Characterization of the environmental performance of the insulating materials in the enveloping of the building.

Insulating materials in buildings are one of the main factors that should be taken into account when talking about sustainability since with a correct application it could imply important savings for the citizens. In the course of its life, a building requires a series of supplies to perform the duties it has been built for, generating an impact on the environment. The selection of one material or another will establish partly the global environmental impact of the building. Choosing the right insulating material will determine the building's general degree of sustainability, both in its heating savings (energy consumption) and in the environmental impacts caused by its LCA (greenhouse gas emissions). Therefore, we propose to establish guidelines to characterize the insulating material with a better environmental performance in all the stages of its life cycle, taking into account the construction system, the use of the building and its location.

Bio-climatic Design Handbook: designing public space to reach urban sustainability.

The "Bio-climatic Design Handbook: guidelines for the development of planning regulations" is a tool for urban planning and design professionals planning for the construction of public space taking into account bioclimatic and environmental standards. Based on environmental conditions assessment, urban design guidelines are given. These take into account various scales; from the territory to the microclimatic reality. From these general keys for the design of public space the handbook performs recommendations on specific case studies. The application of bioclimatic techniques in urban design promotes comfort in the public space and the respect for the existing environment, while it influences the energy consumption of buildings that conform this open space. The tool was developed in the context of BIOURB project, where Spain and Portugal cooperate writing this bilingual handbook. The case studies are located in this cross-border region.

Replication types: towards a shared taxonomy

Context: The software engineering community is becoming more aware of the need for experimental replications. In spite of the importance of this topic, there is still much inconsistency in the terminology used to describe replications. Objective: Understand the perspectives of empirical researchers about various terms used to characterize replications and propose a consistent taxonomy of terms. Method: A survey followed by plenary discussion during the 2013 International Software Engineering Research Network meeting. Results: We propose a taxonomy which consolidates the disparate terminology. This taxonomy had a high level of agreement among workshop attendees. Conclusion: Consistent terminology is important for any field to progress. This work is the first step in that direction. Additional study and discussion is still necessary.

La coordinación motriz en la Adolescencia y su relación con el IMC, hábitos de práctica y motivación en E.F: Estudio transversal y longitudinal

En las últimas décadas, ha aumentado el interés de la investigación sobre el desarrollo de la coordinación motriz en la adolescencia por ser una etapa sensible, crítica y crucial para la adquisición de hábitos y conductas saludables de vida. Estos estudios han mostrado que la adquisición de unos niveles óptimos de coordinación y competencia motriz van a ser determinantes para el bienestar del adolescente y van a estar relacionados e influidos por otras dimensiones del desarrollo de la persona. Recientes investigaciones han sacado a la luz datos alarmantes sobre el aumento de problemas de coordinación motriz en la población infantil y adolescente (Cantell, Smyth y Ahonen, 1994; Gómez, 2004; Ruiz, Graupera, Gutiérrez y Miyahara, 2003; Sudgen y Chambers, 2005) donde abrocharse los botones de una camisa o correr de forma armónica puede ser todo un mundo lleno de dificultades y consecuencias sobre otras dimensiones del desarrollo (Ramón-Otero y Ruiz, 2015). Estos problemas han sido tratados por investigadores como una “dificultad oculta” (Gómez, Ruiz y Mata, 2006), cuya manifestación está presente en las actividades de la vida cotidiana, en contextos deportivos, en juegos y/o en la clase de Educación Física (Ruiz, 2004). La preocupación por estas dificultades se ha extendido a nivel internacional, creando todo un campo de investigación que estudia el diagnóstico de éstos problemas, conocido bajo las siglas DCD (Developmental Coordination Disorder). El presente estudio se centra en la etapa adolescente, periodo de transición entre la etapa infantil y adulta, caracterizada por numerosos cambios biológicos, cognitivos y socioemocionales (Santrock, 2005), que van a determinar la adaptación con el entorno (Gallahue, Ozmun y Goodway, 2011; Gómez, Ruiz, y Mata, 2006). El propósito principal del estudio es analizar el desarrollo de la coordinación motriz en la etapa adolescente investigando las diferencias de género y de edad en relación con variables psicosociales, los hábitos de práctica y las variables antropométricas. El diseño de la investigación se estructura en dos estudios. El primero de ellos, de carácter transversal, analizó una muestra representativa de 1.966 adolescentes de 1º a 4º de la ESO. El segundo, de naturaleza longitudinal, utilizó un grupo de 89 adolescentes del estudio transversal los cuales fueron estudiados durante 4 años, desde los 12 a los 15 años. Los mismos instrumentos fueron utilizados en ambos estudios: el Test Sportcomp para la evaluación de la coordinación motriz, el test AMPET4 para valorar la motivación de logro para el aprendizaje en Educación Física, el inventario HBSC para conocer los hábitos saludables sobre la práctica de actividad física y, por ultimo, se utilizó un estadiómetro para obtener el peso y la altura y así calcular el índice de masa corporal (IMC). La toma de datos del Estudio Transversal se realizó en 2 cursos académicos (2011/12 - 2012/13), en la cual se requirieron 3 sesiones coincidiendo con la clase de Educación Física. En la primera sesión, se evaluó la coordinación motriz. En la segunda se aplicaron los cuestionarios (AMPET4 y HBSC) y, en la última sesión se midió el peso y la altura en un espacio reservado al estadiómetro. El análisis de datos fue descriptivo y diferencial de cada una de las variables estudiadas: motoras, psicosociales, de hábitos de práctica de actividad física y antropométricas. Asimismo, se llevaron a cabo pruebas de análisis univariante y multivariante, calculando el valor-p y las pruebas de efecto. Respecto al Estudio Longitudinal, la toma de datos se llevó cabo durante 4 años desde el 2011 al 2014. La evaluación de la coordinación motriz se realizó en cada uno de los 4 años. Sin embargo, los 2 cuestionarios y las medidas antropométricas fueron evaluadas en el primer y cuarto año. Los análisis de datos fueron descriptivos y comparativos entre las variables analizadas. En el caso de la coordinación motriz, se realizaron las pruebas de medidas repetidas y, en el caso de las demás variables analizadas, se realizaron Prueba T para muestras relacionadas. Los resultados globales mostraron que el índice motor en el Estudio Transversal fue progresivo en el conjunto de chicos. Sin embargo, en las chicas, el rendimiento se estabiliza a partir de los 13 años. En el caso del Estudio Longitudinal, este índice se estabiliza en los 3 primeros años y a la edad de los 14, es cuando comienzan a acusarse las diferencias de género. En el caso de los hombres el rendimiento mejora y, por el contrario, en las mujeres empeora. En el Estudio Transversal, el análisis de varianza mostraron diferencias en función de la edad [F(7, 1958) = 220.70, p < .001; η2 = .101], del género [F(7, 1958) = 29.76, p < .001; η2 = .044], así como en la interacción entre ambos [F(7, 1958)= 11.90, p < .001; η2 = .018]. Únicamente aparecieron diferencias significativas con la edad en todos los grupos de hombres, excepto entre 14 y 15 años. En el Longitudinal, los contrastes multivariados mostraron que no hubo diferencias sgnificativas en el tiempo [F(3,85) = .05, p = .987, η2= .002] mostrando un nivel de coordinación estable a lo largo de los años, aunque existieron diferencias entre chicos y chicas [F(3,85) = 4.64 p = .005] con un tamaño de efecto destacable (η2 = .141). En cuanto a la motivación de logro para prender en Educación Física, en ambos estudios, los chicos fueron los que obtuvieron puntuaciones más elevadas en todas las dimensiones positivas del test (compromiso de aprendizaje, competencia autopercibida y comparada). Sin embargo, en la dimensión negativa del test, la referida a la ansiedad y al agobio ante el fracaso, fueron las chicas las que puntuaron más alto. En el Estudio Transversal, los resultados mostraron diferencias significativas en todas las dimensiones del AMPET4 en función del nivel de coordinación motriz: compromiso con el aprendizaje [F(2, 1644) = 8.66, p < .001; η2 = .010], competencia autopercibida [F(2, 1644) = 50.94, p < .001; η2 = .048], competencia comparada [F(2, 1644) = 41.56, p < .001, η2 = .020] y ansiedad [F(2, 1644) = 16.67, p < .001, η2 = .058]. En este sentido, los grupos de mejor nivel de coordinación motriz, fueron los que mayor puntuación obtuvieron en las dimensiones positivas y los que menor, en la negativa. En el Estudio Longitudinal, también se encontraron diferencias entre el primer y cuarto año de estudio en todas las dimensiones, excepto en competencia motriz autopercibida. Estas diferencias se tradujeron en una disminución en las 3 variables significativas del primer al cuarto año. Respecto al inventario HBSC, en el Estudio Longitudinal, la prueba T mostró únicamente la existencia de diferencias significativas entre el primer y cuarto año en 2 de los 11 ítems: percepción de la forma física (p = .006) y percepción de la salud (p = .047), los cuales disminuyeron en el intervalo de tiempo del estudio. En el Transversal, las diferencias se observaron en función del género (p < .001) y de la edad (p < .001). Asimismo, se mostraron diferencias significativas en todos los ítems respecto al nivel de coordinación motriz, excepto en 2 de ellos: frecuencia tiempo libre con los amigos fuera del colegio (p = .580) y facilidad para hacer amigos en el centro escolar (p = .098). Por último, en las variables antropométricas, los resultados del Estudio Transversal y Longitudinal coinciden tanto en la estatura como en el peso, apuntando, que en ambos estudios, se produce un aumento progresivo tanto en chicos como en chicas a medida que se avanza en edad. Concretamente en el Transversal, estas diferencias en la edad se encuentran en todos los grupos en ambos géneros, excepto en el conjunto de chicas entre los 14 y los 15 años. Asimismo, ambos estudios coincidieron en que tanto las ganancias en cm y kg, como las puntuaciones medias, fueron mayores en los chicos que en las chicas. Respecto al IMC, los 2 estudios coincidieron en que la evolución es paralela, y tal y como apuntan los resultados del Transversal, no se encontraron diferencias ni en la edad (p = 792) ni en el género (p = 284). No obstante, el Longitudinal apuntó únicamente diferencias significativas entre el primer y cuarto año en el conjunto de los hombres [t(41) = -4.01, p < .001]. Finalmente, y en relación con los niveles de coordinación motriz, hubo diferencias significativas en relación con el IMC (p = .012), mostrando como el grupo de peso normal coincide con puntuaciones óptimas de coordinación motriz. A modo de conclusiones, el presente estudio revela cómo la adquisición de un nivel de coordinación óptimo va a ser fundamental para el desarrollo psicosocial, para el desarrollo de hábitos saludables de práctica y para mantener un IMC dentro de la normalidad para el género y la edad. De esta manera, el desarrollo de la coordinación motriz será un aspecto fundamental para lograr un estado de bienestar físico y mental, y unos hábitos favorables para la práctica de actividad física. ABSTRACT In the past couple of decades, adolescence stage in motor coordination gained significant interest in research especially due to its sensitive and critical importance to achieving a healthy life style. These studies observed how to acquire optimum levels of coordination and motor competence, which proved crucial to the quality of the adolescent stage in addition to being influenced by other dimensions of development for each individual. Recent research shed light to an alarming set of data, which showed increased motor coordination problems in children and adolescents (Cantell, Smyth & Ahonen, 1994; Gómez, 2004; Ruiz, Graupera, Gutierrez & Miyahara, 2003; Sugden & Chambers, 2005). For instance, even to the extent that buttoning a shirt or running in a harmonic form can lead to a whole set of consequences and difficulties on the development stage. Researchers have addressed such problems in various studies such as “dificultad oculta” (Gomez, Ruiz & Mata, 2006), which literally translates as “hidden trouble”. The studies are evidently present in the activities of daily life, sporting contexts, games and/or Physical Education (Ruiz, 2004). Concern about these difficulties spread internationally, creating a whole framework research studying the diagnosis of these problems, known under the acronym DCD (Developmental Coordination Disorder). The study focuses on the adolescent stage, transition period between childhood and adulthood characterized by numerous biological, cognitive and socio-emotional changes (Santrock, 2005), which interestingly determines an individual´s adaptation to the environment (Gallahue, Ozmun & Goodway, 2011; Gomez, Ruiz & Mata, 2006). The main purpose of the study is to analyse the development of motor coordination in the adolescent stage investigating gender differences and age in relation to psychological variables, physical activity habits and anthropometric variables. The research design is structured in two studies. The first (transversal nature), analyses a representative sample of 1,966 adolescents from 1st to 4th of Secondary Education School. The second (longitudinal nature) used a group of 89 teenagers from cross-sectional study, which were studied for four years, from 12 to 15 years. The same instruments were used in both studies, namely; “Sportcomp Test” used to evaluate of motor coordination; “AMPET4 Test” which assesses the motivational achievement of learning Physical Education; “HBSC Inventory” to find out the healthy habits gained from physical activities; And finally a “stadiometer” was used to obtain the weight and height and thus calculate the body mass index (BMI). The data collection of the cross-sectional Study was conducted in two academic years (2011/12 - 2012/13), in which 3 sessions coinciding with the Physical Education level are required. In the first session, motor coordination was evaluated; questionnaires were applied in the second session (AMPET4 and HBSC); and in the last session the weight and height were measured in a reserved space for the “stadiometer”. Notably, data analysis was descriptive and differential in each of the variable studies: motor, psychological, practical and anthropometric habits of physical activity. Thus the tests were conducted in a univariate and multivariate analysis, calculating the p-value and effect tests. Regarding the Longitudinal Study, data collection was carried out during four years from 2011 to 2014 inclusively. The assessment of motor coordination was performed on each of the four years, however, the 2 questionnaires and anthropometric measures were evaluated in the first and fourth year. Data analyses were also descriptive and comparative among the variables that were put to the test. In the case of motor coordination tests, they were done on repeated measures, whilst, in the case of other variables analysed, they were accomplished through T Tests under comparable samples. The overall results showed that the engine Motor Index in Study 1 was progressive in all male gender studies, however in the females the performance remained constant after reaching 13 years of age. For the Longitudinal Study, this index is stabilized in the first 3 years and at the age of 14 is when the gender differences take place. In the case of males, the performance improves, however, in females worsens. The cross-sectional Study, analysis of variance showed differences in terms of age [F(7, 1958) = 220.70, p < .001; η2 = .101], gender [F(7, 1958) = 29.76, p <.001; η2 = .044], as well as their interaction [F(7, 1958) = 11.90, p <.001; η2 = .018]. They only show significant differences in respect to age in the male set sample, in all groups except between 14 and 15 years old. In the Longitudinal, the multivariate contrasts showed no significant differences in time [F(3,85) = 0.05, p = 0.987, η2 = 0.002] showing a stable level of coordination over the years, but if there were differences between both genders [F(3,85) = 4.64, p = .005] it took place with a noteworthy effect size (η2 = .141). In regards, to the Motivational Achievement for learning Physical Education, in both studies the male sample administered obtained higher scores on all the positive dimensions of the test (commitment to learning, self-assessed competence, and comparable competence). However, on the negative assessment side, namely, anxiety and fear of failure, the female sample scored higher than the male one. In Study 1, the multivariate analysis showed significant differences between the psychosocial dimensions and levels of motor coordination with moderate to significant effect [Lambada de Wilks = .931, F(8, 3282) = 14.99; p = <0.001; η2 = .035]. By the same token, the groups with the best level of motor coordination were the highest scoring ones in the positive dimensions, whilst the lower performing ones, performed better in the negative dimension. In the longitudinal study, there is also differences were also found between the first and fourth years of study in all dimensions, except in self-perceived motor competition. These differences resulted in a significant decrease in the 3 variables from first to fourth year. Regarding, the “HBSC Inventory”, the T test in the longitudinal study showed uniquely the existence of significant differences between the first and fourth year in 2 of the 11 items: perception of physical fitness (p = .006) and perceived health (p = 047), which diminished in the interval time of the study. In the Cross-sectional study, the se differences were also observed in gender (p < .001) and age (p < .001). Similarly, they showed significant differences in all items in respect to the motor coordination level, except in 2 of them; frequency of free time with friends outside of school (p = .580) and the ease to make friends at the educational centre (p = 098). And last but not least, the anthropometric variables, both the results of the Transversal and Longitudinal Study matched both height and weight, pointing out that in both studies a gradual increase in both genders, as they grow older. Notably in the Cross-sectional, these differences in age are found in all groups in both genders, except for the set of girls between 14 and 15 years. Thus both studies concluded that both gains in cm and kg and the mean scores were higher amongst males compared to females. Regarding BMI, the 2 studies concluded that the evolution is parallel, and as pointed cross-sectional study there isn’t differences found in age (p = 792) or in gender (p = 284). However, the Longitudinal study uniquely shows significant difference between the first and fourth year for male set sample [t (41) = -4.01, p < .001]. Finally, in relation to levels of motor coordination, there were significant differences in relation to BMI (p = .012), showing how the “normal weight group” matches the optimal scores of motor coordination. In conclusion, this study reveals how the acquisition of an optimal level of coordination is vital for psychological development, to develop and practice healthy habits, and to maintain a BMI within the normal range for age and gender. Therefore, the development of motor coordination is fundamental to achieving a state of physical and mental wellbeing, and preferable habits to pursuing physical activity.

Application of Bayesian approach in geotechnical engineering

En esta Tesis Doctoral se emplean y desarrollan Métodos Bayesianos para su aplicación en análisis geotécnicos habituales, con un énfasis particular en (i) la valoración y selección de modelos geotécnicos basados en correlaciones empíricas; en (ii) el desarrollo de predicciones acerca de los resultados esperados en modelos geotécnicos complejos. Se llevan a cabo diferentes aplicaciones a problemas geotécnicos, como es el caso de: (1) En el caso de rocas intactas, se presenta un método Bayesiano para la evaluación de modelos que permiten estimar el módulo de Young a partir de la resistencia a compresión simple (UCS). La metodología desarrollada suministra estimaciones de las incertidumbres de los parámetros y predicciones y es capaz de diferenciar entre las diferentes fuentes de error. Se desarrollan modelos "específicos de roca" para los tipos de roca más comunes y se muestra cómo se pueden "actualizar" esos modelos "iniciales" para incorporar, cuando se encuentra disponible, la nueva información específica del proyecto, reduciendo las incertidumbres del modelo y mejorando sus capacidades predictivas. (2) Para macizos rocosos, se presenta una metodología, fundamentada en un criterio de selección de modelos, que permite determinar el modelo más apropiado, entre un conjunto de candidatos, para estimar el módulo de deformación de un macizo rocoso a partir de un conjunto de datos observados. Una vez que se ha seleccionado el modelo más apropiado, se emplea un método Bayesiano para obtener distribuciones predictivas de los módulos de deformación de macizos rocosos y para actualizarlos con la nueva información específica del proyecto. Este método Bayesiano de actualización puede reducir significativamente la incertidumbre asociada a la predicción, y por lo tanto, afectar las estimaciones que se hagan de la probabilidad de fallo, lo cual es de un interés significativo para los diseños de mecánica de rocas basados en fiabilidad. (3) En las primeras etapas de los diseños de mecánica de rocas, la información acerca de los parámetros geomecánicos y geométricos, las tensiones in-situ o los parámetros de sostenimiento, es, a menudo, escasa o incompleta. Esto plantea dificultades para aplicar las correlaciones empíricas tradicionales que no pueden trabajar con información incompleta para realizar predicciones. Por lo tanto, se propone la utilización de una Red Bayesiana para trabajar con información incompleta y, en particular, se desarrolla un clasificador Naïve Bayes para predecir la probabilidad de ocurrencia de grandes deformaciones (squeezing) en un túnel a partir de cinco parámetros de entrada habitualmente disponibles, al menos parcialmente, en la etapa de diseño. This dissertation employs and develops Bayesian methods to be used in typical geotechnical analyses, with a particular emphasis on (i) the assessment and selection of geotechnical models based on empirical correlations; on (ii) the development of probabilistic predictions of outcomes expected for complex geotechnical models. Examples of application to geotechnical problems are developed, as follows: (1) For intact rocks, we present a Bayesian framework for model assessment to estimate the Young’s moduli based on their UCS. Our approach provides uncertainty estimates of parameters and predictions, and can differentiate among the sources of error. We develop ‘rock-specific’ models for common rock types, and illustrate that such ‘initial’ models can be ‘updated’ to incorporate new project-specific information as it becomes available, reducing model uncertainties and improving their predictive capabilities. (2) For rock masses, we present an approach, based on model selection criteria to select the most appropriate model, among a set of candidate models, to estimate the deformation modulus of a rock mass, given a set of observed data. Once the most appropriate model is selected, a Bayesian framework is employed to develop predictive distributions of the deformation moduli of rock masses, and to update them with new project-specific data. Such Bayesian updating approach can significantly reduce the associated predictive uncertainty, and therefore, affect our computed estimates of probability of failure, which is of significant interest to reliability-based rock engineering design. (3) In the preliminary design stage of rock engineering, the information about geomechanical and geometrical parameters, in situ stress or support parameters is often scarce or incomplete. This poses difficulties in applying traditional empirical correlations that cannot deal with incomplete data to make predictions. Therefore, we propose the use of Bayesian Networks to deal with incomplete data and, in particular, a Naïve Bayes classifier is developed to predict the probability of occurrence of tunnel squeezing based on five input parameters that are commonly available, at least partially, at design stages.

Evidence of the presence of bias in subjective metrics: analysis within a family of experiments

Context: Measurement is crucial and important to empirical software engineering. Although reliability and validity are two important properties warranting consideration in measurement processes, they may be influenced by random or systematic error (bias) depending on which metric is used. Aim: Check whether, the simple subjective metrics used in empirical software engineering studies are prone to bias. Method: Comparison of the reliability of a family of empirical studies on requirements elicitation that explore the same phenomenon using different design types and objective and subjective metrics. Results: The objectively measured variables (experience and knowledge) tend to achieve more reliable results, whereas subjective metrics using Likert scales (expertise and familiarity) tend to be influenced by systematic error or bias. Conclusions: Studies that predominantly use variables measured subjectively, like opinion polls or expert opinion acquisition.

Polymer interaction with macroscopic carbon nanotube fibres and fabrication of nanostructured composites

El ensamblado de nanotubos de carbono (CNT) como una fibra macroscópica en la cual están orientados preferentemente paralelos entre sí y al eje de la fibra, ha dado como resultado un nuevo tipo de fibra de altas prestaciones derivadas de la explotación eficiente de las propiedades axiales de los CNTs, y que tiene un gran número de aplicaciones potenciales. Fibras continuas de CNTs se produjeron en el Instituto IMDEA Materiales mediante el proceso de hilado directo durante la reacción de síntesis por deposición química de vapores. Uno de los objetivos de esta tesis es el estudio de la estructura de estas fibras mediante técnicas del estado del arte de difracción de rayos X de sincrotrón y la elaboración de un modelo estructural de dicho material. Mediciones texturales de adsorción de gases, análisis de micrografías de electrones y dispersión de rayos X de ángulo alto y bajo (WAXS/SAXS) indican que el material tiene una estructura mesoporosa con una distribución de tamaño de poros ancha derivada del amplio rango de separaciones entre manojos de CNTs, así como una superficie específica de 170m2/g. Los valores de dimensión fractal obtenidos mediante SAXS y análisis Barrett-Joyner-Halenda (BJH) de mediciones texturales coinciden en 2.4 y 2.5, respectivamente, resaltando el carácter de red de la estructura de dichas fibras. La estructura mesoporosa y tipo hilo de las fibra de CNT es accesible a la infiltración de moléculas externas (líquidos o polímeros). En este trabajo se estudian los cambios en la estructura multiescala de las fibras de CNTs al interactuar con líquidos y polímeros. Los efectos de la densificación en la estructura de fibras secas de CNT son estudiados mediante WAXS/SAXS. El tratamiento de densificación junta los manojos de la fibra (los poros disminuyen de tamaño), resultando en un incremento de la densidad de la fibra. Sin embargo, los dominios estructurales correspondientes a la transferencia de esfuerzo mecánica y carga eléctrica en los nanotubos no son afectados durante este proceso de densificación; como consecuencia no se produce un efecto sustancial en las propiedades mecánicas y eléctricas. Mediciones de SAXS and fibra de CNT antes y después de infiltración de líquidos confirman la penetración de una gran cantidad de líquidos que llena los poros internos de la fibra pero no se intercalan entre capas de nanotubos adyacentes. La infiltración de cadenas poliméricas de bajo peso molecular tiende a expandir los manojos en la fibra e incrementar el ángulo de apertura de los poros. Los resultados de SAXS indican que la estructura interna de la fibra en términos de la organización de las capas de tubos y su orientación no es afectada cuando las muestras consisten en fibras infiltradas con polímeros de alto peso molecular. La cristalización de varios polímeros semicristalinos es acelerada por la presencia de fibras de CNTs alineados y produce el crecimiento de una capa transcristalina normal a la superficie de la fibra. Esto es observado directamente mediante microscopía óptica polarizada, y detectado mediante calorimetría DSC. Las lamelas en la capa transcristalina tienen orientación de la cadena polimérica paralela a la fibra y por lo tanto a los nanotubos, de acuerdo con los patrones de WAXS. Esta orientación preferencial se sugiere como parte de la fuerza impulsora en la nucleación. La nucleación del dominio cristalino polimérico en la superficie de los CNT no es epitaxial. Ocurre sin haber correspondencia entre las estructuras cristalinas del polímero y los nanotubos. Estas observaciones contribuyen a la compresión del fenómeno de nucleación en CNTs y otros nanocarbonos, y sientan las bases para el desarrollo de composites poliméricos de gran escala basados en fibra larga de CNTs alineados. ABSTRACT The assembly of carbon nanotubes into a macroscopic fibre material where they are preferentially aligned parallel to each other and to the fibre axis has resulted in a new class of high-performance fibres, which efficiently exploits the axial properties of the building blocks and has numerous applications. Long, continuous CNT fibres were produced in IMDEA Materials Institute by direct fibre spinning from a chemical vapour deposition reaction. These fibres have a complex hierarchical structure covering multiple length scales. One objective of this thesis is to reveal this structure by means of state-of-the-art techniques such as synchrotron X-ray diffraction, and to build a model to link the fibre structural elements. Texture and gas absorption measurements, using electron microscopy, wide angle and small angle X-ray scattering (WAXS/SAXS), and pore size distribution analysis by Barrett-Joyner-Halenda (BJH), indicate that the material has a mesoporous structure with a wide pore size distribution arising from the range of fibre bundle separation, and a high surface area _170m2/g. Fractal dimension values of 2.4_2.5 obtained from the SAXS and BJH measurements highlight the network structure of the fibre. Mesoporous and yarn-like structure of CNT fibres make them accessible to the infiltration of foreign molecules (liquid or polymer). This work studies multiscale structural changes when CNT fibres interact with liquids and polymers. The effects of densification on the structure of dry CNT fibres were measured by WAXS/SAXS. The densification treatment brings the fibre bundles closer (pores become smaller), leading to an increase in fibre density. However, structural domains made of the load and charge carrying nanotubes are not affected; consequently, it has no substantial effect on mechanical and electrical properties. SAXS measurements on the CNT fibres before and after liquid infiltration imply that most liquids are able to fill the internal pores but not to intercalate between nanotubes. Successful infiltration of low molecular weight polymer chains tends to expand the fibre bundles and increases the pore-opening angle. SAXS results indicate that the inner structure of the fibre, in terms of the nanotube layer arrangement and the fibre alignment, are not largely affected when infiltrated with polymers of relatively high molecular weight. The crystallisation of a variety of semicrystalline polymers is accelerated by the presence of aligned fibres of CNTs and results in the growth of a transcrystalline layer perpendicular to the fibre surface. This can be observed directly under polarised optical microscope, and detected by the exothermic peaks during differential scanning calorimetry. The discussion on the driving forces for the enhanced nucleation points out the preferential chain orientation of polymer lamella with the chain axis parallel to the fibre and thus to the nanotubes, which is confirmed by two-dimensional WAXS patterns. A non-epitaxial polymer crystal growth habit at the CNT-polymer interface is proposed, which is independent of lattice matching between the polymer and nanotubes. These findings contribute to the discussion on polymer nucleation on CNTs and other nanocarbons, and their implication for the development of large polymer composites based on long and aligned fibres of CNTs.

Especificaciones eMathTeacher, creación del Modelo Granular Lingüístico de la evaluación del aprendizaje humano, y diseño de sistemas que implementan estos conceptos

El concepto de algoritmo es básico en informática, por lo que es crucial que los alumnos profundicen en él desde el inicio de su formación. Por tanto, contar con una herramienta que guíe a los estudiantes en su aprendizaje puede suponer una gran ayuda en su formación. La mayoría de los autores coinciden en que, para determinar la eficacia de una herramienta de visualización de algoritmos, es esencial cómo se utiliza. Así, los estudiantes que participan activamente en la visualización superan claramente a los que la contemplan de forma pasiva. Por ello, pensamos que uno de los mejores ejercicios para un alumno consiste en simular la ejecución del algoritmo que desea aprender mediante el uso de una herramienta de visualización, i. e. consiste en realizar una simulación visual de dicho algoritmo. La primera parte de esta tesis presenta los resultados de una profunda investigación sobre las características que debe reunir una herramienta de ayuda al aprendizaje de algoritmos y conceptos matemáticos para optimizar su efectividad: el conjunto de especificaciones eMathTeacher, además de un entorno de aprendizaje que integra herramientas que las cumplen: GRAPHs. Hemos estudiado cuáles son las cualidades esenciales para potenciar la eficacia de un sistema e-learning de este tipo. Esto nos ha llevado a la definición del concepto eMathTeacher, que se ha materializado en el conjunto de especificaciones eMathTeacher. Una herramienta e-learning cumple las especificaciones eMathTeacher si actúa como un profesor virtual de matemáticas, i. e. si es una herramienta de autoevaluación que ayuda a los alumnos a aprender de forma activa y autónoma conceptos o algoritmos matemáticos, corrigiendo sus errores y proporcionando pistas para encontrar la respuesta correcta, pero sin dársela explícitamente. En estas herramientas, la simulación del algoritmo no continúa hasta que el usuario introduce la respuesta correcta. Para poder reunir en un único entorno una colección de herramientas que cumplan las especificaciones eMathTeacher hemos creado GRAPHs, un entorno ampliable, basado en simulación visual, diseñado para el aprendizaje activo e independiente de los algoritmos de grafos y creado para que en él se integren simuladores de diferentes algoritmos. Además de las opciones de creación y edición del grafo y la visualización de los cambios producidos en él durante la simulación, el entorno incluye corrección paso a paso, animación del pseudocódigo del algoritmo, preguntas emergentes, manejo de las estructuras de datos del algoritmo y creación de un log de interacción en XML. Otro problema que nos planteamos en este trabajo, por su importancia en el proceso de aprendizaje, es el de la evaluación formativa. El uso de ciertos entornos e-learning genera gran cantidad de datos que deben ser interpretados para llegar a una evaluación que no se limite a un recuento de errores. Esto incluye el establecimiento de relaciones entre los datos disponibles y la generación de descripciones lingüísticas que informen al alumno sobre la evolución de su aprendizaje. Hasta ahora sólo un experto humano era capaz de hacer este tipo de evaluación. Nuestro objetivo ha sido crear un modelo computacional que simule el razonamiento del profesor y genere un informe sobre la evolución del aprendizaje que especifique el nivel de logro de cada uno de los objetivos definidos por el profesor. Como resultado del trabajo realizado, la segunda parte de esta tesis presenta el modelo granular lingüístico de la evaluación del aprendizaje, capaz de modelizar la evaluación y generar automáticamente informes de evaluación formativa. Este modelo es una particularización del modelo granular lingüístico de un fenómeno (GLMP), en cuyo desarrollo y formalización colaboramos, basado en la lógica borrosa y en la teoría computacional de las percepciones. Esta técnica, que utiliza sistemas de inferencia basados en reglas lingüísticas y es capaz de implementar criterios de evaluación complejos, se ha aplicado a dos casos: la evaluación, basada en criterios, de logs de interacción generados por GRAPHs y de cuestionarios de Moodle. Como consecuencia, se han implementado, probado y utilizado en el aula sistemas expertos que evalúan ambos tipos de ejercicios. Además de la calificación numérica, los sistemas generan informes de evaluación, en lenguaje natural, sobre los niveles de competencia alcanzados, usando sólo datos objetivos de respuestas correctas e incorrectas. Además, se han desarrollado dos aplicaciones capaces de ser configuradas para implementar los sistemas expertos mencionados. Una procesa los archivos producidos por GRAPHs y la otra, integrable en Moodle, evalúa basándose en los resultados de los cuestionarios. ABSTRACT The concept of algorithm is one of the core subjects in computer science. It is extremely important, then, for students to get a good grasp of this concept from the very start of their training. In this respect, having a tool that helps and shepherds students through the process of learning this concept can make a huge difference to their instruction. Much has been written about how helpful algorithm visualization tools can be. Most authors agree that the most important part of the learning process is how students use the visualization tool. Learners who are actively involved in visualization consistently outperform other learners who view the algorithms passively. Therefore we think that one of the best exercises to learn an algorithm is for the user to simulate the algorithm execution while using a visualization tool, thus performing a visual algorithm simulation. The first part of this thesis presents the eMathTeacher set of requirements together with an eMathTeacher-compliant tool called GRAPHs. For some years, we have been developing a theory about what the key features of an effective e-learning system for teaching mathematical concepts and algorithms are. This led to the definition of eMathTeacher concept, which has materialized in the eMathTeacher set of requirements. An e-learning tool is eMathTeacher compliant if it works as a virtual math trainer. In other words, it has to be an on-line self-assessment tool that helps students to actively and autonomously learn math concepts or algorithms, correcting their mistakes and providing them with clues to find the right answer. In an eMathTeacher-compliant tool, algorithm simulation does not continue until the user enters the correct answer. GRAPHs is an extendible environment designed for active and independent visual simulation-based learning of graph algorithms, set up to integrate tools to help the user simulate the execution of different algorithms. Apart from the options of creating and editing the graph, and visualizing the changes made to the graph during simulation, the environment also includes step-by-step correction, algorithm pseudo-code animation, pop-up questions, data structure handling and XML-based interaction log creation features. On the other hand, assessment is a key part of any learning process. Through the use of e-learning environments huge amounts of data can be output about this process. Nevertheless, this information has to be interpreted and represented in a practical way to arrive at a sound assessment that is not confined to merely counting mistakes. This includes establishing relationships between the available data and also providing instructive linguistic descriptions about learning evolution. Additionally, formative assessment should specify the level of attainment of the learning goals defined by the instructor. Till now, only human experts were capable of making such assessments. While facing this problem, our goal has been to create a computational model that simulates the instructor’s reasoning and generates an enlightening learning evolution report in natural language. The second part of this thesis presents the granular linguistic model of learning assessment to model the assessment of the learning process and implement the automated generation of a formative assessment report. The model is a particularization of the granular linguistic model of a phenomenon (GLMP) paradigm, based on fuzzy logic and the computational theory of perceptions, to the assessment phenomenon. This technique, useful for implementing complex assessment criteria using inference systems based on linguistic rules, has been applied to two particular cases: the assessment of the interaction logs generated by GRAPHs and the criterion-based assessment of Moodle quizzes. As a consequence, several expert systems to assess different algorithm simulations and Moodle quizzes have been implemented, tested and used in the classroom. Apart from the grade, the designed expert systems also generate natural language progress reports on the achieved proficiency level, based exclusively on the objective data gathered from correct and incorrect responses. In addition, two applications, capable of being configured to implement the expert systems, have been developed. One is geared up to process the files output by GRAPHs and the other one is a Moodle plug-in set up to perform the assessment based on the quizzes results.

Identification of the proton pathway in bacterial reaction centers: Inhibition of proton transfer by binding of Zn2+ or Cd2+

The reaction center (RC) from Rhodobacter sphaeroides converts light into chemical energy through the light induced two-electron, two-proton reduction of a bound quinone molecule QB (the secondary quinone acceptor). A unique pathway for proton transfer to the QB site had so far not been determined. To study the molecular basis for proton transfer, we investigated the effects of exogenous metal ion binding on the kinetics of the proton-assisted electron transfer kAB(2) (QA−•QB−• + H+ → QA(QBH)−, where QA is the primary quinone acceptor). Zn2+ and Cd2+ bound stoichiometrically to the RC (KD ≤ 0.5 μM) and reduced the observed value of kAB(2) 10-fold and 20-fold (pH 8.0), respectively. The bound metal changed the mechanism of the kAB(2) reaction. In native RCs, kAB(2) was previously shown to be rate-limited by electron transfer based on the dependence of kAB(2) on the driving force for electron transfer. Upon addition of Zn2+ or Cd2+, kAB(2) became approximately independent of the electron driving force, implying that the rate of proton transfer was reduced (≥ 102-fold) and has become the rate-limiting step. The lack of an effect of the metal binding on the charge recombination reaction D+•QAQB−• → DQAQB suggests that the binding site is located far (>10 Å) from QB. This hypothesis is confirmed by preliminary x-ray structure analysis. The large change in the rate of proton transfer caused by the stoichiometric binding of the metal ion shows that there is one dominant site of proton entry into the RC from which proton transfer to QB−• occurs.

Assessing climate impacts

Assessing climate impacts involves identifying sources and characteristics of climate variability, and mitigating potential negative impacts of that variability. Associated research focuses on climate driving mechanisms, biosphere–hydrosphere responses and mediation, and human responses. Examples of climate impacts come from 1998 flooding in the Yangtze River Basin and hurricanes in the Caribbean and Central America. Although we have limited understanding of the fundamental driving-response interactions associated with climate variability, increasingly powerful measurement and modeling techniques make assessing climate impacts a rapidly developing frontier of science.

Bases teóricas dos processos de medicalização: um olhar sobre as forças motrizes

Introdução: O tema medicalização emerge como objeto de estudo no campo da sociologia da saúde, a partir da década de 70, nas vozes de Irving Zola, Ivan Illich, Peter Conrad e Michel Foucalt; as quais indicaram a crescente influência da medicina em campos que até então não lhe pertenciam. E, no decorrer dos anos, o termo vem sendo apropriado por vários campos: na saúde, na educação, na psicologia, entre outros. Esta configuração levou alguns estudiosos da primeira década do século XXI, a se preocupar com o uso impreciso e vago do conceito de medicalização na produção científica. Neste sentido, este estudo busca olhar para os processos de medicalização, tomando-o em sua pluralidade a fim de discernir as principais forças motrizes e coteja-las com as mudanças na contemporaneidade. Objetivo: Recuperar as forças motrizes contidas nas principais contribuições dos autores primários sobre os processos de medicalização. Método: Realizou-se um exercício hermenêutico composto pelos seguintes passos: leitura profunda do texto, fichamento dos aspectos centrais que caracterizam as diversas concepções sobre medicalização. Interpretação do conteúdo por meio da abstração dos núcleos de sentido e dos referenciais teóricos que lhe dão suporte. Resultados: A partir deste movimento reflexivo e crítico conseguiu-se desvelar quatro conceitos nucleares que representam as principais forças motrizes: a indústria, as instituições, o Estado e a sociedade. Zola oferece indícios que o Estado e a indústria teriam levado a sociedade à dependência da medicina. Para Illich, a medicina, por si só, detém o poder comparada as outras instituições. Para Michel Foucault, a medicina deixou de ser uma ciência pura e transformou-se numa instituição subordinada a um sistema econômico e de poder, enfim a uma lógica subjacente aos princípios e regras de governo. Em contrapartida, para Conrad a medicalização não constitui um empreendimento exclusivo da medicina, prevalecendo os interesses de outras instituições e organizações sociais. O sentido com que cada um desses conceitos é usado difere entre os autores e a distinção desses aspectos é chave para compreender a contribuição efetiva de cada um. Da mesma forma, ocorre quando os autores discutem as consequências e os efeitos causados pelos processos de medicalização. Alguns autores direcionam seus efeitos para os indivíduos, num processo de exacerbação da individualização; enquanto que outros focam os efeitos da medicalização nas políticas de saúde e na questão econômica associada ao oneroso custo financeiro para a sociedade e o país. Considerações finais: A recuperação e a compreensão dos significados subjacentes às principais forças motrizes presentes nas contribuições de cada autor apresentadas nesta investigação constituem-se em passo importante para subsidiar a reflexão sobre processos concretos de medicalização no início do século XXI, um período marcado por aceleradas transformações, no qual, entre outros aspectos, a medicina e várias instituições têm sido crescentemente, capturadas para satisfazer, de um lado o consumismo, e de outro, a avidez pelo lucro do mercado capitalista; ao mesmo tempo em que forças desagregadoras atravessam os sujeitos impactando sua autonomia e identidade política, social e econômica.

Validation of the Item-Attribute Matrix in TIMSS-Mathematics Using Multiple Regression and the LSDM

The purposes of this study were (1) to validate of the item-attribute matrix using two levels of attributes (Level 1 attributes and Level 2 sub-attributes), and (2) through retrofitting the diagnostic models to the mathematics test of the Trends in International Mathematics and Science Study (TIMSS), to evaluate the construct validity of TIMSS mathematics assessment by comparing the results of two assessment booklets. Item data were extracted from Booklets 2 and 3 for the 8th grade in TIMSS 2007, which included a total of 49 mathematics items and every student's response to every item. The study developed three categories of attributes at two levels: content, cognitive process (TIMSS or new), and comprehensive cognitive process (or IT) based on the TIMSS assessment framework, cognitive procedures, and item type. At level one, there were 4 content attributes (number, algebra, geometry, and data and chance), 3 TIMSS process attributes (knowing, applying, and reasoning), and 4 new process attributes (identifying, computing, judging, and reasoning). At level two, the level 1 attributes were further divided into 32 sub-attributes. There was only one level of IT attributes (multiple steps/responses, complexity, and constructed-response). Twelve Q-matrices (4 originally specified, 4 random, and 4 revised) were investigated with eleven Q-matrix models (QM1 ~ QM11) using multiple regression and the least squares distance method (LSDM). Comprehensive analyses indicated that the proposed Q-matrices explained most of the variance in item difficulty (i.e., 64% to 81%). The cognitive process attributes contributed to the item difficulties more than the content attributes, and the IT attributes contributed much more than both the content and process attributes. The new retrofitted process attributes explained the items better than the TIMSS process attributes. Results generated from the level 1 attributes and the level 2 attributes were consistent. Most attributes could be used to recover students' performance, but some attributes' probabilities showed unreasonable patterns. The analysis approaches could not demonstrate if the same construct validity was supported across booklets. The proposed attributes and Q-matrices explained the items of Booklet 2 better than the items of Booklet 3. The specified Q-matrices explained the items better than the random Q-matrices.

Ensino da avaliação perceptivoauditiva da voz por meio de um ambiente virtual de aprendizagem

A avaliação vocal é realizada predominantemente por meio da avaliação perceptivoauditiva, sendo dependente de conhecimentos teóricos prévios e de treinamento prático e dinâmico. Entretanto, ainda são escassas as iniciativas educacionais que se utilizam das novas tecnologias para o ensino da avaliação perceptivoauditiva da voz. A utilização de estratégias com novas tecnologias de informação e comunicação, hoje tão presentes e familiarizadas no meio universitário, apresentam o intuito de facilitar e otimizar o processo de ensino e aprendizagem. Desta forma, este estudo teve o propósito de elaborar e avaliar um curso a distância em um ambiente virtual de aprendizagem sobre essa temática. Elaborou-se um curso a distância sobre a avaliação perceptivoauditiva da voz organizado em quatro módulos principais: 1. Noções básicas de anatomia e fisiologia da fonação; 2. Ouvindo vozes; 3. Avaliação perceptivoauditiva da voz e 4. Aplicabilidade da avaliação perceptivoauditiva da voz, além de um adicional com vídeos sobre curiosidades e sugestão de material complementar para estudo. O ambiente virtual de aprendizagem (AVA) também apresentou diversas ferramentas educacionais como textos, imagens ilustrativas, videoaulas, vídeos, arquivos de áudio, atividades práticas individuais, fóruns, além de recursos de interatividade entre alunos e tutora. Este material foi antecipadamente avaliado por três especialistas que avaliaram o material positivamente como uma inovadora e importante ferramenta educacional que poderá ser utilizada na formação de estudantes na área de voz. Foram convidados a participar do curso a distância, 133 alunos do 1o ao 4o ano de um curso de graduação em Fonoaudiologia de uma Universidade do interior paulista. Concordaram em participar 33 estudantes e desses, nove concluíram o curso. Os alunos responderam a avaliações de conteúdo nos momentos pré e pós-curso, de forma presencial e a avaliações de cada módulo, realizadas por meio de questões específicas e atividades práticas, no próprio site. Ao término do curso os alunos também responderam a uma avaliação motivacional do AVA. Observou-se diferença estatisticamente significante na média de acertos nas provas pré e pós-curso dos alunos, nas questões teóricas (p= 0,031), nas práticas (p=0,000) e no total (p=0,002), demonstrando que o material elaborado foi capaz de aumentar o conhecimento dos estudantes a respeito de seu tema. O AVA apresentou alto índice de satisfação motivacional e foi avaliado por todos os participantes como um curso impressionante, de acordo com o instrumento de avaliação motivacional utilizado. Conclui-se que foi possível elaborar um ambiente virtual de aprendizagem (AVA), em formato de curso a distância, sobre a temática da avaliação perceptivoauditiva da voz e que o material elaborado apresenta um importante potencial de ensino e aprendizagem sobre esse tema.

PCDD/F Emissions from Light-Duty Diesel Vehicles Operated under Highway Conditions and a Diesel-Engine Based Power Generator

PCDD/F emissions from three light-duty diesel vehicles–two vans and a passenger car–have been measured in on-road conditions. We propose a new methodology for small vehicles: a sample of exhaust gas is collected by means of equipment based on United States Environmental Protection Agency (U.S. EPA) method 23A for stationary stack emissions. The concentrations of O2, CO, CO2, NO, NO2 and SO2 have also been measured. Six tests were carried out at 90-100 km/h on a route 100 km long. Two additional tests were done during the first 10 minutes and the following 60 minutes of the run to assess the effect of the engine temperature on PCDD/F emissions. The emission factors obtained for the vans varied from 1800 to 8400 pg I-TEQ/Nm3 for a 2004 model year van and 490-580 pg I-TEQ/Nm3 for a 2006 model year van. Regarding the passenger car, one run was done in the presence of a catalyst and another without, obtaining emission factors (330-880 pg I-TEQ/Nm3) comparable to those of the modern van. Two other tests were carried out on a power generator leading to emission factors ranging from 31 to 78 pg I-TEQ/Nm3. All the results are discussed and compared with literature.

Satisfaction of clinical nurses with the formation of a university tutorial program

Degree in nursing from the Universitat Jaume I (UJI) maintains the continuity of learning with an integrated learning methodology (theory, simulated practice and clinical practice). The objective of this methodology is to achieve consistency between the knowledge, abilities and skills acquired in the classroom, laboratory and clinic to ensure skills related. Reference Nurse is a key figure in this process, you receive accredited training on Educational Methods, assessment of competence, and Evidence-Based Practice that plays the role of evaluating in conjunction with the subjects. It does not perceive economic remuneration. The main objective of this study is to determine the level of satisfaction of clinical nurses on the Nurses Training Program Reference in UJI (Castellon- Spain). A cross sectional study was performed and conducted on 150 nurses. 112 questionnaires were completed, collected and analysed at the end of training. The survey consists of 12 items measured with the Likert scale with 5 levels of response and two open questions regarding the positive and negative aspects of the course and to add in this formation. The training is always performed by the same faculty and it's used four sessions of 2012. We perform a quantitative analysis of the variables under study using measures of central tendency. The completion rate of the survey is 95.53% (n=107). Anonymity rate of 54,14% The overall satisfaction level of training was 3.65 (SD = 0.89) on 5 points. 54.2% (n = 58) of the reference nurses made a contribution in the open questions described in the overall results. The overall satisfaction level can be considered acceptable. It is considered necessary to elaborate a specific survey to detect areas of improvement of nurse training program reference and future recruitment strategies. The main objective of the present work is the selection and integration of different methodologies among those applicable within the framework of the European Higher Education Area to combine teaching methods with high implication from both lecturers and students.