Attivita' non-termica nel nucleo della radiogalassia 3c84

La maggior parte dei corpi celesti che popolano l’universo emette “luce”. Ciò significa che essi sono visibili dai nostri occhi quando li alziamo sul cielo notturno o al limite, se troppo lontani, da potenti telescopi ottici. Questa luminosità ha nella maggior parte dei casi un’origine termonucleare, dovuta cioè alla presenza di sorgenti come le stelle, in cui l’elevata temperatura interna legata alle reazioni di fusione che le mantengono in vita produce una radiazione di corpo nero in banda ottica. Tuttavia, dato che la parte visibile costituisce solo una minuscola porzione dell’intero spettro elettromagnetico, andando ad indagare emissioni a differenti frequenze come il radio, l’infrarosso, l’ultravioletto, X e gamma, si rileva la presenza un’altra categoria di oggetti dalle caratteristiche peculiari che li rendono un affascinante campo di studio per molteplici ragioni: i Nuclei Galattici Attivi (AGN) (figura 1). Sono abbastanza rari (costituiscono meno dell’1% del totale rispetto alle normali galassie) e dalla vita breve, spesso molto lontani e potenti, ferventi di un’intensa attività che sembra crescere col redshift; si ipotizza perciò che siano giovani e che ci aprano una finestra sul momento successivo al collasso iniziale proprio della vita di ogni galassia, rivelandosi fondamentali per elaborare eventuali teorie cosmologiche. Inoltre, sebbene spesso ospiti di galassie visibili anche in ottico, i loro meccanismi di emissione e gli speciali comportamenti necessitano di analisi e spiegazioni totalmente differenti. Particolare è anche il metodo di rilevamento: per coprire infatti queste determinate frequenze è stata sviluppata una tecnica innovativa capace di dare ottimi risultati, perfino migliori di quelli dei telescopi tradizionali, l’interferometria radio. La tesi si divide in due parti: la prima delinea un ritratto degli AGN, la seconda analizza il flusso proveniente dalla radiogalassia 3C 84 a 15.4 e 43 GHz e ipotizza un possibile sito di origine dell’aumento di brillanza osservato.

Lateral tires characterization: testing, analytical models and applications for aeronautic purpose

The lateral characteristics of tires in terms of lateral forces as a function of sideslip angle is a focal point in the prediction of ground loads and ground handling aircraft behavior. However, tests to validate such coefficients are not mandatory to obtain Aircraft Type Certification and so they are not available for ATR tires. Anyway, some analytical values are implemented in ATR calculation codes (Flight Qualities in-house numerical code and Loads in-house numerical code). Hence, the goal of my work is to further investigate and validate lateral tires characteristics by means of: exploitation and re-parameterization of existing test on NLG tires, implementation of easy-handle model based on DFDR parameters to compute sideslip angles, application of this model to compute lateral loads on existing flight tests and incident cases, analysis of results. The last part of this work is dedicated to the preliminary study of a methodology to perform a test to retrieve lateral tire loads during ground turning with minimum requirements in terms of aircraft test instrumentation. This represents the basis for future works.

Lateral spreading and associated slope processes in fractured rock slabs

Landslides of the lateral spreading type, involving brittle geological units overlying ductile terrains, are a common occurrence in the sandstone and limestone plateaux of the northern Apennines of Italy. These instability phenomena can become particularly risky, when historical towns and cultural heritage sites built on the top of them are endangered. Neverthless, the mechanisms controlling the developing of related instabilities, i.e. toppling and rock falls, at the edges of rock plateaux are not fully understood yet. In addition, the groundwater flow path developing at the contact between the more permeable units, i.e. the jointed rock slab, and the relatively impermeable clay-rich units have not been already studied in details, even if they may play a role in this kind of instability processes, acting as eventual predisposing and/or triggering factors. Field survey, Terrestrial Laser Scanner and Close Range Photogrammetry techniques, laboratory tests on the involved materials, hydrogeological monitoring and modelling, displacements evaluation and stability analysis through continuum and discontinuum numerical codes have been performed on the San Leo case study, with the aim to bring further insights for the understanding and the assessment of the slope processes taking place in this geological context. The current research permitted to relate the aquifer behaviour of the rocky slab to slope instability processes. The aquifer hosted in the fractured slab leads to the development of perennial and ephemeral springs at the contact between the two units. The related piping erosion phenomena, together with slope processes in the clay-shales led to the progressive undermining of the slab. The cliff becomes progressively unstable due to undermining and undergoes large-scale landslides due to fall or topple.

Progetto vhdl di un nucleo di calcolo per misure di impedenza basate su segnali pseudo-random

In questo elaborato si affronta il progetto di un nucleo di calcolo per misure d'impedenza sulla pelle tramite l'utilizzo di segnali pseudo-random. La misura viene effettuata applicando il segnale casuale all'impedenza per ottenere la risposta impulsiva tramite un'operazione di convoluzione. Il nucleo di calcolo è stato implementato in VHDL.

Caratteristiche citoarchitettoniche e neurochimiche del nucleo centrale dell'amigdala di Tursiope (Tursiops truncatus)

Lo studio della sfera emozionale è stato da sempre oggetto d’interesse da parte di molti ambiti della Scienza, nonostante la sua perfetta mappatura costituisca ancora oggi un’ambizione non del tutto raggiunta. Comprendere quale sia il meccanismo specifico di genesi ed elaborazione delle emozioni e quali aree encefaliche ne siano responsabili, costituisce per gli scienziati una sfida di grande interesse. L’importanza dell’Amigdala nello studio e nella comprensione delle emozioni è conseguente alla scoperta di come questa struttura sia responsabile della genesi di un'emozione: la paura. Antica e ben radicata nel percorso evolutivo di ogni specie, la reazione di paura davanti ad un pericolo ha una funzione positiva: protegge da stimoli potenzialmente dannosi e, di base, non si apprende: tutti sono in grado di provare paura. L’Amigdala, denominata anche complesso nucleare amigdaloideo, è una struttura eterogenea, costituita da circa 13 nuclei e localizzata nella parte mediale del lobo temporale. I nuclei amigdaloidei vengono divisi in 3 gruppi: nuclei profondi, nuclei superficiali ed altre aree amigdaloidee. Le caratteristiche citoarchitettoniche e neurochimiche del complesso nucleare amigdaloideo sono state largamente studiate nei Mammiferi terrestri quali: ratto, scimmia, gatto ed Uomo. In letteratura non sono presenti particolari riferimenti ai Mammiferi marini. Per questo motivo la presente ricerca si propone di mostrare le caratteristiche citoarchitettoniche e neurochimiche del nucleo centrale dell’amigdala di tursiope (Tursiops truncatus), con particolare riferimento alle caratteristiche morfometriche dei neuroni esprimenti parvalbumina, calbindina-D28k e calretinina.

Excitability properties of mouse motor axons in the mutant SOD1(G93A) model of amyotrophic lateral sclerosis

Non-invasive excitability studies of motor axons in patients with amyotrophic lateral sclerosis (ALS) have revealed a changing pattern of abnormal membrane properties with disease progression, but the heterogeneity of the changes has made it difficult to relate them to pathophysiology. The SOD1(G93A) mouse model of ALS displays more synchronous motoneuron pathology. Multiple excitability measures of caudal and sciatic nerves in mutant and wild-type mice were compared before onset of signs and during disease progression (4-19 weeks), and they were related to changes in muscle fiber histochemistry. Excitability differences indicated a modest membrane depolarization in SOD1(G93A) axons at about the time of symptom onset (8 weeks), possibly due to deficient energy supply. Previously described excitability changes in ALS patients, suggesting altered sodium and potassium conductances, were not seen in the mice. This suggests that those changes relate to features of the human disease that are not well represented in the animal model.

Lateral ridge augmentation using equine- and bovine-derived cancellous bone blocks: a feasibility study in dogs

OBJECTIVES: The aim of the present study was to histologically evaluate and compare a new prototype collagen type I/III-containing equine- (EB) and a bovine- (BB) derived cancellous bone block in a dog model. MATERIALS AND METHODS: Four standardized box-shaped defects were bilaterally created at the buccal aspect of the alveolar ridge in the lower jaws of five beagle dogs and randomly allocated to either EB or BB. Each experimental site was covered by a native (non-crosslinked) collagen membrane and left to heal in a submerged position for 12 weeks. Dissected blocks were processed for semi-/and quantitative analyses. RESULTS: Both groups had no adverse clinical or histopathological events (i.e. inflammatory/foreign body reactions). BB specimens revealed no signs of biodegradation and were commonly embedded in a fibrous connective tissue. New bone formation and bony graft integration were minimal. In contrast, EB specimens were characterized by a significantly increased cell (i.e. osteoclasts and multinucleated giant cells)-mediated degradation of the graft material (P<0.001). The amount and extent of bone ingrowth was consistently higher in all EB specimens, but failed to reach statistical significance in comparison with the BB group (P>0.05). CONCLUSIONS: It was concluded that the application of EB may not be associated with an improved bone formation than BB.

Radiation dose optimized lateral expansion of the field of view in synchrotron radiation X-ray tomographic microscopy

Volumetric data at micrometer level resolution can be acquired within a few minutes using synchrotron-radiation-based tomographic microscopy. The field of view along the rotation axis of the sample can easily be increased by stacking several tomograms, allowing the investigation of long and thin objects at high resolution. On the contrary, an extension of the field of view in the perpendicular direction is non-trivial. This paper presents an acquisition protocol which increases the field of view of the tomographic dataset perpendicular to its rotation axis. The acquisition protocol can be tuned as a function of the reconstruction quality and scanning time. Since the scanning time is proportional to the radiation dose imparted to the sample, this method can be used to increase the field of view of tomographic microscopy instruments while optimizing the radiation dose for radiation-sensitive samples and keeping the quality of the tomographic dataset on the required level. This approach, dubbed wide-field synchrotron radiation tomographic microscopy, can increase the lateral field of view up to five times. The method has been successfully applied for the three-dimensional imaging of entire rat lung acini with a diameter of 4.1 mm at a voxel size of 1.48 microm.

Differential activation of the lateral premotor cortex during action observation

Background Action observation leads to neural activation of the human premotor cortex. This study examined how the level of motor expertise (expert vs. novice) in ballroom dancing and the visual viewpoint (internal vs. external viewpoint) influence this activation within different parts of this area of the brain. Results Sixteen dance experts and 16 novices observed ballroom dance videos from internal or external viewpoints while lying in a functional magnetic resonance imaging scanner. A conjunction analysis of all observation conditions showed that action observation activated distinct networks of premotor, parietal, and cerebellar structures. Experts revealed increased activation in the ventral premotor cortex compared to novices. An internal viewpoint led to higher activation of the dorsal premotor cortex. Conclusions The present results suggest that the ventral and dorsal premotor cortex adopt differential roles during action observation depending on the level of motor expertise and the viewpoint.

Trigonal and peritrigonal lesions of the lateral ventricle-surgical considerations and outcome analysis of 20 patients

The aim of this study is to review the results and clinical outcome of patients with surgically treated lesions within the trigone of the lateral ventricle. This is a retrospective case series of 20 (eight male, 12 female) patients with lesions of the trigone of the lateral ventricle operated between 1998 and 2008. All lesions were removed via the transcortical temporal and transcortical parietal route. Surgical complications and outcome were assessed using the modified Rankin Scale (mRS). There were four children and 16 adults with a mean age of 42?±?22 years (min?=?1, max?=?74). Eight (40%) lesions grew within the trigone of the dominant hemisphere. In 17 cases, the lesion was purely intraventricular, and in three cases, a slight paraventricular extension was seen. The mean size was 4.5 cm of maximal diameter. Surgical removal was achieved via the transcortical parietal route in 13 cases (65%) and the transcortical temporal route in seven cases (35%). In all cases, complete resection was possible. According to the mRS, 13 patients improved, five remained the same, and two were lost to follow-up. One patient had an increased visual field deficit postoperatively and new hemiparesis and aphasia, but returned to the preoperative level within a few weeks. In one patient, an acute myocardial infarction occurred due to previous cardiac stent placement and in-stent stenosis. Even large trigonal lesions can be resected with low morbidity using a transcortical approach depending on the peritrigonal extension of the tumor.

[Laparoscopic management of genital prolapse by lateral suspension using mesh: a series of 377 patients]

Genital prolapse is frequent and can be found in about 50% of parous women. Its etiology is complex and multifactorial. Predisposing factors include: genetics (connective tissue disorders, family history); general state (age, parity, weight, smoking, obstructive pulmonary disease); trauma (carrying heavy loads, intense physical exercise); or iatrogenic (post hysterectomy). Treatment can be conservative or surgical and depends mainly on the severity of symptoms. Developments in surgical techniques and synthetic material in the last 20 years enabled us to use minimally invasive procedures with improved post operative course and decreased recurrence rates.

Investigation of the Design of a Bistable Micro-Chemical-Mechanical Device Utilizing Lateral Buckling

The Gracias Laboratory at Johns Hopkins University has developed microgrippers which utilize chemically-actuated joints to be used in micro-surgery. These grippers, however, take up to thirty minutes to close fully when activated biochemicals in the human body. This is very problematic and could limit the use of the devices in surgery. It is the goal of this research to develop a gripper that uses theGracias Laboratory's existing joints in conjunction with mechanical components to decrease the closing time. The purpose of including the mechanical components is to induce a state of instability at which time a small perturbation would cause the joint to close fully.The main concept of the research was to use the lateral buckling of a triangular gripper geometry and use a toggle mechanism to decrease the closure time of the device. This would create a snap-action device mimicking the quick closure of a Venus flytrap. All developed geometries were tested using finite element analysis to determine ifloading conditions produced the desired buckled shape. This research examines lateral buckling on the micro-scale and the possibility ofusing this phenomenon in a micro-gripper. Although a final geometry with the required deformed shaped was not found, this document contains suggestions for future geometries that may produce the correct deformed shape. It was determined through this work that in order to obtain the desired deformed shape, polymeric sections need to be added to the geometry. This simplifies the analysis and allows the triangular structure to buckle in the appropriate way due to the added joints. Future work for this project will be completed by undergraduate students at Bucknell University. Fabrication and testing of devices will be done at Johns Hopkins University in the Gracias Laboratory.