Liquid crystalline elastomers: the relationship between macroscopic behaviour and the level of backbone anisotropy

Nematic monodomain liquid crystalline elastomers have been prepared through in situ cross-linking of an acrylate based side-chain liquid crystalline polymer in a magnetic field. At the nematic–isotropic transition, the sample is found to undergo an anisotropic shape change. There is found to be an increase in dimensions perpendicular — and a decrease parallel — to the director, this is consistent with alignment of the polymer backbone parallel to the direction of mesogen alignment in the nematic state. From a quantitative investigation of this behaviour, we estimate the level of backbone anisotropy for the elastomer. As second measure of the backbone anisotropy, the monodomain sample was physically extended. We have investigated, in particular, the situation where a monodomain sample is deformed with the angle between the director and the extension direction approaching 90°. The behaviour on extension of these acrylate samples is related to alternative theoretical interpretations and the backbone anisotropy determined. Comparison of the chain anisotropy derived from these two approaches and the value obtained from previous small-angle neutron scattering measurements on deuterium labelled mixtures of the same polymer shows that some level of chain anisotropy is retained in the isotropic or more strictly weakly paranematic state of the elastomer. The origin and implications of this behaviour are discussed.

Root growth models: towards a new generation of continuous approaches

Models of root system growth emerged in the early 1970s, and were based on mathematical representations of root length distribution in soil. The last decade has seen the development of more complex architectural models and the use of computer-intensive approaches to study developmental and environmental processes in greater detail. There is a pressing need for predictive technologies that can integrate root system knowledge, scaling from molecular to ensembles of plants. This paper makes the case for more widespread use of simpler models of root systems based on continuous descriptions of their structure. A new theoretical framework is presented that describes the dynamics of root density distributions as a function of individual root developmental parameters such as rates of lateral root initiation, elongation, mortality, and gravitropsm. The simulations resulting from such equations can be performed most efficiently in discretized domains that deform as a result of growth, and that can be used to model the growth of many interacting root systems. The modelling principles described help to bridge the gap between continuum and architectural approaches, and enhance our understanding of the spatial development of root systems. Our simulations suggest that root systems develop in travelling wave patterns of meristems, revealing order in otherwise spatially complex and heterogeneous systems. Such knowledge should assist physiologists and geneticists to appreciate how meristem dynamics contribute to the pattern of growth and functioning of root systems in the field.

Passive and active hybrid approach to buildings design in Saudi Arabia

The building sector is one of the highest consumers of energy in the world. This has led to high dependency on using fossil fuel to supply energy without due consideration to its environmental impact. Saudi Arabia has been through rapid development accompanied by population growth, which in turn has increased the demand for construction. However, this fast development has been met without considering sustainable building design. General design practices rely on using international design approaches and features without considering the local climate and aspects of traditional passive design. This is by constructing buildings with a large amount of glass fully exposed to solar radiation. The aim of this paper is to investigate the development of sustainability in passive design and vernacular architecture. Furthermore, it compares them with current building in Saudi Arabia in terms of making the most of the climate. Moreover, it will explore the most sustainable renewable energy that can be used to reduce the environmental impact on modern building in Saudi Arabia. This will be carried out using case studies demonstrating the performance of vernacular design in Saudi Arabia and thus its benefits in terms of environmental, economic and social sustainability. It argues that the adoption of a hybrid approach can improve the energy efficiency as well as reduce the carbon footprint of buildings. This is by combining passive design, learning from the vernacular architecture and implementing innovative sustainable technologies.

Climate change and agricultural adaptation in Sri Lanka: a review

Climate change is inevitable and will continue into the next century. Since the agricultural sector in Sri Lanka is one of the most vulnerable to climate change, a thorough understanding of climate transition is critical for formulating effective adaptation strategies. This paper provides an overview of the status of climate change and adaptation in the agricultural sector in Sri Lanka. The review clearly indicates that climate change is taking place in Sri Lanka in terms of rainfall variability and an increase in climate extremes and warming. A number of planned and reactive adaptation responses stemming from policy and farm-level decisions are reported. These adaptation efforts were fragmented and lacked a coherent connection to the national development policies and strategies. Research efforts are needed to develop and identify adaptation approaches and practices that are feasible for smallholder farmers, particularly in the dry zone where paddy and other food crops are predominately cultivated. To achieve the envisaged growth in the agricultural sector, rigorous efforts are necessary to mainstream climate change adaptation into national development policies and ensure that they are implemented at national, regional and local levels.

An in-depth view of the facets, antecedents and effects of leaders’ change competency: lessons from a case study

Leaders across companies initiate and implement change and thus are crucial for successful organizations. This study takes a competency perspective on leaders and investigates the competencies leaders show to facilitate effective change. The article explores the content of the construct of leaders’ change competency and examines its antecedents and effects. We conducted a case study in a German tourism company undergoing a major change process. The study identified (a) distinct content facets regarding the construct of leaders’ change competency along its two dimensions of leaders’ readiness for change and leaders’ change ability; (b) the construct’s antecedents, specifically contextual factors, leaders’ competency potentials, and attitudes toward change; and (c) beneficial effects of leaders’ change competency. The study ends with implications for research and leadership practice as well as suggestions for future studies on leaders’ change competency.

Scaling up data mining techniques to large datasets using parallel and distributed processing

Advances in hardware and software technology enable us to collect, store and distribute large quantities of data on a very large scale. Automatically discovering and extracting hidden knowledge in the form of patterns from these large data volumes is known as data mining. Data mining technology is not only a part of business intelligence, but is also used in many other application areas such as research, marketing and financial analytics. For example medical scientists can use patterns extracted from historic patient data in order to determine if a new patient is likely to respond positively to a particular treatment or not; marketing analysts can use extracted patterns from customer data for future advertisement campaigns; finance experts have an interest in patterns that forecast the development of certain stock market shares for investment recommendations. However, extracting knowledge in the form of patterns from massive data volumes imposes a number of computational challenges in terms of processing time, memory, bandwidth and power consumption. These challenges have led to the development of parallel and distributed data analysis approaches and the utilisation of Grid and Cloud computing. This chapter gives an overview of parallel and distributed computing approaches and how they can be used to scale up data mining to large datasets.

Sensors and the city: a review of urban meteorological networks

The heterogeneous nature of urban environments means that atmospheric research ideally requires a dense network of sensors to adequately resolve the local climate. With recent advances in sensor technology, a number of urban meteorological networks now exist with a range of research or operational objectives. This article reviews and assesses the current status of urban meteorological networks, by examining the fundamental scientific and logistical issues related to these networks. The article concludes by making recommendations for future deployments based on the challenges encountered by existing networks, including the need for better reporting and documentation of network characteristics, standardized approaches and guidelines, along with the need to overcome financial barriers via collaborative relationships in order to establish the long-term urban networks essential for advancing urban climate research. Copyright © 2013 Royal Meteorological Society

Present state of global wetland extent and wetland methane modelling: methodology of a model inter-comparison project (WETCHIMP)

The Wetland and Wetland CH4 Intercomparison of Models Project (WETCHIMP) was created to evaluate our present ability to simulate large-scale wetland characteristics and corresponding methane (CH4) emissions. A multi-model comparison is essential to evaluate the key uncertainties in the mechanisms and parameters leading to methane emissions. Ten modelling groups joined WETCHIMP to run eight global and two regional models with a common experimental protocol using the same climate and atmospheric carbon dioxide (CO2) forcing datasets. We reported the main conclusions from the intercomparison effort in a companion paper (Melton et al., 2013). Here we provide technical details for the six experiments, which included an equilibrium, a transient, and an optimized run plus three sensitivity experiments (temperature, precipitation, and atmospheric CO2 concentration). The diversity of approaches used by the models is summarized through a series of conceptual figures, and is used to evaluate the wide range of wetland extent and CH4 fluxes predicted by the models in the equilibrium run. We discuss relationships among the various approaches and patterns in consistencies of these model predictions. Within this group of models, there are three broad classes of methods used to estimate wetland extent: prescribed based on wetland distribution maps, prognostic relationships between hydrological states based on satellite observations, and explicit hydrological mass balances. A larger variety of approaches was used to estimate the net CH4 fluxes from wetland systems. Even though modelling of wetland extent and CH4 emissions has progressed significantly over recent decades, large uncertainties still exist when estimating CH4 emissions: there is little consensus on model structure or complexity due to knowledge gaps, different aims of the models, and the range of temporal and spatial resolutions of the models.

Modelling of urban sensible heat flux at multiple spatial scales : a demonstration using airborne hyperspectral imagery of Shanghai and a temperature–emissivity separation approach

Urbanization related alterations to the surface energy balance impact urban warming (‘heat islands’), the growth of the boundary layer, and many other biophysical processes. Traditionally, in situ heat flux measures have been used to quantify such processes, but these typically represent only a small local-scale area within the heterogeneous urban environment. For this reason, remote sensing approaches are very attractive for elucidating more spatially representative information. Here we use hyperspectral imagery from a new airborne sensor, the Operative Modular Imaging Spectrometer (OMIS), along with a survey map and meteorological data, to derive the land cover information and surface parameters required to map spatial variations in turbulent sensible heat flux (QH). The results from two spatially-explicit flux retrieval methods which use contrasting approaches and, to a large degree, different input data are compared for a central urban area of Shanghai, China: (1) the Local-scale Urban Meteorological Parameterization Scheme (LUMPS) and (2) an Aerodynamic Resistance Method (ARM). Sensible heat fluxes are determined at the full 6 m spatial resolution of the OMIS sensor, and at lower resolutions via pixel aggregation and spatial averaging. At the 6 m spatial resolution, the sensible heat flux of rooftop dominated pixels exceeds that of roads, water and vegetated areas, with values peaking at ∼ 350 W m− 2, whilst the storage heat flux is greatest for road dominated pixels (peaking at around 420 W m− 2). We investigate the use of both OMIS-derived land surface temperatures made using a Temperature–Emissivity Separation (TES) approach, and land surface temperatures estimated from air temperature measures. Sensible heat flux differences from the two approaches over the entire 2 × 2 km study area are less than 30 W m− 2, suggesting that methods employing either strategy maybe practica1 when operated using low spatial resolution (e.g. 1 km) data. Due to the differing methodologies, direct comparisons between results obtained with the LUMPS and ARM methods are most sensibly made at reduced spatial scales. At 30 m spatial resolution, both approaches produce similar results, with the smallest difference being less than 15 W m− 2 in mean QH averaged over the entire study area. This is encouraging given the differing architecture and data requirements of the LUMPS and ARM methods. Furthermore, in terms of mean study QH, the results obtained by averaging the original 6 m spatial resolution LUMPS-derived QH values to 30 and 90 m spatial resolution are within ∼ 5 W m− 2 of those derived from averaging the original surface parameter maps prior to input into LUMPS, suggesting that that use of much lower spatial resolution spaceborne imagery data, for example from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) is likely to be a practical solution for heat flux determination in urban areas.

Spatial economics and ecosystems: the interaction between economics and the natural environment

This collection of original research and review articles and has been designed with the joint aims of inspiring future work and of reminding environmental economists and researchers from other disciplines that looking for similarities and common features in their studies is more important than magnifying their differences. It is also suitable for use as a postgraduate text. The volume reflects the endeavour of mainstream economic thought to include, amongst its chief concerns, the study of all complex interactions between economies and natural space. It also documents efforts made by economists and other scientists to study the complex phenomenon of individual and collective decision making when faced with problems linking economic activity with the environment. Presenting a pluralistic view of approaches and methodologies, rather than an exhaustive list of topics of interest to environmental scientists, the editors have brought together innovative contributions that can be read as self-contained pieces of work.

Cities’ low carbon plans in an ‘age of austerity’: an analysis of UK local authority actions, attitudes and responses

Background: Cities play a significant role globally in creating carbon emissions but, as centers of major population, innovation and social practice, they also offer important opportunities to tackle climate change. The new challenges faced by cities in an ‘age of austerity’ and decentralist agendas present substantial challenges for coordinated multilevel governance. Results: Based on research carried out in 2011–2012, this paper examines the attitudes and responses of sustainability and climate change officers in UK cities that have prepared low carbon and climate change plans, in the context of these challenges. Using a conceptual framework that analyses ‘awareness’, ‘analysis’ and ‘actions’ (in the context of spending cuts and a new ‘decentralized’ policy agenda) this research suggests that progress on low-carbon futures for cities continues to be fragmented, with increased funding constraints, short-termism and lack of leadership acting as key barriers to progress. Conclusion: Recent UK national policies (including localism, austerity measures and new economic incentives) have not only created further uncertainties, but also scope for cities’ local innovation through policy leverage and self-governing actions.

Educating integrated catalysts: transforming business schools toward ethics and sustainability

Joining the sharpening critique of conventional University-based business school education, we argue that educating integrated catalysts is necessary to meet current sustainability challenges. The key feature of moving toward the integration required at the individual level is focusing on developing students' capacity for moral and cognitive maturity. Practically, this makes the practice of genuine dialogue focal as core interpersonal method for educating management students. In supporting such education, business schools must however first transform themselves. Acting as transformative social enterprises, they can demonstrate being a part in critically questioning and improving the impact and relevance of management on the flourishing of wider society and the practice of an ethically oriented economy. We offer practical suggestions and implications for future business education reform.

Individual assets, market structure and the drivers of return

Much UK research and market practice on portfolio strategy and performance benchmarking relies on a sector‐geography subdivision of properties. Prior tests of the appropriateness of such divisions have generally relied on aggregated or hypothetical return data. However, the results found in aggregate may not hold when individual buildings are considered. This paper makes use of a dataset of individual UK property returns. A series of multivariate exploratory statistical techniques are utilised to test whether the return behaviour of individual properties conforms to their a priori grouping. The results suggest strongly that neither standard sector nor regional classifications provide a clear demarcation of individual building performance. This has important implications for both portfolio strategy and performance measurement and benchmarking. However, there do appear to be size and yield effects that help explain return behaviour at the property level.

Poetry on Pre-Raphaelite principles: science, nature and knowledge in William Michael Rossetti’s 'Fancies at Leisure' and 'Mrs. Holmes Grey'

This article demonstrates how early Pre-Raphaelite poetry worked according to the principle that art should be modelled on science theorised by the Pre-Raphaelites in their early essays. As the main theorists (rather than practitioners) of Pre-Raphaelite art, F. G. Stephens and William Michael Rossetti defined the Pre-Raphaelite project in terms of observation, investigation, experiment, the “adherence to fact” and the “search after truth”. In the hands of the early Pre-Raphaelite poets, and particularly Rossetti himself, poetry too becomes a mode of scientific enquiry into the natural world, the nature of observation, human psychology and medical practice.

Monastic and church archaeology

Major advances in church and monastic archaeology are discussed in terms of two distinct waves, ca. 1970–1995 and 1995 to the time of writing (2014). The first wave was influenced by landscape history and processual archaeology; scholarship focused principally on historical, economic, and technological questions and targeted individual sites and monuments for study. The second wave has been informed by postprocessual approaches and considers change and complexity in religious landscapes and perspectives on religious space, embodiment, and agency. In conclusion, this article calls for a more holistic approach to the archaeology of medieval Christian belief, one which moves beyond the focus on institutions and monuments that has characterized monastic and church archaeology and extends archaeological study to include the performative rituals of Christian life and death in the Middle Ages.