Objective Methods for Characterizing Physical Exposures which may contribute to Work-related Musculoskeletal Disorders in Agricultural Workers

Thesis (Ph.D.)--University of Washington, 2016-08

Crescimento e desenvolvimento de Plinia cauliflora de acordo com a intensidade luminosa em clima subtropical

The jabuticaba fruit tree from classified in the Myrtaceae family and Plinia genre. There are about nine species of this fruit tree, that include as most important, Plinia trunciflora (jabuticaba de cabinho), naturally occurring in southwestern Paraná State, Brazil, P. cauliflora (jabuticaba Paulista or Jabuticaba Açu) and P. jaboticaba (Vell) (jabuticaba sabará), with all the over species producing fruit for the industry or fresh consumption. Nevertheless, there aren‟t commercial orchards with this culture, with highest yield part from extractive. This fact can be combined with lack of technical knowledge for the plants produce in the field. As these species are found in the forest, the first point is whether they can adapt to other light intensity conditions. The aim of this work was to identify the adaptive behavior of jabuticaba fruit seedling and tree when they were put in different light intensities and what this can be considered ideal for the growth, as well as, its influence in the leaves secondary compounds production. Two experiments were conducted, with the first involved with the study of the seedlings and the second with plants in the field. The work was carried out at Universidade Tecnológica Federal do Paraná – Câmpus Dois Vizinhos, Paraná State - Brazil. The experimental design was a completely randomized and a block design with four treatments and four replications of 10 seedlings or two plants per plot, according to nursery or orchard conditions, respectively. The treatments were base according to the light intensity. The treatments used were, 1 - full sun, similar the orchard condition, with 0% shading; 2 - side cover with shade cloth and top with transparent plastic, representing a gap forest condition; 3 - side and top cover with shade cloth, representing stage where the forest canopy is closing, focusing only indirect sunlight; 4 - side and top cover with shade cloth, simulating a closed canopy condition, with PPD (photon flux density) of 10% (90% shading); 5 - side and top cover with shade cloth, simulating a more open canopy condition with PPD 65% (35% shading). The growth and development seedling and plant characteristics were evaluated once by month, as also, during time part in the plants the secondary metabolites leaves, soil activity microbiological and the fresh and dry matter root and shoot and, root length from seedlings. For the growth and development of jabuticaba Açú Paulista seedling recommend to use of side cover with shade cloth and top with transparent plastic, representing a gap forest condition. In orchard, for the growth and development of plants jabuticaba Híbrida tree it was recommended the use of side and top cover with shade cloth of some type. For production of secondary metabolites of leaves, the plant must to be full sunlight condition orchard.

Estimates of genetic parameters for growth and wood properties in Eucalyptus pellita F. Muell. to support tree breeding in Vietnam

Eucalyptus pellita demonstrated good growth and wood quality traits in this study, with young plantation grown timber being suitable for both solid and pulp wood products. All traits examined were under moderate levels of genetic control with little genotype by environment interaction when grown on two contrasting sites in Vietnam. Eucalyptus pellita currently has a significant role in reforestation in the tropics. Research to support expanded of use of this species is needed: particularly, research to better understand the genetic control of key traits will facilitate the development of genetically improved planting stock. This study aimed to provide estimates of the heritability of diameter at breast height over bark, wood basic density, Kraft pulp yield, modulus of elasticity and microfibril angle, and the genetic correlations among these traits, and understand the importance of genotype by environment interactions in Vietnam. Data for diameter and wood properties were collected from two 10-year-old, open-pollinated progeny trials of E. pellita in Vietnam that evaluated 104 families from six native range and three orchard sources. Wood properties were estimated from wood samples using near-infrared (NIR) spectroscopy. Data were analysed using mixed linear models to estimate genetic parameters (heritability, proportion of variance between seed sources and genetic correlations). Variation among the nine sources was small compared to additive variance. Narrow-sense heritability and genetic correlation estimates indicated that simultaneous improvements in most traits could be achieved from selection among and within families as the genetic correlations among traits were either favourable or close to zero. Type B genetic correlations approached one for all traits suggesting that genotype by environment interactions were of little importance. These results support a breeding strategy utilizing a single breeding population advanced by selecting the best individuals across all seed sources. Both growth and wood properties have been evaluated. Multi-trait selection for growth and wood property traits will lead to more productive populations of E. pellita both with improved productivity and improved timber and pulp properties.

Enraizamento de mini-estacas de jabuticabeiras, pitangueira, araçazeiro amarelo e sete capoteiro

The most native fruit trees are belonging to Myrtaceae family, which it have as main marketing potential their fruit. Despite the wide acceptance of the fruits of these native fruit cultura, the establishment of commercial orchards is still necessary, because if it prevails extraction in the forest. To start the cultivo in the orchard, the first point is on the mother plant choice, which should provide superior characteristics when compared to other genotypes. Then, it is necessary to choose the method to can produce satisfactory amount of seedlings and preferably without it to lose the mother plant characteristics. For this, it adopts the asexual thechniques, with option for grafting, cuttings and air layering. These techniques when tested with native fruits tree, it proved limiting in theses results, with this, it should to test other it to recommend its use, especially, those fruit native of higher potential as jabuticaba tree, pitanga tree, sete capote tree and araça amarelo tree. The aim of this study was to test the use of asexual propagation through mini-cuttings in these native fruit trees, according to the time of collection, the mini-cutting length and concentration of IBA, as well as, it to relate the results of rooting with tryptophan extracted at certain times. The work was carried out at Universidade Tecnológica Federal do Paraná – Câmpus Dois Vizinhos, Brazil. The samples were collected each two months. The mini-cutting were prepared with 6 or 8 cm, with a pair of leaves reduced to 25% of the original size. The mini-cuttings had their base immersed in liquid solution of indole-butyric acid (IBA) in the concentrations of 0, 3000 and 6000 mg L-1 and then were placed in tubes containing commercial substrate. The experimental design was completely randomized with factorial 2 x 3 x 6 (mini-cutting length x IBA concentration x time of collection), with four replications, it being each plot varied according to the amount of shoots obtained by period time. After 120 days, the rooting and callus formation (%), average number of roots per mini-cutting and the average length of the roots were evaluated. After 60 days of these evaluations, the survival of mini-cuttings rooted after transplant was evaluated. It was evaluated also the production of mini-cuttings of each size in each period time. At the end of the experiment it was evaluated the percentage of survival of mother plantlets. For analysis of tryptophan was used materials branches, leaves and twigs with leaves, taken from the materials used for the production of mini-cutting. It was recommended for hybrid jabuticaba tree the use mini-cutting with eight cm, treated with 6000 mg L-1 of IBA and collected in June. For jabuticaba tree of cabinho and araça amarelo tree the period for propagation by mini-cuttings should be in August, regardless of IBA concentration and length of the mini-cutting. In the jabuticaba tree sabara and sete capote tree is important to obtain more satisfactory results realized the collect in October or December, with the same independence of other levels tested in other factors. However, for sete capote tree should test other techniques to increase the efficiency of propagation. And with pitanga tree recommended to the collection in June, but with 6cm the application of 3000 mg L-1 of IBA and 8 cm with 6000 mg L-1 of IBA.

Interação genótipo-ambiente na densidade de gemas e comprimento de ramos de pessegueiro

The instability of environment between years in climates of subtropical regions difficult to obtain peach trees genotypes with wide adaptation and stable production, contributing to poor crop. The climate instability can affect development stages as flower bud and vegetative bud formation. The factors understanding that control the bud formation, presents elementary importance for effective solutions search to these problems. The objective this work is verify the temperature effect, relative humidity and rainfall on bud density and length shoot (Brindilas) and identify genotypes with more adaptability and stability for this character. Was used 12 peach trees genotypes growing in experimental orchard in the Technology Federal of Paraná State University, Campus Pato Branco with Cfa Köppen climate according to the classification. Data of rainfall, hourly temperature were collected by the weather station of Simepar. They were used three plants for genotype (rehearsal), identify five shoots per tree, in May of each year. Were carried analyzes of length shoot CR (cm), count number of flower bud (GF) and vegetative bud (GV). Also calculated the relationship between GF/GV and flower bud density and vegetative bud density. Evaluations were performer annual 2007-2014. With these data adaptability and stability analyzes were performed using Biplot methodology and correlations analyzes (Pearson) with climates variables. They used the weather data to calculate the sums of hours with temperatures below 20 °C, temperatures between 20-25 °C, temperature between 25-30 °C and temperature above 30 °C, considering the period of August 1fst of the previous period to February 28 of the following year. Pearson correlation coefficients were used for path analysis, GF and DGF as basic variables. For CR, GV and GF the highest average occurred in 2009/10 period. The genotypes ‘BRS Kampai’ and ‘BRS Libra’ highest CR. They are considered stable and adapted as the CR genotypes ‘Casc. 967’ and ‘BRS Kampai’. There was negative correlation between CR and GV for Σh <20 ° C, Σh> 30 °C and Σh with URA <50% and positive correlation between these variables and Σh 25-30 °C and Σh with URA> 70%. The evaluation of GV ‘Cons. 681’ and ‘Casc. 1055’ can be considered adapted and stable. The lowest average was presented by the genotype ‘Sta. Áurea’ though the genotype is also stable. In GF evaluation genotypes are considered adapted ‘BRS Bonão’, ‘Casc. 1055’, ‘Cons. 681’ with adaptability to all evaluated period. In path analysis was direct effect Σh 25-30 °C on flower bud density. In evaluating DGV and DGF and the variations are due to genetic effect. The most adapted and stable genotypes for DGV were ‘T. Beauty’, ‘T. Snow’, ‘Casc. 1055’ and ‘Cons. 681’. CR and GV variables are strongly affected by environment. GF is strongly affected by genetic conditions and moderately affected by environment. DGV and DGF are affected basically by genetic conditions.

Seleção de jabuticabeiras juvenis considerando o vigor, o potencial antioxidante e a tolerância a geadas

The jabuticaba tree has great potential for commercial exploitation. However, its is very little used. This fact shows to be necessary to do studies that allow understand their growth behavior during the year and, if it is tolerant to frost. So that it can establish management strategies for cultivation in orchard. Other point, it is the fact that the long juvenile period of jabuticaba tree limits its use. However, many species have compound leaves that characterize them as functional compounds, what to posible its commercialization. If the leaf jabuticaba tree also present such nutraceutical compounds, this it may become an alternative source of income until the plant to start its yield. The objectives of this study were to analyze the growth behavior, the occurrence of flowering and fruit set, and the frost tolerance of jabuticaba tree genotypes present in the collection of Native Fruit from UTFPR – Câmpus Dois Vizinhos. Associated growth analysis was made evaluation of genetic divergence among these genotypes, checking the adaptive behavior in orchard condition through adaptability and stability analysis based on growth measures to stem and shoots; estimating the repeatability coefficient of stem length of characters and primary shoots, and determine the minimum number of evaluations able to provide certain levels of prediction of the actual value of these individuals. Also determined the genetic divergence among genotypes as the leaves of antioxidant activity by DPPH and ABTS methods, as well as the determination of total phenolics. The genotypes studied were put in orchard in 2009. The growth response in the three cycles was variable between months and genotypes, what it can be difficult the practices in the orchard if it do not use clones. Genotypes 'Silvestre' and 'Açú' showed greater width and leaf area compared with other genotypes, but such behavior is not favored for increased stem growth and primary shoots. Foliar increments in most genotypes occurred in the fall for leaf width, spring for length and leaf area, despite the winter also arise with genotypes, it showed superiority to width and leaf area. Most jabuticabas trees were juvenile stage with only four starting at its transition between the vegetative and reproductive phase. Tolerance to frost was observed in 26 families jabuticabeira of the 29 present in the collection. The diversity among the genotypes was to change with the time, already in each cycle, there was the formation of different groups by the methods used. The methods tested for adaptability and stability of the jabuticaba tree growth behavior did not show the same pattern in the results. The number of measurements needed to predict the actual value of genotypes based on variables evaluated was approximately one to the stem length and four for the shoots based on the method of main components of covariance with 90% probability. he antioxidant activity of the extracts of leaves of jabuticaba tree genotypes were demonstrated high when compared to other species by methods DPPH and ABTS, as well as the amount of phenolic compounds. Genotype 'Silvestre' and 'IAPAR' showed the highest antioxidant activity in the leaves. However, the genetic divergence among genotypes jabuticaba tree from collection of Native Fruit trees at UTFPR - Câmpus Dois Vizinhos for antioxidant activity leaves showed that they have great homogeneity among them and the low divergence. However, it is recommended as possible hybridization the use as parents, José 4, IAPAR 4 and Fernando Xavier genotypes.

'Abnormal vertical growth' : A disorder threatening the viability of the Australian macadamia industry

'Abnormal vertical growth' (AVG) was recognised in Australia as a dysfunction of macadamia (Macadamia spp.) in the mid-1990s. Affected trees displayed unusually erect branching, and poor flowering and yield. Since 2002, the commercial significance of AVG, its cause, and strategies to alleviate its affects, has been studied. The cause is still unknown, and AVG remains a serious threat to orchard viability. AVG affects both commercial and urban macadamia. It occurs predominantly in the warmer-drier production regions of Queensland and New South Wales. An estimated 100,000 orchard trees are affected, equating to an annual loss of $ 10.5 M. In orchards, AVG occurs as aggregations of affected trees, affected tree number can increase by 4.5% per year, and yield reduction can exceed 30%. The more upright cultivars 'HAES 344' and '741' are highly susceptible, while the more spreading cultivars 'A4', 'A16' and 'A268' show tolerance. Incidence is higher (p<0.05) in soils of high permeability and good drainage. No soil chemical anomaly has been found. Fine root dry weight of AVG trees (0-15 cm depth) was found lower (p<0.05) than non-AVG. Next generation sequencing has led to the discovery of a new Bacillus sp. and a bipartite Geminivirus, which may have a role in the disease. Trunk cinctures will increase (p<0.05) yield of moderately affected trees. Further research is needed to clarify whether a pathogen is the cause, the role of soil moisture in AVG, and develop a varietal solution.

Statistical forecasting of the Australian macadamia crop

Three types of forecasts of the total Australian production of macadamia nuts (t nut-in-shell) have been produced early each year since 2001. The first is a long-term forecast, based on the expected production from the tree census data held by the Australian Macadamia Society, suitably scaled up for missing data and assumed new plantings each year. These long-term forecasts range out to 10 years in the future, and form a basis for industry and market planning. Secondly, a statistical adjustment (termed the climate-adjusted forecast) is made annually for the coming crop. As the name suggests, climatic influences are the dominant factors in this adjustment process, however, other terms such as bienniality of bearing, prices and orchard aging are also incorporated. Thirdly, industry personnel are surveyed early each year, with their estimates integrated into a growers and pest-scouts forecast. Initially conducted on a 'whole-country' basis, these models are now constructed separately for the six main production regions of Australia, with these being combined for national totals. Ensembles or suites of step-forward regression models using biologically-relevant variables have been the major statistical method adopted, however, developing methodologies such as nearest-neighbour techniques, general additive models and random forests are continually being evaluated in parallel. The overall error rates average 14% for the climate forecasts, and 12% for the growers' forecasts. These compare with 7.8% for USDA almond forecasts (based on extensive early-crop sampling) and 6.8% for coconut forecasts in Sri Lanka. However, our somewhatdisappointing results were mainly due to a series of poor crops attributed to human reasons, which have now been factored into the models. Notably, the 2012 and 2013 forecasts averaged 7.8 and 4.9% errors, respectively. Future models should also show continuing improvement, as more data-years become available.

Postharvest handling practices and irradiation increase lenticel discolouration in ‘B74’ mango fruit

ABSTRACT 'B74' mango is a recently commercialised cultivar in Australia, with an appealing skin colour and firm fibreless flesh. However, fruit can develop lenticel discolouration (LD) after harvest, with loss of commercial value, especially after γ-irradiation as a disinfestation treatment. We hypothesised that postharvest practices could increase fruit sensitivity to LD and tested that by sequentially sampling fruit between the orchard and the end of the packing line over two seasons, followed by ripening without and with irradiation treatment. Exposure of 441-610 Gy γ-irradiation significantly increased the severity of LD by 6.8-fold in commercially picked and packed ripe fruit, reducing the proportion of marketable fruit from 98% to 2%, compared to irradiated fruit harvested directly from the trees and not exposed to de-sapping solution and packing operations. Also, LD increased progressively as the fruit passed through the harvesting and packing processes, and exposure to only bore water increased LD severity compared with no water contact. Results suggest that the typical de-sapping process used during harvesting is a major contributor to skin sensitivity to LD in 'B74' mango fruit, and that other packing operations involving wetting of the fruit have an additive effect on it. These effects are exacerbated if fruit is irradiated.

A model of macadamia with application to pruning in orchards

A self-organising model of macadamia, expressed using L-Systems, was used to explore aspects of canopy management. A small set of parameters control the basic architecture of the model, with a high degree of self-organisation occurring to determine the fate and growth of buds. Light was sensed at the leaf level and used to represent vigour and accumulated basipetally. Buds also sensed light so as to provide demand in the subsequent redistribution of the vigour. Empirical relationships were derived from a set of 24 completely digitised trees after conversion to multiscale tree graphs (MTG) and analysis with the OpenAlea software library. The ability to write MTG files was embedded within the model so that various tree statistics could be exported for each run of the model. To explore the parameter space a series of runs was completed using a high-throughput computing platform. When combined with MTG generation and analysis with OpenAlea it provided a convenient way in which thousands of simulations could be explored. We allowed the model trees to develop using self-organisation and simulated cultural practices such as hedging, topping, removal of the leader and limb removal within a small representation of an orchard. The model provides insight into the impact of these practices on potential for growth and the light distribution within the canopy and to the orchard floor by coupling the model with a path-tracing program to simulate the light environment. The lessons learnt from this will be applied to other evergreen, tropical fruit and nut trees.

Avaliação agronômica da aplicação do resíduo da indústria processadora de goiabas em pomar comercial de goiabeiras

Dada a escassez de informações na literatura e a importância do manejo adequado de resíduos orgânicos na agricultura, objetivou-se avaliar os efeitos da aplicação do resíduo da indústria processadora de goiabas em um Argissolo Vermelho-Amarelo, determinando-se as alterações provocadas na química do solo, no estado nutricional de goiabeiras e na produção de frutos. As doses de resíduo aplicadas no pomar foram estabelecidas em função dos teores de N no resíduo. O delineamento empregado foi o de blocos casualizados, com cinco tratamentos e quatro repetições, sendo as doses do resíduo (moído) de 0, 9, 18, 27 e 36 t ha-1 (peso do material seco). Foram feitas três aplicações do resíduo: em 2006, 2007 e 2008. O resíduo da indústria processadora de goiabas promoveu aumento nos teores de P no solo; as goiabeiras apresentaram aumento dos teores de N, Ca, Mg e Mn; a produção de frutos foi alterada positiva e significativamente no terceiro ano do experimento.

Evolution of factors affecting mechanical olive harvesting

Harvest efficiency is defined as the percentage of fruits harvested by total production. The percentage of fruits harvested is less than 100% when working with trunk shakers to detach olives. It is important to increase the percentage of fruits harvested in order to increase farmer’s income. This objective can be achieved knowing the evolution of the main factors affecting fruit detachment. Fruit removal force (FRF), fruit weight (P) and the ratio between them are important for harvest efficiency. Field trials took place for two years (2013-2014) in Vilariça Valley, northeast Portugal in an olive orchard with ‘Cobrançosa Transmontana’ cultivar. It was adopted a mechanical harvesting system based on a trunk shaker to detach fruits, and an inverted umbrella to collect fruits. Elementary operation times were measured in seconds to evaluate work rates. FRF and P were measured in the ripening period, to evaluate their evolution. In this paper are presented the preliminary results of the ratio FRF (fruit removal force)/fruit weight evolution during the ripening period (P) and the results of the equipment work rate (trees h-1). The ratio FRF/P has predominantly descendant values in the weeks before harvest, from 140 to 80 as a result of a FRF downward variation from 4.9 to 2.94 N and an upward variation of P from 0.0294 to 0.0637 N. The FRF/P ratio stabilizes the decline in the last week of November just before harvesting, registering in some cases a slight increase in consequence of FRF increase higher than P increase (contrary to the tendency of previous weeks). Equipment work rate showed values between 40 and 57 trees h-1, confirming previous results.

Pesticide bioconcentration factor estimate in apples.

This work objective was to estimate the bioconcentration factor (BCF) of thirty six pesticides used in the Brazilian integrated apple production systems (IAP), in order to select priority pesticides to be monitored in apples. A hypothetical apple orchard was assumed and the model applied was according to Paraíba (2007) [Pesticide bioconcentration modeling for fruit trees. Chemosphere (66:1468-1475)]. The model relates BCF with plant and pesticide characteristics. The octanol-water partition coefficients of pesticides and their degradation rates in the soil were used. The following plant variables were considered: growth rate, total dry biomass, daily water transpiration rate, and total volume of water necessary to produce one kg of fresh fruit per plant. The pesticide stem-water partition coefficient and the transpiration stream concentration factor were calculated using equations that relate each coefficient with the octanol-water partition coefficient. The pesticide BCF in fruits is an important indicator of the pesticide affinity to fruits, and helps to improve the integrated production systems.

Desarrollo de cosechadoras de olivar tradicional basadas en sacudidores de copa

El olivar español es el primer productor mundial de aceite (40%) y de aceituna de mesa (25%). La mayor parte del olivar no es rentable y es clave reducir sus costes. Dado que la recolección supone del orden del 50% de su valor, en ella se deben centrar los esfuerzos. No existe una solución única válida para la recolección de todos los tipos de olivar, aunque, en olivares modernos de media y de alta densidad existe un alto grado de mecanización. Sin embargo, el olivar tradicional, que representa casi el 70% del total, no dispone de una cosechadora. Su introducción supondría un cambio tecnológico y una innovación clave para este tipo de olivar. La presente memoria expone los resultados obtenidos en I+D+i con el objetivo principal de desarrollar la primera cosechadora para la recolección integral de olivar tradicional. En una primera fase, se realizó un estudio de un sistema sacudidor de copa procedente de cítricos para su aplicación a olivar, determinando las características de la sacudida y del funcionamiento de la máquina en campo. Posteriormente, se completaron estos estudios, determinado la forma y zona de caída de los frutos. Por último, se desarrolló un sistema de recepción, logística, limpieza y almacenaje del fruto para incorporación de, alcanzándose resultados muy prometedores en la recolección integral del árbol. En fases posteriores, se realizó una caracterización de árboles y plantaciones tradicionales para poder realizar un diseño específico de sistema de derribo adaptado a esta tipología. Tras un proceso de investigación sobre los principios de la sacudida de la copa y el desprendimiento de los frutos, se avanzó en el diseño y fabricación de nuevos sistemas de sacudida de copa, así como en el desarrollo de tecnología para el copiado automático del contorno del árbol. Los nuevos sistemas para derribar las aceitunas alcanzaron resultados prometedores para su aplicación al olivar tradicional, adaptándose a su morfología y a las características singulares de sus árboles. Finalmente, fruto del trabajo realizado en la línea 1 del convenio Mecaolivar, toda la investigación desarrollada se materializó en la fabricación de un prototipo de cosechadora con sistema sacudidor de copa para el olivar tradicional. Estas máquinas demuestran la viabilidad de la cosecha integral de los olivos tradicionales.

Bioactive compounds of citrus as health promoters

Citrus are a group of fruit species, quite heterogeneous in many aspects, including chemical composition of the fruit. Since ancient times, some citrus fruits were used to prevent and cure human diseases. In the recent decades, it has been demonstrated that fruits can actually help prevent and cure some diseases and above all, they are essential in a balanced diet. Citrus fruits, as one of the groups of fruit species, with greater importance in the world, have been studied for their effects on human health. Some species of citrus were referred as potential antioxidant based therapy for heart disease, cancer and inflammation. Fruit peels and seeds have also high antioxidant activity. The health benefits of citrus fruit have mainly been attributed to the high level of bioactive compounds, such as phenols (e.g., flavanone glycosides, hydroxycinnamic acids), carotenoids and vitamin C. These compounds are present in the fruit pulp and hence in the juice. But some bioactive compounds can be found in parts of the fruit which usually are not used for human food. The content of bioactive compounds depends on the species and cultivar, but also depends on the production system followed in the orchard. Citrus fruits, their derivatives and their by-products (peel, pulp and oil) are reach in different bioactive compounds and its maturity, postharvest and agroindustry processes influence their composition and concentration. The aim of this chapter was to review the main bioactive compounds of the different components of citrus and their relationship to health.