Exploring the potentialities of a new type of CFRP laminate for the simultaneous flexural and shear strengthening of RC beams: numerical research

This study aims to develop an innovative carbon fibre reinforced polymer (CFRP) laminate with a U configuration to address strengthening interventions, where the increment of both flexural and shear capacity of reinforced concrete (RC) elements is required. This strengthening solution combines the near surface mounted (NSM) and embedded through section (ETS) techniques in the same application, since these techniques have already evidenced high performance on flexural and shear strengthening of RC beams using FRP systems, respectively. In fact, the proposed hybrid technique aims to mobilize the advantages provided by these two strengthening techniques by using an innovative CFRP laminate. The strengthening efficacy of this new hybrid NSM/ETS technique was numerically assessed and compared to the corresponding efficiency of NSM and ETS techniques applied separately for the flexural and shear strengthening of RC beams, respectively. The numerical models are described and the main relevant results are presented and discussed.

Application of near surface mounted (NSM) strengthening technique to traditional timber frame walls

Timber frame buildings are well known as an efficient seismic resistant structure popular all over the world not only due to their seismic performance, but also to their low cost and the strength they offer. These constructions still exist today and it is important to be able to preserve them, so a better knowledge on their behaviour is sought. Furthermore, historic technologies could be used even in modern constructions to build seismic resistant buildings using more natural materials with lesser costs. A great rehabilitation effort is being carried out on this type of buildings, as their neglect has led to decay or their change in use and alterations to the structure has led to the need to retrofit such buildings; only recently studies on their behaviour have become available and only a few of them address the issue of possible strengthening techniques for this kind of walls. In this scope, an innovative retrofitting technique (near surface mounted steel flat bars) is proposed and validated on traditional timber frame walls based on an extensive experimental program. The results of the static cyclic tests on distinct wall typologies retrofitted with the NSM technique are herein presented and discussed in detail. The main features on deformation, lateral stiffness, lateral resistance and seismic performance indexes are analysed

Rockburst laboratory tests database - Application of data mining techniques

Rockburst is characterized by a violent explosion of a block causing a sudden rupture in the rock and is quite common in deep tunnels. It is critical to understand the phenomenon of rockburst, focusing on the patterns of occurrence so these events can be avoided and/or managed saving costs and possibly lives. The failure mechanism of rockburst needs to be better understood. Laboratory experiments are undergoing at the Laboratory for Geomechanics and Deep Underground Engineering (SKLGDUE) of Beijing and the system is described. A large number of rockburst tests were performed and their information collected, stored in a database and analyzed. Data Mining (DM) techniques were applied to the database in order to develop predictive models for the rockburst maximum stress (σRB) and rockburst risk index (IRB) that need the results of such tests to be determined. With the developed models it is possible to predict these parameters with high accuracy levels using data from the rock mass and specific project.

Assessing the application of polypropylene multifilament yarns in brain phantoms

The currently available clinical imaging methods do not provide highly detailed information about location and severity of axonal injury or the expected recovery time of patients with traumatic brain injury [1]. High-Definition Fiber Tractography (HDFT) is a novel imaging modality that allows visualizing and quantifying, directly, the degree of axons damage, predicting functional deficits due to traumatic axonal injury and loss of cortical projections. This imaging modality is based on diffusion technology [2]. The inexistence of a phantom able to mimic properly the human brain hinders the possibility of testing, calibrating and validating these medical imaging techniques. Most research done in this area fails in key points, such as the size limit reproduced of the brain fibers and the quick and easy reproducibility of phantoms [3]. For that reason, it is necessary to develop similar structures matching the micron scale of axon tubes. Flexible textiles can play an important role since they allow producing controlled packing densities and crossing structures that match closely the human crossing patterns of the brain. To build a brain phantom, several parameters must be taken into account in what concerns to the materials selection, like hydrophobicity, density and fiber diameter, since these factors influence directly the values of fractional anisotropy. Fiber cross-section shape is other important parameter. Earlier studies showed that synthetic fibrous materials are a good choice for building a brain phantom [4]. The present work is integrated in a broader project that aims to develop a brain phantom made by fibrous materials to validate and calibrate HDFT. Due to the similarity between thousands of hollow multifilaments in a fibrous arrangement, like a yarn, and the axons, low twist polypropylene multifilament yarns were selected for this development. In this sense, extruded hollow filaments were analysed in scanning electron microscope to characterize their main dimensions and shape. In order to approximate the dimensional scale to human axons, five types of polypropylene yarns with different linear density (denier) were used, aiming to understand the effect of linear density on the filament inner and outer areas. Moreover, in order to achieve the required dimensions, the polypropylene filaments cross-section was diminished in a drawing stage of a filament extrusion line. Subsequently, tensile tests were performed to characterize the mechanical behaviour of hollow filaments and to evaluate the differences between stretched and non-stretched filaments. In general, an increase of the linear density causes the increase in the size of the filament cross section. With the increase of structure orientation of filaments, induced by stretching, breaking tenacity increases and elongation at break decreases. The production of hollow fibers, with the required characteristics, is one of the key steps to create a brain phantom that properly mimics the human brain that may be used for the validation and calibration of HDFT, an imaging approach that is expected to contribute significantly to the areas of brain related research.

Espectroscopía de emisión de rayos x. Aplicación a la caracterización de materiales. X-ray emission spectroscopy. Application to materials characterization

La idea principal del proyecto abarca el estudio de parámetros y fenómenos físicos. Los avances logrados se aplicarán al desarrollo de software y metodologías para cuantificación de materiales mediante microanálisis con sonda de electrones y microscopía electrónica de barrido. El microanálisis no es una técnica absoluta, sino que requiere de estándares de referencia, para obviar el uso de ciertos parámetros geométricos y atómicos difíciles de conocer con una precisión adecuada. Para contar con un método sin estándares debe abordarse la determinación de parámetros atómicos e instrumentales, que es uno de los aspectos que se desea encarar en este proyecto. Por otro lado, también se pretende incluir los parámetros estudiados en un software de cuantificación desarrollado por integrantes del proyecto. Otro de los propósitos del plan de trabajo es estudiar la potencialidad de la resolución espacial de una microsonda de electrones con el fin de desarrollar una metodología para caracterizar interfases, bordes de granos e inclusiones, con resolución submicrométrica, ya que los métodos tradicionales de cuantificación se restringen al caso de muestras planas y homogéneas dentro del volumen de interacción, pero la caracterización de inhomogeneidades a nivel micrométrico no ha sido desarrollada todavía, salvo algunas excepciones. The main idea of this project involves the study of physical parameters and phenomena. The concretion of the different goals will permit the elaboration of softeare and methodologies for materials characterization by means of electron probe microanalysis and scanning microscopy. Electron probe microanalysis is not an absolute technique, but requires reference standards in order not to involve certain geometrical and atomic parameters for which high uncertainties cannot be avoided. In order to have standardless method, the determination of atomic and instrumental parameters must be accomplished, as will be faced through this project. Complementary, the parameters studied will be included in a quantification software developed in our research group of FaMAF. Another objective of this activity plan is to study the spatial resolution potentiality of a focalized electron beam, with the aim of characterizing interphases, grain boundaries and inclusions with submicron sensitivity, since the traditional quantification procedures are restricted to flat homogeneous samples, whereas the characterization of inhomogeneities has not been developed yet.

An investigation into system security requirements and implementation in an Application Service Provider (ASP) environment

Although the ASP model has been around for over a decade, it has not achieved the expected high level of market uptake. This research project examines the past and present state of ASP adoption and identifies security as a primary factor influencing the uptake of the model. The early chapters of this document examine the ASP model and ASP security in particular. Specifically, the literature and technology review chapter analyses ASP literature, security technologies and best practices with respect to system security in general. Based on this investigation, a prototype to illustrate the range and types of technologies that encompass a security framework was developed and is described in detail. The latter chapters of this document evaluate the practical implementation of system security in an ASP environment. Finally, this document outlines the research outputs, including the conclusions drawn and recommendations with respect to system security in an ASP environment. The primary research output is the recommendation that by following best practices with respect to security, an ASP application can provide the same level of security one would expect from any other n-tier client-server application. In addition, a security evaluation matrix, which could be used to evaluate not only the security of ASP applications but the security of any n-tier application, was developed by the author. This thesis shows that perceptions with regard to fears of inadequate security of ASP solutions and solution data are misguided. Finally, based on the research conducted, the author recommends that ASP solutions should be developed and deployed on tried, tested and trusted infrastructure. Existing Application Programming Interfaces (APIs) should be used where possible and security best practices should be adhered to where feasible.

Application of multivariate statistical process control to fuel cell manufacturing

Univariate statistical control charts, such as the Shewhart chart, do not satisfy the requirements for process monitoring on a high volume automated fuel cell manufacturing line. This is because of the number of variables that require monitoring. The risk of elevated false alarms, due to the nature of the process being high volume, can present problems if univariate methods are used. Multivariate statistical methods are discussed as an alternative for process monitoring and control. The research presented is conducted on a manufacturing line which evaluates the performance of a fuel cell. It has three stages of production assembly that contribute to the final end product performance. The product performance is assessed by power and energy measurements, taken at various time points throughout the discharge testing of the fuel cell. The literature review performed on these multivariate techniques are evaluated using individual and batch observations. Modern techniques using multivariate control charts on Hotellings T2 are compared to other multivariate methods, such as Principal Components Analysis (PCA). The latter, PCA, was identified as the most suitable method. Control charts such as, scores, T2 and DModX charts, are constructed from the PCA model. Diagnostic procedures, using Contribution plots, for out of control points that are detected using these control charts, are also discussed. These plots enable the investigator to perform root cause analysis. Multivariate batch techniques are compared to individual observations typically seen on continuous processes. Recommendations, for the introduction of multivariate techniques that would be appropriate for most high volume processes, are also covered.

The Research of Increase of Channel Efficiency for IP Traffic Transmission over Digital Power Line Carrier Channels

This article is devoted to the research of channel efficiency for IP-traffic transmission over Digital Power Line Carrier channels. The application of serial WAN connections and header compression as methods to increase channel efficiency is considered. According to the results of the research an effective solution for network traffic transmission in DPLC networks was proposed.

Application of chemicals on Ficus carica L. transplanted

This research deals with the effects of chemicals on, transplantation of Ficus carica L. cv. Roxo de Valinhos. Fig plants were sprayed with Transplantone (naphthaleneacetamide plusnaphtaleneacetic acid) 10 g/1 , Oed green (oxyethylene docosanol) 40 ml/1, Good-rite peps (polyethylene polysulfite) 0,6 ml/1, and Mobileaf 200 ml/1. A check treatment and aereduction to half of leaf area were also established. Reduction of leaf area and application of oxyethylene docosanol promoted higher plant survival. The chemicals did not affect the growth of transplanted plants. Auxins constituents of Transplantone increased leaf number of fig plants.

A Methodology to measure shareholder value orientation and shareholder value creation aimed at providing a research basis to investigate the link between both magnitudes

Does shareholder value orientation lead to shareholder value creation? This article proposes methods to quantify both, shareholder value orientation and shareholder value creation. Through the application of these models it is possible to quantify both dimensions and examine statistically in how far shareholder value orientation explains shareholder value creation. The scoring model developed in this paper allows quantifying the orientation of managers towards the objective to maximize wealth of shareholders. The method evaluates information that comes from the companies and scores the value orientation in a scale from 0 to 10 points. Analytically the variable value orientation is operationalized expressing it as the general attitude of managers toward the objective of value creation, investment policy and behavior, flexibility and further eight value drivers. The value creation model works with market data such as stock prices and dividend payments. Both methods where applied to a sample of 38 blue chip companies: 32 firms belonged to the share index IBEX 35 on July 1st, 1999, one company represents the “new economy” listed in the Spanish New Market as per July 1st, 2001, and 5 European multinational groups formed part of the EuroStoxx 50 index also on July 1st, 2001. The research period comprised the financial years 1998, 1999, and 2000. A regression analysis showed that between 15.9% and 23.4% of shareholder value creation can be explained by shareholder value orientation.

Research policy and endogenous growth

This paper studies the effects of different types of research policy on economic growth. We find that while tax incentives to private research, public funding of private projects, and basic research performed at public institutions have unambiguously positive effects on economic growth, performing applied research at public institutions could have negative growth effects. This is due to the large crowding out of private research caused by public R\&D when it competes with private firms in the "patent race". Concerning the effects of these policies on welfare, it is found that research policy can either improve or reduce consumer welfare depending on the characteristics of the policy and that an excessively high research subsidy will reduce it.

Research work in Tokyo Institute of Technology

Research carried out in Tokyo Institute of Technology. The objective is to determine the influence of Interfacial Transition Zone (ITZ) around Lightweight aggregate in concrete on Chloride ion diffusivity. The ITZ of conventional concretes is the weakest point of concrete. The accumulating water on ITZ zone forms the most permeable area inside the concrete. Hence ITZ paves the way for chloride ion diffusion. The quality of ITZ depends on type and quality of aggregates used, water-cement ratio and also the method used for the production of concrete. It has been used two types of lightweight aggregates will be used, Chinese and Japanese, with different absorption capacities. The idea is to produce concrete with same effective water - cement ratio, using the same aggregates in two different conditions, dry and saturated, and compare the chloride ion diffusivity in these concretes (by diffusion test). A comparison of ITZ thickness of these concretes by SEM and EDAX-maps is also proposed. The chloride ion diffusion of concretes produced with the same effective water – cement ratio and same aggregates (dry and ssd) will depend, mainly, on ITZ.

Financial incentives in academia: research versus development

This paper investigates the effects of monetary rewards on the pattern of research. We build a simple repeated model of a researcher capable to obtain innovative ideas. We analyse how the legal environment affects the allocation of researcher's time between research and development. Although technology transfer objectives reduce the time spent in research, they might also induce researchers to conduct research that is more basic in nature, contrary to what the skewing problem would presage. We also show that our results hold even if development delays publication.

Incentives for interdisciplinary research

This paper is a positive analysis of the driving forces in interdisciplinary research. I take the perspective of a research institution that has to decide how to apply its resources among the production of two types of knowledge: specialized or interdisciplinary. Using a prize mechanism of compensation, I show that the choice of interdisciplinarity is compatible with profit maximization when the requirement for the production is sufficiently demanding, and when the new interdisciplinary field is not too neutral. Productive gains due to complementarities of efforts is the main advantage of interdisciplinary organization.

Business-science research collaboration under moral hazard

I analyze, in the context of business and science research collaboration, how the characteristics of partnership agreements are the result of an optimal contract between partners. The final outcome depends on the structure governing the partnership, and on the informational problems towards the efforts involved. The positive effect that the effort of each party has on the success of the other party, makes collaboration a preferred solution. Divergence in research goals may, however, create conflicts between partners. This paper shows how two different structures of partnership governance (a centralized, and a decentralized ones) may optimally use the type of project to motivate the supply of non-contractible efforts. Decentralized structure, however, always choose a project closer to its own preferences. Incentives may also come from monetary transfers, either from partners sharing each other benefits, or from public funds. I derive conditions under which public interventio