Club drug use and unprotected anal intercourse among HIV-seronegative men who have sex with men seeking HIV/STD testing at a local STD clinic in Houston

Objective. To explore (1) the association between "club drug" use and unprotected anal intercourse (UAI) and (2) the association between binge drug use and UAI among HIV seronegative men who have sex with men (MSM) seeking HIV/STD testing at a local clinic in Houston. ^ Study design. A sub-sample of 297 HIV seronegative MSM from a cross-sectional study of drug and sexual behavior in Houston was conducted in 2006. Patients who were seeking HIV/STD testing at a local MSM-identified STD clinic were recruited for an anonymous computer-assisted interview. Analysis of identified secondary data consisted of self-reported information about demographic characteristics, use of drugs, and sexual behaviors. ^ Results. With new and casual sex partners, there was a strong and statistically significant association between use of "club drugs" and UAI. No association between binge drug use and UAI was evident. Men aware of HIV seropositivity or unaware of the HIV serostatus of their primary partner were less likely to report UAI. ^ Conclusion. These data suggest that in the Houston area, HIV-negative MSM club drug users, particularly multiple drug users, are at higher risk of UAI than comparable MSMs who do not use club drugs. Episode-level data regarding binge use of these and other drugs, and UAI should be collected in future studies to explore their relationship. The 'new partner' category should be added to sex partner types to measure sex and drug use behaviors in future studies.^ Keywords. HIV-negative MSM; club drugs; unprotected anal intercourse; binge drug use. ^

The association between maternal use of spermicides, condoms, intra-uterine devices or progesterone and major structural birth defects

Birth defects occur in 1 of every 33 babies born in the United States, and are the leading cause of infant death. Mothers using contraceptives that become pregnant may continue to use their contraceptives after their first missed menstrual period, thus exposing their baby in utero to the contraceptive product. Progesterone is also sometimes prescribed during the first trimester of pregnancy to mothers with a history of miscarriages or infertility problems. To ensure the safety of these products, it is important to investigate whether there is an increased occurrence of babies born with birth defects to mothers using various contraceptive methods or progesterone in early pregnancy. Using data from the National Birth Defects Prevention Study (NBDPS), an ongoing multi-state, population based case-control study, this study assessed maternal exposures to IUDs, spermicides, condoms and progesterone in early pregnancy. ^ Progesterone used for threatened miscarriage during the first three months of pregnancy was associated with an increased occurrence of hypoplastic left heart (adjusted odds ratios (OR) 2.24, 95% CI 1.13-4.21), perimembranous ventricular septal defects (OR 1.64, 95% CI 1.10-2.41), septal associations (OR 2.52, 95% CI 1.45-4.24), esophageal atresia (OR 1.82, 95% CI 1.04-3.08), and hypospadias (OR 2.12, 95% CI 1.41-3.18). Mothers using progesterone for injectable contraception had increased (OR > 2.5), but insignificant odds ratios for anencephaly, septal associations, small intestinal atresias and omphalocel. Progesterone used for fertility was not associated with an increased occurrence of any birth defects examined. ^ Mothers using progesterone for fertility assistance and threatened miscarriage were very similar with respect to their demographics and pregnancy history. They also both reported similar types of progesterone. Thus, if progesterone was a causal risk factor for birth defects we would have expected to observe similar increases in risk among mothers using progesterone for both indications. Because we predominantly observed increased associations among mothers using progesterone for threatened miscarriage but not fertility assistance, it is possible the increased associations we observed were confounded by indication (i.e. progesterone was administered for vaginal bleeding which occurred as a sequelae to the formation of a congenital anomaly. ^ No significant increased associations were observed between maternal spermicide use during pregnancy and 26 of 27 types of structural malformations. While multiple statistical tests were performed we observed first trimester maternal spermicide use to be associated with a significant increased occurrence of perimembranous ventricular septal defects (OR 2.21, 95% CI 1.16-4.21). A decreased occurrence (OR < 1.0) was observed for several categories of birth defects among mothers who conceived in the first cycle after discontinuing the use of spermicides (22 of 28) or male condoms (23 of 33). ^ Overall the percent of IUD use was similar between mothers of controls and mothers of all cases in aggregate (crude OR 1.05, 95% CI 0.61-1.84). Power was limited to detect significant associations between IUD use and birth defects, however mothers using an IUD in the month immediately prior to conception or during pregnancy were not associated with an increase of birth defects. Limb defects and amniotic band sequence previously reported to be associated with IUD use during pregnancy were not found to occur among any mothers reporting the use of an IUD during pregnancy.^

CARMA3 serves as a critical mediator of NF-kappaB in multiple signal transduction pathways

The central dogma of molecular biology dictates that DNA is transcribed into RNA, which is later translated into protein. One of the early activators in this process is the transcription factor NF-κB. We have determined that an NF-κB inducer, CARMA3, is required for proper neural tube closure, similar to other NF-κB inducers. Using a genetic knockout of CARMA3, we demonstrated that it is required for Gαq-coupled GPCR-induced NF-κB activation. This is facilitated through a MAPK and IKK phosphorylation-independent mechanism, most likely by controlling NEMO-associated ubiquitination. We have also shown that CARMA3 is required for EGF and HRG-induced NF-κB activation. This activation requires the activity of both EGFR and HER2, as well as PKC. Again, we observed no defect in IKK phosphorylation, although we determined a clear defect in IKK activation. Finally, we have begun to determine the role of CARMA3 to both EGFR and HER2-induced tumorigenicity. By overexpressing a constitutive active mutant of HER2 in our CARMA3 WT and KO MEF cells, we have shown CARMA3 is important for HER2-driven soft agar colony growth. We have also shown that knockdown of endogenous CARMA3 in the EGFR-overexpressing A431 cell line abolishes EGF-induced NF-κB activation. These same cells have a dramatically reduced capacity to form colonies in soft agar as well. Using both mouse xenografts and a transgenic model of HER2-induced breast cancer, we have initiated studies which will help to determine the role of CARMA3 to in vivo tumorigenesis. Collectively, this work reveals novel roles for the CARMA3 protein in development, GPCR and EGFR/HER2 signaling. It also suggests that CARMA3 is involved in EGFR/HER2 mediated tumorigenesis, possibly indicating a novel therapeutic target for use in treatment of cancer. ^

Use of pneumococcal vaccine in people with chronic disease in United States

Objective. The risk of complications and deaths related to pneumococcal infections is high among high risk population (i.e. those with chronic diseases such as diabetes or asthma), despite current immunization recommendations. The aim of this study is to evaluate the use of pneumonia vaccine in adults with and without diabetes or asthma by year of age and whether immunization practices conform to policy recommendations. ^ Methods. Data were drawn from 2005 Behavioral Risk Factor Surveillance Study. Age specific estimated counts and proportions of pneumonia vaccination status were computed. The association of socio-demographic factors with vaccination status was estimated from multiple logistic regression and results were presented for adults (18-64yrs) and elderly (65 or older). ^ Results. Overall 12.3% of the adults and 61.5% of elderly reported ever received pneumonia vaccine. 66.8% of diabetics and 72.6% of asthmatics received the vaccine among elderly. 33.4% of diabetics and 21.6% of asthmatics received the vaccine among adults. These numbers are far away from Healthy people 2010 objective coverage rates of 90% for elderly and 60% for high risk adults. Though diabetes was one of the recommendations for the pneumonia vaccine still the status was less than 70% even at older ages. Although asthma was not an indication for pneumonia vaccine, asthmatics still achieved 50% level by an early age of 60 and reached up to 80% at as early as 75 years. In those having both asthma and diabetes, although the curve reaches to 50% level at a very early age of 40yrs, it is not stable until the age of 55 and percentages reached to as high as 90% in older ages. Odds of receiving pneumonia vaccine were high in individuals with diabetes or asthma in both the age groups. But the odds were stronger for diabetics in adults compared to those in the elderly [2.24 CI (2.08-2.42) and 1.32 CI (1.18-1.47)]. The odds were slightly higher in adults than in elderly for asthmatics [1.92 CI (1.80-2.04) and 1.73 CI (1.50-2.00)].The likelihood of vaccination also differed by gender, ethnicity, marital status, income category, having a health insurance, current employment, physician visit in last year, reporting of good to excellent health and flu vaccine status. ^ Conclusion. There is a very high proportion of high risk adults and elderly that remain unvaccinated. Given the proven efficacy and safety of vaccine there is a need for interventions targeting the barriers for under-vaccination with more emphasis on physician knowledge and practice as well as the recipient attitudes.^

Public service use by residents of Jackson Hinds Gardens before and after enrollment

Homelessness is associated with high use of public services such as health care and criminal justice services. Intervention designs to reverse homelessness have broadly fallen into two categories: either standard care which employs requisitely addressing the causes of homelessness, or housing first, which emphasizes provision of permanent housing without requisitely addressing the causes of homelessness. Multiple cities have recently commenced housing first interventions. Locally, Houston’s first housing first development is the Jackson Hinds Gardens project. The purpose of this study is to analyze the public service use of residents of housing first in Houston. Residents of Jackson Hinds Gardens who have been enrolled for at least 6 months were evaluated for public service use for an equal amount of time preceding and during their residence at Jackson Hinds. Resident interactions with county health services and criminal justice entities were determined by electronic database searches; these data were supplemented by life experience interview data. Service usage values pre- and post-enrollment at Jackson Hinds Gardens were compared by paired t-test analyses. We found that ER and inpatient usage decreased following enrollment in Jackson Hinds, although these reductions were not significant. In contrast, outpatient care and number of medications significantly increased following enrollment. These analyses inform on the effects of housing first in another major city, as well as informing the ethical considerations regarding housing first versus standard care. ^

Negotiated settlements: The utilities, multiple regulators and clean air

Utilities have made strides in reducing air pollutant levels, but the proposed 1990 Clean Air Act Amendments call for even greater reductions and more stringent enforcement. Federal and state air enforcement agencies now encourage the use of negotiated settlements as a way to bring about compliance. This research examines the operation of such procedures in 19 case studies and a formal survey with the negotiators to account for the differences in the nature of the settlements and to identify the factors contributing to their perceived success. ^

Change in permeation rates of acids and bases through limited use protective fabrics after repeated wash cycles

The primary objective of this study was to determine if there is a change in permeation rates when limited use protective fabrics undergo repeated exposure and wash cycles. The null hypothesis of this study was that no substantial change in permeation takes place after the test material is subjected to repeated contact with a strong acid or base and has undergone repeated wash cycles. ^ The materials tested were DuPont Tychem® CPF 3 and CPF 4 fabrics. The challenge chemicals in this study were ninety-eight percent sulfuric acid and fifty percent sodium hydroxide. Permeation testing was conducted utilizing ASTM designation F739-99a Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact. ^ In this study, no change in permeation rates of either challenge chemical was detected for CPF 3 or CPF 4 limited use protective fabrics after repeated exposure and wash cycles. Certain unexposed areas of the fabric suffered structural degradation unrelated to exposure and which may be due to multiple washings.^

Separating ITCZ- and ENSO-related rainfall changes in the Galápagos over the last 3 kyr using D/H ratios of multiple lipid biomarkers

We present a 3000-yr rainfall reconstruction from the Galápagos Islands that is based on paired biomarker records from the sediment of El Junco Lake. Located in the eastern equatorial Pacific, the climate of the Galápagos Islands is governed by movements of the Intertropical Convergence Zone (ITCZ) and the El Niño-Southern Oscillation (ENSO). We use a novel method for reconstructing past ENSO- and ITCZ-related rainfall changes through analysis of molecular and isotopic biomarker records representing several types of plants and algae that grow under differing climatic conditions. We propose that ?D values of dinosterol, a sterol produced by dinoflagellates, record changes in mean rainfall in El Junco Lake, while dD values of C34 botryococcene, a hydrocarbon unique to the green alga Botryococcus braunii, record changes in rainfall associated with moderate-to-strong El Niño events. We use these proxies to infer changes in mean rainfall and El Niño-related rainfall over the past 3000 yr. During periods in which the inferred change in El Niño-related rainfall opposed the change in mean rainfall, we infer changes in the amount of ITCZ-related rainfall. Simulations with an idealized isotope hydrology model of El Junco Lake help illustrate the interpretation of these proxy reconstructions. Opposing changes in El Niño- and ITCZ-related rainfall appear to account for several of the largest inferred hydrologic changes in El Junco Lake. We propose that these reconstructions can be used to infer changes in frequency and/or intensity of El Niño events and changes in the position of the ITCZ in the eastern equatorial Pacific over the past 3000 yr. Comparison with El Junco Lake sediment grain size records indicates general agreement of inferred rainfall changes over the late Holocene.

Methodology for automated generation of multiple choice questions in self assessment

Current trends in the European Higher Education Area (EHEA) are moving towards the continuous evaluation of the students in substitution of the traditional evaluation based on a single test or exam. This fact and the increase in the number of students during last years in Engineering Schools, requires to modify evaluation procedures making them compatible with the educational and research activities. This work presents a methodology for the automatic generation of questions. These questions can be used as self assessment questions by the student and/or as queries by the teacher. The proposed approach is based on the utilization of parametric questions, formulated as multiple choice questions and generated and supported by the utilization of common programs of data sheets and word processors. Through this approach, every teacher can apply the proposed methodology without the use of programs or tools different from those normally used in his/her daily activity

Implementation of multiple specialization in logic programs

We study the múltiple specialization of logic programs based on abstract interpretation. This involves in general generating several versions of a program predícate for different uses of such predícate, making use of information obtained from global analysis performed by an abstract interpreter, and finally producing a new, "multiply specialized" program. While the topic of múltiple specialization of logic programs has received considerable theoretical attention, it has never been actually incorporated in a compiler and its effects quantified. We perform such a study in the context of a parallelizing compiler and show that it is indeed a relevant technique in practice. Also, we propose an implementation technique which has the same power as the strongest of the previously proposed techniques but requires little or no modification of an existing abstract interpreter.

Advances in the Simultaneous Multiple Surface optical design method for imaging and non-imaging applications

Classical imaging optics has been developed over centuries in many areas, such as its paraxial imaging theory and practical design methods like multi-parametric optimization techniques. Although these imaging optical design methods can provide elegant solutions to many traditional optical problems, there are more and more new design problems, like solar concentrator, illumination system, ultra-compact camera, etc., that require maximum energy transfer efficiency, or ultra-compact optical structure. These problems do not have simple solutions from classical imaging design methods, because not only paraxial rays, but also non-paraxial rays should be well considered in the design process. Non-imaging optics is a newly developed optical discipline, which does not aim to form images, but to maximize energy transfer efficiency. One important concept developed from non-imaging optics is the “edge-ray principle”, which states that the energy flow contained in a bundle of rays will be transferred to the target, if all its edge rays are transferred to the target. Based on that concept, many CPC solar concentrators have been developed with efficiency close to the thermodynamic limit. When more than one bundle of edge-rays needs to be considered in the design, one way to obtain solutions is to use SMS method. SMS stands for Simultaneous Multiple Surface, which means several optical surfaces are constructed simultaneously. The SMS method was developed as a design method in Non-imaging optics during the 90s. The method can be considered as an extension to the Cartesian Oval calculation. In the traditional Cartesian Oval calculation, one optical surface is built to transform an input wave-front to an out-put wave-front. The SMS method however, is dedicated to solve more than 1 wave-fronts transformation problem. In the beginning, only 2 input wave-fronts and 2 output wave-fronts transformation problem was considered in the SMS design process for rotational optical systems or free-form optical systems. Usually “SMS 2D” method stands for the SMS procedure developed for rotational optical system, and “SMS 3D” method for the procedure for free-form optical system. Although the SMS method was originally employed in non-imaging optical system designs, it has been found during this thesis that with the improved capability to design more surfaces and control more input and output wave-fronts, the SMS method can also be applied to imaging system designs and possesses great advantage over traditional design methods. In this thesis, one of the main goals to achieve is to further develop the existing SMS-2D method to design with more surfaces and improve the stability of the SMS-2D and SMS-3D algorithms, so that further optimization process can be combined with SMS algorithms. The benefits of SMS plus optimization strategy over traditional optimization strategy will be explained in details for both rotational and free-form imaging optical system designs. Another main goal is to develop novel design concepts and methods suitable for challenging non-imaging applications, e.g. solar concentrator and solar tracker. This thesis comprises 9 chapters and can be grouped into two parts: the first part (chapter 2-5) contains research works in the imaging field, and the second part (chapter 6-8) contains works in the non-imaging field. In the first chapter, an introduction to basic imaging and non-imaging design concepts and theories is given. Chapter 2 presents a basic SMS-2D imaging design procedure using meridian rays. In this chapter, we will set the imaging design problem from the SMS point of view, and try to solve the problem numerically. The stability of this SMS-2D design procedure will also be discussed. The design concepts and procedures developed in this chapter lay the path for further improvement. Chapter 3 presents two improved SMS 3 surfaces’ design procedures using meridian rays (SMS-3M) and skew rays (SMS-1M2S) respectively. The major improvement has been made to the central segments selections, so that the whole SMS procedures become more stable compared to procedures described in Chapter 2. Since these two algorithms represent two types of phase space sampling, their image forming capabilities are compared in a simple objective design. Chapter 4 deals with an ultra-compact SWIR camera design with the SMS-3M method. The difficulties in this wide band camera design is how to maintain high image quality meanwhile reduce the overall system length. This interesting camera design provides a playground for the classical design method and SMS design methods. We will show designs and optical performance from both classical design method and the SMS design method. Tolerance study is also given as the end of the chapter. Chapter 5 develops a two-stage SMS-3D based optimization strategy for a 2 freeform mirrors imaging system. In the first optimization phase, the SMS-3D method is integrated into the optimization process to construct the two mirrors in an accurate way, drastically reducing the unknown parameters to only few system configuration parameters. In the second optimization phase, previous optimized mirrors are parameterized into Qbfs type polynomials and set up in code V. Code V optimization results demonstrates the effectiveness of this design strategy in this 2-mirror system design. Chapter 6 shows an etendue-squeezing condenser optics, which were prepared for the 2010 IODC illumination contest. This interesting design employs many non-imaging techniques such as the SMS method, etendue-squeezing tessellation, and groove surface design. This device has theoretical efficiency limit as high as 91.9%. Chapter 7 presents a freeform mirror-type solar concentrator with uniform irradiance on the solar cell. Traditional parabolic mirror concentrator has many drawbacks like hot-pot irradiance on the center of the cell, insufficient use of active cell area due to its rotational irradiance pattern and small acceptance angle. In order to conquer these limitations, a novel irradiance homogenization concept is developed, which lead to a free-form mirror design. Simulation results show that the free-form mirror reflector has rectangular irradiance pattern, uniform irradiance distribution and large acceptance angle, which confirm the viability of the design concept. Chapter 8 presents a novel beam-steering array optics design strategy. The goal of the design is to track large angle parallel rays by only moving optical arrays laterally, and convert it to small angle parallel output rays. The design concept is developed as an extended SMS method. Potential applications of this beam-steering device are: skylights to provide steerable natural illumination, building integrated CPV systems, and steerable LED illumination. Conclusion and future lines of work are given in Chapter 9. Resumen La óptica de formación de imagen clásica se ha ido desarrollando durante siglos, dando lugar tanto a la teoría de óptica paraxial y los métodos de diseño prácticos como a técnicas de optimización multiparamétricas. Aunque estos métodos de diseño óptico para formación de imagen puede aportar soluciones elegantes a muchos problemas convencionales, siguen apareciendo nuevos problemas de diseño óptico, concentradores solares, sistemas de iluminación, cámaras ultracompactas, etc. que requieren máxima transferencia de energía o dimensiones ultracompactas. Este tipo de problemas no se pueden resolver fácilmente con métodos clásicos de diseño porque durante el proceso de diseño no solamente se deben considerar los rayos paraxiales sino también los rayos no paraxiales. La óptica anidólica o no formadora de imagen es una disciplina que ha evolucionado en gran medida recientemente. Su objetivo no es formar imagen, es maximazar la eficiencia de transferencia de energía. Un concepto importante de la óptica anidólica son los “rayos marginales”, que se pueden utilizar para el diseño de sistemas ya que si todos los rayos marginales llegan a nuestra área del receptor, todos los rayos interiores también llegarán al receptor. Haciendo uso de este principio, se han diseñado muchos concentradores solares que funcionan cerca del límite teórico que marca la termodinámica. Cuando consideramos más de un haz de rayos marginales en nuestro diseño, una posible solución es usar el método SMS (Simultaneous Multiple Surface), el cuál diseña simultáneamente varias superficies ópticas. El SMS nació como un método de diseño para óptica anidólica durante los años 90. El método puede ser considerado como una extensión del cálculo del óvalo cartesiano. En el método del óvalo cartesiano convencional, se calcula una superficie para transformar un frente de onda entrante a otro frente de onda saliente. El método SMS permite transformar varios frentes de onda de entrada en frentes de onda de salida. Inicialmente, sólo era posible transformar dos frentes de onda con dos superficies con simetría de rotación y sin simetría de rotación, pero esta limitación ha sido superada recientemente. Nos referimos a “SMS 2D” como el método orientado a construir superficies con simetría de rotación y llamamos “SMS 3D” al método para construir superficies sin simetría de rotación o free-form. Aunque el método originalmente fue aplicado en el diseño de sistemas anidólicos, se ha observado que gracias a su capacidad para diseñar más superficies y controlar más frentes de onda de entrada y de salida, el SMS también es posible aplicarlo a sistemas de formación de imagen proporcionando una gran ventaja sobre los métodos de diseño tradicionales. Uno de los principales objetivos de la presente tesis es extender el método SMS-2D para permitir el diseño de sistemas con mayor número de superficies y mejorar la estabilidad de los algoritmos del SMS-2D y SMS-3D, haciendo posible combinar la optimización con los algoritmos. Los beneficios de combinar SMS y optimización comparado con el proceso de optimización tradicional se explican en detalle para sistemas con simetría de rotación y sin simetría de rotación. Otro objetivo importante de la tesis es el desarrollo de nuevos conceptos de diseño y nuevos métodos en el área de la concentración solar fotovoltaica. La tesis está estructurada en 9 capítulos que están agrupados en dos partes: la primera de ellas (capítulos 2-5) se centra en la óptica formadora de imagen mientras que en la segunda parte (capítulos 6-8) se presenta el trabajo del área de la óptica anidólica. El primer capítulo consta de una breve introducción de los conceptos básicos de la óptica anidólica y la óptica en formación de imagen. El capítulo 2 describe un proceso de diseño SMS-2D sencillo basado en los rayos meridianos. En este capítulo se presenta el problema de diseñar un sistema formador de imagen desde el punto de vista del SMS y se intenta obtener una solución de manera numérica. La estabilidad de este proceso se analiza con detalle. Los conceptos de diseño y los algoritmos desarrollados en este capítulo sientan la base sobre la cual se realizarán mejoras. El capítulo 3 presenta dos procedimientos para el diseño de un sistema con 3 superficies SMS, el primero basado en rayos meridianos (SMS-3M) y el segundo basado en rayos oblicuos (SMS-1M2S). La mejora más destacable recae en la selección de los segmentos centrales, que hacen más estable todo el proceso de diseño comparado con el presentado en el capítulo 2. Estos dos algoritmos representan dos tipos de muestreo del espacio de fases, su capacidad para formar imagen se compara diseñando un objetivo simple con cada uno de ellos. En el capítulo 4 se presenta un diseño ultra-compacto de una cámara SWIR diseñada usando el método SMS-3M. La dificultad del diseño de esta cámara de espectro ancho radica en mantener una alta calidad de imagen y al mismo tiempo reducir drásticamente sus dimensiones. Esta cámara es muy interesante para comparar el método de diseño clásico y el método de SMS. En este capítulo se presentan ambos diseños y se analizan sus características ópticas. En el capítulo 5 se describe la estrategia de optimización basada en el método SMS-3D. El método SMS-3D calcula las superficies ópticas de manera precisa, dejando sólo unos pocos parámetros libres para decidir la configuración del sistema. Modificando el valor de estos parámetros se genera cada vez mediante SMS-3D un sistema completo diferente. La optimización se lleva a cabo variando los mencionados parámetros y analizando el sistema generado. Los resultados muestran que esta estrategia de diseño es muy eficaz y eficiente para un sistema formado por dos espejos. En el capítulo 6 se describe un sistema de compresión de la Etendue, que fue presentado en el concurso de iluminación del IODC en 2010. Este interesante diseño hace uso de técnicas propias de la óptica anidólica, como el método SMS, el teselado de las lentes y el diseño mediante grooves. Este dispositivo tiene un límite teórica en la eficiencia del 91.9%. El capítulo 7 presenta un concentrador solar basado en un espejo free-form con irradiancia uniforme sobre la célula. Los concentradores parabólicos tienen numerosas desventajas como los puntos calientes en la zona central de la célula, uso no eficiente del área de la célula al ser ésta cuadrada y además tienen ángulos de aceptancia de reducido. Para poder superar estas limitaciones se propone un novedoso concepto de homogeneización de la irrandancia que se materializa en un diseño con espejo free-form. El análisis mediante simulación demuestra que la irradiancia es homogénea en una región rectangular y con mayor ángulo de aceptancia, lo que confirma la viabilidad del concepto de diseño. En el capítulo 8 se presenta un novedoso concepto para el diseño de sistemas afocales dinámicos. El objetivo del diseño es realizar un sistema cuyo haz de rayos de entrada pueda llegar con ángulos entre ±45º mientras que el haz de rayos a la salida sea siempre perpendicular al sistema, variando únicamente la posición de los elementos ópticos lateralmente. Las aplicaciones potenciales de este dispositivo son varias: tragaluces que proporcionan iluminación natural, sistemas de concentración fotovoltaica integrados en los edificios o iluminación direccionable con LEDs. Finalmente, el último capítulo contiene las conclusiones y las líneas de investigación futura.

Environmental variables modeling based on remote sensing data using time series analysis: forestry and agricultural applications

En la actualidad, el seguimiento de la dinámica de los procesos medio ambientales está considerado como un punto de gran interés en el campo medioambiental. La cobertura espacio temporal de los datos de teledetección proporciona información continua con una alta frecuencia temporal, permitiendo el análisis de la evolución de los ecosistemas desde diferentes escalas espacio-temporales. Aunque el valor de la teledetección ha sido ampliamente probado, en la actualidad solo existe un número reducido de metodologías que permiten su análisis de una forma cuantitativa. En la presente tesis se propone un esquema de trabajo para explotar las series temporales de datos de teledetección, basado en la combinación del análisis estadístico de series de tiempo y la fenometría. El objetivo principal es demostrar el uso de las series temporales de datos de teledetección para analizar la dinámica de variables medio ambientales de una forma cuantitativa. Los objetivos específicos son: (1) evaluar dichas variables medio ambientales y (2) desarrollar modelos empíricos para predecir su comportamiento futuro. Estos objetivos se materializan en cuatro aplicaciones cuyos objetivos específicos son: (1) evaluar y cartografiar estados fenológicos del cultivo del algodón mediante análisis espectral y fenometría, (2) evaluar y modelizar la estacionalidad de incendios forestales en dos regiones bioclimáticas mediante modelos dinámicos, (3) predecir el riesgo de incendios forestales a nivel pixel utilizando modelos dinámicos y (4) evaluar el funcionamiento de la vegetación en base a la autocorrelación temporal y la fenometría. Los resultados de esta tesis muestran la utilidad del ajuste de funciones para modelizar los índices espectrales AS1 y AS2. Los parámetros fenológicos derivados del ajuste de funciones permiten la identificación de distintos estados fenológicos del cultivo del algodón. El análisis espectral ha demostrado, de una forma cuantitativa, la presencia de un ciclo en el índice AS2 y de dos ciclos en el AS1 así como el comportamiento unimodal y bimodal de la estacionalidad de incendios en las regiones mediterránea y templada respectivamente. Modelos autorregresivos han sido utilizados para caracterizar la dinámica de la estacionalidad de incendios y para predecir de una forma muy precisa el riesgo de incendios forestales a nivel pixel. Ha sido demostrada la utilidad de la autocorrelación temporal para definir y caracterizar el funcionamiento de la vegetación a nivel pixel. Finalmente el concepto “Optical Functional Type” ha sido definido, donde se propone que los pixeles deberían ser considerados como unidades temporales y analizados en función de su dinámica temporal. ix SUMMARY A good understanding of land surface processes is considered as a key subject in environmental sciences. The spatial-temporal coverage of remote sensing data provides continuous observations with a high temporal frequency allowing the assessment of ecosystem evolution at different temporal and spatial scales. Although the value of remote sensing time series has been firmly proved, only few time series methods have been developed for analyzing this data in a quantitative and continuous manner. In the present dissertation a working framework to exploit Remote Sensing time series is proposed based on the combination of Time Series Analysis and phenometric approach. The main goal is to demonstrate the use of remote sensing time series to analyze quantitatively environmental variable dynamics. The specific objectives are (1) to assess environmental variables based on remote sensing time series and (2) to develop empirical models to forecast environmental variables. These objectives have been achieved in four applications which specific objectives are (1) assessing and mapping cotton crop phenological stages using spectral and phenometric analyses, (2) assessing and modeling fire seasonality in two different ecoregions by dynamic models, (3) forecasting forest fire risk on a pixel basis by dynamic models, and (4) assessing vegetation functioning based on temporal autocorrelation and phenometric analysis. The results of this dissertation show the usefulness of function fitting procedures to model AS1 and AS2. Phenometrics derived from function fitting procedure makes it possible to identify cotton crop phenological stages. Spectral analysis has demonstrated quantitatively the presence of one cycle in AS2 and two in AS1 and the unimodal and bimodal behaviour of fire seasonality in the Mediterranean and temperate ecoregions respectively. Autoregressive models has been used to characterize the dynamics of fire seasonality in two ecoregions and to forecasts accurately fire risk on a pixel basis. The usefulness of temporal autocorrelation to define and characterized land surface functioning has been demonstrated. And finally the “Optical Functional Types” concept has been proposed, in this approach pixels could be as temporal unities based on its temporal dynamics or functioning.

Testing of crop Models for Accurate Predictions of Evapotranspiration and crop Water Use

All crop models, whether site-specific or global-gridded and regardless of crop, simulate daily crop transpiration and soil evaporation during the crop life cycle, resulting in seasonal crop water use. Modelers use several methods for predicting daily potential evapotranspiration (ET), including FAO-56, Penman-Monteith, Priestley-Taylor, Hargreaves, full energy balance, and transpiration water efficiency. They use extinction equations to partition energy to soil evaporation or transpiration, depending on leaf area index. Most models simulate soil water balance and soil-root water supply for transpiration, and limit transpiration if water uptake is insufficient, and thereafter reduce dry matter production. Comparisons among multiple crop and global gridded models in the Agricultural Model Intercomparison and Improvement Project (AgMIP) show surprisingly large differences in simulated ET and crop water use for the same climatic conditions. Model intercomparisons alone are not enough to know which approaches are correct. There is an urgent need to test these models against field-observed data on ET and crop water use. It is important to test various ET modules/equations in a model platform where other aspects such as soil water balance and rooting are held constant, to avoid compensation caused by other parts of models. The CSM-CROPGRO model in DSSAT already has ET equations for Priestley-Taylor, Penman-FAO-24, Penman-Monteith-FAO-56, and an hourly energy balance approach. In this work, we added transpiration-efficiency modules to DSSAT and AgMaize models and tested the various ET equations against available data on ET, soil water balance, and season-long crop water use of soybean, fababean, maize, and other crops where runoff and deep percolation were known or zero. The different ET modules created considerable differences in predicted ET, growth, and yield.

The role of visualizations in urban forestry. Conclusions from managers’ perspectives

La presente tesis examina el uso potencial y actual de las técnicas de simulación visual aplicadas al campo de la gestión y la planificación del arbolado urbano. El estudio incluye las aplicaciones potenciales de las visualizaciones por ordenador, así como los beneficios que esto acarrearía. También se analizan las posibles barreras que surgirían de la implementación de esta nueva herramienta y se ofrece una lista de recomendaciones para superarlas. La investigación tiene un carácter exploratorio que utiliza una combinación de técnicas de investigación cuantitativas y cualitativas, dónde se emplean cuestionarios y entrevistas personales semi-estructuradas para estudiar y analizar las opiniones y reacciones de los gestores de arbolado urbano de los distritos de la ciudad de Londres (Reino Unido), denominados Tree Officers (LTOs). Para el desarrollo de la tesis se recopilaron y analizaron las respuestas al cuestionario del 41 por ciento de los LTOs pertenecientes al 88 por ciento de los distritos de Londres y se realizaron un total de 17 entrevistas personales. Los resultados del análisis estadístico de las respuestas del cuestionario y los análisis cruzados de las distintas variables se complementaron con las conclusiones obtenidas del análisis temático de los datos cualitativos recopilados durante las entrevistas. Los usos potenciales de las técnicas de simulación visual aplicadas a la gestión y planificación del arbolado urbano sugeridos fueron obtenidos combinado las conclusiones de, primero, la comparación de las cuestiones que los LTOs consideraron que más tiempo y recursos necesitaban y que actualmente no era posible resolverlas satisfactoriamente con las herramientas y los procesos disponibles, con la información acerca de cómo se habían empleado las visualizaciones en situaciones similares en otros campos tales como planificación urbano, el paisajismo o la gestión forestal. Segundo, se analizaron las reacciones y opiniones de los LTOs ante un conjunto de visualizaciones presentadas durante las entrevistas, desarrolladas ad hoc para mostrar un abanico representativo de ejemplos de utilización de las técnicas de simulación visual, que, a su vez se complementaron con los usos adicionales que los propios LTOs sugirieron tras ver las visualizaciones presentadas. Los resultados muestran que el uso actual de simulaciones visuales por parte de los LTOs es muy limitado pero si que reciben un gran número de visualizaciones de otros departamentos y como parte de la documentación presentada en las solicitudes de permisos para edificación o desarrollo urbanístico. Los resultados indican que las visualizaciones que son presentadas a los LTOs no son objetivas ni precisas por lo que se argumenta que esta situación es un factor importante que impide una toma de decisiones adecuada y una correcta transmisión de infracción al público y al resto de partes implicadas. Se sugiere la creación de un código que regule el uso de visualizaciones en el campo de la gestión y planificación del arbolado urbano. ABSTRACT This thesis examined the use of computer visualizations in urban forestry management and planning. Potential roles of visualizations were determined the benefits that its use would provide. Additionally, the possible barriers in the implementation of visualizations in urban forestry management and planning were also studied and recommendations on how to overcome them were provided The research conducted was an exploratory study using survey research methods and personal semi-structured interviews. The perspectives and reactions of London (UK) boroughs’ tree officers (LTOs) were analysed combining quantitative and qualitative research methods. The study surveyed 41 percent of all Tree Officers in London, obtaining responses from 88 percent of the boroughs and performed 17 personal interviews. Statistical analysis of the data and cross-variables analysis provided rich information that was then complemented with the conclusions from thematic analysis of the qualitative data from the interviews. Potential roles of visualizations were determined first by understanding the challenges that LTOs are facing today and comparing them with how visualizations have helped in similar situations in urban forestry and other related fields like landscape architecture, urban planning and forestry; second, the reactions of LTOs to a set of examples of proposed uses of visualizations were also complemented with the additional uses proposed by LTOs after seeing the visualizations. The visualizations were created ad hoc to show a variety of representative examples of the sue of visualization in urban forestry management and planning and were presented during the interviews to LTOS. Results show that the current production of visualizations is very reduced among tree officers but that they are frequent receptors of visualizations coming from other departments and as part of the documentation of planning applications. Findings show that the current visualizations that get to Tree Officers are biased and inaccurate and therefore it is argued the the current use of visualizations is a threat to legitimate informed decision making and public information. The development of a code for the use of visualizations in urban forestry management and planning is suggested.

Nuevos mecanismos moleculares de tolerancia a sequía y otros tipos de estrés abiótico en especies arbóreas de interés económico

Las masas forestales tienen una importancia colosal para nuestra sociedad y el conjunto de la biosfera. Estudios recientes a escala mundial indican que la sequía es el factor abiótico que más afecta a su crecimiento y supervivencia, seguida por las temperaturas extremas y la salinidad. Aunque comprender los mecanismos con que las especies arbóreas toleran estas formas de estrés tiene un interés aplicado evidente, dichos mecanismos se han estudiado mucho más en especies herbáceas modelo o de interés agronómico. Existen sin embargo diferencias notables entre ellas, como se demuestra en esta tesis y en otros trabajos recientes. Nuestro estudio se centra concretamente en la respuesta molecular del chopo –el sistema modelo forestal más desarrollado– al estrés abiótico, con particular énfasis en la sequía. Utilizando una estrategia proteómica y tratamientos controlados, hemos identificado componentes mayoritarios de dicha respuesta. Su participación en la misma se ha validado mediante análisis transcripcionales detallados utilizando tecnología qRT-PCR (PCR cuantitativa en tiempo real). Hemos identificado proteínas cuyo nexo funcional con mecanismos de tolerancia ya era conocido, como chaperonas moleculares sHSP o enzimas que atenúan el estrés oxidativo, pero también proteínas cuya relación funcional con el estrés es menos clara o incluso novedosa, como polifenol oxidasas (PPO), deshidrogenasas/reductasas de cadena corta (SDR), o bicupinas (BIC), entre otras. El cuerpo central de la tesis consiste en la caracterización detallada de una PPO inusual, cuya inducción por estrés hídrico se describe por vez primera. Estas enzimas están ampliamente distribuidas en plantas, si bien su número es muy variable de unas especies a otras. Algunas, como nogal, tienen un único gen, mientras que Arabidopsis no tiene ninguno. En la última versión del genoma de chopo hemos identificado un total de 12 miembros bona fide, corrigiendo trabajos previos, y hemos caracterizado su expresión individual ante diferentes situaciones de estrés controlado y tratamientos hormonales. La isoforma antedicha es el único miembro de la familia que responde claramente a la deshidratación. También responde a salinidad y a la mayor parte de tratamientos hormonales ensayados, pero no a daño mecánico o tratamientos con metil jasmonato. Esto la diferencia de enzimas homólogas presentes en otras especies de plantas, que se han relacionado experimentalmente con estrés biótico. Los patrones de acumulación de transcritos en árboles adultos son compatibles con un papel protector frente a la sequía. La integración de nuestros estudios funcionales y filogenéticos sugiere que la familia ha sufrido un proceso reciente de diversificación y neofuncionalización, siendo la protección frente a deshidratación su papel primigenio. Aunque se conoce la actividad bioquímica in vitro de este tipo de enzimas, sus sustratos naturales son esencialmente una incógnita. Mediante expresión heteróloga en Escherichia coli BL21(DE3) hemos detectado que la enzima de chopo es capaz de oxidar L-DOPA a dopaquinona, siendo menos activa frente a otros sustratos. Por otra parte, hemos demostrado su localización cloroplástica mediante transformación transitoria de protoplastos con fusiones a la proteína fluorescente YFP. Mediante la obtención de plantas transgénicas de A. thaliana hemos demostrado que la enzima de chopo aumenta considerablemente la tolerancia in vivo frente a la deshidratación y al estrés salino. El análisis fenotípico detallado de las líneas transgénicas, combinando múltiples metodologías, nos ha permitido sustanciar que la tolerancia tiene una base compleja. Esta incluye una mayor protección del sistema fotosintético, una capacidad antioxidante muy incrementada y la acumulación de solutos osmoprotectores como la prolina. Los análisis metabolómicos nos han permitido asociar la expresión de la proteína a la síntesis de un flavano no descrito previamente en A. thaliana, vinculando la enzima de chopo con la síntesis de fenilpropanoides. También hemos observado alteraciones en los niveles hormonales que podrían subyacer a efectos pleiotrópicos con interés aplicado, como un aumento consistente del tamaño de la planta o el acortamiento del ciclo de crecimiento. Además de aportar datos novedosos sobre la funcionalidad in vivo de esta familia de oxidasas, los resultados de esta tesis demuestran que los árboles son sistemas de estudio interesantes para caracterizar nuevas estrategias de tolerancia al estrés abiótico con potencial aplicado. ABSTRACT Forests masses have an extraordinary importance for our society and the biosphere. Recent worldwide studies indicate that drought is the abiotic factor that affects more their growing and survival, followed by extreme temperatures and salinity. The understanding of how the arboreal species tolerate the stress has an evident practical interest, but their mechanisms have been studied much more in herbaceous species or with agronomic interest. However, considerable differences exist between them, as this thesis and recent studies show. Our study is focused on the molecular response of the poplar –the more developed forestry model system- to abiotic stress, specifically focused in the drought. Using a proteomic strategy and controlled treatments, we have identified main components in such response. Its participation has been validated through transcriptional analysis using qRT-PCR technology. We have identified proteins whose functional connection with tolerance mechanisms were already known, as molecular chaperones sHSP or enzymes that attenuate the oxidative stress, but also some proteins whose functional relationship with the stress is less clear or even novel, as polifenol oxidases (PPO), short chain deshidrogenases/reductases (SDR), or bicupines (BIC), among others. The central body of the thesis consists of the detailed characterization of an unsual PPO, whose induction due to drought stress is first described. These enzymes are thoroughly distributed in plants, but their number of members is very variable among species. Some of them, as the walnut tree, have a single gene, while Arabidopsis has none. We have identified a total of 12 members in the last version of the poplar genome, correcting previous works, and have characterized their individual expression against different situations of controlled stress and hormone treatments. The aforementioned isoform is the only member of the family that responds clearly to the drought. It also reacts to salinity and the majority of hormonal treatments tested, but it does not respond to mechanical damage or treatments with methyl jasmonate. This is the difference with homologue enzymes present in other plant species, which have been related experimentally with abiotic stress. The accumulation patterns of transcripts in adult trees are compatible with a protector role against drought. The integration of our functional and phylogenetic studies suggests that the family has suffered a recent process of diversification and neofunctionalization, being the protection against drought their original role. Although the in vitro biochemistry activity of this kind of enzymes is already known, their natural substracts are essentially a mystery. By means of heterologous expression of Escherichia coli BL21(DE3) we have detected that the enzyme of poplar is able to oxidize L-DOPA to dopaquinone, being less active against other substrates. Additionally, we have proven its chloroplastic location with transitory transformation of protoplasts with YFP protein fusion. By means of getting transgenic plants of A. thaliana, we have demonstrated that the poplar enzyme increases notably the in vivo tolerance against the drought and salinity stresses. The phenotypic analysis of the transgenic lines, and the use of multiple methodologies, allowed us to test the complexity of the tolerance. This includes a major protection of the photosynthetic system, a very increased antioxidant capacity and the accumulation of osmoprotectant solutes as the proline. The metabolic analysis has allowed to associate the protein expression with the synthesis of a Flavan non described previously in A. thalaiana, linking the enzyme of poplar with the synthesis of phenylpropanoids. We have observed alterations in the hormonal levels that could underlie pleiotropic effects with applied interest, as a consistent increase of the size of the plant and the reduction of the growth cycle. The results of this thesis, in addition to provide novel data about the in vivo functionality of the oxidase family, demonstrate that the trees are interesting systems of study to characterize new strategies of tolerance against abiotic stress with applied potential.