Seasonal variations in growth and clearance rate of the Zhikong scallop Chlamys farreri suspended in the deep water of Haizhou Bay, China

The growth and survival of the Zhikong scallop Chlamys farreri suspended in deep water of Haizhou Bay were studied from July 2007 to June 2008, and the biodeposition method was used to estimate the clearance rate of C. farreri under field conditions. Results showed that the scallop grew fast during all the culture time, with the exception of summer. The condition index of the scallop increased with time and reached the highest value in spring of the second year. The survival of scallops was 60.8 +/- A 3.9% at the end of this study, mortality occurring mainly during the summer and autumn of the first year. The clearance rate fluctuated obviously with season,with the highest value in September 2007, and the lowest value in March 2008. Factors accounting for variations in growth and clearance rate of scallops are also discussed.

Studies on two coordination polymers [M(mu(4)-pz25dc)](n) (M = Cd or Zn, pz25dc=pyrazine-2,5-dicarboxylato) with three-dimensional pillared-layer three-nodal framework: Synthesis, structural characterization, strong optical non-linearities and optical limiting properties

Two isomorphous new candidates [M(mu(4)-pz25dc)](n) (M = Cd, 1; Zn, 2; pz25dc = pyrazine-2,5-dicarboxylato)for nonlinear optical (NLO) materials have been synthesized hydrothermally and characterized crystallographically as pillared-layer three-nodal frameworks with one four-connected metal nodes and two crystallographically different four-connected ligand nodes. Their optical non-linearities are measured by the Z-Scan technique with an 8 ns pulsed laser at 532 nm. These two coordination polymers both exhibit strong NLO absorptive abilities [alpha(2) = (63 +/- 6) x 10 (12) mW (1) 1, ( 46 +/- 6) x 10 (11) mW (1) 2] and effective self-focusing performance [n(2) = (67 +/- 5) x 10 (18) 1, (13 +/- 3) x 10 (18) m(2) W (1) 2] in 1.02 x 10 (4) 1 and 1.05 x 10 (4) mol dm (3) 2 DMF solution separately. The values of the limiting threshold are also measured from the optical limiting experimental data. The heavy atom effect plays important role in the enhancement of optical non-linearities and optical limiting properties. (C) 2009 Elsevier B. V. All rights reserved.

Formation of nano-crystalline corrosion products on Zn-Al alloy coating exposed to seawater

Hot dip Zn-Al alloy coating performs better than hot dip galvanized coating and 55% Al-Zn-Si coating as well with regard to general seawater corrosion protection. A characterization of the corrosion products on Zn-Al alloy coating immersed in dynamic aerated seawater has been performed mainly based on transmission electron microscopy (TEM) for morphological analysis and X-ray diffraction (XRD) technique for crystalline phase identification. The XRD and TEM analyses showed that the corrosion products mainly were typical nanometer Zn4CO3(OH)(6).H2O, Zn-5(OH)(8)Cl-2 and Zn6Al2CO3(OH)(16). 4H(2)O microcrystals. This probably is connected to the co-precipitation of Zn2+ and Al3+ ions caused by adsorption. Zn-Al alloy coating being suffered seawater attacks, AI(OH)(3) gel was first produced on the coating surface. Zn and Al hydroxides would co-precipitate and form double-hydroxide when the concentration of adsorbed Zn2+ ions by the newly produced gel exceeded the critical degree of supersaturation of the interphase nucleation. However, because the growth of the crystals was too low to keep in step with the nucleation, a layer of nano-crystalline corrosion products were produced on the surface of the coating finally. (C) 2001 Elsevier Science Ltd. All rights reserved.

Study on growth factors of intermetallic layer within hot-dipped 25% Al-Zn alloy coating on steel

25%Al-Zn alloy coating performs better than hot dip galvanized coating and 55%Al-Zn-Si coating with regard to general seawater corrosion protection. This study deals with the interfacial intermetallic layer's growth, which affects considerably the corrosion resistance and mechanical properties of 25%Al-Zn alloy coatings, by means of three-factor quadratic regressive orthogonal experiments, The regression equation shows that the intermetallic layer thickness decreases rapidly with increasing content of Si added to the Zn-Al alloy bath, increases with rise in bath temperature and prolonging dip time. The most effective factor that determined the thickness of intermetallic layer was the amount of Si added to Zn-Al alloy bath, while the effect of bath temperature and dip time on the thickness of intermetallic layer were not very obvious.

Nicotinic acid as a nontoxic corrosion inhibitor for hot dipped Zn and Zn-Al alloy coatings on steels in diluted hydrochloric acid

The inhibition effect of nicotinic acid for corrosion of hot dipped Zn and Zn-Al alloy coatings in diluted hydrochloric acid was investigated using quantum chemistry analysis, weight loss test, electrochemical measurement, and scanning electronic microscope (SEM) analysis. Quantum chemistry calculation results showed that nicotinic acid possessed planar structure with a number of active centers, and the populations of the Mulliken charge, the highest occupied molecular orbital (HOMO), and the lowest unoccupied molecular orbital (LUMO) were found mainly focused around oxygen and nitrogen atoms, and the cyclic of the benzene as well. The results of weight loss test and electrochemical measurement indicated that inhibition efficiency (IE%) increased with inhibitor concentration, and the highest inhibition efficiency was up to 96.7%. The corrosion inhibition of these coatings was discussed in terms of blocking the electrode reaction by adsorption of the molecules at the active centers on the electrode surface. It was found that the adsorption of nicotinic acid on coating surface followed Langmuir adsorption isotherm with single molecular layer, and nicotinic acid adsorbed on the coating surface probably by chemisorption. Nicotinic acid, therefore, can act as a good nontoxic corrosion inhibitor for hot dipped Zn and Zn-Al alloy coatings in diluted hydrochloric acid solution. (c) 2007 Elsevier Ltd. All rights reserved.

内蒙古龙头山Ag-Pb-Zn多金属矿床成矿模式及找矿模型

The recent years research indicated that middle-south section of Da Hinggan Mountains metallogenic belt has two periods(Hercynian and Yanshanian) characteristics of metallogenesis, as well as the most of ore deposits in the area closely relate to Permian strata. Longtoushan ore deposit discovered in 2004 is an Ag-Pb-Zn polymetallic ore deposit born in Permian and located in the east hillside of the metallogenic belt, which has considerable resources potentials. It has important research value for its good metallogenic location and blank research history. Base on the detail field geology studies, the geology characteristics of "two stages and three kinds of metallogensis" has established. According to further work through geochemistry research including trace element, REE, S, Pb and Sr isotope, as well as petrography, microtemperature measurement, Laser Raman analysis and thermodynamics calculation of fluid inclusion, origin and characteristic of the ore-forming material and fluid has been discussed. And a new technology of single pellet Rb-Sr isochrones has been tried for dating its born time. Bae on above work, study of ore deposit comparison has been carried out, and metallogesis controlling factor and geological prospecting symbol have been summarized. Finally, metallogenic model and prospecting model have been established. According to above, the next step work direction has been proposed. Main achievement of the paper are listed as follow: 1.Longtoushan ore deposit has experienced two metallogenic periods including hot-water sedimentation period and hydrothermal reformation period. There are three kinds of metallizing phase: bedded(or near-bedded) phase, vein-shaped phase and pipe-shaped phase. The mian metallogenic period is hot-water sedimentation period. 2.Ore deposit geochemistry research indicated that the metal sulfides have charcateristic of hot-water sedimentation metallogensis, but generally suffered later hydrothermal transformation. The barite mineral isotope content is homogenous, showing the seabed hot-water sedimentation origin characteristic. Wall rock, such as tuff is one of metallogenic material origins. Both of Pb model age and Rb-Sr isochrone research older age value than that of strata, possibly for been influenced by hydrothermal transformation, and interfusion of ancient basis material. 3.There are two kinds of main metallogenic fluid inclusion in barite of the Longtoushan ore deposit, which are rich gas phase( C type) and liquid phase (D type). Their size is 2～7um, and principal components is H2O. Both kinds of fluid inclusion have freezing point temperature -7.1～-2.4℃ and -5.5～-0.3℃, salinity 4.0～10.6wt% and 0.5～8.5wt%, homogeneous temperature 176.8～361.6℃ and 101.4～279.9℃, which peak value around 270℃ and 170℃, respectively. Density of the ore-forming fluid is 0.73～0.97g/cm3, and metallogenic pressure is 62.3×105～377.9×105Pa. Above characteristic of the fluid inclusion are well geared to that of ore deposit originated in seabed hot-water sedimentation. 4.Through the comparison research, that Longtoushan ore deposit has main characteristic of hot-water sedimentation ore deposit has been indicated. Ore-forming control factor and prospecting symbol of it has been summarized, as well as metallogenic model and prospecting model. Next step work direction about prospecting has also been proposed finally.

硫酸盐还原菌混合菌群胞外聚合物对Zn^2＋的吸附和机理

硫酸盐还原菌（SRB）混合菌群分泌的胞外聚合物（EPS）能有效地吸附水溶液中的Zn^2＋在初始p（Zn^2＋）为500mg/L时，EPS对Zn^2＋的吸附量达到326．07mg/g，g。Freundlich方程能相对较好地拟合实验所得吸附数据。SRB混合菌群分泌的EPS的IR分析表明，EPS吸附Zn^2＋起主要作用的官能团是多聚糖C-O-C，羧基和脂类官能团，而蛋白质和多聚糖的-OH对Zn^2＋的结合能力有限.

简化连续提取法评价污染土壤中Zn、Cd的植物有效性

以0．01mol·L^-1 CaCl2和0．005mol·L^-1 1DTPA作为提取剂，用简化的3步连续提取法对贵州省赫章县土法炼锌污染土壤中Zn、Cd的形态进行了分析．结果显示，污染土壤中Zn、Cd主要以残渣态的形式存在，CaCl2提取态和DTPA提取态Zn、CA平均仅占全量的0．63%、3．91％和lO．94％、10．13％．土壤中不同形态Zn、Cd含量与玉米中Zn、CA含量的相关分析结果显示，CaCl2提取态金属与玉米中金属含量投有显著的相关关系，而DTPA提取态、残渣态以及总量Zn、Cd与玉米根、茎叶中Zn、Cd含量显著正相关．这些结果表明CaCl2提取态Zn、Cd对土壤中该元素的植物有效态可能不具重要贡献，而DTPA提取态金属和金属总量在一定程度上能作为评价土壤中元素植物有效性的标准．

红枫湖生物地球化学过程中Zn的赋存形态及季节性变化特征

通过对贵阳市红枫湖中溶解态锌、颗粒态锌及颗粒态锌中不同结合形态的研究，探讨了红枫湖生物地球化学过程中锌的主要赋存形态与季节性变化规律。结果发现，红枫湖总锌的质量浓度为0．72ug·L^-1～13．04ug·L^-1，污染较轻。红枫湖南湖总锌全年均高于北湖，主要是位于南部的羊昌河输入所致。红枫湖水体中锌的主要赋存形式是溶解态锌（占总锌的70％1；颗粒态中AEC（吸附态-可交换态-碳酸盐结合态）结合态锌是最主要的赋存形式（占颗粒态锌的72％）。溶解态锌含量夏季低而冬季高，主要是因为夏季生物吸收与吸附、以及冬季沉积物孔隙水向上覆水体的释放。颗粒物中有机结合态锌的变化主要受湖泊藻类繁殖的影响

炼锌固体废渣中重金属（Pb、Zn）的存在状态及环境影响

利用XRD、TEM／EDS和连续提取实验研究了土法炼锌固体废渣中重金属的矿物学特征及不同粒度中重金属的相态分布特征。与通常发现的重金属一般富集在小粒径废渣中的情况不同，本工作所研究的废渣样品中大粒径废渣与细粒径废渣相似，甚至有更高的金属含量。化学形态研究表明，冶炼过程形成的矿物（或玻璃质）集合体和堆积后的风化过程形成的次生矿物是废渣中重金属存在的主要化学相。同时发现Pb的殖渣态很少（0.39%-15.75%)，而Zn的残渣态较高（14.3%-46.2%)，这可能与冶炼工艺所形成较多Zn的硅酸盐矿物有关。尽管可交换态Pb、Zn在不同相态中的相对比例非常小（Pb 0.03%-1.30%;Zn 0.03%-3.30%)，但其绝对含量却比一般土壤或沉积物要高(Pb1.5-385μg/g;Zn3-590μg/g)。由于重金属可交换态有比其他化学相态更高的活动性和生物可利用性，因此，对环境有较大的潜在影响。废渣样品的微束分析表明，Pb在废渣中见有金属Pb存在形式或呈纳米金属Pb颗粒包裹于其他矿物或铁合金及熔球集合体中。同时不排除有Pb的碳酸盐矿物存在的可能。而以硅锌矿Zn2(SiO4)、锰硅锌矿（Zn,Mn)2[SiO4]和纤维状的丝锌铝石Zn8Al4[(OH)8(SiO4)5]·7H2O等矿物形式存在以及Fe、Mn等的铝硅酸盐形式存在的Zn，可能是导致Zn的残渣态较高的原因。与连续提取法的实验结果有较好的一致性。

炼锌废渣中重金属Pb、Zn的矿物学特征

利用X射线衍射（XRD）和带能谱的电子显微镜（TEM／SEM）等方法研究土法炼锌固体废物的矿物组成，特别是重金属Pb和Zn的矿物学赋存特征。结果表明：固体废物是一种高度不均匀的复杂集合体。废渣主要是由石英、长石、碳酸盐矿物、铁质和铝质的非晶质玻璃以及少量风化次生矿物相组成。Pb在废渣中主要以金属Pb形式存在，或呈纳米金属Pb颗粒包裹或吸附于其它矿物表面及玻璃质集合体中。废渣中Zn的存在形式比Pb复杂得多，有硅锌矿、 锰硅锌矿、丝锌铝石等矿物存在形式，在其它矿物表面或玻璃质集体体中也能见到少量纳米级金属Zn。

海南土壤中Zn、Pb、Cu、Cd四种重金属含量及其生物有效性的研究

对海南63 个土壤样品中的Zn、Pb、Cu、Cd 四种重金属的总量和生物有效态含量以及45 个植物样(根、茎、叶) 中的重金属含量分别进行了测定,采样点基本上覆盖了海南全省,测定结果表明,土壤中Zn 总量低于全国平均值,而Pb、Cu、Cd 高于全国平均值,土壤中重金属生物有效态含量一般低于其总量的10 % ,其中Pb 最高为7. 71 % ,而Cu 仅为1. 13 % ,具有较大的变异性;植物中重金属含量与土壤中重金属总量呈现负相关性,但与土壤中有效态重金属含量一般呈现正相关性,叶中的重金属含量与土壤中有效态重金属含量之间的相关性更为显著,叶中的重金属含量与土壤中有效态重金属含量之间的相关系数分别为: Zn (01726) ,Cu (01626) , Pb(01774) ,Cd(01512) 。这说明土壤中重金属总量并不能全面的评价土壤的环境效应和重金属的生物有效性,应该把重金属总量和生物有效态含量结合起来加以研究,并应将土壤中重金属的含量与植物中该元素含量之间作相关分析,根据其相关系数的大小来判断其生物有效性的程度。