Violência e projetos de vida em conflitos pela posse da terra

Neste artigo, apoiados em referenciais empíricos retirados das lutas pela posse da terra, sugerimos que, como instrumento, a violência parece ser caracterizada pelo fato de ser uma forma especial de lidar com a questão da anomia. Isso admitido, propomos que os mecanismos de produção e de reprodução da violência são mecanismos de produção e de reprodução da heteronomia da vontade. É o que nos coloca a importância de uma discussão sobre os projetos de vida.

Influence of seasonal changes in daily activity and annual life cycle of Geotrigona mombuca (Hymenoptera, Apidae) in a Cerrado habitat, São Paulo, Brazil

The foraging activity of Geotrigona mombuca Smith, 1863 was studied under natural conditions aiming to verify the influence of seasonal changes on daily flight activity and annual cycle of the colony. Daily flight activity was monitored for a year based on the observation and counting of foragers leaving and entering the hive, as well as the kind of material transported and meteorological factors such as day time, temperature and relative humidity. The influence of seasonal changes was evidenced by alterations on daily rhythm of flight activity and by differences on transportation of food resources, building material and garbage. These data indicate that forager behavior is related to daily microclimate conditions and it is synchronized with the requirements of colony annual cycle, which determines an intense pollen collection in the summer. Thus, the recomposition of the intranidal population in spring and summer can be ensured, which is characterized both for a higher intensity of flight activity and increase in garbage and resin transport, as well as the swarming process in the spring. In this way, an action targeting the preservation or management of the species in a natural environment should consider that survival and reproduction of the colony depends greatly on the amount of available pollen in late winter.

Development of pachycoris torridus (hemiptera: scutelleridae) on jatropha curcas (euphorbiaceae), psidium cattleianum (myrtaceae) and aleurites fordii (euphorbiaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Quantitative genetic study of age at subsequent rebreeding in Nellore cattle by using survival analysis

The continuous trait age at subsequent rebreeding (ASR) was evaluated using survival analysis in Nellore breed cows that conceived for the first time at approximately 14 months of age. This methodology was chosen because the restricted breeding season produces censored data. The dataset contained 2885 records of ASR (in days). Records of females that did not produce calves in the following year after being exposed to a sire were considered censored (48.3% of the total). The statistical model used was a Weibull mixed survival model, which included fixed effects of contemporary groups (CG) and period and a random effect of individual animal. The effect of contemporary groups on ASR was significant (P < 0.01). Heritabilities obtained for ASR were 0.03 and 0.04 in logarithmic and original scales, respectively. These results indicate that the genetic selection response for subsequent reproduction of 2-year-old Nellore breed females is not expected to be effective based on survival analysis. Furthermore, these results suggest that environmental improvement is fundamental to this important trait. It should be highlighted that an increase in the average date of birth can produce an adverse effect in the future, since this cannot be compensated by genetic improvement.

Wolf presence in the ranch of origin: Impacts on temperament and physiological responses of beef cattle following a simulated wolf encounter

This experiment evaluated temperament, vaginal temperature, and plasma cortisol in beef cows from wolf-naive and wolf-experienced origins that were subjected to a simulated wolf encounter. Multiparous, pregnant, nonlactating Angus-crossbreed cows from the Eastern Oregon Agricultural Research Center located near Burns, OR (CON; n = 50), and from a commercial operation near Council, ID (WLF; n = 50), were used. To date, grey wolves are not present around Burns, OR, and thus CON were naive to wolves. Conversely, wolves are present around Council, ID, and WLF cows were selected from a herd that had experienced multiple confirmed wolf-predation episodes from 2008 to 2012. Following a 50-d commingling and adaptation period, CON and WLF cows were ranked by temperament, BW, and BCS and allocated to 5 groups (d 0; 10 CON and 10 WLF cows/group). Groups were individually subjected to the experimental procedures on d 2 (n = 3) and d 3 (n = 2). Before the simulated wolf encounter, cow temperament was assessed and blood samples and vaginal temperatures (using intravaginal data loggers) were collected (presimulation assessments). Cows were then sorted by origin, moved to 2 adjacent drylot pens (10 WLF and 10 CON cows/pen), and subjected to a simulated wolf encounter event for 20 min, which consisted of 1) cotton plugs saturated with wolf urine attached to the drylot fence, 2) continuous reproduction of wolf howls, and 3) 3 leashed dogs that were walked along the fence perimeter. Thereafter, WLF and CON cows were commingled and returned to the handling facility for postsimulation assessments, which were conducted immediately after exposure to wolf-urine-saturated cotton plugs, wolf howl reproduction, and 20-s exposure to the 3 dogs while being restrained in a squeeze chute. Chute score, temperament score, and plasma cortisol concentration increased (P <= 0.01) from pre- to postsimulation assessment in WLF but did not change in CON cows (P >= 0.19). Exit velocity decreased (P = 0.01) from pre-to postsimulation assessment in CON but did not change (P = 0.79) in WLF cows. In addition, WLF cows had a greater (P = 0.03) increase in temperature from pre-to postsimulation assessments compared with CON cows. In conclusion, the simulated wolf encounter increased excitability and fear-related physiological stress responses in cows that originated from a wolf-experienced herd but not in cows that originated from a wolf-naive herd.

Development of a Methodology and Evaluation of Pesticides Against Aceria litchii and Its Predator Phytoseius intermedius (Acari: Eriophyidae, Phytoseiidae)

The litchi erineum mite, Aceria litchii (Keifer), is the major pest of litchi, Litchi chinensis Sonnerat (Sapindaceae). This study evaluated the effect of 11 pesticides on the survival of A. litchii as well as on the survival and reproduction of Phytoseius intermedius Evans& McFarlane, the predator most found in association with it in Brazil. The containment of A. litchii in small petri dishes whose bottoms were covered with a solidified paste made of a mixture of gypsum and activated charcoal (9: 1 in volume), kept humid, was shown to be adequate for this type of study. For the evaluation of the effect of pesticides on A. litchii, mites leaving the erinia from the pieces of litchi leaves (removed from the plants approximate to 24 h earlier) were sprayed under a Potter tower and immediately transferred to the 2.5-cm-diameter petri dishes. After 2, 12, 24, and 48 h of the application, the dishes were examined to evaluate the mite survival. The four pesticides causing the highest levels A. litchii mortality, as well as azadirachtin, were tested for the effect on P. intermedius. For this test, experimental units consisted of discs of uninfested litchi leaves also sprayed under a Potter tower before introducing the predators. Survival and oviposition of the predator were evaluated every 24 h for 5 consecutive days; viability of the eggs laid was also evaluated. Highest mortality of A. litchii occurred with the application of fenpyroximate, sulfur, abamectin, and hexythiazox. Azadirachtin was considered moderately harmful to the predator P. intermedius, whereas other pesticides were classified as harmful. Despite the low efficiency of azadirachtin in the control of the pest, its relative selectivity to P. intermedius would encourage the evaluation on field condition, especially for use in organic production systems.

Anthropogenic edges, isolation and the flowering time and fruit set of Anadenanthera peregrina, a cerrado savanna tree

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Seasonal changes in the prostatic complex of Artibeus planirostris (Chiroptera: Phyllostomidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Density of Trichospilus diatraeae (Hymenoptera: Eulophidae) Parasitizing Diaphania hyalinata (Lepidoptera: Crambidae) Pupae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Low abundance of long-tongued pollinators leads to pollen limitation in four specialized hawkmoth-pollinated plants in the Atlantic Rain forest, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological effects of bacterial compounds on the testes of Eupemphix nattereri (Anura)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

COMPARISON BETWEEN MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ALLOY TI-6AL4V, COLD WORK VERSUS PROTOTIPES BY DIRECT METAL LASER SINTERING

The present work aims to study the microstructure and mechanical properties of titanium alloys, widely used in the manufacture of orthopedic implants in order to compare a new manufacturing technology of implants, rapid prototyping in metals with conventional manufacturing processes. Rapid prototyping is being used in many areas of human knowledge to assist in the study and often in the manufacture of components for their own use. Nowadays with the advancement of software and equipment such as computed tomography and magnetic resonance imaging, we can reproduce any part of the human body in three-dimensional images with great perfection and it is used in the reproduction of implants, scaffolds, material aid and preparation in surgery. This work aims to do: A comparison between the microstructure of the alloy in the two manufacturing processes (prototyping and conventional), showing the grain size, the nature, form, quantity, and distribution of various ingredients or certain inclusions and study of mechanical properties of titanium in both cases.

Microscopic Evidence of the Opportunistic Reproductive Strategy and Early Sexual Maturation of the Small-Sized Characin Knodus moenkhausii (Characidae, Pisces)

We investigated the reproductive biology of Knodus moenkhausii, an abundantsmall-sized characin fish with broad occurrence in the Parana River basin, Bra-zil. Specimens were collected monthly to determine fecundity, length at firstmaturity, reproductive period and spawning type. Gonads were macroscopically classified according to their form, size and texture in three different stages(immature, maturing or mature). Histological procedures were conducted toconfirm gonadal developmental stages, and it was possible to notice thatmaturing females actually presented atretic oocytes, and all males that weremacroscopically classified as immature, maturing and mature actually presentedabundant spermatozoa in their gonads. Because of these discrepancies, a reclas-sification of gonadal maturations stages was needed after histological analysis,reinforcing its importance to studies on the reproduction of small characins.Reproduction occurred throughout the year though with two peaks. The lengthof the smallest mature individuals was 13 mm SL for males and 24 mm SL for females. Despite presenting relatively small batch fecundity, some life historytraits such as early reproduction, multiple spawning throughout the year, inassociation with known opportunistic feeding habits, explain the high abun-dance of this species in locations where it occurs.

Ensino de ciências no 5º ano do ensino fundamental: o currículo modelado e aspectos do currículo em ação

Pós-graduação em Educação Escolar - FCLAR

Finite element analysis of the influence of geometry and design of zirconia crowns on stress distribution

Purpose: To evaluate the influence of the geometry and design of prosthetic crown preparations on stress distribution in compression tests, using finite element analysis (FEA). Materials and Methods: Six combinations of 3D drawings of all-ceramic crowns (yttria-stabilized zirconia framework and porcelain veneer) were evaluated: F, flat preparation and simplified crown; FC, flat preparation and crown with contact point; FCM, flat preparation and modified crown; A, anatomical preparation and simplified anatomical crown framework; AC, anatomical preparation and crown with contact point; and ACM, anatomical preparation and modified crown. Bonded contact types at all interfaces with the mesh were assigned, and the material properties used were according to the literature. A 200 N vertical load was applied at the center of each model. The maximum principal stresses were quantitatively and qualitatively analyzed. Results: The highest values of tensile stress were observed at the interface between the ceramics in the region under the load application for the simplified models (F and A). Reductions in stress values were observed for the model with the anatomical preparation and modified infrastructure (ACM). The stress distribution in the flat models was similar to that of their respective anatomical models. Conclusions: The modified design of the zirconia coping reduces the stress concentration at the interface with the veneer ceramic, and the simplified preparation can exert a stress distribution similar to that of the anatomical preparation at and near the load point, when load is applied to the center of the crown.