985 resultados para Partial identification
Resumo:
The properties of Co4Sb12 with various In additions were studied. X-ray diffraction revealed the presence of the pure δ-phase of In0.16Co4Sb12, whereas impurity phases (γ-CoSb2 and InSb) appeared for x = 0.25, 0.40, 0.80, and 1.20. The homogeneity and morphology of the samples were observed by Seebeck microprobe and scanning electron microscopy, respectively. All the quenched ingots from which the studied samples were cut were inhomogeneous in the axial direction. The temperature dependence of the Seebeck coefficient (S), electrical conductivity (σ), and thermal conductivity (κ) was measured from room temperature up to 673 K. The Seebeck coefficient of all In-added Co4Sb12 materials was negative. When the filler concentration increases, the Seebeck coefficient decreases. The samples with In additions above the filling limit (x = 0.22) show an even lower Seebeck coefficient due to the formation of secondary phases: InSb and CoSb2. The temperature variation of the electrical conductivity is semiconductor-like. The thermal conductivity of all the samples decreases with temperature. The central region of the In0.4Co4Sb12 ingot shows the lowest thermal conductivity, probably due to the combined effect of (a) rattling due to maximum filling and (b) the presence of a small amount of fine-dispersed secondary phases at the grain boundaries. Thus, regardless of the non-single-phase morphology, a promising ZT (S 2 σT/κ) value of 0.96 at 673 K has been obtained with an In addition above the filling limit.
Resumo:
Photograph from Nazi identification card, dated February 24, 193?.
Resumo:
Haemophilus parasuis is the causative agent of Glässer's disease. Up to now 15 serovars of H. parasuis have been identified, with significant differences existing in virulence between serovars. In this study, suppression subtractive hybridization (SSH) was used to identify the genetic difference between Nagasaki (H. parasuis serovar 5 reference strain, highly virulent) and SW114 (H. parasuis serovar 3 reference strain, non-virulent). A total of 191 clones were obtained from the SSH library. Using dot hybridization and PCR, 15 clones were identified containing fragments that were present in the Nagasaki genome while absent in the SW114 genome. Among these 15 fragments, three fragments (ssh1, ssh13, ssh15) encode cell surface-associated components; three fragments (ssh2, ssh5, ssh9) are associated with metabolism and stress response; one fragment (ssh8) is involved in assembly of fimbria and one fragment (ssh6) is a phage phi-105 ORF25-like protein. The remaining seven fragments are hypothetical proteins or unknown. Based on PCR analysis of the 15 serovar reference strains, eight fragments (ssh1, ssh2, ssh3, ssh6, ssh8, ssh10, ssh11 and ssh12) were found in three to five of most virulent serovars (1, 5, 10, 12, 13 and 14), zero to two in three moderately virulent serovars (2, 4 and 15), but absent in the low virulent serovar (8) and non-virulent serovars (3, 6, 7, 9 and 11). In vivo transcription fragments ssh1, ssh2, ssh8 and ssh12 were identified in total RNA samples extracted from experimental infected pig lung by RT-PCR. This study has provided some evidence of genetic differences between H. parasuis strains of different virulence.
Resumo:
Quambalaria spp. include serious plant pathogens, causing leaf and shoot blight of Corymbia and Eucalyptus spp. In this study, a disease resembling Quambalaria leaf blight was observed on young Corymbia citriodora trees in a plantation in the Guangdong Province of China. Comparisons of rDNA sequence data showed that the causal agent of the disease is Q. pitereka. This study provides the first report of Quambalaria leaf blight from China, and it is also the first time that this pathogen has been found on trees outside the native range of Eucalypts.
Resumo:
Accurate and confident identification of the insects, spiders and mites in vegetable crops is the first step towards successful management of pests and natural enemies. It is an essential prerequisite for crop monitoring, which is the backbone of an effective pest management program. This workshop manual and trainer's handbook were compiled as part of an insect, spider and mite identification program for Australian vegetable growers. The workshop training is designed to help growers to: • know how to collect and preserve insects for identification • be able to classify most common insects (particularly those of horticultural significance) into broad groups • appreciate the importance of these groups in pest, predator and parasite identification and management • collect and classify some insect pests, predators and parasites of horticultural importance.
Resumo:
Sheep liver 5,10-methylenetetrahydrofolate reductase was subjected to specific chemical modification with phenylglyoxal, diethyl pyrocarbonate and N-bromosuccinimide. The second-order rate constants for inactivation were calculated to be 54 M-1 X min-1, 103 M-1 X min-1 and 154 M-1 X min-1 respectively. This inactivation could be prevented by incubation with substrates or products, suggesting that the residues modified, namely arginine, histidine and tryptophan, are essential for enzyme activity.
Resumo:
The trainers manual provides workshop plans and sample slides for trainers wishing to conduct the 'Identification of insects, spiders and mites in vegetable crops' workshop.
Resumo:
Several species of oysters, clams and mussels are currently being used around the world to create extra profits and help remediate waste-waters from mariculture operations. To identify opportunities and potentially suitable species of bivalves for remediation of prawn farm effluent in Australia, recent literature dealing with bivalve filtration is reviewed, and species occurring naturally in a banana prawn, Penaeus (Fenneropenaeus) merguiensis, grow-out pond and effluent streams at the Bribie Island Aquaculture Research Centre (BIARC) were collected, identified and assessed in terms of their tolerance of high silt loadings over 3 months. Three bivalve species predominated in the BIARC case study. These were the mud ark, Anadara trapezia, the rock oyster, Dendostrea folium, and the pearl shell, Pinctada maculata. The mud ark demonstrated the highest tolerance of silt loading (99% survival), followed by pearl shells and rock oysters (88 and 63% survival respectively).
Resumo:
The genus Actinomyces consists of a heterogeneous group of gram-positive, mainly facultatively anaerobic or microaerobic rods showing various degrees of branching. In the oral cavity, streptococci and Actinomyces form a fundamental component of the indigenous microbiota, being among initial colonizers in polymicrobial biofilms. The significance of the genus Actinomyces is based on the capability of species to adhere to surfaces such as on teeth and to co-aggregate with other bacteria. Identification of Actinomyces species has mainly been based on only a few biochemical characteristics, such as pigmentation and catalase production, or on the use of a single commercial kit. The limited identification of oral Actinomyces isolates to species level has hampered knowledge of their role both in health and disease. In recent years, Actinomyces and related organisms have attracted the attention of clinical microbiologists because of a growing awareness of their presence in clinical specimens and their association with disease. This series of studies aimed to amplify the identification methods for Actinomyces species. With the newly developed identification scheme, the age-related occurrence of Actinomyces in healthy mouths of infants and their distribution in failed dental implants was investigated. Adhesion of Actinomyces species to titanium surfaces processed in various ways was studied in vitro. The results of phenotypic identification methods indicated a relatively low applicability of commercially available test kits for reliable identification within the genus Actinomyces. However, in the study of conventional phenotypic methods, it was possible to develop an identification scheme that resulted in accurate differentiation of Actinomyces and closely related species, using various different test methods. Genotypic methods based on 16S rRNA sequence analysis of Actinomyces proved to be a useful method for genus level identification and further clarified the species level identification with phenotypic methods. The results of the study of infants showed that the isolation frequency of salivary Actinomyces species increased according to age: thirty-one percent of the infants at 2 months but 97% at 2 years of age were positive for Actinomyces. A. odontolyticus was the most prominent Actinomyces colonizer during the study period followed in frequency by A. naeslundii and A. viscosus. In the study of explanted dental implants, Actinomyces was the most prevalent bacterial genus, colonizing 94% of the fixtures. Also in the implants A. odontolyticus was revealed as the most common Actinomyces species. It was present in 84% of Actinomyces -positive fixtures followed in frequency by A. naeslundii, A. viscosus and A. israelii. In an in vitro study of titanium surfaces, different Actinomyces species showed variation regarding their adhesion to titanium. Surface roughness as well as albumin coating of titanium had significant effects on adhesion. The use of improved phenotypic and molecular diagnostic methods increased the accuracy of the identification of the Actinomyces to species level. This facilitated an investigation of their occurrence and distribution in oral specimens in both health and disease.
Resumo:
Walter Reiss, 1908-1937
Resumo:
Background: The hot dog fold has been found in more than sixty proteins since the first report of its existence about a decade ago. The fold appears to have a strong association with fatty acid biosynthesis, its regulation and metabolism, as the proteins with this fold are predominantly coenzyme A-binding enzymes with a variety of substrates located at their active sites. Results: We have analyzed the structural features and sequences of proteins having the hot dog fold. This study reveals that though the basic architecture of the fold is well conserved in these proteins, significant differences exist in their sequence, nature of substrate and oligomerization. Segments with certain conserved sequence motifs seem to play crucial structural and functional roles in various classes of these proteins. Conclusion: The analysis led to predictions regarding the functional classification and identification of possible catalytic residues of a number of hot dog fold-containing hypothetical proteins whose structures were determined in high throughput structural genomics projects.
Resumo:
Plasmodium falciparum TIM (PfTIM) is unique in possessing a Phe residue at position 96 in place of the conserved Ser that is found in TIMs from the majority of other organisms. In order to probe the role of residue 96, three PfTIM mutants, F96S, F96H and F96W, have been biochemically and structurally characterized. The three mutants exhibited reduced catalytic efficiency and a decrease in substrate-binding affinity, with the most pronounced effects being observed for F96S and F96H. The k(cat) values and K-m values are (2.54 +/- 0.19) x 10(5) min(-1) and 0.39 +/- 0.049 mM, respectively, for the wild type; (3.72 +/- 0.28) x 10(3) min(-1) and 2.18 +/- 0.028 mM, respectively, for the F96S mutant;(1.11 +/- 0.03) x 10(4) min(-1) and 2.62 +/- 0.042 mM, respectively, for the F96H mutant; and (1.48 +/- 0.05) x 10(5) min(-1) and 1.20 +/- 0.056 mM, respectively, for the F96W mutant. Unliganded and 3-phosphoglycerate (3PG) complexed structures are reported for the wild-type enzyme and the mutants. The ligand binds to the active sites of the wild-type enzyme (wtPfTIM) and the F96W mutant, with a loop-open state in the former and both open and closed states in the latter. In contrast, no density for the ligand could be detected at the active sites of the F96S and F96H mutants under identical conditions. The decrease in ligand affinity could be a consequence of differences in the water network connecting residue 96 to Ser73 in the vicinity of the active site. Soaking of crystals of wtPfTIM and the F96S and F96H mutants resulted in the binding of 3PG at a dimer-interface site. In addition, loop closure at the liganded active site was observed for wtPfTIM. The dimer-interface site in PfTIM shows strong electrostatic anchoring of the phosphate group involving the Arg98 and Lys112 residues of PfTIM.
Resumo:
Microsomal b-type hemoprotein designated, cytochrome b555 of C-Roseus seedlings was solubilized using detergents and purified by a combination of ion exchange chromatography and gel filtration to a specific content of 18.5 nmol per mg of protein. The purified cytochrome b555 was homogeneous and estimated to have an apparent molecular weight of 16500 on SDS-PAGE. The absorption spectrum of the reduced form has major peaks at 424, 525 and 555 nm. The α-band of the reduced form is asymmetric with a pronounced shoulder at 559 nm. The spectrum of the pyridine ferrohemochrome shows absorption peaks at 557, 524 and 418 nm indicating that the cytochrome has protoheme prosthetic group. The purified cytochrome is autoxidizable and does not combine with carbon monoxide, azide or cyanide. It is reducible by NADH in the presence of NADH-cytochrome b555 reductase partially purified from C-Roseus microsomes.
Resumo:
The purpose of this report is to present the final results of all activities conducted under HAL Project VG05053 ‘Virus identification and development of long-term management strategies for the rhubarb industry’. The report provides a summary of project findings, a description of technology transfer activities, and recommendations arising from the outcomes of the project. The overall objective of this project was to devise a strategy for the control of rhubarb decline disease through 1) knowledge of the viruses present and their epidemiology, 2) production of virus-free planting material via tissue culture, and 3) formation of a national grower group to represent industry.