Magnetic structure of Li2CuO2: From ab initio calculations to macroscopic simulations

The magnetic structure of the edge-sharing cuprate compound Li2CuO2 has been investigated with highly correlated ab initio electronic structure calculations. The first- and second-neighbor in-chain magnetic interactions are calculated to be 142 and -22 K, respectively. The ratio between the two parameters is smaller than suggested previously in the literature. The interchain interactions are antiferromagnetic in nature and of the order of a few K only. Monte Carlo simulations using the ab initio parameters to define the spin model Hamiltonian result in a Nel temperature in good agreement with experiment. Spin population analysis situates the magnetic moment on the copper and oxygen ions between the completely localized picture derived from experiment and the more delocalized picture based on local-density calculations.

Rigorous characterization of oxygen vacancies in ionic oxides

Charged and neutral oxygen vacancies in the bulk and on perfect and defective surfaces of MgO are characterized as quantum-mechanical subsystems chemically bonded to the host lattice and containing most of the charge left by the removed oxygens. Attractors of the electron density appear inside the vacancy, a necessary condition for the existence of a subsystem according to the atoms in molecules theory. The analysis of the electron localization function also shows attractors at the vacancy sites, which are associated to a localization basin shared with the valence domain of the nearest oxygens. This polyatomic superanion exhibits chemical trends guided by the formal charge and the coordination of the vacancy. The topological approach is shown to be essential to understand and predict the nature and chemical reactivity of these objects. There is not a vacancy but a coreless pseudoanion that behaves as an activated host oxygen.

A new isoform of anti-lipopolysaccharide factor identified from the blue swimmer crab, Portunus pelagicus: Molecular characteristics and phylogeny

Anti-lipopolysaccharide factors are small proteins that bind and neutralize lipopolysaccharide and exhibit potent antimicrobial activities. This study presents the molecular characterization and phylogenetic analysis of the first ALF isoform (Pp-ALF1; JQ745295) identified from the hemocytes of Portunus pelagicus. The full length cDNA of Pp-ALF1 consisted of 880 base pairs encoding 293 amino acids with an ORF of 123 amino acids and contains a putative signal peptide of 24 amino acids. Pp-ALF1 possessed a predicted molecular weight (MW) of 13.86 kDa and theoretical isoelectric point (pI) of 8.49. Two highly conserved cysteine residues and putative LPS binding domain were observed in Pp-ALF1. Peptide model of Pp-ALF1 consisted of two α-helices crowded against a four-strand β-sheet. Comparison of amino acid sequences and neighbor joining tree showed that Pp-ALF1 has a maximum similarity (46%) to ALF present in Portunus trituberculatus followed by 39% similarity to ALF of Eriocheir sinensis and 38% similarity to ALFs of Scylla paramamosain and Scylla serrata. Pp-ALF1 is found to be a new isoform of ALF family and its characteristic similarity with other known ALFs signifies its role in protection against invading pathogens.

The Plurality Strategy on Graphs

The Majority Strategy for finding medians of a set of clients on a graph can be relaxed in the following way: if we are at v, then we move to a neighbor w if there are at least as many clients closer to w than to v (thus ignoring the clients at equal distance from v and w). The graphs on which this Plurality Strategy always finds the set of all medians are precisely those for which the set of medians induces always a connected subgraph

Characterization and applications of two protease enzymes obtained by culture dependent and independent approaches from mangrove sediments

Soil community genomics or metagenomics is employed in this study to analyze the evolutionary related - ness of mangrove microbial community. The metagenomic DNA was isolated from mangrove sediment and 16SrDNA was amplified using universal primers. The amplicons were ligated into pTZ57R/T cloning vector and transformed onto E. coli JM109 host cells. The recombinant plasmids were isolated from positive clones and the insert was confirmed by its reamplification. The amplicons were subjected to Amplified Ribosomal DNA Restriction Analysis (ARDRA) using three different tetra cutter restriction enzymes namely Sau3A1, Hha1 and HpaII. The 16SrDNA insert were sequenced and their identity was determined. The sequences were submitted to NCBI database and accession numbers obtained. The phylo - genetic tree was constructed based on Neighbor-Joining technique. Clones belonged to two major phyla of the bacterial domain, namely Firmicutes and Proteobacteria, with members of Firmicutes predominating. The microbial diversity of the mangrove sediment was explored in this manner.

Einfluss der Flächenwahl, Anbaudichte und Landschaftsstruktur auf den Befallsstatus und die Ausbreitung der Möhrenfliege Psila rosae F. (Diptera: Psilidae) im ökologischen Möhrenanbau

Durch die vermehrte Nachfrage von Biomöhren im Lebensmitteleinzelhandel ist die Anbaufläche ökologisch erzeugter Möhren in den letzten zehn Jahren deutlich angestiegen. Der Anbau konzentriert sich auf bestimmte Regionen und erfolgte damit zunehmend auf großen Schlägen in enger räumlicher und zeitlicher Abfolge. Mit der steigenden Wirtspflanzenpräsenz steigt auch der Befallsdruck durch die Möhrenfliege. Während der Schädling im konventionellen Anbau mit Insektiziden kontrolliert wird, stehen dem Ökologischen Landbau bisher keine direkten Regulative zur Verfügung. Ziel der Untersuchungen war es, unter den Praxisbedingungen des ökologischen Möhrenanbaus einzelbetriebliche und überregionale Muster beteiligter Risikofaktoren im Befallsgeschehen zu identifizieren und so Möglichkeiten einer verbesserten Prävention und Regulation aufzuzeigen. Über einen Zeitraum von drei Jahren wurden auf fünf Betrieben in Niedersachsen und Hessen umfangreiche Felddaten erhoben und diese unter Verwendung von GIS – Software und dem Simulationsmodell SWAT analysiert. Untersuchte Einflussgrößen umfassten (1) die Distanz zu vorjährigen Möhrenfeldern, (2) die zeitliche Möhrenanbauperiode, (3) Vegetationselemente und (4) der experimentelle Einsatz von Fangpflanzen zur Unterdrückung der Fliegenentwicklung. Unter der Berücksichtigung deutlicher einzelbetrieblicher Unterschiede sind die wichtigsten Ergebnisse der Studie wie folgt zu benennen: (1) Auf Betrieben mit Befall im zurückliegenden Anbaujahr zeigte sich die Distanz zu vorjährigen Möhrenfeldern als der wichtigste Risikofaktor. Das Ausbreitungsverhalten der 1. Generation Möhrenfliege erwies sich zudem als situationsgebunden anpassungsfähig. Fliegensumme und Befall waren jeweils in dem zu Vorjahresflächen nächstgelegen Feld am größten, während jeweils dahinter liegende Möhrenschläge entsprechend weniger Fliegenzahlen und Befall auswiesen. Aus den Ergebnissen wird als vorrangige Verbreitungskapazität der 1. Generation Möhrenfliegen innerhalb von 1000 m abgeleitet. (2) Betriebe mit kontinuierlicher Möhren - Anbaubauperiode (ca. April – Oktober), die langfristig die Entwicklung sowohl der 1. als auch der 2. Generation Fliegen unterstützten, verzeichneten stärkere Fliegenprobleme. Hinsichtlich einer verbesserten Prävention wird empfohlen mit einer strikten räumlichen Trennung früher und später Sätze ein Aufschaukeln zwischen den Generationen zu vermeiden. (3) Der Einfluss der Vegetation ließ sich weniger eindeutig interpretieren. Einzelbetriebliche Hinweise, dass Kleingehölze (Hecken und Bäume) im Radius zwischen aktueller und vorjähriger Möhrenfläche die Befallswahrscheinlichkeit erhöhen, konnten mit einem berechneten Gesamtmaß für die regionale holzige Vegetation nicht bestätigt werden. Der großräumigen holzigen Vegetation wird im Vergleich zur Feldrandvegetation daher beim Befallsgeschehen eine geringe Bedeutung zugeschrieben. (4) Drei Meter (vier Dämme) breiter Möhren – Fangstreifen auf den vorjährigen Möhrenfeldern eignen sich bereits ab dem Keimblattstadium, um erhebliches Befallspotential zu binden. Eine mechanische Entfernung der Fangpflanzen (Grubbern) mitsamt dem Befallspotential erzielte in 2008 eine 100 %-ige Unterdrückung der Möhrenfliegenentwicklung, in 2009 jedoch nur zu maximal 41 %. Als mögliche Synthese der Ergebnisse zur Ausbreitung der Möhrenfliegen im Frühjahr und zur zeitlichen Koinzidenz mit der Möhrenentwicklung wird als Empfehlung diskutiert, mit Hilfe einer angepassten Flächenwahl die Fliegenausbreitung räumlich an frühen Sätzen zu binden, um entsprechend befallsarme Regionen für entfernt liegende späte (empfindlichere) Möhrensätze zu schaffen.

Understanding Recreational Services of Urban Riverfront Space for Planning Purposes

In the process of urbanization, natural and semi-natural landscapes are increasingly cherished as open space and recreational resource. Urban rivers are part of this kind of resource and thus play an important role in managing urban resilience and health. Employing the example of Tianjin, this doctoral dissertation research aims at learning to understand how to plan and design for the interface zones between urban water courses and for the land areas adjacent to such water courses. This research also aims at learning how to link waterfront space with other urban space in order to make a recreational space system for the benefit of people. Five questions of this dissertation are: 1) what is the role of rivers in spatial and open space planning? 2) What are the human needs regarding outdoor open space? 3) How do river and water front spatial structures affect people's recreational activities? 4) How to define the recreational service of urban river and waterfront open space? 5) How might answering these question change planning and design of urban open space? Quantitative and qualitative empirical approaches were combined in this study for which literature review and theoretical explorations provide the basis. Empirical investigations were conducted in the city of Tianjin. The quantitative approach includes conducting 267 quantitative interviews, and the qualitative approach includes carrying out field observations and mappings. GIS served to support analysis and visualization of empirical information that was generated through this study. By responding to the five research questions, findings and lessons include the following: 1) In the course of time rivers have gained importance in all levels and scales of spatial planning and decision making. Regarding the development of ecological networks, mainly at national scale, rivers are considered significant linear elements. Regarding regional and comprehensive development, river basins and watersheds are often considered as the structural link for strategic ecological, economic, social and recreational planning. For purposes of urban planning, particularly regarding recreational services in cities, the distribution of urban open spaces often follows the structure of river systems. 2) For the purpose of classifying human recreational needs that relate to outdoor open space Maslow's hierarchy of human needs serves as theoretical basis. The classes include geographical, safety, physiological, social and aesthetic need. These classes serve as references while analyzing river and waterfront open space and other kinds of open space. 3) Regarding the question how river and waterfront spatial structures might affect people's recreational activities, eight different landscape units were identified and compared in the case study area. Considering the thermal conditions of Tianjin, one of these landscape units was identified as affording the optimal spatial arrangement which mostly meets recreational needs. The size and the shape of open space, and the plants present in an open space have been observed as being most relevant regarding recreational activities. 4) Regarding the recreational service of urban river and waterfront open space the results of this research suggest that the recreational service is felt less intensively as the distances between water 183 front and open space user’s places of residence are increasing. As a method for estimating this ‘Service Distance Effect’ the following formula may be used: Y = a*ebx. In this equation Y means the ‘Service Distance’ between homes and open space, and X means the percentage of the people who live within this service distance. Coefficient "a" represents the distance of the residential area nearest to the water front. The coefficient "b" is a comprehensive capability index that refers to the size of the available and suitable recreational area. 5) Answers found to the questions above have implications for the planning and design of urban open space. The results from the quantitative study of recreational services of waterfront open space were applied to the assessment of river-based open space systems. It is recommended that such assessments might be done employing the network analysis function available with any GIS. In addition, several practical planning and designing suggestions are made that would help remedy any insufficient base for satisfying recreational needs. The understanding of recreational need is considered helpful for the proposing planning and designing ideas and for the changing of urban landscapes. In the course of time Tianjin's urban water system has shrunk considerably. At the same time rivers and water courses have shaped Tianjin's urban structure in noticeable ways. In the process of urbanization water has become increasingly important to the citizens and their everyday recreations. Much needs to be changed in order to improve recreational opportunities and to better provide for a livable city, most importantly when considering the increasing number of old people. Suggestions made that are based on results of this study, might be implemented in Tianjin. They are 1) to promote the quality of the waterfront open space and to make all linear waterfront area accessible recreational spaces. Then, 2), it is advisable to advocate the concept of green streets and to combine green streets with river open space in order to form an everyday recreational network. And 3) any sound urban everyday recreational service made cannot rely on only urban rivers; the whole urban structure needs to be improved, including adding small open space and optimize the form of urban communities, finally producing a multi-functional urban recreational network.

Heat stress response for physiological traits in dairy and dual purpose cattle populations on phenotypic and genetic scales

The main objective of this thesis was to determine the potential impact of heat stress (HS) on physiological traits of lactating cows and semen quality of bulls kept in a temperate climate. The thesis is comprised of three studies. An innovative statistical modeling aspect common to all three studies was the application of random regression methodology (RRM) to study the phenotypic and genetic trajectory of traits in dependency of a continuous temperature humidity index (THI). In the first study, semen quality and quantity traits of 562 Holstein sires kept on an AI station in northwestern Germany were analyzed in the course of THI calculated from data obtained from the nearest weather station. Heat stress was identified based on a decline in semen quality and quantity parameters. The identified general HS threshold (THI = 60) and the thermoneutal zone (THI in the range from 50 to 60) for semen production were lower than detected in studies conducted in tropical and subtropical climates. Even though adult bulls were characterized by higher semen productivity compared to younger bulls, they responded with a stronger semen production loss during harsh environments. Heritabilities (low to moderate range) and additive genetic variances of semen characteristics varied with different levels of THI. Also, based on genetic correlations genotype, by environment interactions were detected. Taken together, these findings suggest the application of specific selection strategies for specific climate conditions. In the second study, the effect of the continuous environmental descriptor THI as measured inside the barns on rectal temperatures (RT), skin temperatures (ST), vaginal temperatures (VT), respiration rates (RR), and pulse rate (PR) of lactating Holstein Friesian (HF) and dual-purpose German black pied cattle (DSN) was analyzed. Increasing HS from THI 65 (threshold) to THI 86 (maximal THI) resulted in an increase of RT by 0.6 °C (DSN) and 1 °C (HF), ST by 3.5 °C (HF) and 8 °C (DSN), VT by 0.3 °C (DSN), and RR by 47 breaths / minute (DSN), and decreased PR by 7 beats / minute (DSN). The undesired effects of rising THI on physiological traits were most pronounced for cows with high levels of milk yield and milk constituents, cows in early days in milk and later parities, and during summer seasons in the year 2014. In the third study of this dissertation, the genetic components of the cow’s physiological responses to HS were investigated. Heat stress was deduced from indoor THI measurements, and physiological traits were recorded on native DSN cows and their genetically upgraded crosses with Holstein Friesian sires in two experimental herds from pasture-based production systems reflecting a harsh environment of the northern part of Germany. Although heritabilities were in a low range (from 0.018 to 0.072), alterations of heritabilities, repeatabilities, and genetic components in the course of THI justify the implementation of genetic evaluations including heat stress components. However, low repeatabilities indicate the necessity of using repeated records for measuring physiological traits in German cattle. Moderate EBV correlations between different trait combinations indicate the potential of selection for one trait to simultaneously improve the other physiological attributes. In conclusion, bulls of AI centers and lactating cows suffer from HS during more extreme weather conditions also in the temperate climate of Northern Germany. Monitoring physiological traits during warm and humid conditions could provide precious information for detection of appropriate times for implementation of cooling systems and changes in feeding and management strategies. Subsequently, the inclusion of these physiological traits with THI specific breeding values into overall breeding goals could contribute to improving cattle adaptability by selecting the optimal animal for extreme hot and humid conditions. Furthermore, the recording of meteorological data in close distance to the cow and visualizing the surface body temperature by infrared thermography techniques might be helpful for recognizing heat tolerance and adaptability in cattle.

Populationsgenetische Fragmentanalyse von europäischen Heterobasidion annosum s. s.-Stämmen

Die fünf Arten des Heterobasidion annosum s. l.-Komplexes sind in Nordamerika und Eurasien dafür bekannt große Schäden in Nadelforsten zu verursachen. In Deutschland sind mit H. annsosum s. s., H. parviporum und H. abietinum alle drei eurasischen Weißfäuleerreger sympatrisch vertreten. Besonders in der Norddeutschen Tiefebene fallen H. annsoums s. s.-Stämme durch ansteigende Befallsherde und hohe Pathogenität auf. Seit Jahren untersucht die Nordwestdeutsche forstliche Versuchsanstalt (NW-FVA) Göttingen die Zusammenhänge der sogenannte „Ackersterbe“ in einzelnen Regionen. In diesem Zusammenhang sollte die vorliegende Arbeit den molekular-genetischen Aspekt behandeln und die inner- und zwischenartlichen Strukturen sowie das Beziehungsgefüge von H. annosum s. s. und H. parviporum-Individuen aus 18 europäischen Ländern darstellen. Für die molekularen Untersuchungen wurde die AFLP-Analyse (amplified fragment length polymorphism) ausgewählt. Die Vorteile der AFLP liegen in der großen Anzahl polymorpher und selektionsneutraler Marker, der guten Reproduzierbarkeit und der damit verbundenen Robustheit dieser Methode. Basierend auf acht AFLP-Primerpaarkombinationen mit 209 Individuen wurde eine binäre Matrix erstellt. Diese bildete die Grundlage für die molekulargenetischen Analysen und folgende Fragestellungen: Können die Heterobasidion-Individuen in Netzwerk- und Dendrogramm-Analysen den herkunftsspezifischen Populationen zugeordnet werden und lässt sich ein geografisches Muster erkennen? Wie groß ist das Ausmaß der genetischen Diversität innerhalb und zwischen den untersuchten europäischen Heterobasidion annosum s. l.-Populationen? Ist das gesteigerte Schadbild in der norddeutschen Tiefebene auf eine mögliche invasive Heterobasidion-Art zurückzuführen? Wie sieht die Populationsstruktur von Heterobasidion annosum s. l. in Europa bzw. Deutschland aus und gibt es Hinweise auf Subpopulationen oder Hybridisierungsereignisse? Die von der AFLP-Analyse erzeugten 888 informativen Marker wurden in Neighbor-Joining- und UPGMA-Phänogrammen, Median-joining Netzwerk und einem Principal coordinates analysis (PCoA)-Koordinatensystem dargestellt. Übereinstimmend zeigten sich die Arten H. annosum und H. parviporum eindeutig distinkt. Die Boostrapunterstützung der meisten H. annosum s. s.-Individuen erwies sich jedoch innerartlich als überwiegend schwach. Häufig kam es zu Gruppierungen der Individuen gemäß ihrer regionalen Herkunft. Seltener bildeten die Populationen gemeinsame Cluster entsprechend ihrer Länderzugehörigkeit. Eine zonale Gruppierungsstruktur der Individuen nach Süd-, Mittel-, und Nordeuropa konnte in keiner Analyse beobachtet werden. Mit der Analysis of Molecular Variance (AMOVA) wurde mit der AFLP-Methode eine genetische Varianz zwischen den beiden untersuchten Arten von 72 % nachgewiesen. Intraspezifisch ließ H. annosum s. s eine sehr hohe genetische Varianz innerhalb der Populationen (73%) und eine geringe Differenzierung zwischen diesen erkennen. Lediglich die deutschen Populationen zeigten eine gewisse Abgrenzung zueinander (33%). Als Ursache für die hohe individuelle genetische Vielfalt wird zum Einen das dichte Vorkommen der H. annosum s. s.- Wirte in Europa angesehen. Darüber hinaus sind gebietsfremde Sporeneinträge durch überregionale Forstarbeiten, globale Holzimporte und die für H. annosum s. s. nachgewiesenen weiten Sporenflüge zu erklären. Das Populationsannahmemodell von STRUCTURE generierte für den Datensatz beider Arten eine optimale Populationsanzahl von ΔK=4. Drei der Subpopulationen wurden H. annosum s. s. zugeordnet. Eine Korrelation dieser genetischen Cluster mit ihrem geografischen Ursprung oder der Wirtsbaumart war nicht feststellbar. Ein möglicher Zusammenhang der Subpopulationen mit weiteren ökologischen Parametern wie z. B. Substratgrundlage, Pathogenität, Sporulationsverhalten und sich änderte klimatische Umweltbedingungen konnten in dieser Studie nicht untersucht werden. Des Weiteren zeigte die STRUCTURE-Analyse, dass einige H. parviorum-Individuen Anteile eines H. annosum s. s.-Clusters führten. Um zu klären, ob es sich hierbei um einen erebten und konservierten Polymorphisums, oder um Introgression handelt, wären weiterführende Analysen notwendig.

People Recognition in Image Sequences by Supervised Learning

We describe a system that learns from examples to recognize people in images taken indoors. Images of people are represented by color-based and shape-based features. Recognition is carried out through combinations of Support Vector Machine classifiers (SVMs). Different types of multiclass strategies based on SVMs are explored and compared to k-Nearest Neighbors classifiers (kNNs). The system works in real time and shows high performance rates for people recognition throughout one day.

Multiclass Classification of SRBCTs

A novel approach to multiclass tumor classification using Artificial Neural Networks (ANNs) was introduced in a recent paper cite{Khan2001}. The method successfully classified and diagnosed small, round blue cell tumors (SRBCTs) of childhood into four distinct categories, neuroblastoma (NB), rhabdomyosarcoma (RMS), non-Hodgkin lymphoma (NHL) and the Ewing family of tumors (EWS), using cDNA gene expression profiles of samples that included both tumor biopsy material and cell lines. We report that using an approach similar to the one reported by Yeang et al cite{Yeang2001}, i.e. multiclass classification by combining outputs of binary classifiers, we achieved equal accuracy with much fewer features. We report the performances of 3 binary classifiers (k-nearest neighbors (kNN), weighted-voting (WV), and support vector machines (SVM)) with 3 feature selection techniques (Golub's Signal to Noise (SN) ratios cite{Golub99}, Fisher scores (FSc) and Mukherjee's SVM feature selection (SVMFS))cite{Sayan98}.

A Factor analysis of hidrochemical composition of Llobregat river basin

Hydrogeological research usually includes some statistical studies devised to elucidate mean background state, characterise relationships among different hydrochemical parameters, and show the influence of human activities. These goals are achieved either by means of a statistical approach or by mixing models between end-members. Compositional data analysis has proved to be effective with the first approach, but there is no commonly accepted solution to the end-member problem in a compositional framework. We present here a possible solution based on factor analysis of compositions illustrated with a case study. We find two factors on the compositional bi-plot fitting two non-centered orthogonal axes to the most representative variables. Each one of these axes defines a subcomposition, grouping those variables that lay nearest to it. With each subcomposition a log-contrast is computed and rewritten as an equilibrium equation. These two factors can be interpreted as the isometric log-ratio coordinates (ilr) of three hidden components, that can be plotted in a ternary diagram. These hidden components might be interpreted as end-members. We have analysed 14 molarities in 31 sampling stations all along the Llobregat River and its tributaries, with a monthly measure during two years. We have obtained a bi-plot with a 57% of explained total variance, from which we have extracted two factors: factor G, reflecting geological background enhanced by potash mining; and factor A, essentially controlled by urban and/or farming wastewater. Graphical representation of these two factors allows us to identify three extreme samples, corresponding to pristine waters, potash mining influence and urban sewage influence. To confirm this, we have available analysis of diffused and widespread point sources identified in the area: springs, potash mining lixiviates, sewage, and fertilisers. Each one of these sources shows a clear link with one of the extreme samples, except fertilisers due to the heterogeneity of their composition. This approach is a useful tool to distinguish end-members, and characterise them, an issue generally difficult to solve. It is worth note that the end-member composition cannot be fully estimated but only characterised through log-ratio relationships among components. Moreover, the influence of each endmember in a given sample must be evaluated in relative terms of the other samples. These limitations are intrinsic to the relative nature of compositional data

Compositional analysis of bivariate discrete probabilities

A joint distribution of two discrete random variables with finite support can be displayed as a two way table of probabilities adding to one. Assume that this table has n rows and m columns and all probabilities are non-null. This kind of table can be seen as an element in the simplex of n · m parts. In this context, the marginals are identified as compositional amalgams, conditionals (rows or columns) as subcompositions. Also, simplicial perturbation appears as Bayes theorem. However, the Euclidean elements of the Aitchison geometry of the simplex can also be translated into the table of probabilities: subspaces, orthogonal projections, distances. Two important questions are addressed: a) given a table of probabilities, which is the nearest independent table to the initial one? b) which is the largest orthogonal projection of a row onto a column? or, equivalently, which is the information in a row explained by a column, thus explaining the interaction? To answer these questions three orthogonal decompositions are presented: (1) by columns and a row-wise geometric marginal, (2) by rows and a columnwise geometric marginal, (3) by independent two-way tables and fully dependent tables representing row-column interaction. An important result is that the nearest independent table is the product of the two (row and column)-wise geometric marginal tables. A corollary is that, in an independent table, the geometric marginals conform with the traditional (arithmetic) marginals. These decompositions can be compared with standard log-linear models. Key words: balance, compositional data, simplex, Aitchison geometry, composition, orthonormal basis, arithmetic and geometric marginals, amalgam, dependence measure, contingency table

Estudio de prospectiva : Adornos FAMEGO al año 2015

El Almacén de Adornos FAMEGO, ubicado dentro del sector de San Victorino, el cual a través de los años se ha caracterizado por ser muy concurrente por las familias Colombianas de los estratos 1, 2 y 3, gracias a que su ubicación en el centro de la capital hace sea que el destino más próximo para aquellos consumidores finales de Adornos, que su principal objetivo es buscar el mejor precio en sus insumos para confección.Mediante el estudio prospectivo del Almacén FAMEGO, se analizaron características como: tendencias (Globalización, nuevos concepto del mercado, tasa de cambio), factores internos y externos (Precios, seguridad, población marginal), los cuales llevaron a generar hipótesis que mostraran los distintos escenarios del Almacén FAMEGO con un horizonte al año en el 2015. En el 2015, el sector de San Victorino, se vislumbra como un centro de negocios al aire libre, en el cual habrá un ambiente más confortable para todos los clientes, con mayor seguridad por parte de las autoridades y control en cuanto al desarrollo sostenible del sector, brindando adecuados niveles de limpieza en las calles y una menor contaminación visual. El almacén FAMEGO, caracterizado por brindar a sus clientes el mejor servicio, ha creado alianzas con sus principales competidores para crear un ambiente más sano en el mercado, estableciendo una equidad en los precios de los productos.

Admission Control for TCP Flows Using Packet Classes and Edge-to-edge Measurements of Aggregates

TCP flows from applications such as the web or ftp are well supported by a Guaranteed Minimum Throughput Service (GMTS), which provides a minimum network throughput to the flow and, if possible, an extra throughput. We propose a scheme for a GMTS using Admission Control (AC) that is able to provide different minimum throughput to different users and that is suitable for "standard" TCP flows. Moreover, we consider a multidomain scenario where the scheme is used in one of the domains, and we propose some mechanisms for the interconnection with neighbor domains. The whole scheme uses a small set of packet classes in a core-stateless network where each class has a different discarding priority in queues assigned to it. The AC method involves only edge nodes and uses a special probing packet flow (marked as the highest discarding priority class) that is sent continuously from ingress to egress through a path. The available throughput in the path is obtained at the egress using measurements of flow aggregates, and then it is sent back to the ingress. At the ingress each flow is detected using an implicit way and then it is admission controlled. If it is accepted, it receives the GMTS and its packets are marked as the lowest discarding priority classes; otherwise, it receives a best-effort service. The scheme is evaluated through simulation in a simple "bottleneck" topology using different traffic loads consisting of "standard" TCP flows that carry files of varying sizes