Análise de um queimador infravermelho funcionando com combustível híbrido : GLP/Bio-óleo

Biomass is considered the largest renewable energy source that can be used in an environmentally sustainable. From the pyrolysis of biomass is possible to obtain products with higher energy density and better use properties. The liquid resultant of this process is traditionally called bio-oil. The use of infrared burners in industrial applications has many advantages in terms of technical-operational, for example, uniformity in the heat supply in the form of radiation and convection, with a greater control of emissions due to the passage of exhaust gases through a macroporous ceramic bed. This paper presents a commercial infrared burner adapted with an ejector proposed able to burn a hybrid configuration of liquefied petroleum gas (LPG) and bio-oil diluted. The dilution of bio-oil with absolute ethanol aimed to decrease the viscosity of the fluid, and improving the stability and atomization. It was introduced a temperature controller with thermocouple modulating two stages (low heat / high heat), and solenoid valves for fuels supply. The infrared burner has been tested, being the diluted bio-oil atomized, and evaluated its performance by conducting energy balance. The method of thermodynamic analysis to estimate the load was used an aluminum plate located at the exit of combustion gases and the distribution of temperatures measured by thermocouples. The dilution reduced the viscosity of the bio-oil in 75.4% and increased by 11% the lower heating value (LHV) of the same, providing a stable combustion to the burner through the atomizing with compressed air and burns combined with LPG. Injecting the hybrid fuel there was increase in the heat transfer from the plate to the environment in 21.6% and gain useful benefit of 26.7%, due to the improved in the efficiency of the 1st Law of Thermodynamics of infrared burner

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Avaliação de efeitos toxicológicos e comportamentais de ginseng panax em ratos

Panax ginseng CA Meyer (Araliaceae) is a herbaceous plant widely used in China, South Korea, Japan and other Asian countries for the treatment of various diseases micro circulatory, cerebrovascular, among others, representing one of the drugs used by older man. It has over 30 biologically active ginsenosides with different pharmacological and behavioral effects and inhibitory effect on the NMDA receptor. The amino acid glycine is a co-agonist of the NMDA receptor, activating this receptor. At the cellular level, ketamine is widely known to be NMDA receptor antagonist. The aim of this study was to evaluate the general activity in the open field, and anxiety in elevated plus maze, mice treated with P. ginseng compared with the action of ketamine and glycine, to better understand the action of this herbal medicine at the NMDA receptor. We used 66 adult male rats were divided into six groups: a positive control, treated for 30 days with water by gavage, who received glycine (500mg/kg; po) on days 7, 14, 21 and 28 of treatment, one hour before of behavioral assessment, a negative control was treated for 30 days with water by gavage received ketamine (5mg/kg, ip) on days 7, 14, 21 and 28 of treatment, one hour prior to behavioral evaluation, three experimental groups, receiving 100, 200 or 300 mg / kg P. ginseng by gavage for 30 days and one group treated solely with white water, and is also administered 1 ml of water by gavage one hour prior to behavioral evaluation. Animal behavior in these three groups was also examined on days 7, 14, 21 and 28 of treatment. On day 30 of treatment, the animals were anesthetized with thiopental (70mg/kg) for blood collection and after euthanasia, withdrawal of various organs. There were no changes in weight and body weight gain and weight reasons in organ / body weight. However the consumption of water and food values showed a significant increase. Serum levels of AST was increased in a dose-dependently in the animals treated with doses of P. ginseng, glycine and ketamine as compared to the blank group. Unlike creatinine levels proved to be decreased in all treated groups when compared with white. However, the level of urea in these groups was reduced and no changes were observed in the ALT parameter. Histopathological examination revealed no changes in cell morphology in different tissues. There were no behavioral changes in the elevated plus maze and few changes were observed in the open field, animals treated with P. ginseng, glycine and ketamine when compared to white. These data suggest that the doses of P. ginseng employed were unable to induce general toxicity in rats treated for 30 days and also shows that the general behavior of mice treated with P. ginseng was slightly different from that observed in animals treated with ketamine and glycine. Finally, the study on the elevated plus maze showed that the extract of P. ginseng showed no anxiolytic or anxiogenic action

Análise espacial dos fatores da equação universal de perda de solo em área de nascentes

O objetivo deste trabalho foi avaliar a perda de solo de área de nascentes da Microbacia do Córrego do Tijuco, SP. Foi utilizada a análise espacial dos fatores da equação universal da perda de solo (EUPS), em integração com análise de componentes principais e geoestatística. A perda de solo média, estimada para a área, foi de 118,5 Mg ha‑1 por ano, considerada alta. Próximo à zona urbana, houve alta interação dos fatores erosividade da chuva e práticas conservacionistas, o que evidencia grande perda de solo, em razão da concentração da água proveniente da camada impermeabilizada urbana, com alta velocidade de escoamento. Nos divisores de águas, a atuação da erodibilidade foi proeminente, em contraste com o fator topográfico. Foram observadas áreas com atuação conjunta destes fatores, inclusive em locais de inclinação suave, porém com alto potencial natural de erosão. A interação das análises multivariadas e geoestatística permite a estratificação da área, identifica locais com propriedades específicas quanto à perda de solo, e espacializa os fatores do processo erosivo e suas interações ao longo do relevo.

Composição nutricional e avaliação de rótulo de rações secas para cães comercializadas em Jaboticabal-SP

Avaliaram-se 49 marcas de rações para cães adultos e filhotes comercializadas em Jaboticabal-SP. Os alimentos foram divididos em três segmentos: econômico, standard e super-premium. Nessa ordem, as rações para cães adultos apresentaram, em média, 16,9%, 20,9% e 27,8% de proteína, 9,7%, 10,5% e 15% de gordura, 6,4%, 2,9% e 1,1% de fibra e 1,9%, 1,9% e 1,4% de Ca. Para filhotes, os produtos standard e super-premium apresentaram, respectivamente, 26,1% e 31,0% de proteína, 10,8% e 15,2% de gordura, 2,6% e 2,4% de fibra, 2,1% e 1,7% de Ca e 1,6% e 1,3% de P. A porcentagem de rações cujos teores nutricionais declarados no rótulo não estavam de acordo com os encontrados nas análises de laboratório foi, para os produtos super-premium para filhotes, 80,0% para o Ca e 60,0% para a gordura; para os produtos standard para filhotes, 28,6% para proteína e 57,2% para o cálcio; para os produtos econômicos para cães adultos, 44,0% para a fibra e 33,0% para a proteína; para os produtos standard para cães adultos de 33,0% para a gordura e 50,0% para o Ca; e para os produtos super-premium para cães adultos, 50,0% para o cálcio e 33,0% para a gordura. Foram encontradas inadequações nutricionais em produtos, como teores insuficientes de proteína e altas concentrações de fibra, cálcio e fósforo.

Production technology for entomopathogenic fungus using a biphasic culture system

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controle biológico de Colletotrichum acutatum, agente causal da queda prematura dos frutos cítricos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fugindo da banalidade: o uso do orkut como extensão da sala de aula

This dissertation investigated the insert and use of the education technologies in the on-line social net Orkut, as an extension of the classroom, especially for debates. With that experience accomplished in a discipline of a Brazilian public institution of higher education, it was tried to go beyond the use of the atmosphere for entertainment and to look Orkut as a tool of assistance to the process of teaching and learning. The research was based in the Paulo Freire´s communication concept and in the Célestin Freinet´s school cooperation concept. In this dissertation, in methodological terms, was adopted the category of the qualitative research. The adopted method was a combination of case´s study with research-action. The technique was the application of questionnaires, the collect of data was personal and the types of data were primary. Finally, introduces, then, prognostics about the future of the on-line social nets and finally suggest the formation of academicals on-line social networks

Inclusão da criança com deficiência na estratégia de saúde da família

The objective of analyze the shift of the working process of the ESF team in care of children with disabilities, from awareness-raising actions. It is a qualitative study, with the action-research method. Thirteen health professionals were involved from two teams of ESF unit area of the Unidade de Saúde da Família Dr. Chico Porto (UBSFCP) in Mossoró, from March to August 2011. Data were analyzed following the direction of freirean s thematic analysis. In the situational diagnosis of the current reality of CwD assistance in that UBSFCP, through participant observation and application of semi-structured interviews with professionals, we realize that despite these actions carry some assistance to the CwD, in practice few are used for inclusion and accessibility. The monitoring of the CwD is done through individual consultations by each team professional, home visits when possible, both ruled on the complaints and problems, with little solving in the used actions. Since the need for a change in the treatment model and training requirements as pointed out by professionals in the interview, then we decided to build the proposed of training suggested by the multidisciplinary team and put together collectively the achievement of this moment in all its phases. In the step of implementation (action), aspects related to the current situation in Brazil and Mossoró (Laws, policies and health care) for the CwD and CwD Assistance and their family in the ESF in the first two moments of the first training (action) were contemplate. On the second day we discussed the specialized care to CwD, contribution of the Handicapped Parents and Friends Association of Mossoró and in a second moment a workshop was held in which awareness for inclusion of CwD and actions of ESF were discussed. All these moments were discussed and collectively constructed. In the evaluation, we found that implementation (action) allowed to the professional the comprehension of new understandings about people with disabilities, on ways to include, guiding, caring, watching, and mainly to have a new vision on health assistance of the CwD, expanding assistance beyond clinical aspects and recognizing the educational aspects of the rights and duties of citizens and the inclusion of these children in the social spaces area. As difficulties, we face the need for some professionals to be absent to attend another job, solve personal problems, and little or no participation. Thus, during this action-research, the subjects were able to realize the importance of carrying out their practice to the quality of life for him and to the one they care

FITOTOXICIDADE DE FUNGICIDAS, ACARICIDAS E INSETICIDAS, SOBRE O MAMOEIRO (Carica papaya L.) CULTIVAR SUNRISE SOLO IMPROVED LINE 72/12 em CONDIÇÕES DE CAMPO

A presente pesquisa teve como objetivo estudar os efeitos fitotóxicos de fungicidas, acaricidas e inseticidas e algumas associações entre eles, em plantas de mamoeiros (Carica papaya L.) cv. Sunrise Solo Improved Line 72/12, em condições de campo, no município de São Mateus -- ES, pertencente à maior região produtora do Estado. O experimento foi arranjado em delineamento de blocos casualizados, com 4 repetições e 03 plantas úteis por parcela. Foram utilizados os seguintes produtos, com as respectivas doses, para cada 100 L de água: chlorothalonil (Daconil PM-200g); mancozeb (Dithane PM -- 200g); oxicloreto de cobre (Reconil -- 400g); thiabendazole (Tecto 450 -- 100ml); dicofol + tetradifon (Carbax -- 200ml); triazophós (Hostathion 400 BR -- 150ml); óxido de fenbutatina (Torque 500 SC -- 60ml); e abamectin (Vertimec 18 CE -- 50ml): Analisou-se a fitotoxicidade dos produtos testados, em relação à altura da planta, nº de folhas, número de flores e frutos ; diâmetro do caule e queimaduras ou injúrias foliares. As datas das avaliações foram: 01 dia antes das pulverizações, 15 dias e 30 dias após as mesmas. Os fungicidas Daconil BR, Reconil e Tecto 450; o fungicida acaricida Dithane PM; os acaricidas Carbax e Torque 500 SC; e o inseticida-acaricida Vertimec 18 CE, aplicados isoladamente, não afetaram o crescimento e a produção das plantas, nem causaram injúrias nas folhas das mesmas. A associação de fungicidas e fungicida-acaricida, com os acaricidas, ou inseticida-acaricida, não mostrou nenhum efeito fitotóxico sobre os parâmetros de crescimento avaliados, nem causaram queimaduras ou injúrias foliares.

Fitotoxicidade de fungicidas, acaricidas e inseticidas sobre o mamoeiro (Carica papaya L.) cultivar sunrise solo improved line 72/12

Estudaram-se os efeitos fitotóxicos de fungicidas, acaricidas e inseticidas e algumas associações entre eles, em plantas de mamoeiros (Carica papaya L.) cv. Sunrise Solo Improved Line 72/12, em condições de verão, no município de São Mateus - ES, localizado na região produtora do Estado. O experimento foi arranjado em delineamento de blocos casualizados, com 4 repetições e 03 plantas úteis por parcela experimental. Foram utilizados os seguintes produtos, com as respectivas doses, para cada 100 l de água: abamectin (Vertimec 18 CE - 50 ml); dicofol + tetradiphon (Carbax - 200 ml), fenbutatin oxide (Torque 500 SC - 60 ml); mancozeb (Dithane PM - 200g); oxicloreto de cobre (Reconil - 400g) e thiabendazole (Tecto 450 - 100ml). Analisou-se a fitotoxicidade dos produtos em relação à altura da planta, nº de folhas, número de flores e frutos ; diâmetro do caule e queimaduras ou injúrias foliares. As medições e contagens foram feitas um dia antes das pulverizações, 15 e 30 dias após. Constatou-se que o Vertimec 18 CE, associado ao Reconil ou ao Tecto 450, ocasionou leves injúrias foliares, detectadas aos 15 dias após as pulverizações, que se tornaram praticamente imperceptíveis, aos 30 dias após as pulverizações; e que Dithane PM, Reconil, Tecto 450, Carbax, Torque 500 SC, Dithane PM + Carbax, Dithane PM + Torque 500 SC, Dithane PM + Vertimec 18 CE, Reconil + Carbax, Reconil + Torque 500 SC, Tecto 450 + Carbax e, Tecto 450 + + Torque 500 SC não interferiram nos parâmetros de desenvolvimento e de produção estudados, bem como não causaram injúrias ou queimaduras nas folhas dos mamoeiros.

Altura da garupa e sua associação com características reprodutivas e de crescimento na raça Nelore

O objetivo deste trabalho foi determinar os fatores que afetam a altura da garupa em diferentes idades, em bovinos Nelore, e estimar a herdabilidade e as correlações genéticas entre esse caractere e as características reprodutivas e de crescimento. Os caracteres avaliados foram: altura da garupa à desmama, altura da garupa ao sobreano, peso à desmama, peso ao sobreano, perímetro escrotal e idade ao primeiro parto. Os fatores considerados foram: ano e mês de nascimento, rebanho, sexo, idade da vaca ao parto e idade do bezerro. Os componentes de variância e covariância foram estimados pela metodologia de máxima verossimilhança restrita, tendo-se utilizado um modelo animal. Todos os efeitos foram significativos para altura de garupa nas diferentes idades. As estimativas de herdabilidade quanto ao efeito genético direto indicaram que as características de crescimento e reprodutivas respondem à seleção, exceto a idade ao primeiro parto. As correlações genéticas entre as características de crescimento foram todas positivas e elevadas, de 0,42 a 0,90, o que indica que são determinadas em grande parte pelos mesmos conjuntos de genes de ação aditiva. em razão das baixas magnitudes das estimativas de correlação genética (entre -0,14 e 0,16), a eficiência reprodutiva é pouco influenciada pela seleção quanto à altura de garupa.

Efeitos de ambiente e estimativas de parâmetros genéticos para características de carcaça em bovinos da raça Canchim criados em pastagem

Os objetivos neste trabalho foram estudar os efeitos de ambiente sobre a espessura de gordura subcutânea (EGS), a área de olho-de-lombo (AOL) e o peso aos 19 meses de idade e estimar parâmetros genéticos para essas características. Utilizaram-se informações obtidas de 987 bovinos da raça Canchim (5/8 Charolês + 3/8 Zebu) e do grupo genético animal MA (filhos de touros charoleses e vacas 1/2 Canchim + 1/2 Zebu) nascidos em 2003, 2004 e 2005. Os componentes de covariância foram estimados pelo método da máxima verossimilhança restrita utilizando-se um modelo animal com efeitos fixos (ano de nascimento, grupo genético, rebanho e sexo) e os efeitos aleatórios genético aditivo direto e residual. As médias de área de olho-de-lombo e peso foram mais altas nos machos que nas fêmeas. No grupo genético MA, as médias para todas as características foram mais altas que na raça Canchim e houve ainda efeitos de rebanho e de ano de nascimento. As estimativas de herdabilidade para AOL (0,33 ± 0,09), EGS (0,24 ± 0,09) e peso (0,23 ± 0,09) foram moderadas, enquanto que a estimativa de correlação genética (0,21 ± 0,24) entre EGS e AOL foi baixa, o que sugere que essas características são controladas por diferentes conjuntos de genes de ação aditiva. As correlações genéticas para peso estimadas com EGS (0,57 ± 0,23) e com AOL (0,62 ± 0,16) foram moderadas. Conclui-se que as características ao sobreano devem responder à seleção nos rebanhos estudados e que a seleção para aumento de peso também eleva EGS e AOL e vice-versa.

Sistema Híbrido de Inferência Baseado em Análise de Componentes Principais e Redes Neurais Artificiais Aplicado a Plantas de Processamento de Gás Natural

Nowadays, where the market competition requires products with better quality and a constant search for cost savings and a better use of raw materials, the research for more efficient control strategies becomes vital. In Natural Gas Processin Units (NGPUs), as in the most chemical processes, the quality control is accomplished through their products composition. However, the chemical composition analysis has a long measurement time, even when performed by instruments such as gas chromatographs. This fact hinders the development of control strategies to provide a better process yield. The natural gas processing is one of the most important activities in the petroleum industry. The main economic product of a NGPU is the liquefied petroleum gas (LPG). The LPG is ideally composed by propane and butane, however, in practice, its composition has some contaminants, such as ethane and pentane. In this work is proposed an inferential system using neural networks to estimate the ethane and pentane mole fractions in LPG and the propane mole fraction in residual gas. The goal is to provide the values of these estimated variables in every minute using a single multilayer neural network, making it possibly to apply inferential control techniques in order to monitor the LPG quality and to reduce the propane loss in the process. To develop this work a NGPU was simulated in HYSYS R software, composed by two distillation collumns: deethanizer and debutanizer. The inference is performed through the process variables of the PID controllers present in the instrumentation of these columns. To reduce the complexity of the inferential neural network is used the statistical technique of principal component analysis to decrease the number of network inputs, thus forming a hybrid inferential system. It is also proposed in this work a simple strategy to correct the inferential system in real-time, based on measurements of the chromatographs which may exist in process under study

Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise