Controlling the spin of metal atoms adsorbed on oxide surfaces: Ni on regular and defective sites of the MgO(001) surface

We have analyzed the relative energy of nonmagnetic and magnetic low-lying electronic states of Ni atoms adsorbed on regular and defective sites of the MgO(001) surface. To this end cluster and periodic surface models are used within density functional theory. For Ni atoms adsorbed on oxygen vacancies at low coverage, the interaction energy between the metal and the support is much larger than on regular sites. Strong bonding results in a diamagnetic adsorbed species and the energy required to reach the high-spin state increases. Moreover, a correlation appears between the low-spin to high-spin energy difference and the interaction energy hypothesizing that it is possible to prepare the surface to tune the high-spin to low-spin energy difference. Magnetic properties of adsorbed thin films obtained upon increasing coverage are more difficult to interpret. This is because the metallic bond is readily formed and dominates over the effect of the atoms directly bound to the vacancy.

DATA WAREHOUSING IN A GLOBAL METAL INDUSTRIAL COMPANY

Työn tavoittena oli selvittää, miten tietovarastointi voi tukea yrityksessä tapahtuvaa päätöksentekoa. Tietovarastokomponenttien ja –prosessien kuvauksen jälkeen on käsitelty tietovarastoprojektin eri vaiheita. Esitettyä teoriaa sovellettiin käytäntöön globaalissa metalliteollisuusyrityksessä, jossa tietovarastointikonseptia testattiin. Testauksen perusteella arvioitiin olemassa olevan tiedon tilaa sekä kahden käytetyn ohjelmiston toimivuutta tietovarastoinnissa. Yrityksen operatiivisten järjestelmien tiedon laadun todettiin olevan tutkituilta osin epäyhtenäistä ja puutteellista. Siksi tiedon suora yrityslaajuinen hyödyntäminen luotettavien ja hyvälaatuisten raporttien luonnissa on vaikeaa. Lisäksi eri yksiköiden välillä havaittiin epäyhtenäisyyttä käytettyjen liiketoiminnan käsitteiden sekä järjestelmien käyttötapojen suhteen. Testauksessa käytetyt ohjelmistot suoriutuivat perustietovarastoinnista hyvin, vaikkakin joitain rajoituksia ja erikoisuuksia ilmenikin. Työtä voidaan pitää ennen varsinaista tietovarastoprojektia tehtävänä esitutkimuksena. Jatkotoimenpiteinä ehdotetaan testauksen jatkamista nykyisillä työkaluilla kohdistaen tavoitteet konkreettisiin tuloksiin. Tiedon laadun tärkeyttä tulee korostaa koko organisaatiossa ja olemassa olevan tiedon laatua pitää parantaa tulevaisuudessa.

Metal dealing at the origin of the Chordata phylum: The metallothionein system and metal overload response in Amphioxus.

Non-vertebrate chordates, specifically amphioxus, are considered of the utmost interest for gaining insight into the evolutionary trends, i.e. differentiation and specialization, of gene/protein systems. In this work, MTs (metallothioneins), the most important metal binding proteins, are characterized for the first time in the cephalochordate subphylum at both gene and protein level, together with the main features defining the amphioxus response to cadmium and copper overload. Two MT genes (BfMT1 and BfMT2) have been identified in a contiguous region of the genome, as well as several ARE (antioxidant response element) and MRE (metal response element) located upstream the transcribed region. Their corresponding cDNAs exhibit identical sequence in the two lancelet species (B. floridae and B. lanceolatum), BfMT2 cDNA resulting from an alternative splicing event. BfMT1 is a polyvalent metal binding peptide that coordinates any of the studied metal ions (Zn, Cd or Cu) rendering complexes stable enough to last in physiological environments, which is fully concordant with the constitutive expression of its gene, and therefore, with a metal homeostasis housekeeping role. On the contrary, BfMT2 exhibits a clear ability to coordinate Cd(II) ions, while it is absolutely unable to fold into stable Cu (I) complexes, even as mixed species. This identifies it as an essential detoxification agent, which is consequently only induced in emergency situations. The cephalochordate MTs are not directly related to vertebrate MTs, neither by gene structure, protein similarity nor metal-binding behavior of the encoded peptides. The closest relative is the echinoderm MT, which confirm proposed phylogenetic relationships between these two groups. The current findings support the existence in most organisms of two types of MTs as for their metal binding preferences, devoted to different biological functions: multivalent MTs for housekeeping roles, and specialized MTs that evolve either as Cd-thioneins or Cu-thioneins, according to the ecophysiological needs of each kind of organisms.

Labor market experience and well-being after firm closure. Survey evidence on displaced manufacturing workers in Switzerland

This study examines how plant closure affected individuals' careers and lives about two years after they lost their job. We analyze the displaced workers' reemployment prospects and study for reemployed workers the characteristics of their new jobs in terms of reemployment sectors, wages, and job quality. Additionally, we inquire how workers' sociability and subjective well-being were affected by job loss. Our analysis is based on our own survey conducted in Switzerland in 2011. The survey included the workforce of five manufacturing companies that had closed down two years earlier. We addressed the risk of biases typically prevailing with observational data by complementing it with register data from the public unemployment insurance. Moreover, we use a control group based on matched data from the Swiss Household Panel. We find that workers experience strongly diverging outcomes after plant closure: on the one hand, high proportions of the workers experience a smooth transition after plant closure. More than two-thirds of the workers returned to employment, more than half of them within less than six months. With respect to their social lives, we find that positive changes in relationships with their spouse, family and friends are more frequent than negative changes. On the other hand, for a small group of workers plant closure had a detrimental effect. Close to twenty percent remained unemployed. About ten percent of the workers were long-term unemployed and subsequently often were reemployed in jobs of lower quality. Unemployed workers and workers who dropped out of the labor force were particularly prone to find their subjective well-being decreasing. The most vulnerable subgroup in our study were workers over 55. This result stands in striking contrast to a large body of literature that considers labor market institutions to be primarily biased against young workers. Our findings show that older workers not only take longer to find a job but are also less likely to return to employment. Moreover, if they manage to find a job, they experience the severest cuts in wages and job quality of all cohorts. From a life-course perspective this result is remarkable since it shows that workers are not protected from hardship in their late careers. In light of the current demographic changes this finding may have important policy implications. -- Cette étude analyse l'impact des fermetures d'entreprises sur les travailleurs licenciés. Plus précisément, nous examinons les chances de réinsertion des travailleurs dans le marché du travail et - pour ceux qui l'ont fait avec succès - dans quels secteurs, pour quels salaires et avec quelle qualité d'emploi ils sont réengagés. Nous nous intéressons également aux répercussions engendrées par la perte de l'emploi sur la sociabilité et le bien-être subjectif des travailleurs concernés. Notre analyse se base sur les données d'une enquête que nous avons menée en 2011. Cette enquête cible le personnel de cinq entreprises industrielles suisses qui avaient fermé leurs portes deux ans auparavant. Pour dépasser les biais typiques liés aux données d'observation, nous utilisons en complément des données administratives issues de l'assurance chômage publique. De plus, nous utilisons un groupe de contrôle basé sur des données appariées provenant du Panel Suisse de Ménage. Nos analyses montrent des résultats fortement contrastés. D'un côté, la majeure partie des travailleurs ont vécu une transition professionnelle plutôt facile : plus des deux tiers des personnes ont retrouvé un travail et parmi elles plus de la moitié en moins de six mois. Par rapport aux relations sociales, tant avec leur partenaire, qu'avec les membres de leur famille et leurs amis, les changements expérimentés étaient plus fréquemment positifs que négatifs. De l'autre côté, cependant, pour une petite partie de travailleurs la fermeture de leur entreprise a eu des conséquences très négatives sur leur carrière et leur bien-être. Au moment de notre enquête, presque vingt pourcents des travailleurs étaient au chômage. Les personnes au chômage et celles qui avaient quitté le marché du travail ont été particulièrement affectées par une diminution de leur bien-être subjectif. Les plus vulnérables parmi les travailleurs licenciés étaient ceux qui étaient âgés de plus de 55 ans. Notre analyse montre que les travailleurs âgés ont beaucoup moins fréquemment retrouvé un travail. Pour les personnes de plus de 55 ans qui ont tout de même retrouvé un emploi, la réinsertion a durée plus longtemps, les pertes de salaire étaient plus conséquentes et la diminution de la qualité de l'emploi plus grande que pour les autres cohortes. Au vu des changements démographiques actuels, ce résultat interpellant peut avoir des implications politiques importantes.

Impact of the Spanish smoking control law on exposure to second-hand smoke and respiratory health in hospitality workers: a cohort study

A smoke-free law came into effect in Spain on 1st January 2006, affecting all enclosed workplaces except hospitality venues, whose proprietors can choose among totally a smoke-free policy, a partial restriction with designated smoking areas, or no restriction on smoking on the premises. We aimed to evaluate the impact of the law among hospitality workers by assessing second-hand smoke (SHS) exposure and the frequency of respiratory symptoms before and one year after the ban.

Designing of statically loaded sheet metal structures

The goal of this thesis is to give information to machine designers about how to design and size sheet metal structures and joints. Generally, the designing object is to lighten structures. To design structures that are light and can carry loads more effectively, designers have to be updated of new manufacturing techniques and new designing methods and criterions. With knowledge of this thesis, a designer can recognize objects and methods plus how and where it is possible to apply these new more effectively load carrying structures. The thesis gives answers to questions of corrosion and material planning, goes into joint types and manufacturing techniques of sheet metal structures. One of the main issues is to develop designers world of ideas to design right kind of products with new lasertechniques.

Self-expandable metal stents in the treatment of acute esophageal variceal bleeding.

Acute variceal bleeding (AVB) is a life-threatening complication in patients with cirrhosis. Hemostatic therapy of AVB includes early administration of vasoactive drugs that should be combined with endoscopic therapy, preferably banding ligation. However, failure to control bleeding or early rebleed within 5 days still occurs in 15-20% of patients with AVB. In these cases, a second endoscopic therapy may be attempted (mild bleeding in a hemodynamically stable patient) or we can use a balloon tamponade as a bridge to definitive derivative treatment (i.e., a transjugular intrahepatic portosystemic shunt). Esophageal balloon tamponade provides initial control in up to 80% of AVB, but it carries a high risk of major complications, especially in cases of long duration of tamponade (>24 h) and when tubes are inserted by inexperienced staff. Preliminary reports suggest that self-expandable covered esophageal metallic stents effectively control refractory AVB (i.e., ongoing bleeding despite pharmacological and endoscopic therapy or massive bleeding precluding endoscopic therapy) with a low incidence of complications. Thus, covered self-expanding metal stents may represent an alternative to the Sengstaken-Blakemore balloon for the temporary control of bleeding in treatment failures. Further studies are required to determine the role of this new device in AVB.

Fusion weld metal solidification:Continuum from weld interface to centerline

We present a brief résumé of the history of solidification research and key factors affecting the solidification of fusion welds. There is a general agreement of the basic solidification theory, albeit differing - even confusing - nomenclatures do exist, and Cases 2 and 3 (the Chalmers' basic boundary conditions for solidification, categorized by Savage as Cases) are variably emphasized. Model Frame, a tool helping to model the continuum of fusion weld solidification from start to end, is proposed. It incorporates the general solidification models, of which the pertinent ones are selected for the actual modeling. The basic models are the main solidification Cases 1…4. These discrete Cases are joined with Sub-Cases: models of Pfann, Flemings and others, bringing needed Sub-Case variables into the model. Model Frame depicts a grain growing from the weld interface to its centerline. Besides modeling, the Model Frame supports education and academic debate. The new mathematical modeling techniques will extend its use into multi-dimensional modeling, introducing new variables and increasing the modeling accuracy. We propose a model: melting/solidification-model (M/S-model) - predicting the solute profile at the start of the solidification of a fusion weld. This Case 3-based Sub-Case takes into account the melting stage, the solute back-diffusion in the solid, and the growth rate acceleration typical to fusion welds. We propose - based on works of Rutter & Chalmers, David & Vitek and our experimental results on copper - that NEGS-EGS-transition is not associated only with cellular-dendritic-transition. Solidification is studied experimentally on pure and doped copper with welding speed range from 0 to 200 cm/min, with one test at 3000 cm/min. Found were only planar and cellular structures, no dendrites - columnar or equiaxed. Cell sub structures: rows of cubic elements we call "cubelettes", "cell-bands" and "micro-cells", as well as an anomalous crack morphology "crack-eye", were detected, as well as microscopic hot crack nucleus we call "grain-lag cracks", caused by a grain slightly lagging behind its neighbors in arrival to the weld centerline. Varestraint test and R-test revealed a change of crack morphologies from centerline cracks to grainand cell boundary cracks with an increasing welding speed. High speed made the cracks invisible to bare eye and hardly detectable with light microscope, while electron microscope often revealed networks of fine micro-cracks.

Drug-eluting stents compared to bare-metal stents improve short-term survival in patients with acute myocardial infarction undergoing primary percutaneous coronary intervention: a nationwide prospective analysis of the AMIS Plus registry.

BACKGROUND: Recently, it has been suggested that the type of stent used in primary percutaneous coronary interventions (pPCI) might impact upon the outcomes of patients with acute myocardial infarction (AMI). Indeed, drug-eluting stents (DES) reduce neointimal hyperplasia compared to bare-metal stents (BMS). Moreover, the later generation DES, due to its biocompatible polymer coatings and stent design, allows for greater deliverability, improved endothelial healing and therefore less restenosis and thrombus generation. However, data on the safety and performance of DES in large cohorts of AMI is still limited. AIM: To compare the early outcome of DES vs. BMS in AMI patients. METHODS: This was a prospective, multicentre analysis containing patients from 64 hospitals in Switzerland with AMI undergoing pPCI between 2005 and 2013. The primary endpoint was in-hospital all-cause death, whereas the secondary endpoint included a composite measure of major adverse cardiac and cerebrovascular events (MACCE) of death, reinfarction, and cerebrovascular event. RESULTS: Of 20,464 patients with a primary diagnosis of AMI and enrolled to the AMIS Plus registry, 15,026 were referred for pPCI and 13,442 received stent implantation. 10,094 patients were implanted with DES and 2,260 with BMS. The overall in-hospital mortality was significantly lower in patients with DES compared to those with BMS implantation (2.6% vs. 7.1%,p < 0.001). The overall in-hospital MACCE after DES was similarly lower compared to BMS (3.5% vs. 7.6%, p < 0.001). After adjusting for all confounding covariables, DES remained an independent predictor for lower in-hospital mortality (OR 0.51,95% CI 0.40-0.67, p < 0.001). Since groups differed as regards to baseline characteristics and pharmacological treatment, we performed a propensity score matching (PSM) to limit potential biases. Even after the PSM, DES implantation remained independently associated with a reduced risk of in-hospital mortality (adjusted OR 0.54, 95% CI 0.39-0.76, p < 0.001). CONCLUSIONS: In unselected patients from a nationwide, real-world cohort, we found DES, compared to BMS, was associated with lower in-hospital mortality and MACCE. The identification of optimal treatment strategies of patients with AMI needs further randomised evaluation; however, our findings suggest a potential benefit with DES.

The initial oxidation of transition metal surfaces

Due to their numerous novel technological applications ranging from the example of exhaust catalysts in the automotive industry to the catalytic production of hydro- gen, surface reactions on transition metal substrates have become to be one of the most essential subjects within the surface science community. Although numerous applications exist, there are many details in the different processes that, after many decades of research, remain unknown. There are perhaps as many applications for the corrosion resistant materials such as stainless steels. A thorough knowledge of the details of the simplest reactions occuring on the surfaces, such as oxidation, play a key role in the design of better catalysts, or corrosion resistant materials in the future. This thesis examines the oxidation of metal surfaces from a computational point of view mostly concentrating on copper as a model material. Oxidation is studied from the initial oxidation to the oxygen precovered surface. Important parameters for the initial sticking and dissociation are obtained. The saturation layer is thoroughly studied and the calculated results arecompared with available experimental results. On the saturated surface, some open questions still remain. The present calculations demonstrate, that the saturated part of the surface is excluded from being chemically reactive towards the oxygen molecules. The results suggest, that the reason for the chemical activity of the saturated surface is due to a strain effect occuring between the saturated areas of the surface.

Anatomical UV Exposure in French Outdoor Workers.

BACKGROUND: Solar ultraviolet has been recognized as the main causative factor for skin cancer and is currently classified as a carcinogenic agent by International Agency for Research on Cancer. METHOD: Results from a previous phone survey conducted in 2012 in France were used to assess exposure conditions to sun among outdoor workers. Satellite data were used in combination with an exposure model to assess anatomical exposure. RESULT: The yearly median exposure of the outdoor worker population is 77  kJ/m2 to 116  kJ/m2. Road workers, building workers, and gardeners are the more exposed. About 70% of the yearly dose estimate is due to the cumulative summer and spring exposures. CONCLUSIONS: This study highlights the role of individual factors in anatomical exposure and ranks the most exposed body parts and outdoor occupations. Prevention messages should put emphasis on spring exposure, which is an important contributor to the yearly dose.

Transnational private authority, regulatory space and workers' collective competences: Bringing local contexts and worker agency back in

The impact of transnational private regulation on labour standards remains in dispute. While studies have provided some limited evidence of positive effects on 'outcome standards' such as wages or occupational health and safety, the literature gives little reason to believe that there has been any significant effect on 'process rights' relating primarily to collective workers' voice and social dialogue. This paper probes this assumption by bringing local contexts and worker agency more fully into the picture. It outlines an analytical framework that emphasizes workers' potential to act collectively for change in the regulatory space surrounding the employment relationship. It argues that while transnational private regulation on labour standards may marginally improve workers access to regulatory spaces and their capacity to require the inclusion of enterprises in them, it does little to increase union leverage. The findings are based on empirical research work conducted in Sub-Saharan Africa.

Health care workers' influenza vaccination: motivations and mandatory mask policy

BACKGROUND: Vaccination of health care workers (HCW) against seasonal influenza (SI) is recommended but vaccination rate rarely reach >30%. Vaccination coverage against 2009 pandemic influenza (PI) was 52% in our hospital, whilst a new policy requiring unvaccinated HCW to wear a mask during patient care duties was enforced. AIMS: To investigate the determinants of this higher vaccination acceptance for PI and to look for an association with the new mask-wearing policy. METHODS: A retrospective cohort study, involving HCW of three critical departments of a 1023-bed, tertiary-care university hospital in Switzerland. Self-reported 2009-10 SI and 2009 PI vaccination statuses, reasons and demographic data were collected through a literature-based questionnaire. Descriptive statistics, uni- and multivariate analyses were then performed. RESULTS: There were 472 respondents with a response rate of 54%. Self-reported vaccination acceptance was 64% for PI and 53% for SI. PI vaccination acceptance was associated with being vaccinated against SI (OR 9.5; 95% CI 5.5-16.4), being a physician (OR 7.7; 95% CI 3.1-19.1) and feeling uncomfortable wearing a mask (OR 1.7; 95% CI 1.0-2.8). Main motives for refusing vaccination were: preference for wearing a surgical mask (80% for PI, not applicable for SI) and concerns about vaccine safety (64%, 50%) and efficacy (44%, 35%). CONCLUSIONS: The new mask-wearing policy was a motivation for vaccination but also offered an alternative to non-compliant HCW. Concerns about vaccine safety and efficiency and self-interest of health care workers are still main determinants for influenza vaccination acceptance. Better incentives are needed to encourage vaccination amongst non-physician HCW.