Knowledge acquisition in international strategic alliances among Malaysian manufacturing firms

This thesis examines the process of knowledge acquisition by Malaysian manufacturing firms through their involvement in international strategic alliances. The strategic alliances can be with or without equity involvement. Firms involved with a foreign partner with equity involvement are joint venture firms while non-equity involvement are firms that engaged in contractual agreements. Using empirical evidence from 65 international alliances gathered through a survey conducted in high-technology manufacturing sectors, several factors that influence the process of knowledge acquisition are examined. The factors are: learning capacity, experience, goals, active involvement and accessibility to the foreign knowledge. Censored regression analysis and ordered probit analysis are used to analyse the effects of these factors on knowledge acquisition and its determinant parts, and the effects of knowledge acquisition and its determinants on the performance of the alliances. A second questionnaire gathered evidence relating to the factors, which encouraged tacit knowledge transfer between the foreign and Malaysian partners in international alliances. The key findings of the study are: knowledge acquisition in international strategic alliances is influenced by five determining factors; learning capacity, experience, articulated goals, active involvement and accessibility; new technology knowledge, product development knowledge and manufacturing process knowledge are influenced differently by the determining factors; knowledge acquisition and its determinant factors have a significant impact on the firm’s performance; cultural differences tend to moderate the effect on the firm’s performance; acquiring tacit knowledge is not only influenced by the five determinant factors but also by other factors, such as dependency, accessibility, trust, manufacturing control, learning methods and organisational systems; Malaysian firms involved in joint ventures tend to acquire more knowledge than those involved in contractual agreements, but joint ventures also exhibit higher degrees of dependency than contractual agreements; and the presence of R&D activity in the Malaysian partner encourages knowledge acquisition, but the amount of R&D expenditure has no effect on knowledge acquisition.

The human factors of automatic speech recognition in control room systems

This thesis addresses the viability of automatic speech recognition for control room systems; with careful system design, automatic speech recognition (ASR) devices can be useful means for human computer interaction in specific types of task. These tasks can be defined as complex verbal activities, such as command and control, and can be paired with spatial tasks, such as monitoring, without detriment. It is suggested that ASR use be confined to routine plant operation, as opposed the critical incidents, due to possible problems of stress on the operators' speech.  It is proposed that using ASR will require operators to adapt a commonly used skill to cater for a novel use of speech. Before using the ASR device, new operators will require some form of training. It is shown that a demonstration by an experienced user of the device can lead to superior performance than instructions. Thus, a relatively cheap and very efficient form of operator training can be supplied by demonstration by experienced ASR operators. From a series of studies into speech based interaction with computers, it is concluded that the interaction be designed to capitalise upon the tendency of operators to use short, succinct, task specific styles of speech. From studies comparing different types of feedback, it is concluded that operators be given screen based feedback, rather than auditory feedback, for control room operation. Feedback will take two forms: the use of the ASR device will require recognition feedback, which will be best supplied using text; the performance of a process control task will require task feedback integrated into the mimic display. This latter feedback can be either textual or symbolic, but it is suggested that symbolic feedback will be more beneficial. Related to both interaction style and feedback is the issue of handling recognition errors. These should be corrected by simple command repetition practices, rather than use error handling dialogues. This method of error correction is held to be non intrusive to primary command and control operations. This thesis also addresses some of the problems of user error in ASR use, and provides a number of recommendations for its reduction.

Quantitative methods in neuropathology

The last decade has seen a considerable increase in the application of quantitative methods in the study of histological sections of brain tissue and especially in the study of neurodegenerative disease. These disorders are characterised by the deposition and aggregation of abnormal or misfolded proteins in the form of extracellular protein deposits such as senile plaques (SP) and intracellular inclusions such as neurofibrillary tangles (NFT). Quantification of brain lesions and studying the relationships between lesions and normal anatomical features of the brain, including neurons, glial cells, and blood vessels, has become an important method of elucidating disease pathogenesis. This review describes methods for quantifying the abundance of a histological feature such as density, frequency, and 'load' and the sampling methods by which quantitative measures can be obtained including plot/quadrat sampling, transect sampling, and the point-quarter method. In addition, methods for determining the spatial pattern of a histological feature, i.e., whether the feature is distributed at random, regularly, or is aggregated into clusters, are described. These methods include the use of the Poisson and binomial distributions, pattern analysis by regression, Fourier analysis, and methods based on mapped point patterns. Finally, the statistical methods available for studying the degree of spatial correlation between pathological lesions and neurons, glial cells, and blood vessels are described.

Innovation in the pharmaceutical industry:a study of the effects of regulation on the U.K. pharmaceutical industry

A history of government drug regulation and the relationship between the pharmaceutical companies in the U.K. and the licensing authority is outlined. Phases of regulatory stringency are identified with the formation of the Committees on Safety of Drugs and Medicines viewed as watersheds. A study of the impact of government regulation on industrial R&D activities focuses on the effects on the rate and direction of new product innovation. A literature review examines the decline in new chemical entity innovation. Regulations are cited as a major but not singular cause of the decline. Previous research attempting to determine the causes of such a decline on an empirical basis is given and the methodological problems associated with such research are identified. The U.K. owned sector of the British pharmaceutical industry is selected for a study employing a bottom-up approach allowing disaggregation of data. A historical background to the industry is provided, with each company analysed or a case study basis. Variations between companies regarding the policies adopted for R&D are emphasised. The process of drug innovation is described in order to determine possible indicators of the rate and direction of inventive and innovative activity. All possible indicators are considered and their suitability assessed. R&D expenditure data for the period 1960-1983 is subsequently presented as an input indicator. Intermediate output indicators are treated in a similar way and patent data are identified as a readily-available and useful source. The advantages and disadvantages of using such data are considered. Using interview material, patenting policies for most of the U.K. companies are described providing a background for a patent-based study. Sources of patent data are examined with an emphasis on computerised systems. A number of searches using a variety of sources are presented. Patent family size is examined as a possible indicator of an invention's relative importance. The patenting activity of the companies over the period 1960-1983 is given and the variation between companies is noted. The relationship between patent data and other indicators used is analysed using statistical methods resulting in an apparent lack of correlation. An alternative approach taking into account variations in company policy and phases in research activity indicates a stronger relationship between patenting activity, R&D Expenditure and NCE output over the period. The relationship is not apparent at an aggregated company level. Some evidence is presented for a relationship between phases of regulatory stringency, inventive and innovative activity but the importance of other factors is emphasised.

The effects of solid contamination in hydraulic fluids on axial piston pumps

The fluids used in hydraulic systems inevitably contain large numbers of small, solid particles, a phenomenon known as 'fluid contamination'. Particles enter a hydraulic system from the environment, and are generated within it by processes of wear. At the same time, particles are removed from the system fluid by sedimentation and in hydraulic filters. This thesis considers the problems caused by fluid contamination, as they affect a manufacturer of axial piston pumps. The specific project aim was to investigate methods of predicting or determining the effects of fluid contamination on this type of pump. The thesis starts with a theoretical analysis of the contaminated lubrication of a slipper-pad bearing. Statistical methods are used to develop a model of the blocking, by particles, of the control capillaries used in such bearings. The results obtained are compared to published, experimental data. Poor correlation between theory and practice suggests that more research is required in this area before such theoretical analysis can be used in industry. Accelerated wear tests have been developed in the U.S.A. in an attempt to predict pump life when operating on contaminated fluids. An analysis of such tests shows that reliability data can only be obtained from extensive test programmes. The value of contamination testing is suggested to be in determining failure modes, and in identifying those pump components which are susceptible to the effects of contamination. A suitable test is described, and the results of a series of tests on axial piston pumps are presented and discussed. The thesis concludes that pump reliability data can only be obtained from field experience. The level of confidence which can be placed in results from normal laboratory testing is shown to be too low for the data to be of real value. Recommendations are therefore given for the ways in which service data should be collected and analysed.

Priority evaluation in transportation policies and programmes

This work is concerned with the development of techniques for the evaluation of large-scale highway schemes with particular reference to the assessment of their costs and benefits in the context of the current transport planning (T.P.P.) process. It has been carried out in close cooperation with West Midlands County Council, although its application and results are applicable elsewhere. The background to highway evaluation and its development in recent years has been described and the emergence of a number of deficiencies in current planning practise noted. One deficiency in particular stood out, that stemming from inadequate methods of scheme generation and the research has concentrated upon improving this stage of appraisal, to ensure that subsequent stages of design, assessment and implementation are based upon a consistent and responsive foundation. Deficiencies of scheme evaluation were found to stem from inadequate development of appraisal methodologies suffering from difficulties of valuation, measurement and aggregation of the disparate variables that characterise highway evaluation. A failure to respond to local policy priorities was also noted. A 'problem' rather than 'goals' based approach to scheme generation was taken, as it represented the current and foreseeable resource allocation context more realistically. A review of techniques with potential for highway problem based scheme generation, which would work within a series of practical and theoretical constraints were assessed and that of multivariate analysis, and classical factor analysis in particular, was selected, because it offerred considerable application to the difficulties of valuation, measurement and aggregation that existed. Computer programs were written to adapt classical factor analysis to the requirements of T.P.P. highway evaluation, using it to derive a limited number of factors which described the extensive quantity of highway problem data. From this, a series of composite problem scores for 1979 were derived for a case study area of south Birmingham, based upon the factorial solutions, and used to assess highway sites in terms of local policy issues. The methodology was assessed in the light of its ability to describe highway problems in both aggregate and disaggregate terms, to guide scheme design, coordinate with current scheme evaluation methods, and in general to improve upon current appraisal. Analysis of the results was both in subjective, 'common-sense' terms and using statistical methods to assess the changes in problem definition, distribution and priorities that emerged. Overall, the technique was found to improve upon current scheme generation methods in all respects and in particular in overcoming the problems of valuation, measurement and aggregation without recourse to unsubstantiated and questionable assumptions. A number of deficiencies which remained have been outlined and a series of research priorities described which need to be reviewed in the light of current and future evaluation needs.

Comparing methods to separate treatment from self-selection effects in an online banking setting

The literature discusses several methods to control for self-selection effects but provides little guidance on which method to use in a setting with a limited number of variables. The authors theoretically compare and empirically assess the performance of different matching methods and instrumental variable and control function methods in this type of setting by investigating the effect of online banking on product usage. Hybrid matching in combination with the Gaussian kernel algorithm outperforms the other methods with respect to predictive validity. The empirical finding of large self-selection effects indicates the importance of controlling for these effects when assessing the effectiveness of marketing activities.

The classification of HLA supertypes by GRID/CPCA and hierarchical clustering methods

Biological experiments often produce enormous amount of data, which are usually analyzed by data clustering. Cluster analysis refers to statistical methods that are used to assign data with similar properties into several smaller, more meaningful groups. Two commonly used clustering techniques are introduced in the following section: principal component analysis (PCA) and hierarchical clustering. PCA calculates the variance between variables and groups them into a few uncorrelated groups or principal components (PCs) that are orthogonal to each other. Hierarchical clustering is carried out by separating data into many clusters and merging similar clusters together. Here, we use an example of human leukocyte antigen (HLA) supertype classification to demonstrate the usage of the two methods. Two programs, Generating Optimal Linear Partial Least Square Estimations (GOLPE) and Sybyl, are used for PCA and hierarchical clustering, respectively. However, the reader should bear in mind that the methods have been incorporated into other software as well, such as SIMCA, statistiXL, and R.

Neural Control of Chaos and Aplications

Signal processing is an important topic in technological research today. In the areas of nonlinear dynamics search, the endeavor to control or order chaos is an issue that has received increasing attention over the last few years. Increasing interest in neural networks composed of simple processing elements (neurons) has led to widespread use of such networks to control dynamic systems learning. This paper presents backpropagation-based neural network architecture that can be used as a controller to stabilize unsteady periodic orbits. It also presents a neural network-based method for transferring the dynamics among attractors, leading to more efficient system control. The procedure can be applied to every point of the basin, no matter how far away from the attractor they are. Finally, this paper shows how two mixed chaotic signals can be controlled using a backpropagation neural network as a filter to separate and control both signals at the same time. The neural network provides more effective control, overcoming the problems that arise with control feedback methods. Control is more effective because it can be applied to the system at any point, even if it is moving away from the target state, which prevents waiting times. Also control can be applied even if there is little information about the system and remains stable longer even in the presence of random dynamic noise.

Simultaneous Control of Chaotic Systems Using RBF Networks

Chaos control is a concept that recently acquiring more attention among the research community, concerning the fields of engineering, physics, chemistry, biology and mathematic. This paper presents a method to simultaneous control of deterministic chaos in several nonlinear dynamical systems. A radial basis function networks (RBFNs) has been used to control chaotic trajectories in the equilibrium points. Such neural network improves results, avoiding those problems that appear in other control methods, being also efficient dealing with a relatively small random dynamical noise.

Enhanced process verification through re-engineering the manufacturing procedure

In today’s modern manufacturing industry there is an increasing need to improve internal processes to meet diverse client needs. Process re-engineering is an important activity that is well understood by industry but its rate of application within small to medium size enterprises (SME) is less developed. Business pressures shift the focus of SMEs toward winning new projects and contracts rather than developing long-term, sustainable manufacturing processes. Variations in manufacturing processes are inevitable, but the amount of non-conformity often exceeds the acceptable levels. This paper is focused on the re-engineering of the manufacturing and verification procedure for discrete parts production with the aim of enhancing process control and product verification. The ideologies of the ‘Push’ and ‘Pull’ approaches to manufacturing are useful in the context of process re-engineering for data improvement. Currently information is pulled from the market and prominent customers, and manufacturing companies always try to make the right product, by following customer procedures that attempt to verify against specifications. This approach can result in significant quality control challenges. The aim of this paper is to highlight the importance of process re-engineering in product verification in SMEs. Leadership, culture, ownership and process management are among the main attributes required for the successful deployment of process re-engineering. This paper presents the findings from a case study showcasing the application of a modified re-engingeering method for the manufacturing and verification process. The findings from the case study indicate there are several advantages to implementing the re-engineering method outlined in this paper.

The effects of material variations in high value manufacturing industries

It has never been easy for manufacturing companies to understand their confidence level in terms of how accurate and to what degree of flexibility parts can be made. This brings uncertainty in finding the most suitable manufacturing method as well as in controlling their product and process verification systems. The aim of this research is to develop a system for capturing the company’s knowledge and expertise and then reflect it into an MRP (Manufacturing Resource Planning) system. A key activity here is measuring manufacturing and machining capabilities to a reasonable confidence level. For this purpose an in-line control measurement system is introduced to the company. Using SPC (Statistical Process Control) not only helps to predict the trend in manufacturing of parts but also minimises the human error in measurement. Gauge R&R (Repeatability and Reproducibility) study identifies problems in measurement systems. Measurement is like any other process in terms of variability. Reducing this variation via an automated machine probing system helps to avoid defects in future products.Developments in aerospace, nuclear, oil and gas industries demand materials with high performance and high temperature resistance under corrosive and oxidising environments. Superalloys were developed in the latter half of the 20th century as high strength materials for such purposes. For the same characteristics superalloys are considered as difficult-to-cut alloys when it comes to formation and machining. Furthermore due to the sensitivity of superalloy applications, in many cases they should be manufactured with tight tolerances. In addition superalloys, specifically Nickel based, have unique features such as low thermal conductivity due to having a high amount of Nickel in their material composition. This causes a high surface temperature on the work-piece at the machining stage which leads to deformation in the final product.Like every process, the material variations have a significant impact on machining quality. The main cause of variations can originate from chemical composition and mechanical hardness. The non-uniform distribution of metal elements is a major source of variation in metallurgical structures. Different heat treatment standards are designed for processing the material to the desired hardness levels based on application. In order to take corrective actions, a study on the material aspects of superalloys has been conducted. In this study samples from different batches of material have been analysed. This involved material preparation for microscopy analysis, and the effect of chemical compositions on hardness (before and after heat treatment). Some of the results are discussed and presented in this paper.

Entropy Based Approach to Finding Interacting Genes Responsible for Complex Human Disease

2000 Mathematics Subject Classification: 62P10, 92D10, 92D30, 94A17, 62L10.

Application of Statistical Experimental Design in Food Sciences

The development of new, health supporting food of high quality and the optimization of food technological processes today require the application of statistical methods of experimental design. The principles and steps of statistical planning and evaluation of experiments will be explained. By example of the development of a gluten-free rusk (zwieback), which is enriched by roughage compounds the application of a simplex-centroid mixture design will be shown. The results will be illustrated by different graphics.

Multiple Dipole Source Models for Scalp-Recorded Event-Related Potentials: Example from Complex Visual Processing in the Human Brain

2000 Mathematics Subject Classification: 62P10, 92C20