Embora o embasamento não tenha sido diretamente reativado durante a colocação dos diques, sua anisotropia pode ter controlado de certa forma a orientação do campo de tensões local durante o Cretáceo. Os mapas geofísicos da bacia de Santos existentes na literatura sugerem certo paralelismo entre as estruturas observadas na área de estudo e aquelas interpretadas na bacia. As estruturas NNE-SSW são paralelas ao trend das sub-bacias e ao gráben de Merluza, enquanto que as estruturas NW-SE são paralelas a zonas de transferência descritas na literatura.

Reprodução de peixes de riachos: uma abordagem comparativa entre as estratégias r e K

No presente trabalho, objetivou-se caracterizar a estratégia reprodutiva, enfatizando o investimento energético, de duas espécies de peixe do rio Ubatiba, Maricá, Rio de Janeiro: Parotocinclus maculicauda (K-estrategista) e Astyanax hastatus (r-estrategista). Foram realizadas coletas bimestrais de Junho de 2010 a Abril de 2011 totalizando 236 exemplares amostrados de A. hastatus e 234 de P. maculicauda. Para cada exemplar foram registrados os dados de comprimento padrão (Cp, cm), peso total (Pt, g), peso gonadal (Pg, g), sexo e estádio de maturação. Através da estrutura de tamanho, observamos que as fêmeas atingem maior comprimento, em relação aos machos, para as duas espécies. A relação peso/ comprimento evidenciou para ambas as espécies, crescimento alométrico negativo (inferior a 3), demonstrando crescimento mais longelíneo. Para a proporção sexual, o teste χ2 foi aplicado e indicou que, para as duas espécies, há significativamente mais fêmeas. A distribuição sexual no ano mostrou que as fêmeas se mantêm em maioria durante todo o ano para P. maculicauda. Para A. hastatus este padrão também se mantém, porém com exceção do bimestre Novembro/Dezembro, quando o número de machos torna-se um pouco maior. O tamanho de primeira maturação mostrou-se o mesmo para ambas as espécies (2,5 a 3,0 cm). A variação temporal da freqüência de indivíduos reprodutivos e não reprodutivos juntamente com a distribuição temporal dos valores individuais de IGS mostrou que P. maculicauda se reproduz com maior intensidade nas estações chuvosas (Setembro a Abril), reduzindo sua atividade reprodutiva de maneira significativa nas estações secas (Maio a Agosto). Já A. hastatus demonstrou regular atividade reprodutiva durante todo o ano com pequeno pico no bimestre Novembro/ Dezembro. Desova do tipo total foi registrada para Astyanax, enquanto que para Parotocinclus registrou-se desova parcelada em três lotes. Em ambas as espécies foi observada relação inversa entre volume e a quantidade de ovócitos produzidos, com A. hastatus produzindo muitos ovócitos (fecundidade: 463 + 213 ovócitos/grama de peixe) de reduzido volume (diâmetro = 800 μm e volume = 0,26 mm3) e P. maculicauda produzindo número bem inferior (fecundidade: 47 + 13 ovócitos/grama de peixe), porém com volume superior (diâmetro = 1.600 μm e volume = 2,14 mm3). Com isso o valor energético relativo também se mostrou superior, com A. hastaus produzindo ovócitos vitelogênicos com 0,4+ 0,08 cal/unidade e P. maculicauda produzindo os mesmos ovócitos com 1,8+ 1,1 cal/unidade. Para a produção energética total investida na produção de gametas, foi considerado o tipo de desova de cada espécie, com Astyanax investindo 50,5 + 24 calorias/grama/grama de peixe e Parotocinclus investindo 88,4 + 72,46 cal/grama/grama de peixe, porém sem diferenças significativas (Mann-Whitney; U =235,0, p=0,08), indicando, portanto que independente da estratégia adotada (r ou K), o gasto energético na produção de ovócitos é a mesma.

Simulação de elevação do nível do mar na praia do Leme - RJ.

Os crescentes alertas sobre as mudanças climáticas e suas consequências vêm preocupando a sociedade de modo geral. Geram dúvidas sobre as reais modificações que podem ser ocasionadas, principalmente com relação aos efeitos da elevação do nível médio dos oceanos e seus efeitos nas regiões costeiras. Por vezes, as informações veiculadas contribuem para uma percepção limitada da extensão espaço-temporal dos fenômenos. Em paralelo, a democratização de mapas 2D e 3D está cada vez mais ampla, não sendo mais uma ferramenta direcionada apenas aos profissionais ligados à área da Cartografia e demais Geociências. Este é um dos enormes benefícios proporcionados pela Cartografia Digital. Porém, não teria tanto alcance sem a associação das informações a um poderoso veículo de divulgação como a Web. A Internet é um dos meios de comunicação mais democráticos do mundo e uma ferramenta de grande alcance na sociedade. O uso dessas ferramentas pode ser ainda mais explorado para a construção do conhecimento, permitindo aos cidadãos entenderem mais facilmente um determinado fenômeno por meio da sua visualização/simulação em tempo real. Isto melhora a formação de opinião e o posicionamento da sociedade sobre o caso em questão. Com base nessa argumentação, esta dissertação tem o objetivo de simular cenários de elevações do nível médio do mar e disponibilizá-los em formato de mapas interativos na Web utilizando um Modelo Digital de Elevação suficientemente acurado. Para isto, a área de estudo escolhida foi a Praia do Leme, situada no município do Rio de Janeiro, RJ. Os processos para atingir os objetivos envolveram etapas de coleta de dados de campo, confecção de um banco de dados integrado a dados pré-existentes, interpolações, simulação de cenários da elevação do nível do mar e implementação de uma página Web. Os cenários investigados foram obtidos por simulações de elevações do nível do mar a cada 0,5m até 4,0m acima da cota atual. Os resultados obtidos mostram que a Praia do Leme sofrerá modificações geomorfológicas, com perda de até 18,0m da praia, para uma elevação do nível médio do mar de 2,0m. Entretanto, a orla litorânea sofrerá impactos significativos a partir de uma elevação do nível do mar de 3,0m, em que o avanço planimétrico do mar pode ficar entre 76 e 90m, o que atingiria o calçadão e a região do emissário de águas pluviais do Leme, respectivamente. Isto resultaria em um volume adicional de água na praia de, aproximadamente, 106.000m3 e uma perda de até 41.400m3 de areia. Somente a partir de 3,5m de elevação, o mar atingiria a Avenida Atlântica, sendo que, desta altitude em diante, todo o bairro do Leme seria gradualmente inundado pelo avanço do mar.