Diversidade genética do sistema HLA em Portugal, Cabo Verde e Guiné-Bissau

O polimorfismo dos genes HLA-A, HLA-B e HLA-DRB1 foi estudado em três populações Portuguesas (Portugal continental, Madeira e Açores) e em duas Africanas (Guiné-Bissau e Cabo Verde). Os dados em alta resolução, obtidos por sequenciação (SBT), foram comparados com a caracterização efectuada pelo método SSOP revelando 4,6% de incongruências entre os resultados destes dois métodos. Os alelos mais frequentes em cada um dos loci foram: HLA-A*0201 em todas as populações (13,5-26%); HLA-B*5101 em Portugal continental (12%, o mesmo para o B*440301), Madeira (9,7%) e Açores (9,8%) e B*350101 na Guiné-Bissau (14,4%) e Cabo Verde (13,2%); HLADRB1*0701 em Portugal continental (15%), Madeira (15,7%) e Açores (18,3%), DRB1*1304 na Guiné-Bissau (19,6%) e DRB1*110101 em Cabo Verde (10,1%). Os haplotipos 3-loci mais predominantes em cada população foram: A*020101-B*440301-DRB1*070101 em Portugal continental (3,1%), A*020101-B*510101- DRB1*130101 na Madeira (2,7%), A*2902-B*4403-DRB1*0701 nos Açores (2,4%), A*2301-B*1503-DRB1*110101 na Guiné-Bissau (4,6%) e A*3002-B*350101-DRB1*1001 em Cabo Verde (2,8%). O presente trabalho revela que a população continental Portuguesa tem sido influenciada geneticamente por Europeus e Norte Africanos devido a várias imigrações históricas. O Norte de Portugal parece concentrar, provavelmente devido à pressão da expansão Árabe, um antigo pool genético originado pela influência milenar de Europeus e Norte Africanos. Os dados obtidos nos genes do sistema HLA corroboram as fontes históricas que confirmam que o povoamento dos Açores teve o contributo de outros Europeus, essencialmente Flamengos, para além dos Portugueses. As frequências alélicas e haplotípicas neste arquipélago não apresentam uma distribuição homogénea entre as ilhas do grupo Oriental e Central. O grupo Central revela uma influência clara daEuropa Central e uma muito menor afinidade a Portugal continental. As frequências alélicas e haplotípicas mostram que a ilha da Madeira foi povoada por Europeus, a maioria Portugueses, mas também por sub-Saharianos devido ao comércio de escravos. Cabo Verde não é uma população tipicamente sub-Sahariana pois revela uma importante influência genética Europeia, para além da base genética Africana. A análise dos haplotipos e dendrogramas mostram uma influência genética Caucasiana no actual pool genético Cabo-Verdiano. Os dendrogramas e a análise das coordenadas principais mostram que os Guineenses são mais semelhantes aos Norte Africanos do que qualquer outra população sub-Sahariana já estudada ao nível do sistema HLA, provavelmente devido a contactos históricos com outros povos, nomeadamente Árabes do Este Africano e Berberes.

The historic religious buildings of Ribeira Grande: implementation of christian models in the early colonies, 15th till 17th century, on the example of Cape Verde Islands

Rui Carita

Aplicação do processamento de sinal à análise e síntese de agrupamentos

Universidade do Algarve

Mar cruzado e terra bilingue: uma breve abordagem sociolinguística das línguas de Cabo Verde

O objetivo da presente dissertação de Mestrado consiste em refletir sobre o conjunto das representações e atitudes dos cabo-verdianos perante as línguas: o Crioulo e o Português. Como surgiu o Crioulo cabo-verdiano (daqui em diante Ccv)? Em que medida se pode falar da sua unidade e diversidade? Qual o futuro dessa língua nacional? Como convive com a Língua portuguesa (Lp daqui para frente), a língua oficial do país? Na verdade, pretendo retratar, usando os dados de todos conhecidos, a situação sociolinguística de Cabo Verde, sabendo-se que esse Arquipélago, situado ao largo da costa ocidental da África, era desabitado até à chegada dos portugueses no século XV. Com a colonização e importação de escravos do continente, desenvolveu-se no Arquipélago uma língua crioula de base lexical portuguesa, que é hoje a língua materna da grande maioria dos seus habitantes. Este “olhar de fora” sobre a situação linguística cabo-verdiana, elaborado por um estrangeiro não-residente em Cabo Verde, fruto da investigação desenvolvida no âmbito do mestrado em Estudos Regionais e Locais, tem como objetivo questionar o presente e o futuro do convívio entre o Crioulo e o Português nessa sociedade e cultura insulares de conformação mestiça. Para o efeito, o estudo faz um levantamento de algumas questões associadas a esta área da Linguística (Sociolinguística e Política linguística) e dos resultados da investigação ressaltam o bilinguismo com diglossia e o debate aceso entre alguns intelectuais falantes do Crioulo, em torno da oficialização da língua materna em paridade com a língua portuguesa, passados que foram trinta e oito anos (1975-2014), após a independência política do arquipélago de Cabo Verde.

Qualidade de vida no trabalho da Emater-RN: validação de um instrumento síntese de pesquisa e diagnóstico

The theoretical recital of the present study it is initiated of the evidence that the work occupies an important space in the man s life in way that the majority of the people works and passes great part of its time inside organizati ons. However, it is verified that the relation between man and work is becoming increasingly disagreement a time that the employees had started to complain work s routines, stress, not use all their potential and inadequate work s conditions. It can be observed by the way of Dejours (1994) studies. Thus, as contribution for the quality of work life s (QWL) studies the research developed here objectified to characterize the public employees quality of work life at EMATER -RN taking as reference an instrumen t of research synthesized from the typical academic literature of the subject. The synthesis of an ampler instrument is a necessity not taken care to the literature that treats on the subject but already perceived by some studies like Moraes et al (1990); Rodrigues (1989); Siqueira & Coleta (1989); Moraes et al (1992); Carvalho & Souza (2003); El -Aouar & Souza (2003) and Mourão, Kilimnick & Fernandes (2005); Adorno, Marques & Borges (2005) amongst others. These studies point out weak points of the existing models in the QWL s literature, as well as they recommend the elaboration of a model more flexible, that contemplates Brazilian cultural characteristics, and that contemplates the entire variable studied in the main existing models. For reach this objectiv e the adopted methodology was characterized as a case study with collected data in qualitative and quantitative way. Questionnaires and comments had been used as sources of evidences. These evidences had been tabulated through of statistical package SPSS ( Statistical Package for Social Science), in which the main technique of multivariate analysis used were the factorial analysis. As for the gotten results, it was verified the grouping of the quality of work life s indicators in 11 factors which are: Work s execution, Individual accomplishment, Work s equity, Relation individual and organization, Work s organization, Adequacy of the remuneration, Relation between head and subordinate, Effectiveness of the communication and the learning, Relation between work and personal life, Participation and Effectiveness of the work processes. Whatever to the characterization of the EMATER -RN s quality of work life it was clearly that to the measure that the satisfaction s evaluation with the QWL in the organization walks to intrinsic factors for extrinsic factors this level of satisfaction goes diminishing what points to the importance to improve these extrinsic factors in the institution. In summary it is possible to conclude that the organization studied has offered a significant set of referring variable to the quality of work life of the individual

Práticas da ti verde que contribuem para o desenvolvimento sustentável: um estudo de caso em indústrias do RN

This dissertation aims to describe the practices of Information Technology Green contributing to sustainable development, in computers and textile industries in the state of Rio Grande do Norte. The goal is to understand the importance and contribution of IT Green for sustainable development. The research methodology used involved a survey of the theoretical approach prepared, involving two case studies in industries of Rio Grande do Norte. The analysis was supported by an analysis of content, which allowed the understanding of the phenomenon of the Information Technology Green sustainable development in the case studies. In conclusion, is that the Green Information Technology contributes to sustainable development, even so through incipient aspects that highlight the competitive business with a focus on cost reduction, and efforts in sustainable practices

Cultura como desenvolvimento entre os Paresi Kozarini

The proposal of the present study is to get to know and to analyze the building up of the culture notion among the participants of the Paresi Kozarini group in the ethnodevelopment context. The main focus is the ethnographic study, presenting a description of Aldeia Rio Verde (Paresi Indigenous Land), understanding it as a synthesis of historic processes which explains the current moment of Paresi Indigenous group. By using the mentioned methodology, the processes and social relations produced along the contact path of this group with regional-national culture were focused, and how that contact affects the present. The research questions which concern the present study refer to the processes of identification of the researched subjects about themselves and in relation to others. According as almost the totality of the indigenous group we usually know as Paresi, recognize itself as Kozarini, the attention is directed to the manner how they see themselves and how they differ from the other Paresi groups, not indigenous people, and other indigenous groups; and which meanings of the prefix ethno- (which culture elements) they have elected to represent and manage external matters to their culture and society, in the context of discussions about ethnodevelopment

Investigação e avaliação da toxicidade aguda dos agrotóxicos mais utilizados no cinturão verde da Grande Natal (RN, Brasil) para o peixe-zebra (Danio rerio Hamilton Buchanan, 1822, Teleostei, Cyprinidae

The objectives of this research were to investigate the agrotoxic most used in the Gramorezinho region in the green belt of Natal, and to evaluate the acute toxicity of these, based on the LC50-48h values estimated in tests for Danio rerio, internationally used as test organism. The acute toxicity tests were performed under laboratory conditions, according to standardized methods (ABNT/NBR/15088/04) for this species. The LC50-48h estimated to Tamaron BR was 352.89 mg.L-1, which characterizes that as practically non-toxic, according to toxicological classes cited by Zucker. For Decis 25EC, the LC50-48h estimated was 0.0004156 mg.L-1 (4.156 X 10-4 mg.L-1), which classifies it as highly toxic to this species

Estudo da síntese e sinterização de pós compósitos do sistema Ta-Cu

Ta-Cu bulk composites combine high mechanical resistance of the Ta with high electrical and thermal conductivity of the Cu. These are important characteristics to electrical contacts, microwave absorber and heat skinks. However, the low wettability of Ta under Cu liquid and insolubility mutual these elements come hard sintering this composite. High-energy milling (HEM) produces composite powders with high homogeneity and refines the grain size. This work focus to study Ta-20wt%Cu composite powders prepared by mechanical mixture and HEM with two different conditions of milling in a planetary ball mill and then their sintering using hydrogen plasma furnace and a resistive vacuum furnace. After milling, the powders were pressed in a steel dye at a pressure of 200 MPa. The cylindrical samples pressed were sintered by resistive vacuum furnace at 10-4torr with a sintering temperature at 1100ºC / 60 minutes and with heat rate at 10ºC/min and were sintered by plasma furnace with sintering temperatures at 550, 660 and 800ºC without isotherm under hydrogen atmosphere with heat rate at 80ºC/min. The characterizations of the powders produced were analyzed by scanning electron microscopy (SEM), x-ray diffraction (XRD) and laser granulometry. After the sintering the samples were analyzed by SEM, XRD and density and mass loss tests. The results had shown that to high intense milling condition produced composite particles with shorter milling time and amorphization of both phases after 50 hours of milling. The composite particles can produce denser structure than mixed powders, if heated above the Cu melting point. After the Cu to arrive in the melting point, liquid copper leaves the composite particles and fills the pores

Obtenção e caracterização de nanopartículas de argilominerais

Natural nanoclays are of great interest particularly for the production of polymer-based nanocomposites. In this work, kaolinite clays from two natural deposits in the State of the Rio Grande do Norte and Paraiba were purified with thermal treatment and chemical treatments, and characterized. Front to the gotten data, had been proposals methodologies for elimination or reduction of coarse particle texts, oxide of iron and organic substance. These methodologies had consisted of the combination of operations with thermal treatments, carried through in electric oven, and acid chemical attacks with and hydrogen peroxide. The Analyzers Thermogravimetric was used to examine the thermal stability of the nanoclays. The analysis indicated weight losses at temperatures under 110 ºC and over the temperature range of 350 to 550 ºC. Based on the thermal analysis data, the samples were submitted to a thermal treatment at 500 °C, for 8 h, to remove organic components. The X-ray diffraction patterns indicated that thermal treatment under 500 °C affect the basic structure of kaolinite. The BET surface area measurements ranged from 32 to 38 m2/g for clay samples with thermal treatment and from 36 to 53 m2/g for chemically treated samples. Thus, although the thermal treatment increased the surface area, through the removal of organic components, the effect was not significant and chemical treatment is more efficient, not affect the basic structure of kaolinite, to improve particle dispersion. SEM analysis confirms that the clay is agglomerated forming micron-size particles

Síntese, caracterização e estudo da regeneração do silicoaluminofosfato-11 (SAPO-11)

heterogeneous catalyst such as a silicoaluminophosphate, molecular sieve with AEL (Aluminophosphate eleven) structure such as SAPO-11, was synthesized through the hydrothermal method starting from silica, pseudoboehmite, orthophosphoric acid (85%) and water, in the presence of a di-isopropylamine organic template. For the preparation of SAPO-11 in a dry basis it was used as reactants: DIPA; H3PO4; SiO4; Pseudoboehmite and distilled water. The crystallization process occurred when the reactive hydrogel was charged into a vessel and autoclaved at 200ºC for a period of 72 hours under autogeneous pressure. The obtained material was washed, dried and calcined to remove the molecular sieves of DIPA. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (FT-IR), nitrogen adsorption (BET) and thermal analysis (TG/DTG). The acidic properties were determined using adsorption of nbutylamine followed by programmed thermodessorption. This method revealed that SAPO-11 shows an acidity that ranges from weak to moderate. However, a small quantity of strong acid sites could be detected there. The deactivation of the catalysts was conducted by artificial coking followed by the cracking of the n-hexane in a fixed bed with a continuous flow micro-reactor coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the regeneration and removal of the coke

Síntese e caracterização de NiO-CGO para anodo e eletrólitos sólidos e base de Céria para SOFC

The direct use of natural gas makes the Solid Oxide Fuel Cell (SOFC) potentially more competitive with the current energy conversions technologies. The Intermediate Temperature SOFC (IT-SOFC) offer several advantages over the High Temperature SOFC (HT-SOFC), which includes better thermal compatibility among components, fast start with lower energy consumption, manufacture and operation cost reduction. The CeO2 based materials are alternatives to the Yttria Stabilized Zirconia (YSZ) to application in SOFC, as they have higher ionic conductivity and less ohmic losses comparing to YSZ, and they can operate at lower temperatures (500-800°C). Ceria has been doped with a variety of cations, although, the Gd3+ has the ionic radius closest to the ideal one to form solid solution. These electrolytes based in ceria require special electrodes with a higher performance and chemical and termomechanical compatibility. In this work compounds of gadolinia-doped ceria, Ce1-xGdxO2-δ (x = 0,1; 0,2 and 0,3), used as electrolytes, were synthesized by polymeric precursors method, Pechini, as well as the composite material NiO - Ce0,9Gd0,1O1,95, used as anode, also attained by oxide mixture method, mixturing the powders of the both phases calcinated already. The materials were characterized by X ray diffraction, dilatometry and scanning electronic microscopy. The refinement of the diffraction data indicated that all the Ce1-xGdxO2-δ powders were crystallized in a unique cubic phase with fluorite structure, and the composite synthesized by Pechini method produced smaller crystallite size in comparison with the same material attained by oxide mixture method. All the produced powders had nanometric characteristics. The composite produced by Pechini method has microstructural characteristics that can increase the triple phase boundaries (TPB) in the anode, improving the cell efficiency, as well as reducing the mass transport mechanism effect that provokes anode degradation

Síntese, caracterização e cinética da decomposição térmica dos materiais cerâmicos PrMO3 (M = Ni ou Co)

In this work have been studied the preparation, characterization and kinetic study of decomposition of the polymerizing agent used in the synthesis under non-isothermal condition ceramics PrMO3 of general formula (M = Co and Ni). These materials were obtained starting from the respective metal nitrates, as a cations source, and making use of gelatin as polymerizing agent. The powders were calcined at temperatures of 500°C, 700°C and 900°C and characterized by X-ray Diffraction (XRD), Thermogravimetric Analysis (TG / DTG/ DTA), Infrared Spectroscopy (FTIR), Temperature Programmed Reduction (TPR) and Scanning Electron Microscopy (SEM). The perovskite phase was detected in all the X-rays patterns. In the infrared spectroscopy observed the oxide formation as the calcination temperature increases with the appearance of the band metal - oxygen. The images of SEM revealed uniform distribution for the PrCoO3 and particles agglomerated as consequence of particle size for PrNiO3. From the data of thermal analysis, the kinetics of decomposition of organic matter was employed using the kinetics methods called Model Free Kinetics and Flynn and Wall, in the heating ratios 10, 20 and 30° C.min-1 between room temperature and 700°C. Finally, been obtained the values of activation energy for the region of greatest decomposition of organic matter in samples that were determined by the degree of conversion (α)