Scientific output trends in oral health in Brazil

Objective. To describe dental research trends in Brazil (especially population-based oral health) in the early Twenty-first Century. Methods. The abstracts of studies presented at meetings of the Brazilian Society for Dental Medicine Research (Sociedade Brasileira de Pesquisa Odontologica) from 2001-2006 were assessed in terms of methodological design (aggregate or population-based and individual-based studies, observational and intervention studies, cross-sectional and longitudinal studies); general type (literature review, studies with human subjects, and laboratory studies); and classification into one of the 19 specialty categories recognized by the Brazilian Federal Dentistry Council. Of the 10 406 abstracts presented in this period, 5 203 (50%) were reviewed. Results. Concerning methodological design, 87.5% of the abstracts referred to individual-based studies, whereas 12.5% were of aggregate studies. Concerning the general category, 41.7% referred to studies with human subjects. The remaining abstracts (58.3%) described in vitro (31.1%) or in vivo (23.6%) laboratory research and literature reviews (3.6%). Concerning the Council`s specialty categories, only five had a frequency higher than 10.0%: esthetic dentistry, periodontics, endodontics, pediatric dentistry, and population-based oral health. Conclusions. Brazil`s scientific output in the field of oral health for the period 2001-2006 was balanced, with increasing interest in the area of population-based oral health.

Comparison of SERS performances of Co and Ni ultrathin films over silver to electrochemically activated Co and Ni electrodes

In this work, the surface-enhanced Raman scattering (SERS) spectra of pyridine (py) on thin films of Co and Ni electrodeposited on an Ag electrode activated by oxidation-reduction cycles (ORC) are presented. The SERS spectra from the thin films were compared to those of py on activated bare transition metal electrodes. It was verified that the SERS spectra of py on 3 monolayers (ML)-thick films of Ni and Co presented only bands assignable to the py adsorbed on transition metal surfaces. It was also observed that even for 50 ML-thick transition metal films, the py SERS intensity was ca. 40% of the intensity from the 3 ML-thick films. The relative intensities of the SERS bands depended on the thickness of the films, and for films thicker than 7 ML for Co and 9 ML for Ni they were very similar to those of the bare transition metal electrodes. The transition metal thin films over Ag activated electrodes presented SERS intensities 3 orders of magnitude higher than the ones from bare transition metal electrodes. These films are more suitable to study the adsorption of low Raman cross-section molecules than are ORC-activated transition metal electrodes.

Optimization of performances of gelatin/LiBF(4)-based polymer electrolytes by plasticizing effects

Gelatin is a cheap and abundant natural product with very good biodegradation properties and can be used to obtain acetic acid or LiClO(4)-based gel polymer electrolytes (GPEs) with high ionic conductivity and good stability. This article presents results of GPEs obtained by the plasticization of gelatin and addition of LiBF(4), where the optimization of the system was achieved by using a factorial design type 22 with two variables: glycerol and LiBF(4). From this analysis it was stated that the effect of glycerol as a plasticizer on the ionic conductivity results is much more important than the effect obtained by varying the lithium salt content or the effect of the interaction of both variables. Also all the samples were characterized by X-ray diffraction measurements, UV-vis-NIR spectroscopy and scanning electron microscopy (SEM) and impedance spectroscopy. The ionic conductivity results of all analyzed samples as a function of temperature obey predominantly an Arrhenius relationship and the samples are stable up to 160 degrees C. Good conductivity results combined with transparency and good adhesion to the electrodes have shown that gelatin-based GPEs are very promising materials to be used as solid electrolytes in electrochromic devices. (C) 2009 Elsevier Ltd. All rights reserved.

Thermal Evaluation of a Solarus PV-T collector

Low concentrator PV-T hybrid systems produce both electricity and thermal energy; this fact increases the overall efficiency of the system and reduces the cost of solar electricity. These systems use concentrators which are optical devices that concentrate sunlight on to solar cells and reduce expensive solar cell area. This thesis work deals with the thermal evaluation of a PV-T collector from Solarus.Firstly the thermal efficiency of the low concentrator collector was characterized for the thermal-collector without PV cells on the absorber. Only two types of paint were on the absorber, one for each trough of the collector. Both paints are black one is glossy and the other is dull,. The thermal efficiency at no temperature difference between collector and ambient for these two types of paint was 0.65 and 0.64 respectively; the U-value was 8.4 W/m2°C for the trough with the glossy type of paint and 8.6 W/m2°C for the trough with dull type of paint. The annual thermal output of these two paints was calculated for two different geographic locations, Casablanca, Morocco and Älvkarleby, Sweden.Secondly the thermal efficiency was defined for the PV-T collector with PV cells on the absorber. The PV cells cover 85% of the absorber, without any paint on the rest of the absorber area. We also tested how the electrical power output influences the thermal power output of the PV-T collector. The thermal and total performances for the PV-T collector were only characterized with reflector sides, because of the lack of time we could not characterize them with transparent sides also.

Physiological demands of competitive elite cross-country skiing

Introduction Researchers have, for decades, contributed to an increased collective understanding of the physiological demands in cross-country skiing; however, almost all of these studies have used either non-elite subjects and/or performances that emulate cross-country skiing. To establish the physiological demands of cross-country skiing, it is important to relate the investigated physiological variables to the competitive performance of elite skiers. The overall aim of this doctoral thesis was, therefore, to investigate the external validity of physiological test variables to determine the physiological demands in competitive elite cross-country skiing. Methods The subjects in Study I – IV were elite male (I – III) and female (III – IV) cross-country skiers. In all studies, the relationship between test variables (general and ski-specific) and competitive performances (i.e. the results from competitions or the overall ski-ranking points of the International Ski Federation (FIS) for sprint (FISsprint) and distance (FISdist) races) were analysed. Test variables reflecting the subject’s general strength, upper-body and whole-body oxygen uptake, oxygen uptake and work intensity at the lactate threshold, mean upper-body power, lean mass, and maximal double-poling speed were investigated. Results The ability to maintain a high work rate without accumulating lactate is an indicator of distance performance, independent of sex (I, IV). Independent of sex, high oxygen uptake in whole-body and upper-body exercise was important for both sprint (II, IV) and distance (I, IV) performance. The maximal double-poling speed and 60-s double-poling mean power output were indicators of sprint (IV) and distance performance (I), respectively. Lean mass was correlated with distance performance for women (III), whereas correlations were found between lean mass and sprint performance among both male and female skiers (III). Moreover, no correlations between distance performance and test variables were derived from tests of knee-extension peak torque, vertical jumps, or double poling on a ski-ergometer with 20-s and 360-s durations (I), whereas gross efficiency while treadmill roller skiing showed no correlation with either distance or sprint performance in cross-country skiing (IV). Conclusion The results in this thesis show that, depending on discipline and sex, maximal and peak oxygen uptake, work intensity at the lactate threshold, lean mass, double-poling mean power output, and double-poling maximal speed are all externally valid physiological test variables for evaluation of performance capability among elite cross-country skiers; however, to optimally indicate performance capability different test-variable expressions should be used; in general, the absolute expression appears to be a better indicator of competitive sprint performance whereas the influence of body mass should be considered when evaluating competitive distance performance capability of elite cross-country skiers.

Entrepreneurial risk and labour's share in output

This paper presents a theoretical model which discusses the role played by the entrepreneurial risk on the distribution of the national income. In a two-period general equilibrium framework with competitive risk-averse entrepreneurs it is shown that the highest the risk borne by firms, the lower will be real wages, employment and the labour's share in output. The model helps explain the fall of the labour's share in the Brazilian output during the 1980s.

Output convergence in Mercosur: multivariate time series evidence

The aim of this paper is to provide evidence on output convergence among the Mercosur countries and associates, using multivariate time-series tests. The methodology is based on a combination of tests and estimation procedures, both univariate and multivariate, applied to the differences in per capita real income. We use the definitions of time-series convergence proposed by Bernard & Durlauf and apply unit root and tests proposed by Abuaf & Jorion and Taylor & Sarno. In this same multivariate context, the Flôres, Preumont & Szafarz and Breuer, MbNown & Wallace tests, which allow for the existence of correlations across the series without imposing a common speed of mean reversion, identify the countries that convergence. Concerning the empirical results, there is evidence of long-run convergence or, at least, catching up, for the smaller countries, Bolivia, Paraguay, Peru and Uruguay, towards Brazil and, to some extent, Argentina. In contrast, the evidence on convergence for the larger countries is weaker, as they have followed different (or rather opposing) macroeconomic policy strategies. Thus the future of the whole area will critically depend on the ability of Brazil, Argentina and Chile to find some scope for more cooperative policy actions.

Do shocks permanently change output? : Local persistency in economic time series

While it is recognized that output fuctuations are highly persistent over certain range, less persistent results are also found around very long horizons (Conchrane, 1988), indicating the existence of local or temporary persistency. In this paper, we study time series with local persistency. A test for stationarity against locally persistent alternative is proposed. Asymptotic distributions of the test statistic are provided under both the null and the alternative hypothesis of local persistency. Monte Carlo experiment is conducted to study the power and size of the test. An empirical application reveals that many US real economic variables may exhibit local persistency.

Análise de ecossistemas aquáticos através do método input-output : estudo de caso lagoa Itapeva (sistema lagunar costeiro do Rio Grande do Sul)

A enorme complexidade dos sistemas ecológicos tem sido uma grande barreira para a compreensão e o gerenciamento da problemática ambiental. Neste sentido a modelagem matemática é uma valiosa ferramenta, devido a sua capacidade de organizar as informações disponíveis sobre estes sistemas e de fazer previsões a seu respeito para diferentes condições. Desta forma a análise de sistemas naturais vem sendo abordada de diferentes maneiras, sendo que nas últimas décadas a teoria de ecossistemas expandiu-se e ramos específicos, que permitem seguir e predizer a evolução de ecossistemas, foram formulados. Um destes enfoques, conhecido como análise do fluxo de insumo-produto, pode ser utilizado para explicar o funcionamento e estrutura dos subsistemas de um ecossistema através da descrição dos fluxos de matéria ou energia. A análise do fluxo de insumo-produto pode ser representada através de dois modelos: o modelo determinístico ou o modelo estocástico, tendo sua origem em estudos de caso com o objetivo de analisar a econômica norte-americana, sendo uma extensão prática da teoria clássica de interdependência geral. Este trabalho faz uma abordagem sintética da evolução desta análise, avaliando dados teóricos e principalmente dados referentes à Lagoa Itapeva. A análise de input-output (determinística e estocástica) com o propósito de obter informações no que diz respeito aos fluxos (matéria e energia), é bastante simples; sendo que os modelos determinísticos se prestam melhor para traçar um panorama global e para obter projeções para as variáveis já os modelos estocásticos são mais complexos, mas provêem uma descrição mais acurada. Na Lagoa Itapeva os processos determinísticos demonstraram um baixo índice de ciclagem do carbono entre os três compartimentos em estudo e o fluxo preferencial na normalização corresponde ao compartimento dos produtores primários, isto decorre de não existir loop nos compartimentos em estudo e também não existir fluxos em dois sentidos. Em relação à avaliação estocástica foram observadas uma baixa relação no sentido espacial superfície-meio-fundo da lagoa, e uma boa distribuição espacial norte-centro-sul. Quanto à distribuição temporal, foi constatada uma baixa concordância entre os dados analisados e os dados reais quanto das análises realizadas em intervalos de tempo pequeno (horas) e uma boa concordância nas medidas feitas quando o intervalo foi significativo (meses). Também em relação à Lagoa Itapeva, foi verificado nas análises estocásticas, utilizando-se operadores espaciais, que como a dinâmica biológica nem sempre é linear, os organismos não podem acompanhar imediatamente e perfeitamente as mudanças do ambiente, resultando em tempos de residência de matéria significativamente baixo. Além da análise dos fluxos ligados a este ecossistema lagunar, foram desenvolvidas técnicas de correção e adaptação de dados referentes à amostragem ocorrida na Lagoa durante um ano de campanha. Assim, propõe-se uma nova perspectiva no uso desta metodologia de forma simples e de fácil manipulação matemática.

The evolution of international output differences (1960-2000): From factors to productivity

This article presents a group of exercises of level and growth decomposition of output per worker using cross-country data from 1960 to 2000. It is shown that at least until 1975 factors of production (capital and education) were the main source of output dispersion across economies and that productivity variance was considerably smaller than in late years. Only after this date the prominence of productivity started to show up in the data, as the majority of the literature has found. The growth decomposition exercises showed that the reversal of relative importance of productivity vis-a-vis factors is explained by the very good (bad) performance of productivity of fast (slow) growing economies. Although growth in the period, on average, is mostly due to factors accumulation, its variance is explained by productivity.