Optimal periodic preventive maintenance policy for leased equipment

For leased equipment the lessor incurs penalty costs for failures occurring over the lease period and for not rectifying such failures within a specified time limit. Through preventive maintenance actions the penalty costs can be reduced but this is achieved at the expense of increased maintenance costs. The paper looks at a periodic preventive maintenance policy which achieves a tradeoff between the penalty and maintenance costs. (c) 2005 Elsevier Ltd. All rights reserved.

Optimal preventive maintenance of leased equipment with corrective minimal repairs

For leased equipment, the lessor carries out the maintenance of the equipment. Usually, the contract of lease specifies the penalty for equipment failures and for repairs not being carried out within specified time limits. This implies that optimal preventive maintenance policies must take these penalty costs into account and properly traded against the cost of preventive maintenance actions. The costs associated with failures are high as unplanned corrective maintenance actions are costly and the resulting penalties due to lease contract terms being violated. The paper develops a model to determine the optimal parameters of a preventive maintenance policy that takes into account all these costs to minimize the total expected cost to the lessor for new item lease. The parameters of the policy are (i) the number of preventive maintenance actions to be carried out over the lease period, (ii) the time instants for such actions, and (iii) the level of action. (c) 2005 Elsevier B.V. All rights reserved.

The cross-entropy method for continuous multi-extremal optimization

In recent years, the cross-entropy method has been successfully applied to a wide range of discrete optimization tasks. In this paper we consider the cross-entropy method in the context of continuous optimization. We demonstrate the effectiveness of the cross-entropy method for solving difficult continuous multi-extremal optimization problems, including those with non-linear constraints.

Maintenance Strategies for used equipment under lease

Abstract: Purpose – The aim of this research is to determine the optimal upgrade and preventive maintenance actions that minimize the total expected cost (maintenance costs+penalty costs). Design/methodology/approach – The problem is a four-parameter optimization with two parameters being k-dimensional. The optimal solution is obtained by using a four-stage approach where at each stage a one-parameter optimization is solved. Findings – Upgrading action is an extra option before the lease of used equipment, in addition to preventive maintenance action. Upgrading action makes equipment younger and preventive maintenance action lowers the ROCOF. Practical implications – There is a growing trend towards leasing equipment rather than owning it. The lease contract contains penalties if the equipment fails often and repairs are done within reasonable time period. This implies that the lessor needs to look at optimal preventive maintenance strategies in the case of new equipment lease, and upgrade actions plus preventive maintenance in the case of used equipment lease. The paper deals with this topic and is of great significant to business involved with leasing equipment. Originality/value – Nowadays many organizations are interested in leasing equipment and outsourcing maintenance. The model in this paper addresses the preventive maintenance problem for leased equipment. It provides an approach to dealing with this problem.

Light alloy castings for automotive applications: The case of Al vs Mg

The economical and environmental effects of mass reduction through Al and Mg primary alloys substitutions for cast iron and steel in automotive components are discussed using MF. Ashby's penalty functions method The viability of Mg alloy substitutions for existing Al alloy cast components is also considered. The cost analysis shows that direct, equal-volume, Al alloy substitutions for cast iron and steel are the most feasible in terms of the CAFE liability, followed by substitutions involving flat panels of prescribed stiffness. When the creation of CO2 associated to the production of Al and Mg is considered, the potential gasoline savings over the lifespan of the car compensate for the intrinsic environmental burden of Al in all applications, while electrolytic Mg substitutions for cast iron and steel are feasible for equal volume and panels only. Magnesium produced by the Pidgeon thermal process appears to be too primary energy intensive to be competitive in structural applications. Magnesium substitutions for existing Al alloy beams and panels are generally unviable. The current higher recycling efficiency of Al casting alloys confers Al a significant advantage over Mg alloys.

Unsafe driving behaviour and four wheel drive vehicles: observational study

Objective To assess the level of compliance with the new law in the United Kingdom mandating penalties for rising a hand held mobile phone while driving, to compare compliance with this law with the one on the use of seat belts, and to compare compliance with these laws between drivers of four wheel drive vehicles and drivers of normal cars. Design Observational study with two phases-one within the grace period, the other starting one week after penalties were imposed on drivers using such telephones. Setting Three busy sites in London. Participants Drivers of 38 182 normal cars and 2944 four wheel drive vehicles. Main outcome measures Proportions of drivers seen to be using hand held mobile phones and not using seat belts. Results Drivers of four wheel drive vehicles were more likely than drivers of other cars to be seen using hand held mobile phones (8.2% v 2.0%) and not complying with the law on seat belts (19.5% v 15.0%). Levels of non-compliance with both laws were slightly higher in the penalty phase of observation, and breaking one law was associated with increased likelihood of breaking the other. Conclusions The level of non-compliance with the law on the use of hand held mobile phones by drivers in London is high, as is non-compliance with the law on seat belts. Drivers of four wheel drive vehicles were four times more likely than drivers of other cars to be seen using hand held mobile phones and slightly more likely not to comply with the law on seat belts.

VALORAÇÃO DE ATIVOS E MULTAS AMBIENTAIS: ANÁLISE SIMULADA DE EMPREENDIMENTOS HOTELEIROS EM ÁREAS PROTEGIDAS

O crescimento desordenado e a ausência de políticas públicas mais eficientes levaram a uma diversificação quanto ao uso dos recursos naturais, principalmente no que se refere à água para o saneamento básico. O marco regulatório estabelecido na década de 1980 registrou as políticas públicas para o meio ambiente, que trouxeram avanços sobre o tema, desencadeando uma série de ações voltadas tanto para a estrutura burocrática e da prevenção, quanto solução para os problemas de degradação e esgotamento dos recursos naturais. Com o advento das leis específicas de proteção aos mananciais e mediante a lei 13.579/09 do Estado de São Paulo que trata sobre a área da Billings, percebeu-se um avanço na questão do gerenciamento para proteção e desenvolvimento de acordo com as características da região. Instrumentos de políticas públicas para conter as ações referentes aos danos causados ao meio ambiente, como a lei contra crimes ambientais foram às ações práticas do Estado para conter tais ações. O Objetivo desta pesquisa é analisar as possíveis discrepâncias entre as penalidades financeiras aplicadas na ocorrência das infrações ambientais e os modelos de valoração dos ativos ambientais, utilizando a simulação de implantação de um hotel em áreas de proteção e recuperação de manancial no Município de São Bernardo do Campo no Estado de São Paulo. O desenvolvimento da pesquisa se baseou no método de custo de reposição (MCR) para dimensionar os possíveis impactos gerados por um empreendimento hoteleiro e seu respectivo valor econômico. Posteriormente, os impactos ambientais foram relacionados com a legislação do município para determinar os valores das possíveis penalidades aplicáveis ao dano causado. Dentre os resultados levantados, verificou-se uma significativa discrepância entre a valoração econômica e as multas aplicáveis, sendo que nos impactos referentes a impermeabilidade do solo e contaminação do lençol freático, com diferenças superiores em relação às penalidades de R$ 804.922,78 e R$ 453.333,33 respectivamente. A partir da metodologia aplicada na pesquisa, observou-se que as penalidades incidentes em casos de danos ao meio ambiente, muitas vezes não atinge o objetivo, que é inibir a ação do infrator, pois o real custo econômico não é medido na aplicação do valor da multa.

A TRIBO DE ISSACAR Uma tribo de assalariados

Esse trabalho bibliográfico traz como tema a tribo de Issacar. Ela faz parte da formação do sistema tribal de Israel, pelo menos no seu início, e tem como principal característica a vida dura de homem trabalhador, como tantos na história da humanidade, mas que dentro da sociedade tribal de Israel se diferenciou por ter aberto mão da possibilidade de viver livre da dominação egípcia/cananéia por encontrar em uma região difícil, um local que lhe parecesse ser de segurança e satisfação. O paraíso que, em contrapartida, lhe exigiu muito trabalho e suor e por conta disso acabou por batizá-lo com o curioso nome de Issacar o homem assalariado. Não foi fácil sua decisão de não passar a vida lutando contra os seus opressores, mas inserido em seu meio, ganhar sua vida e seu pão. A História de Israel, longe de ser repetitiva e já determinada, é intrigante e fascinante justamente pelas possibilidades de descoberta, na vida de seu povo a novidade empolgante de vida que o Deus da vida quer oferecer a quem souber viver. Trabalho não é castigo, trabalho é bênção, trabalho é sagrado e alimenta de horizontes o tempo acordado de viver. Apoiado nos textos de Js19,17-23, Gn 49,14-15 e Dt 33,18-19 vamos descobrir a ousadia de um grupo de pessoas que resolve fazer diferente, vivendo em uma região pouco atrativa geograficamente, essas pessoas fazem da sua força de trabalho a ferramenta que lhes garante estar onde querem, fazendo o que querem. Esse é Issacar.

Combining the power of online crowdsourcing with creative writing user interfaces

The goal of this work was to provide professional and amateur writers with a new way of enhancing their productivity and mental well-being, by helping them overcoming writers block and being able to achieve a state of optimal experience while writing. Our approach is based on bringing together different components to create what we call a creative moment. A creative moment is composed by an image, a text, a mood, a location and a color. The color presented in the creative moment varied according to the mood that was associated to the creative moment. With the creative moments we hoped that our users could have a way to easily trigger their creativity and have a kick start in their work. The prototyping of a web crowdsourcing platform, named CreativeWall, and a Microsoft Word Add-In, that was used on the user study performed, is described and their implementations are discussed. The user study reveals that our approach does have a positive influence in the productivity of the participants when compared with another existing approach. The study also revealed that our approach can ease the process of achieving a state of optimal experience by enhancing one of the dimensions presented on the Flow Theory. At the end we present what we consider would be some possible future developments for the concept created during the development of this work.

Analysis and optimisation of the performance of nonlinear optical communication systems

We investigate the feasibility of simultaneous suppressing of the amplification noise and nonlinearity, representing the most fundamental limiting factors in modern optical communication. To accomplish this task we developed a general design optimisation technique, based on concepts of noise and nonlinearity management. We demonstrate the immense efficiency of the novel approach by applying it to a design optimisation of transmission lines with periodic dispersion compensation using Raman and hybrid Raman-EDFA amplification. Moreover, we showed, using nonlinearity management considerations, that the optimal performance in high bit-rate dispersion managed fibre systems with hybrid amplification is achieved for a certain amplifier spacing – which is different from commonly known optimal noise performance corresponding to fully distributed amplification. Required for an accurate estimation of the bit error rate, the complete knowledge of signal statistics is crucial for modern transmission links with strong inherent nonlinearity. Therefore, we implemented the advanced multicanonical Monte Carlo (MMC) method, acknowledged for its efficiency in estimating distribution tails. We have accurately computed acknowledged for its efficiency in estimating distribution tails. We have accurately computed marginal probability density functions for soliton parameters, by numerical modelling of Fokker-Plank equation applying the MMC simulation technique. Moreover, applying a powerful MMC method we have studied the BER penalty caused by deviations from the optimal decision level in systems employing in-line 2R optical regeneration. We have demonstrated that in such systems the analytical linear approximation that makes a better fit in the central part of the regenerator nonlinear transfer function produces more accurate approximation of the BER and BER penalty. We present a statistical analysis of RZ-DPSK optical signal at direct detection receiver with Mach-Zehnder interferometer demodulation

Finite element analysis of the statics of and vibrations in axisymmetric shells

The finite element process is now used almost routinely as a tool of engineering analysis. From early days, a significant effort has been devoted to developing simple, cost effective elements which adequately fulfill accuracy requirements. In this thesis we describe the development and application of one of the simplest elements available for the statics and dynamics of axisymmetric shells . A semi analytic truncated cone stiffness element has been formulated and implemented in a computer code: it has two nodes with five degrees of freedom at each node, circumferential variations in displacement field are described in terms of trigonometric series, transverse shear is accommodated by means of a penalty function and rotary inertia is allowed for. The element has been tested in a variety of applications in the statics and dynamics of axisymmetric shells subjected to a variety of boundary conditions. Good results have been obtained for thin and thick shell cases .

Numerical and statistical analysis of long-haul undersea optical communication systems

Firstly, we numerically model a practical 20 Gb/s undersea configuration employing the Return-to-Zero Differential Phase Shift Keying data format. The modelling is completed using the Split-Step Fourier Method to solve the Generalised Nonlinear Schrdinger Equation. We optimise the dispersion map and per-channel launch power of these channels and investigate how the choice of pre/post compensation can influence the performance. After obtaining these optimal configurations, we investigate the Bit Error Rate estimation of these systems and we see that estimation based on Gaussian electrical current systems is appropriate for systems of this type, indicating quasi-linear behaviour. The introduction of narrower pulses due to the deployment of quasi-linear transmission decreases the tolerance to chromatic dispersion and intra-channel nonlinearity. We used tools from Mathematical Statistics to study the behaviour of these channels in order to develop new methods to estimate Bit Error Rate. In the final section, we consider the estimation of Eye Closure Penalty, a popular measure of signal distortion. Using a numerical example and assuming the symmetry of eye closure, we see that we can simply estimate Eye Closure Penalty using Gaussian statistics. We also see that the statistics of the logical ones dominates the statistics of the logical ones dominates the statistics of signal distortion in the case of Return-to-Zero On-Off Keying configurations.

Interviewing strategies in the face of beauty:a psychophysiological investigation into the job negotiation process

After the application form is submitted, the interview is the most important method of human resource allocation. Previous research has shown that the attractiveness of interviewees can significantly bias interview outcome. We have previously shown that female interviewers give attractive male interviewees higher status job packages compared their average looking counterparts. However, it is not known whether male interviewers exhibit such biases. In the present study, participants were asked to take part in a mock job negotiation scenario where they had to allocate either a high- or low-status job package to attractive or average looking ``interviewees.'' Before each decision was made, the participant's anticipatory electrodermal response (EDR) was recorded. The results supported our previous finding in that female participants allocated a greater number of high-status job packages to attractive men. Additionally, male participants uniformly allocated a greater number of low-status job packages to both attractive men and attractive women. Overall, the average looking interviewees incurred a penalty and received a significantly greater number of low-status job packages. In general, the EDR profile for both male and female participants was significantly greater when allocating the low-status packages to the average looking interviewees. However, the male anticipatory EDR profile showed the greatest change when allocating attractive women with low-status job packages. We discuss these findings in terms of the potential biases that may occur at the job interview and place them within an evolutionary psychology framework.

Noise characterization and transmission evaluation of unrepeated Raman amplified DP-16QAM link

Impairments characterization and performance evaluation of Raman amplified unrepeated DP-16QAM transmissions are conducted. Experimental results indicate that small gain in forward direction enhance the system signal-to-noise ratio for longer reach without introducing noticeable penalty.