One, two or no record of late neoproterozoic glaciation in South-East Cameroon?

Severe climate changes culminating in at least three major glacial events have been recognized in the Neoproterozoic sedimentary record from many parts of the world Supportive to the global nature of these climatic shifts a considerable amount of data have been acquired from deposits exposed in Pan-African orogenic belts in southwestern and western Africa By comparison published data from the Pan-African belts in Central Africa are scarce We report here evidence of possibly two glacial events recorded in the Mintom Formation that is located on the margin of the Pan-African orogenic Yaounde belt in South-East Cameroon In the absence of reliable radiometric data only maximum and minimum age limits of 640 and 580 Ma respectively can at present be applied to the Mintom Formation The formation consists of two lithostratigraphic ensembles each subdivided in two members (i e in ascending stratigraphic order the Kol Metou Momibole and Atog Adjap Members) The basal ensemble exhibits a typical glacial to post-glacial succession It includes diamictites comprising cobbles and boulders in a massive argillaceous siltstone matrix and laminated siltstones followed by in sharp contact a 2 m-thick massive dolostone that yielded negative delta(13)C values (<-3 parts per thousand. V-PDB) similar to those reported for Marinoan cap carbonates elsewhere However uncertainty remains regarding the glacial influence on the siliciclastic facies because the diamictite is better explained as a mass-flow deposit and diagnostic features such as dropstones have not been seen in the overlying siltstones The Mintom Formation may thus provide an example of an unusual succession of non-glacial diamictite overlain by a truly glacial melt-related cap-carbonate We also report the recent discovery of ice-striated pavements on the structural surface cut in the Mintom Formation suggesting that glaciers developed after the latter had been deposited and deformed during the Pan-African orogeny Striations which consistently exhibit two principal orientations (N60 and N110) were identified in two different localities in the west of the study area on siltstones of the Kol Member and in the east on limestones of the Atog Adjap Member respectively N60-oriented striae indicate ice flow towards the WSW Assigning an age to these features remains problematical because they were not found associated with glaciogenic deposits Two hypotheses can equally be envisaged e either the striated surfaces are correlated (1) to the Gaskiers (or Neoproterozoic post-Gaskiers) glaciation and represent the youngest Ediacaran glacial event documented in the southern Yaounde belt or (2) to the Late Ordovician Hirnantian (Saharan) glaciation thereby providing new data about Hirnantian ice flows in Central Africa (C) 2010 Elsevier Ltd All rights reserved

Reaction microtextures of monazite: Correlation between chemical and age domains in the Nazare Paulista migmatite, SE Brazil

Back-scattered imaging, X-ray element mapping and electron microprobe analyzer (EMPA) chemical dating reveal complex compositional and age zoning in monazite crystals from different layers and textural positions in a garnet-bearing migmatite in SE Brazil. Y-rich (variable Y(2)O(3), averaging 2.5 wt.%) relict cores are preserved in mesosome and melanosome monazite, and correspond to 793 +/- 6 Ma inherited crystals possibly generated in a previous metamorphic event. These cores are overgrown and widely replaced by two generations of monazite, which are present in all migmatite layers. The first, also Y-rich (average 2.5 wt.% Y(2)O(3)), was produced at similar to 635 Ma during prograde metamorphism under subsolidus conditions, while the second has an Y-poor (<1.5 wt.% Y(2)O(3)), low Th/U signature, and precipitated from low Y and HREE anatectic melts produced by reactions in which garnet was inert. Quartz-rich trondhjemitic leucosome represents lower temperature melt (bearing some subsolidus quartz and garnet with included monazite) formed at temperatures below muscovite breakdown; its Y-poor monazite indicates an age of 617 +/- 6 Ma. Granitic leucosomes formed close to peak metamorphic conditions (T>750 degrees C) above muscovite breakdown have their slightly younger character confirmed by a 609 +/- 7 Ma low-Y monazite age. A similar 606 +/- 5 Ma age was obtained for low-Y monazite rims and domains in mesosome and melanosome, and reflects the time of monazite saturation in interstitial granitic melt that was trapped in these layers. Our results confirm that inherited monazite crystals can be preserved during partial melting at temperatures above muscovite breakdown. Moreover, careful textural control aided by X-ray chemical mapping may allow monazite generated at different stages in a similar to 25 Myr prograde metamorphic path to be identified and dated using an electron microprobe. (C) 2008 Elsevier B.V. All rights reserved.

Metamorphic P-T evolution of granulites in the central Ribeira Fold Belt, SE Brazil

Pseudosections, geothermobarometric estimates and careful petrographic observations of gneissic migmatites and granulites from Neoproterozoic central Ribeira Fold Belt (SE Brazil) were performed in order to quantify the metamorphic P-T conditions during prograde and retrograde evolution of the Brasiliano Orogeny. Results establish a prograde metamorphic trajectory from amphibolite facies conditions to metamorphic peak (T = 850 +/- 50 A degrees C; P = 8 +/- 1 kbar) that promoted widespread dehydrationmelting of 30 to 40% of the gneisses and high-grade granitization. After the metamorphic peak, migmatites evolved with cooling and decompression to T a parts per thousand 500 A degrees C and P a parts per thousand 5 kbar coupled with aH2O increase, replacing the high-grade paragenesis plagioclase-quartz-K-feldspar-garnet by quartz-biotite-sillimanite-(muscovite). Cordierite absence, microtextural observations and P-T results constrain the migmatite metamorphic evolution in the pseudosections as a clockwise P-T path with retrograde cooling and decompression. High-temperature conditions further dehydrated the lower crust with biotite and amphibole-dehydration melting and granulite formation coupled with 10% melt generation. Granulites can thus be envisaged as middle to lower crust dehydrated restites. Granulites were slowly (nearly isobarically) cooled, followed by late exhumation/retrograde rapid decompression and cooling, reflecting a two step P-T path. This retrograde evolution, coupled with water influx, chemically reequilibrated the rocks from granulite to amphibolite/greenschist facies, promoting the replacement of the plagioclase-quartz-garnet-hypersthene peak assemblage by quartz-biotite- K-feldspar symplectites.

Sr-Nd isotopic evidence for crustal contamination in the Niquelandia complex, Goias, Central Brazil

The Niquelandia complex is a Neoproterozoic mafic-ultramafic intrusion resulting from fractional crystallization of primary picritic basalt intrusions. It consists of two layered sequences: a lower and larger one (LS), where four stratigraphic units exhibit an upward decrease of ultramafic layers and increase of gabbroic layers; an upper, smaller sequence (US), separated from LS by a high-temperature shear zone and consisting of two stratigraphic units (gabbros + anorthosites and amphibolites). Nd and Sr isotopic analyses and rare earth element (REE) profiles provide evidence that the complex suffered important crustal contamination. The LS isotopic array trends from a DM region with positive epsilon Nd and moderately positive epsilon Sr towards a field occupied by crustal xenoliths, especially abundant in the upper LS (negative epsilon Nd and large, positive E:Sr). Each LS stratigraphic unit is distinct from the next underlying unit, showing lower epsilon Nd and higher epsilon Sr, suggesting inputs of fresh magma and mixing with the contaminated, residual magma. The US is characterised by a relatively high variation of epsilon Nd and constant epsilon Sr. REE patterns vary within each unit from LREE depleted to LREE enriched in the samples having lower epsilon Nd and higher epsilon Sr. The contamination process has been modelled by using the EC-AFC algorithms from [Spera, F.J., Bohrson, W.A., 2001. Energy-constrained open-system magmatic processes 1: general model and energy-constrained assimilation and fractional crystallization (EC-AFC) formulation. J. Petrology 42, 999-1018]. The differences between the LS and US isotopic arrays are consistent with contamination by the same crustal component, provided that its melting degree was higher in LS than in US. The different degrees of anatexis are explained by the heat budget released from the magma, higher in LS (because of its larger mass) than in US. Comparison of the correlations between isotopes and incompatible trace element ratios of the models and of the gabbros shows some differences, which are demonstrably related with the variable amount of cumulus phases and trapped melt in the gabbros. (c) 2007 Elsevier Ltd. All rights reserved.

Age and geochemistry of mantle peridotites and diorite dykes from the Baldissero body: Insights into the Paleozoic-Mesozoic evolution of the Southern Alps

Trace element and isotopic data obtained for mantle spinel Iherzolites and diorite dykes from the Baldissero massif (Ivrea-Verbano Zone, Western Italy) provide new, valuable constraints on the petrologic and geodynamic evolution of the Southern Alps in Paleozoic to Mesozoic times. Whole rock and mineral chemistry indicates that Baldissero Iherzolites can be regarded as refractory mantle residues following limited melt extraction. In particular, the Light Rare Earth Elements (LREE)-depleted and fractionated compositions of whole rock and clinopyroxene closely match modelling results for refractory residues after low degrees (similar to 4-5%) of near-fractional melting of depleted mantle, possibly under garnet-facies conditions. Following this, the peridotite sequence experienced subsolidus re-equilibration at lithospheric spinel-facies conditions and intrusion of several generations of dykes. However, Iherzolites far from dykes show very modest metasomatic changes, as evidenced by the crystallisation of accessory titanian pargasite and the occurrence of very slight enrichments in highly incompatible trace elements (e.g. Nb). The Re-Os data for Iherzolites far from the dykes yield a 376 Ma (Upper Devonian) model age that is considered to record a partial melting event related to the Variscan orogenic cycle s.l. Dioritic dykes cutting the mantle sequence have whole rock, clinopyroxene and plagioclase characterised by high radiogenic Nd and low radiogenic Sr, which point to a depleted to slightly enriched mantle source. Whole rock and mafic phases of diorites have high Mg# values that positively correlate with the incompatible trace element concentrations. The peridotite at the dyke contact is enriched in orthopyroxene, iron and incompatible trace elements with respect to the Iherzolites far from dykes. Numerical simulations indicate that the geochemical characteristics of the diorites can be explained by flow of a hydrous, silica-saturated melt accompanied by reaction with the ambient peridotite and fractional crystallisation. The composition of the more primitive melts calculated in equilibrium with the diorite minerals show tholeiitic to transitional affinity. Internal Sm-Nd, three-point isochrons obtained for two dykes suggest an Upper Triassic-Lower Jurassic emplacement age (from 204 31 to 198 29 Ma). Mesozoic igneous events are unknown in the southern Ivrea-Verbano Zone (IVZ), but the intrusion of hydrous melts, mostly silica-saturated, have been well documented in the Finero region, i.e. the northernmost part of IVZ and Triassic magmatism with calc-alkaline to shoshonitic affinity is abundant throughout the Central-Eastern Alps. The geochemical and chronological features of the Baldissero diorites shed new light on the geodynamic evolution of the Southern Alps before the opening of the Jurassic Tethys. (C) 2010 Elsevier B.V. All rights reserved.

Simultaneous determination of chromium and manganese in alumina by slurry sampling graphite furnace atomic absorption spectrometry using NbC and NaF as modifiers

This paper reports a method for the direct and simultaneous determination of Cr and Mn in alumina by slurry sampling graphite furnace atomic absorption spectrometry (SiS-SIMAAS) using niobium carbide (NbC) as a graphite platform modifier and sodium fluoride (NaF) as a matrix modifier. 350 mu g of Nb were thermally deposited on the platform surface allowing the formation of NbC (mp 3500 degrees C) to minimize the reaction between aluminium and carbon of the pyrolytic platform, improving the graphite tube lifetime up to 150 heating cycles. A solution of 0.2 mol L(-1) NaF was used as matrix modifier for alumina dissolution as cryolite-based melt, allowing volatilization during pyrolysis step. Masses (c.a. 50 mg) of sample were suspended in 30 ml of 2.0% (v/v) of HNO(3). Slurry was manually homogenized before sampling. Aliquots of 20 mu l of analytical solutions and slurry samples were co-injected into the graphite tube with 20 mu l of the matrix modifier. In the best conditions of the heating program, pyrolysis and atomization temperatures were 1300 degrees C and 2400 degrees C, respectively. A step of 1000 degrees C was optimized allowing the alumina dissolution to form cryolite. The accuracy of the proposed method has been evaluated by the analysis of standard reference materials. The found concentrations presented no statistical differences compared to the certified values at 95% of the confidence level. Limits of detection were 66 ng g(-1) for Cr and 102 ng g(-1) for Mn and the characteristic masses were 10 and 13 pg for Cr and Mn, respectively.

A GUI for online presentation of steel and steelmaking ladle temperature data and simulation.

Continuous casting is a casting process that produces steel slabs in a continuous manner with steel being poured at the top of the caster and a steel strand emerging from the mould below. Molten steel is transferred from the AOD converter to the caster using a ladle. The ladle is designed to be strong and insulated. Complete insulation is never achieved. Some of the heat is lost to the refractories by convection and conduction. Heat losses by radiation also occur. It is important to know the temperature of the melt during the process. For this reason, an online model was previously developed to simulate the steel and ladle wall temperatures during the ladle cycle. The model was developed as an ODE based model using grey box modeling technique. The model’s performance was acceptable and needed to be presented in a user friendly way. The aim of this thesis work was basically to design a GUI that presents steel and ladle wall temperatures calculated by the model and also allow the user to make adjustments to the model. This thesis work also discusses the sensitivity analysis of different parameters involved and their effects on different temperature estimations.

Solar Collectors for Historic Homes : Linking consumption to perceptions of space

Reduction of household energy consumption is one of the top issues in contemporary discussions on sustainable consumption. This chapter concerns one way through which consumption of purchased energy for house heating can be reduced; by having a solar thermal system added to one's house. However, the fact that one of the components - the solar collector - usually is situated on the roof or the facade of a building, is a recurrent impediment to such installations. In certain contexts, these attributes may melt into the building, while in others, they may be perceived as problematic. The latter may particularly be the case when the appearance of the building is of major imiportance, as with houses deemed worthy of preservation for coming generations. This chapter draws upon a study carried out in Visby Town, a walled Hanseatic town and a World Heritage site on the island of Gotland, Sweden.

Modeling Ice Cover on Trails at Grand Canyon National Park

This project used data from the National Park Service, the SRTM data set, and recorded weather conditions to predict snow deposition and snow and ice melt in the Grand Canyon National Park. This model, a simplified version of previous research, shows the location of persistent ice and snow on the Canyon slopes in March.

Interações magnéticas e magnetoresistencia em Co/sub 10/ Cu/sub 90/

Foram investigados os efeitos de tratamentos térmicos nas propriedades estruturais, magnéticas e de magnetotransporte eletrônico de fitas de Co10Cu90 rapidamente resfriadas (“melt-spun”) enfatizando o estudo de possíveis relações entre as interações magnéticas entre grãos, camadas e cristais presentes nestes materiais e a magnetoresistência. A análise combinada da evolução estrutural e da intensidade das interações entre os grãos magnéticos mostra claramente o papel de alguns parâmetros estruturais (tamanho e densidade de partículas, distância entre partículas) e da própria intensidade das interações entre as partículas nas propriedades de transporte eletrônico em presença de um campo magnético.

Processos e componentes mantélicos no norte da Patagônia (Argentina) e relações com a subducção Andina : Evidências petrográficas, geoquímicas e isotópicas em xenólitos ultramáficos mantélicos

Xenólitos ultramáficos, carregados até a superfície da Terra por magmatismo básico alcalino intraplaca, fornecem evidências diretas da natureza e processos envolvidos em modificações do manto litosférico subcontinental, como fusão parcial e metassomatismo. Estes xenólitos têm sido utilizados para identificar processos relacionados a evolução da litosfera continental, estimar a composição original do manto e a escala das heterogeneidades mantélicas. Raramente xenólitos ultramáficos mantélicos são encontrados em ambientes convergentes, no entanto na Patagônia (sul da América do Sul), diversas ocorrências são identificadas em basaltos alcalinos na região de arco e back arc da Cordilheira do Andes. Estes xenólitos oportunizam o estudo dos processos de interação entre a cunha mantélica, a placa oceânica subductada e a astenosfera. Nesta dissertação são apresentados dados petrográficos, mineralógicos, geoquímicos e de isótopos de Sr e O em 22 xenólitos ultramáficos de dois centros vulcânicos Mioceno-Holoceno distintos: Cerro del Mojon (41°06’S-70°13’W) e Estancia Alvarez (40°46’S-68°46’W), localizados na borda NW do Platô de Somuncura, norte de Patagônia (Argentina). A suíte de xenólitos ultramáficos do Cerro del Mojon consiste de espinélio dunitos e harzburgitos mantélicos anidros (Grupo1), espinélio lherzolitos mantélicos anidros (Grupo 2a) e hidratados (Grupo 2b) e espinélio clinopiroxenitos crustais (Grupo 3). Os xenólitos mantélicos do Grupo 1 são depletados (empobrecidos em ETR pesados e HFSE, com baixas razões 87Sr/86Sr em Cpx – 0,7028-0.7037), de alta PT (16-19 kbar, 950-1078 ºC), e têm evidências de metassomatismo críptico (enriquecimento em K, Na ETR leves) atribuído a componentes derivados de sedimentos da placa oceânica subductada, EM 2 (87Sr/86Sr em RT até 0,7126, 87Rb/86Sr até 1,66 e δ18O até +6.78‰). Estes valores anomalamente altos foram obtidos em amostras com bolsões de reação ao redor do espinélio, induzidos pela percolação de fluidos metassomáticos sob altas pressões seguida por descompressão (Sp+fluido→ Cpx+Ol+Sp+melt-andesítico-traquítico). Os xenólitos do Grupo 2 são moderadamente depletados (empobrecidos em HFSE, com baixas a altas razões 87Sr/86Sr em RT e Cpx – 0,7031-0,7045 e δ18O +5-6.2‰), de baixa PT (14-15 kbar, 936-942 ºC), e têm evidências de metassomatismo modal e críptico (enriquecimento em ETR leves, Na, K, Ti, Sr, Hf e anfibólio modal). O metassomatismo críptico parece estar relacionado ao mesmo agente metassomatizante do Grupo 1, mas ocorre em menor intensidade. O metassomatismo modal, no entanto, tem outra origem, podendo ser derivado de fontes mantélicas profundas. A quebra do anfibólio metassomático durante a descompressão e ascensão dos xenólitos até a superfície formou bolsões de reação ao redor do anfibólio (Anf→Cpx+Ol+Sp+melts-basálticos & andesíticos). A suíte de xenólitos ultramáficos de Estancia Alvarez consiste de espinélio harzburgitos anidros mantélicos (Grupo 1a) e espinélio dunitos anidros crustais (Grupo 1b), ambos com veios de serpentina. Os xenólitos mantélicos do Grupo 1a são depletados (empobrecidos em ETR leves e HFSE), de profundidades variadas (P entre 11-18 kbar) e de baixa T (877-961 ºC). Estes xenólitos têm enriquecimento em ETR leves, B, Rb e K, que pode estar relacionado a percolação de fluidos ricos em H2O e LILE gerados pela desidratação de filossilicatos dos sedimentos da placa oceânica (EM 2), como evidenciado por veios de serpentina e altas razões 87Sr/86Sr (0,7046-0,7298), 87Rb/86Sr (0,07-5,63) e valores de δ18O (até +7,88‰).

Conflito socioambiental e o papel dos conselhos gestores: a experiência de São Sebastião, São Paulo

A popularização dos conselhos de políticas públicas setoriais foi fortemente ampliada na década de 1990, decorrente principalmente das estratégias de descentralização da Constituição de 1988. Os municípios brasileiros tiveram as responsabilidades federativas ampliadas, especialmente no que tange a questão ambiental e o desenvolvimento urbano. O trabalho analisa como as correntes ambientais e de planejamento urbano se fundem no desenvolvimento da cidade a partir do estudo de caso sobre o município de São Sebastião, litoral norte de São Paulo tendo atenção especial à gênese do Conselho Municipal de Meio Ambiente e Desenvolvimento Urbano como arena de planejamento, conflito e negociação dos distintos interesses locais. Procurou-se discutir, a luz da teoria democrática, os conceitos de participação e deliberação, como alguns dos elementos essenciais ao funcionamento dos conselhos como instrumento de planejamento público e, dessa forma, apontar os limites que o objeto estudado apresenta na gestão compartilhada das políticas públicas locais.

Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes

Desenvolvimento e caracterização de compósitos poli(tereftalato de etileno) reciclado (PET reciclado) com flocos de vidro.

The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate new products, enlarging the cycle of materials and energy which are present. Among the polymeric residues, there is poly (ethylene terephthalate) (PET). PET is used in food packaging, preferably in the bottling of carbonated beverages. The reintegration of post-consumer PET in half can be considered a productive action mitigation of environmental impacts caused by these wastes and it is done through the preparation of several different products at the origin, i.e. food packaging, with recycling rates increasing to each year. This work focused on the development and characterization mechanical, thermal, thermo-mechanical, dynamic mechanical thermal and morphology of the pure recycled PET and recycled PET composites with glass flakes in the weight fraction of 5%, 10% and 20% processed in a single screw extruder, using the following analytical techniques: thermogravimetry (TG), differential scanning calorimetry (DSC), tensile, Izod impact, Rockwell hardness, Vicat softening temperature, melt flow rate, burn rate, dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). The results of thermal analysis and mechanical properties leading to a positive evaluation, because in the thermograms the addition of glass flakes showed increasing behavior in the initial temperatures of thermal decomposition and melting crystalline, Furthermore was observed growing behavior in the mechanical performance of polymer composites, whose morphological structure was observed by SEM, verifying a good distribution of glass flakes, showing difference orientation in the center and in the surface layer of test body of composites with 10 and 20% of glass flakes. The results of DMTA Tg values of the composites obtained from the peak of tan ä showed little reductions due to poor interfacial adhesion between PET and recycled glass flakes.

Processamento e caracterização de compósitos Poli(METACRILATO DE METILA)/Sílica (PMMA/SiO2)

Currently the search for new materials with properties suitable for specific applications has increased the number of researches that aim to address market needs. The poly (methyl methacrylate) (PMMA) is one of the most important polymers of the family of polyacrylates and polymethacrylates, especially for its unique optical properties and weathering resistance, and exceptional hardness and gloss. The development of polymer composites by the addition of inorganic fillers to the PMMA matrix increases the potential use of this polymer in various fields of application. The most commonly used inorganic fillers are particles of silica (SiO2), modified clays, graphite and carbon nanotubes. The main objective of this work is the development of PMMA/SiO2 composites at different concentrations of SiO2, for new applications as engineering plastics. The composites were produced by extrusion of tubular film, and obtained via solution for application to commercial PMMA plates, and also by injection molding, for improved the abrasion and scratch resistance of PMMA without compromising transparency. The effects of the addition of silica particles in the polymer matrix properties were evaluated by the maximum tensile strength, hardness, abrasion and scratch resistance, in addition to preliminary characterization by torque rheometry and melt flow rate. The results indicated that it is possible to use silica particles in a PMMA matrix, and a higher silica concentration produced an increase of the abrasion and scratch resistance, hardness, and reduced tensile strength