904 resultados para Risk Reduction Engineering Laboratory (U.S.)
Resumo:
An aim of government and the international community is to respond to global processes and crises through a range of policy and practical approaches that help limit damage from shocks and stresses. Three approaches to vulnerability reduction that have become particularly prominent in recent years are social protection (SP), disaster risk reduction (DRR) and climate change adaptation (CCA). Although these approaches have much in common, they have developed separately over the last two decades. However, given the increasingly complex and interlinked array of risks that poor and vulnerable people face, it is likely that they will not be sufficient in the long run if they continue to be applied in isolation from one another. In recognition of this challenge, the concept of Adaptive Social Protection (ASP) has been developed. ASP refers to a series of measures which aims to build resilience of the poorest and most vulnerable people to climate change by combining elements of SP, DRR and CCA in programmes and projects. The aim of this paper is to provide an initial assessment of the ways in which these elements are being brought together in development policy and practice. It does this by conducting a meta-analysis of 124 agricultural programmes implemented in five countries in south Asia. These are Afghanistan, Bangladesh, India, Nepal and Pakistan. The findings show that full integration of SP, DRR and CCA is relatively limited in south Asia, although there has been significant progress in combining SP and DRR in the last ten years. Projects that combine elements of SP, DRR and CCA tend to emphasise broad poverty and vulnerability reduction goals relative to those that do not. Such approaches can provide valuable lessons and insights for the promotion of climate resilient livelihoods amongst policymakers and practitioners.
Resumo:
Cardiovascular diseases (CVD) are the leading cause of mortality and morbidity worldwide. One of the key dietary recommendations for CVD prevention is reduction of saturated fat intake. Yet despite milk and dairy foods contributing on average 27 % of saturated fat intake in the UK diet, evidence from prospective cohort studies does not support a detrimental effect of milk and dairy foods on risk of CVD. This paper provides a brief overview of the role of milk and dairy products in the diets of UK adults, and will summarise the evidence in relation to the effects of milk and dairy consumption on CVD risk factors and mortality. The majority of prospective studies and meta-analyses examining the relationship between milk and dairy product consumption and risk of CVD show that milk and dairy products, excluding butter, are not associated with detrimental effects on CVD mortality or risk biomarkers, that include serum LDL cholesterol. In addition, there is increasing evidence that milk and dairy products are associated with lower blood pressure and arterial stiffness. These apparent benefits of milk and dairy foods have been attributed to their unique nutritional composition, and suggest that the elimination of milk and dairy may not be the optimum strategy for CVD risk reduction.
Resumo:
Floods are the most frequent of natural disasters, affecting millions of people across the globe every year. The anticipation and forecasting of floods at the global scale is crucial to preparing for severe events and providing early awareness where local flood models and warning services may not exist. As numerical weather prediction models continue to improve, operational centres are increasingly using the meteorological output from these to drive hydrological models, creating hydrometeorological systems capable of forecasting river flow and flood events at much longer lead times than has previously been possible. Furthermore, developments in, for example, modelling capabilities, data and resources in recent years have made it possible to produce global scale flood forecasting systems. In this paper, the current state of operational large scale flood forecasting is discussed, including probabilistic forecasting of floods using ensemble prediction systems. Six state-of-the-art operational large scale flood forecasting systems are reviewed, describing similarities and differences in their approaches to forecasting floods at the global and continental scale. Currently, operational systems have the capability to produce coarse-scale discharge forecasts in the medium-range and disseminate forecasts and, in some cases, early warning products, in real time across the globe, in support of national forecasting capabilities. With improvements in seasonal weather forecasting, future advances may include more seamless hydrological forecasting at the global scale, alongside a move towards multi-model forecasts and grand ensemble techniques, responding to the requirement of developing multi-hazard early warning systems for disaster risk reduction.
Resumo:
A presente tese trata do tema redes de cooperação interorganizacionais no contexto brasileiro. O estudo aborda uma política pública governamental desenvolvida no Sul do Brasil voltada a ampliar a competitividade das pequenas empresas e gerar desenvolvimento econômico e social através do incentivo a formação de redes de cooperação entre empresas. O objetivo principal da tese é identificar e compreender os principais fatores que afetam a gestão de redes de cooperação. A partir de uma pesquisa quantitativa realizada em uma amostra de 443 empresas participantes de 120 redes, os resultados evidenciaram os principais elementos de gestão. O Programa Redes de Cooperação, desenvolvido pelo Governo do Estado do Rio Grande do Sul, trata-se de uma política pública que, desde o ano 2000, objetiva o fortalecimento competitivo de pequenas empresas e o desenvolvimento socioeconômico regional. Esse programa sustenta-se em três pilares de atuação: a) uma metodologia de formação, consolidação e expansão de redes entre empresas; b) uma estrutura regionalizada de suporte à implementação formada por uma rede de universidades regionais e c) uma coordenação central por parte do Governo do Estado, responsável pelos instrumentos de promoção, orientação e apoio aos empresários e gestores das redes. Cabe destacar que o caso estudado envolve 120 redes de cooperação, nas quais participam três mil empresas que, juntas, empregam 35.000 pessoas e faturam mais de US$ 1 bilhão. Além disso, a relação próxima com as universidades vem possibilitando uma interação acadêmica em nível nacional que tem gerado avanços teórico-práticos para o fortalecimento da cooperação interorganizacional. Com base nas referências teóricas e em evidências observadas por estudos exploratórios, realizados ex ante no campo de pesquisa, identificaram-se cinco atributos de gestão de redes – mecanismos sociais, aspectos contratuais, motivação e comprometimento, integração com flexibilidade e organização estratégica – e cinco benefícios – ganhos de escala e de poder de mercado, provisão de soluções, aprendizagem e inovação, redução de custos e riscos, e relações sociais. Para confirmação ou não dos dez fatores identificados ex ante e o seu grau de importância, realizou-se uma análise conjunta em uma amostra de 443 proprietários de empresas de uma população de 3.087 associados às 120 redes do programa. Os dados empíricos foram coletados pelo pesquisador em 2005, sendo agregados e processados através do programa estatístico SPSS versão 12.0. Os resultados obtidos pela análise conjunta confirmaram a importância dos dez fatores identificados. Nenhum dos fatores destacou-se significativamente em relação aos demais, o que indica que todos eles têm impacto semelhante na gestão das redes. No campo de estudos sobre redes interorganizacionais, as conclusões da pesquisa contribuíram para uma melhor compreensão dos fatores que influenciam em maior ou menor grau a gestão de redes de cooperação. Demonstraram empiricamente, no caso brasileiro, a coerência de postulados teóricos, desenvolvidos por pesquisas realizadas em outros contextos. No que tange às políticas públicas, os resultados evidenciaram que a promoção da cooperação em redes possibilita ganhos competitivos para as pequenas empresas. No âmbito organizacional, os fatores realçados poderão orientar os gestores nas suas decisões estratégicas no sentido de ampliar os ganhos competitivos da ação em rede.
Resumo:
The increase in the number of natural disasters, as well as their social and economic effects, in recent years, has raised a larger collection, by the media, population and control organs, in the members of the Civil Defense system on the reduction of their effects on society, given that the same has been increasingly overwhelming. To this end, the research analyzes the screen because of the Civil Defense system, historically, have focused their actions, programs and public policies on disaster management, i.e. in the response and recovery at the expense of disaster risk management, i.e. on prevention, preparedness and mitigation of the same, given that the same cannot be avoided, but its effects Yes decreased.This arrangement is studied from the literature review, interviews and field visits. Thus, it was found that the resposabilização ratio and Reduction of risk of disasters that the higher the enforcement and accountability greater and consistent are the number of actions, programmes and public policies aimed at prevention, preparedness and mitigation, i.e. for disaster risk reduction management.
Resumo:
In recent years, the biosafety has been made possible a new look which are based the conceptions of health and illness process, as well as human needs. This new vision is focused on health vigilance that is referenced specifically in this study to the worker s health. The health of workers is essential for the prevention and control of epidemics and outbreaks of diseases as well as emerging and reemerging diseases. The present study wants to show the importance of biosafety measures for health workers, showing them through the concepts in their daily work. It is also to direct the use of biosafety measures in the care of oncology and hematology patients care, because of its infection susceptibility. OBJECTIVES: To analyze the conceptions of health workers in the biosafety pratice to the patients in oncological and hematological treatment in an oncological institution in Natal / RN, as well as make a socio-demographic profile of these workers and to know their difficulties to adequate biosafety measures. METODOLOGIA: The research is exploratory descriptive with qualitative approach, using the technique of oral history. The use of this technique is justified for the possibility of analyze the conceptions of health workers in the face of biosafety measures. From the definition of analysis categories that have emerged in the study. The categories were: daily work, education, occupational risk and onco-hematological care. The research population was the health workers who provide care to patients in oncological and hematological treatment. The study was conducted in the League against Cancer, in Natal / RN, specifically in the unit Luiz Antonio Hospital. Data collections were conducted from June to August of 2011 and were interviewed sixteen employees who assist in oncology and hematology. Structured interviews were conducted in three shifts, given the prospects of expanding the possibilities of analysis of the biosafety concepts. After data collection, the interviews were analyzed qualitatively by the technique of oral history. This genre, thematic oral history is a modern resource used for preparation of documents, files and studies concerning the social experience of people and groups with the construction of a script prior to the interview moment (MEIHY, 2002). ANALYSIS OF INFORMATION: It was made a reflection about the concepts and practices of professionals who take care of patients in oncology and hematology as well as its relation to biosafety measures. The speech of employees revealed that the adoption has been very supportive of these standards, although some have been highlighted gaps in the understanding of employees in relation to biosafety and the proposed categories. CONCLUSION: The analysis of information showed that biosafety has been cited by employees as an immeasurable benefit to safety and occupational health. And the strengths marks in their understanding were: the excellence of care and safety in occupational diseases risk reduction and infections resulting from their work activities, despite some difficulties in adopting appropriate biosafety standards
Resumo:
In the present research work, composites were prepared using pine apple leaf fibres (PALF) as reinforcement with unsaturated polyester resin as matrix, incorporating with fire retardant at different compositions. The PALF was obtained from the decortication of pine apple leaves obtained from Ramada 4 from Ielmo Marinho in the State of Rio Grande do Norte. The unsaturated polyester resin and the catalyzer were bought from the local establishment. The fire retardant, aluminium tri-hydroxide - Al(OH)3 was donated by Alcoa Alumínio S.A and was used in the proportions of 20%, 40% and 60% w/w. Initially the fibres were treated with 2% NaOH for 1 hour, to remove any impurities present on the fibre surface, such as wax, fat, pectin and pectate, in order to have a better adsorption of the fibres with the matrix as well as the flame retardant. The fibre mat was prepared in a mat preparator by immersion, developed in the Textile Engineering Laboratory, at the UFRN. The composites (300x300x3 mm) were prepared by compression molding and the samples (150x25x3 mm) for analysis of the properties were cut randomly using a laser cutter. Some of the cut samples were used to measure the smoke emission and fire resistance using UL94 standard. Mechanical tension-extension and flexural properties were carried in CTGás RN and the Laboratório de Metais e Ensaios Mecânicos Engenharia de Materiais UFRN , as well as SEM studies were carried out at Núcleo de Estudos em Petróleo e Gás Natural - UFRN . From the observed results, it was noted that, there was no marked influence of the fire retardant on the mechanical properties. Also in the water absorption test, the quantity of water absorbed was less in the sample with higher concentration of fire retardant. It was also observed that the increase in the proportion of the fire retardant increased the time of burning, may be due to the compactness of the composite due to the presence of fire retardant as a filling material even though it was meant to reduce the rate of inflammability of the composite
Resumo:
In 1998 the first decorticator was developed in the Textile Engineering Laboratory and patented for the purpose of extracting fibres from pineapple leaves, with the financial help from CNPq and BNB. The objective of the present work was to develop an automatic decorticator different from the first one with a semiautomatic system of decortication with automatic feeding of the leaves and collection of the extracted fibres. The system is started through a command system that passes information to two engines, one for starting the beater cylinder and the other for the feeding of the leaves as well as the extraction of the decorticated fibres automatically. This in turn introduces the leaves between a knife and a beater cylinder with twenty blades (the previous one had only 8 blades). These blades are supported by equidistant flanges with a central transmission axis that would help in increasing the number of beatings of the leaves. In the present system the operator has to place the leaves on the rotating endless feeding belt and collect the extracted leaves that are being carried out through another endless belt. The pulp resulted form the extraction is collected in a tray through a collector. The feeding of the leaves as well as the extraction of the fibres is controlled automatically by varying the velocity of the cylinders. The semi-automatic decorticator basically composed of a chassis made out of iron bars (profile L) with 200cm length, 91 cm of height 68 cm of width. The decorticator weighs around 300Kg. It was observed that the increase in the number of blades from 8 to twenty in the beater cylinder reduced the turbulence inside the decorticator, which helped to improve the removal of the fibres without any problems as well as the quality of the fibres. From the studies carried out, from each leaf 2,8 to 4,5% of fibres can be extracted. This gives around 4 to 5 tons of fibres per hectare, which is more than that of cotton production per hectare. This quantity with no doubt could generate jobs to the people not only on the production of the fibres but also on their application in different areas
Resumo:
In the present work, three composites with distinct reinforcements (polyester, modal e polyester + modal), all if a unsaturated orthophthalic polyester resin as matrix were used, in order to conduct a comparative study by mechanical tests and water absorption. The fibre mats were prepared in a mat preparatory by immersion developed in the Textile Engineering Laboratory. The composites were manufactured using a closed mould process by compression using an unsaturated orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as an initiator. In each composite twelve samples with the dimensions of 150x25x3 mm were cut randomly for the mechanical analysis (tension x extension, three points bending and water absorption and Scanning Electron Micsroscopy). The mechanical tests were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN . All the analyses were carried out according to the ASTM norms. The resultant samples from the mechanical analysis were subjected for the Scanning Electron Microscopy analysis. Based on the results obtained, it was observed that the reinforced composite with two fibres (modal + polyester) presented better results in comparison to the other two composites both in the tension/extension as well on the three point bending tests. In the water absorption test, it was possible to observe an equilibrium in the water absorption by the modal and polyester composite, due to the union of the two fibres. In the SEM images, the regions of rupture in the composites as well as the adsorption between the fiber and the matrix could be observed
Resumo:
The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. The fibers were characterized and made matting (non-woven). The phases of the project were consisted to develop methods and to convert these fibers (booster) blended with polyester resin (matrix) in different proportions (10%, 20% and 30%) at the composite. Were studied fiber characteristics, mechanical properties of the composites, water absorption and scanning electron microscopy. Initially, the fibers were treated with solution of sodium hydroxide of 0.05 mols, and then taken to matting preparing at the textile engineering laboratory - UFRN. The composites were made by compression molding, using an orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as initiator (catalyst). To evaluate the mechanical tests (tensile and flexural) and water absorption were made twelve specimens with dimensions 150x25x3 mm were cut randomly. According to the standard method, tensile tests (ASTM 3039) bending tests (ASTM D790) were performed at the mechanical testing of metals at laboratory UFRN. The results of these tests showed that the composite reinforced with 30% had a better behavior when exposed to tension charge; while on the three points bending test showed that the composite reinforced with 10% had a better behavior. In the water absorption test it was possible to see that the highest absorption happened on the composite reinforced with 30%. In the micrographs, it was possible to see the regions of rupture and behavior of the composite (booster / matrix)
Resumo:
O município de Itapecerica da Serra, Região Metropolitana de São Paulo (RMSP), possui uma população de 162 mil habitantes e cerca de 150 km² de área. As características geológicas e geomorfológicas do seu território e o fato de localizar-se quase inteiramente em área de proteção aos mananciais que abastecem a RMSP implicam restrições ao uso do solo e à expansão da ocupação nos moldes em que vem ocorrendo. O diagnóstico das áreas de risco geológico do município foi uma das atividades implementadas para a execução do Plano Municipal de Redução de Riscos (PMRR) do município. O PMRR tem por objetivo apresentar os resultados da identificação e da análise das situações de risco geológico-geotécnico, criando propostas de intervenções estruturais para a sua eliminação e/ou redução, estimativas de custo e estratégias para a gestão de risco no município. O mapeamento do risco geológico foi realizado em 35 áreas, onde foram identificados 66 setores de risco englobando, 419 moradias, sendo 175 moradias em setores cujo grau de risco foi classificado como alto ou muito alto. As propostas de intervenção estrutural buscaram a aderência entre o processo geodinâmico atuante e a tipologia de intervenção sugerida para estabilização e controle. A definição de critérios para a hierarquização das intervenções propostas contribuiu para a inserção das propostas do PMRR no planejamento plurianual do município de Itapecerica da Serra.
Resumo:
Context - Correction of voluminous hernias and large abdominal wall defects is a big challenge in surgical practice due to technical difficulties and the high incidence of respiratory and cardiovascular complications. Objectives - To present the authors experience with inducing progressive pneumoperitoneum preoperative to surgical treatment of voluminous hernias of the abdominal wall. Methods - Retrospective study of six patients who presented voluminous hernias of the abdominal wall and were operated after installation of a pneumoperitoneum. The procedure was performed by placing a catheter in the abdominal cavity at the level of the left hypochondrium with ambient air insufflation for 10 to 15 days. Results - Four of the six patients were female and two male. Ages ranged from 42 to 62 years. Hernia duration varied from 5 to 40 years. Four patients had incisional, one umbilical, and one inguinal hernias. Mean pneumoperitoneum time was 11.6 days. There were no complications related to pneumoperitoneum installation and maintenance. All hernias were corrected without technical difficulties. The Lichtenstein technique was used to correct the inguinal hernia, peritoneal aponeurotic transposition for one of the incisional hernias, with the rest corrected using polypropylene mesh. One death and one wall infection were observed post operatively. No recurrences were reported until now, in 4 to 36 months of follow-up. Conclusion - Preoperative progressive pneumoperitoneum is a safe and easy executed procedure, which simplifies surgery and reduces post-operative respiratory and cardiovascular complications. It is indicated for patients with hernias that have lost the right of domain in the abdominal cavity.
Resumo:
The importance of thrombosis and anticoagulation in clinical practice is rooted firmly in several fundamental constructs that can be applied both broadly and globally. Awareness and the appropriate use of anticoagulant therapy remain the keys to prevention and treatment. However, to assure maximal efficacy and safety, the clinician must, according to the available evidence, choose the right drug, at the right dose, for the right patient, under the right indication, and for the right duration of time. The first International Symposium of Thrombosis and Anticoagulation in Internal Medicine was a scientific program developed by clinicians for clinicians. The primary objective of the meeting was to educate, motivate and inspire internists, cardiologists and hematologists by convening national and international visionaries, thought-leaders and dedicated clinician-scientists in Sao Paulo, Brazil. This article is a focused summary of the symposium proceedings. © Springer Science+Business Media, LLC 2009.
Resumo:
Recurrent venous thromboembolism is a significant problem leading to increased morbidity and mortality. It has a high impact on patients' quality of life and imposes a great financial burden on society. Cumulative recurrence has been reported as 40% at 10 years, while the chance of developing postthrombotic signs and symptoms in the lower extremities almost quadruples when ipsilateral. There is also a higher chance of developing pulmonary hypertension. Important factors for recurrence are unprovoked episodes of deep vein thrombosis, malignancy and older age. The evidence for other factors is controversial. Accurate diagnosis and treatment tailored to the patients' history, thrombotic events and risk factors are necessary to optimize management and prevent recurrence.
Resumo:
Incluye Bibliografía