Manufacturing techniques and surface engineering of polymer based nanoparticles for targeted drug delivery to cancer

The evolution of polymer based nanoparticles as a drug delivery carrier via pharmaceutical nano/microencapsulation has greatly promoted the development of nano- and micro-medicine in the past few decades. Poly(lactide-co-glycolide) (PLGA) and chitosan, which are biodegradable and biocompatible polymers, have been approved by both the Food & Drug Administration (FDA) and European Medicine Agency (EMA), making them ideal biomaterials that can be advanced from laboratory development to clinical oral and parental administrations. PLGA and chitosan encapsulated nanoparticles (NPs) have successfully been developed as new oral drug delivery systems with demonstrated high efficacy. This review aims to provide a comprehensive overview of the fabrication of PLGA and chitosan particulate systems using nano/microencapsulation methods, the current progress and the future outlooks of the nanoparticulate drug delivery systems. Especially, we focus on the formulations and nano/micro-encapsulation techniques using top-down techniques. It also addresses how the different phases including the organic and aqueous ones in the emulsion system interact with each other and subsequently influence the properties of the drug delivery system. Besides, surface modification strategies which can effectively engineer intrinsic physicochemical properties are summarised. Finally, future perspectives and potential directions of PLGA and chitosan nano/microencapsulated drug systems are outlined.

Plasmon-enhanced two-photon-induced isomerization for highly-localized light-based actuation of inorganic/organic interfaces

Two-photon initiated photo-isomerization of an azobenzene moiety adsorbed on silver nanoparticles (Ag NPs) is demonstrated. The azobenzene is linked to a materials-binding peptide that brings it into intimate contact with the Ag NP surface, producing a dramatic enhancement of its two-photon absorbance. An integrated modeling approach, combining advanced conformational sampling with Quantum Mechanics/Capacitance Molecular Mechanics and response theory, shows that charge transfer and image charges in the Ag NP generate local fields that enhance two-photon absorption of the cis isomer, but not the trans isomer, of adsorbed molecules. Moreover, dramatic local field enhancement is expected near the localized surface plasmon resonance (LSPR) wavelength, and the LSPR band of the Ag NPs overlaps the azobenzene absorbance that triggers cis to trans switching. As a result, the Ag NPs enable two-photon initiated cis to trans isomerization, but not trans to cis isomerization. Confocal anti-Stokes fluorescence imaging shows that this effect is not due to local heating, while the quadratic dependence of switching rate on laser intensity is consistent with a two-photon process. Highly localized two-photon initiated switching could allow local manipulation near the focal point of a laser within a 3D nanoparticle assembly, which cannot be achieved using linear optical processes.

Sunlight-induced coloration of silk

Silk fabrics were colored by gold nanoparticles (NPs) that were in situ synthesized through the induction of sunlight. Owing to the localized surface plasmon resonance (LSPR) of gold NPs, the treated silk fabrics presented vivid colors. The photo-induced synthesis of gold NPs was also realized on wet silk through adsorbing gold ions out of solution, which provides a water-saving coloration method for textiles. Besides, the patterning of silk was feasible using this simple sunlight-induced coloration approach. The key factors of coloration including gold ion concentration, pH value, and irradiation time were investigated. Moreover, it was demonstrated that either ultraviolet (UV) light or visible light could induce the generation of gold NPs on silk fabrics. The silk fabrics with gold NPs exhibited high light resistance including great UV-blocking property and excellent fastness to sunlight.

Use of optical interferometry to measure gold nanoparticle adsorption on silica

Adsorption of metal nanoparticles is at the heart of many chemical and biosensor techniques, but there are few approaches that can provide quantitative characterisation of individual nanoparticle films fabricated at different times and/or under different conditions. Using synthesised gold nanoparticles (Au NPs) as a model, the nanoparticle films were investigated using an optical interferometry technique known as fringes of equal chromatic order (FECO), which was further systematically validated against both in situ quartz crystal microbalance (QCM) and ex situ atomic force microscopy (AFM) measurements. The results indicate that the FECO wavelengths has a quantifiable red shift with increasing particle densities, making it possible to quantify the degree of surface coverage via the analysis of the fringe shift at a fixed fringe order. Moreover, the calculated formula between the FECO shifts and the surface coverage allows quantitative analysis of the whole adsorption kinetics investigated. Particularly, the as-proposed FECO technique can successfully monitor the Au NP adsorption in situ, which could be a new versatile technology platform for “online” monitoring method, for example in biosensor applications using Au NP-tagged analytes.

Protection of silica-coated ZnO nanoparticles on pre-dyed polyester fabrics against photofading

This work was designed to investigate the ability of silica-coated ZnO (ZnO&SiO2) nanoparticles (NPs) as ultraviolet (UV) absorbers for protecting pre-dyed polyester fabrics against photofading. Despite that ZnO NPs are excellent UV absorbers, their strong photocatalytic activity limits the application in UV protection. In this study, a silica layer was coated onto ZnO NPs to form a physical barrier between the ZnO and a polyester substrate, which allowed effective UV shielding while minimising the harmful effects of photocatalytic activity on the substrate. The structure and optical proprieties of ZnO&SiO2 NPs were observed. The bare ZnO and ZnO&SiO2 NPs were, respectively, applied to polyester fabrics coloured with three kinds of dyes by a dip coating method. The photofading level of treated fabrics after exposure under simulated sunlight was evaluated. The ZnO&SiO2 NPs exhibited excellent protection on pre-dyed polyester fabrics against photofading.

SYSTEM DYNAMICS MODELING AS A QUANTITATIVE-QUALITATIVE FRAMEWORK FOR SUSTAINABLE WATER RESOURCES MANAGEMENT: INSIGHTS FOR WATER QUALITY POLICY IN THE GREAT LAKES REGION

Early water resources modeling efforts were aimed mostly at representing hydrologic processes, but the need for interdisciplinary studies has led to increasing complexity and integration of environmental, social, and economic functions. The gradual shift from merely employing engineering-based simulation models to applying more holistic frameworks is an indicator of promising changes in the traditional paradigm for the application of water resources models, supporting more sustainable management decisions. This dissertation contributes to application of a quantitative-qualitative framework for sustainable water resources management using system dynamics simulation, as well as environmental systems analysis techniques to provide insights for water quality management in the Great Lakes basin. The traditional linear thinking paradigm lacks the mental and organizational framework for sustainable development trajectories, and may lead to quick-fix solutions that fail to address key drivers of water resources problems. To facilitate holistic analysis of water resources systems, systems thinking seeks to understand interactions among the subsystems. System dynamics provides a suitable framework for operationalizing systems thinking and its application to water resources problems by offering useful qualitative tools such as causal loop diagrams (CLD), stock-and-flow diagrams (SFD), and system archetypes. The approach provides a high-level quantitative-qualitative modeling framework for "big-picture" understanding of water resources systems, stakeholder participation, policy analysis, and strategic decision making. While quantitative modeling using extensive computer simulations and optimization is still very important and needed for policy screening, qualitative system dynamics models can improve understanding of general trends and the root causes of problems, and thus promote sustainable water resources decision making. Within the system dynamics framework, a growth and underinvestment (G&U) system archetype governing Lake Allegan's eutrophication problem was hypothesized to explain the system's problematic behavior and identify policy leverage points for mitigation. A system dynamics simulation model was developed to characterize the lake's recovery from its hypereutrophic state and assess a number of proposed total maximum daily load (TMDL) reduction policies, including phosphorus load reductions from point sources (PS) and non-point sources (NPS). It was shown that, for a TMDL plan to be effective, it should be considered a component of a continuous sustainability process, which considers the functionality of dynamic feedback relationships between socio-economic growth, land use change, and environmental conditions. Furthermore, a high-level simulation-optimization framework was developed to guide watershed scale BMP implementation in the Kalamazoo watershed. Agricultural BMPs should be given priority in the watershed in order to facilitate cost-efficient attainment of the Lake Allegan's TP concentration target. However, without adequate support policies, agricultural BMP implementation may adversely affect the agricultural producers. Results from a case study of the Maumee River basin show that coordinated BMP implementation across upstream and downstream watersheds can significantly improve cost efficiency of TP load abatement.

Multifunctional Nanoparticles in Cancer: in vitro Characterization, in vivo Distribution

A novel biocompatible and biodegradable polymer, termed poly(Glycerol malate co-dodecanedioate) (PGMD), was prepared by thermal condensation method and used for fabrication of nanoparticles (NPs). PGMD NPs were prepared using the single oil emulsion technique and loaded with an imaging/hyperthermia agent (IR820) and a chemotherapeutic agent (doxorubicin, DOX). The size of the void PGMD NPs, IR820-PGMD NPs and DOX-IR820-PGMD NPs were approximately 90 nm, 110 nm, and 125 nm respectively. An acidic environment (pH=5.0) induced higher DOX and IR820 release compared to pH=7.4. DOX release was also enhanced by exposure to laser, which increased the temperature to 42°C. Cytotoxicity of DOX-IR820-PGMD NPs was comparable in MES-SA but was higher in Dx5 cells compared to free DOX plus IR820 (pIn vivomouse studies showed that NP formulation significantly improved the plasma half-life of IR820 after tail vein injection. Significant lower IR820 content was observed in kidney in DOX-IR820-PGMD NP treatment as compared to free IR820 treatment in our biodistribution studies (p

Patterns of psychotropic prescribing and polypharmacy in older hospitalized patients in Ireland: the influence of dementia on prescribing

Neuropsychiatric Symptoms (NPS) are ubiquitous in dementia and are often treated pharmacologically. The objectives of this study were to describe the use of psychotropic, anti-cholinergic, and deliriogenic medications and to identify the prevalence of polypharmacy and psychotropic polypharmacy, among older hospitalized patients in Ireland, with and without dementia. All older patients (≥ 70 years old) that had elective or emergency admissions to six Irish study hospitals were eligible for inclusion in a longitudinal observational study. Of 676 eligible patients, 598 patients were recruited and diagnosed as having dementia, or not, by medical experts. These 598 patients were assessed for delirium, medication use, co-morbidity, functional ability, and nutritional status. We conducted a retrospective cross-sectional analysis of medication data on admission for 583/598 patients with complete medication data, and controlled for age, sex, and co-morbidity. Of 149 patients diagnosed with dementia, only 53 had a previous diagnosis. At hospital admission, 458/583 patients experienced polypharmacy (≥ 5 medications). People with dementia (PwD) were significantly more likely to be prescribed at least one psychotropic medication than patients without dementia (99/147 vs. 182/436; p < 0.001). PwD were also more likely to experience psychotropic polypharmacy (≥ two psychotropics) than those without dementia (54/147 vs. 61/436; p < 0.001). There were no significant differences in the prescribing patterns of anti-cholinergics (23/147 vs. 42/436; p = 0.18) or deliriogenics (79/147 vs. 235/436; p = 0.62). Polypharmacy and psychotropic drug use is highly prevalent in older Irish hospitalized patients, especially in PwD. Hospital admission presents an ideal time for medication reviews in PwD.

TESE = Governança e Satisfação: um estudo nos APLs Têxtil e de Confecções e Moveleiro do Grande ABC

Tese apresentada ao Programa de Pós-Graduação em Administração da Universidade Municipal de São Caetano do Sul como requisito para a obtenção do título de Doutora em Administração.

Uptake and toxicity of copper oxide nanoparticles in C6 glioma cells

Copper oxide nanoparticles (CuO-NPs) are frequently used for many technical applications, but are also known for their cell toxic potential. In order to investigate a potential use of CuO-NPs as a therapeutic drug for glioma treatment, we have investigated the consequences of an application of CuO-NPs on the cellular copper content and cell viability of C6 glioma cells. CuO-NPs were synthesized by a wet-chemical method and were coated with dimercaptosuccinic acid and bovine serum albumin to improve colloidal stability in physiological media. Application of these protein-coated nanoparticles (pCuO-NPs) to C6 cells caused a strong time-, concentration- and temperature-dependent copper accumulation and severe cell death. The observed loss in cellular MTT-reduction capacity, the loss in cellular LDH activity and the increase in the number of propidium iodide-positive cells correlated well with the specific cellular copper content. C6 glioma cells were less vulnerable to pCuO-NPs compared to primary astrocytes and toxicity of pCuO-NPs to C6 cells was only observed for incubation conditions that increased specific cellular copper contents above 20 nmol copper per mg protein. Both cellular copper accumulation as well as the pCuO-NP-induced toxicity in C6 cells were prevented by application of copper chelators, but not by endocytosis inhibitors, suggesting that liberation of copper ions from the pCuO-NPs is the first step leading to the observed toxicity of pCuO-NP-treated glioma cells.

Revêtement intelligent à base des silices mésoporeuses fonctionnalisées pour le relargage stimulé d’agents antimicrobiens

Les biofilms bactériens sont composés d’organismes unicellulaires vivants au sein d’une matrice protectrice, formée de macromolécules naturelles. Des biofilms non désirés peuvent avoir un certain nombre de conséquences néfastes, par exemple la diminution du transfert de chaleur dans les échangeurs de chaleurs, l’obstruction de membranes poreuses, la contamination des surfaces coques de navires, etc. Par ailleurs, les bactéries pathogènes qui prolifèrent dans un biofilm posent également un danger pour la santé s’ils croissent sur des surfaces médicales synthétiques comme des implants biomédicaux, cathéters ou des lentilles de vue. De plus, la croissance sur le tissu naturel par certaines souches des bactéries peut être fatale, comme Pseudomonas aeruginosa dans les poumons. Cependant, la présence de biofilms reste difficile à traiter, car les bactéries sont protégées par une matrice extracellulaire. Pour tenter de remédier à ces problèmes, nous proposons de développer une surface antisalissure (antifouling) qui libère sur demande des agents antimicrobiens. La proximité et la disposition du système de relargage placé sous le biofilm, assureront une utilisation plus efficace des molécules antimicrobiennes et minimiseront les effets secondaires de ces dernières. Pour ce faire, nous envisageons l’utilisation d’une couche de particules de silice mésoporeuses comme agents de livraison d’agents antimicrobiens. Les nanoparticules de silice mésoporeuses (MSNs) ont démontré un fort potentiel pour la livraison ciblée d’agents thérapeutiques et bioactifs. Leur utilisation en nano médecine découle de leurs propriétés de porosité intéressantes, de la taille et de la forme ajustable de ces particules, de la chimie de leur surface et leur biocompatibilité. Ces propriétés offrent une flexibilité pour diverses applications. De plus, il est possible de les charger avec différentes molécules ou biomolécules (de tailles variées, allant de l’ibuprofène à l’ARN) et d’exercer un contrôle précis des paramètres d’adsorption et des cinétiques de relargage (désorption). Mots Clés : biofilms, nanoparticules de silice mésoporeuses, microfluidique, surface antisalissure.

Avenues de synthèse d’un matériau magnétique multifonctionnel à des fins de catalyse hétérogène

La catalyse est à la base de la fabrication de médicaments, de produits textiles, d‘engrais, des pots d’échappement, et une multitude d’autres applications de notre quotidien. En effet, dans les pays industrialisés jusqu’à 80% des produits manufacturés utilisés au quotidien ont nécessité au moins une étape de catalyse lors de leur fabrication. Outre être actif, il est primordial pour un catalyseur performant d’être résistant à la désactivation qui se traduit par la perte d’activité ou de sélectivité d’un catalyseur au cours du temps. La synthèse d’un matériau multifonctionnel permet de répondre à ces différents critères. L’objectif d’un design intelligent de matériaux est de mener à des effets synergiques de chacune des composantes. Pour un catalyseur, en plus d’être actif et sélectif pour le produit désiré, il faut en plus qu’il soit durable, stable dans le temps, et permette d’être réutilisable. L’objectif de ce projet est de faire une synthèse originale, simple et reproductible d’un catalyseur actif et résistant à la désactivation. De base, un catalyseur se compose d’un support et d’un matériau actif. La nature, la morphologie et l’agencement de ces derniers dictent le comportement chimique du catalyseur final. Comme matériau actif, les nanoparticules d’or sont très prisées en raison de leur potentiel de catalyse élevée pour de nombreuses réactions. Cependant, aux températures de fonctionnement de la catalyse, les nanoparticules d’or ont tendance à se désactiver par coalescence. Pour remédier à cela, il est possible de déposer une couche de silice mésoporeuse afin de protéger les NPs d’or des rudes conditions de réaction tout en étant perméables aux espèces réactives. Plusieurs types de matériaux peuvent servir de support aux nanoparticules d’or. À ce titre, les particules d’oxydes de fer magnétiques telles que la magnétite (Fe[indice inférieur 3]O[indice inférieur 4]) sont intéressantes pour leur potentiel hyperthermique, phénomène par lequel des nanoparticules (NPs) magnétiques transforment de l’énergie électromagnétique provenant d’un champ externe haute fréquence en chaleur, créant ainsi des nano-fours. Une première couche de silice est utilisée comme matrice de greffage afin de fixer les nanoparticules d’or sur la magnétite. La structure visée est illustrée à la Figure ci-dessous. Figure 1 Structure du catalyseur de Fe2O4@SiO2-Au-SiO2m (Ge, Zhang, Zhang, & Yin, 2008) Plusieurs avenues d’assemblage et de synthèse sont explorées pour chacune des composantes de la structure visée. Les avantages et inconvénients ainsi que des mécanismes sont proposés pour chaque voie de synthèse. Le matériau est utilisé comme catalyseur pour la réaction de réduction du 4-Nitrophénol par du NaBH4. Pour ce qui est de la synthèse de magnétite par voie solvothermique, il a été démontré qu’il était important d’être dans un milieu sous pression puisque l’étape limitante de la réaction est la solubilité des particules de magnétites dans le milieu. Cela est en accord avec le principe de mûrissement d’Ostwald selon lequel les petites particules ont tendance à se dissoudre dans le milieu et précipiter à la surface des plus grosses particules de façon à diminuer l’énergie interfaciale. Cette synthèse a été reproduite avec succès et a mené à la production de nanoparticules de Fe[indice inférieur 3]O[indice inférieur 4] sphériques creuses d’une taille de 150 [plus ou moins] 30nm. Ces sphères creuses ont été recouvertes d’une couche de silice dense par une méthode de Stöber modifiée. Le recouvrement forme des amas de particules et est non uniforme en raison de la présence de poly(éthlyène glycol) à la sur face de la magnétite, un adjuvant présent lors de sa synthèse afin d’améliorer la dispersion de la magnétite. La synthèse et le greffage d’AuNPs sont bien maîtrisés : les AuNPs ont une taille de 17 [plus ou moins] 6nm et la quantité d’or greffé est assez élevée. Ultimement, une méthode de greffage alternative tel que le greffage par croissance in situ de nanoparticules d’or pourrait être emprunté afin d’obtenir des particules plus petites. Pour ce qui est de la formation d’une couche de silice mésoporeuse, la méthode par calcination est une meilleure option que par gravure chimique en raison de sa sélectivité envers la couche externe de silice plus élevée ainsi que la formation apparente de pores.