A novel vortex flow reactor for the purification of B-phycoerythrin from Porphyridium cruentum

The purification of B-phycoerythrin from a concentrated extract of disrupted Porphyridium cruentum cells was carried out using a new vortex flow reactor design for protein purification. The reactor behaved as an expanded bed in the laminar vortices flow regime where the Streamline DEAE resin was expanded by the axial flow and stabilized by the vortex flow. After the broth culture was centrifuged and resuspended in the adsorption buffer, the concentrated extract of disrupted cells was directly loaded into the vortex flow reactor. The purification of B-phycoerythrin was carried out in two steps: adsorption in the expanded bed and elution from the settled bed. 142.0 mg of B-phycoerythrin was eluted representing a total recovery yield of 86.6%. Prior to B-phycoerythrin purification, the protein adsorption of the vortex flow reactor was characterized through hydrodynamic studies and a dynamic capacity measurement using a standard protein.

Reactor micromolar fotoquímico

: Reactor micromolar fotoquímico. La aplicación consiste en un sistema que permite irradiar de forma controlada un pequeño volumen de cualquier tipo de sistema químico reactivo (homogéneo o heterogéneo) tanto con lámparas artificiales como con luz solar, disponiendo de espejos calibrados concentradores de la irradiación. El dispositivo dispone de un sistema totalmente automatizado que recoge a través de sensores adecuados diversos parámetros importantes para el control de la reacción en estudio: el tiempo de reacción, la irradiación incidente en función del tiempo y la temperatura. Además permite programar la temperatura en función del tiempo, y la irradiación proveniente de lámparas. Debido a la posibilidad de usar contenedores cerrados adaptables a diversas técnicas analíticas (RMN, UV, IR, Gases- Masas), el equipo permite estudiar reacciones fotoquímicas en tiempo real o muy corto, sin perturbar el medio de reacción y controlando automáticamente todos los parámetros externos que influyen en la reacción.

Reactor de flujo de vórtices para la adsorción y purificación de biomoléculas

La invención consiste en la construcción de un reactor de flujo de vórtices para ser utilizado en la cromatografía de adsorción de biomoléculas en lecho expandido y elución de las mismas, partiendo de un alimento, caldo de cultivo o extracto biológico sin clarificar.

Energy requirements for the continuous biohydrogen production from Spirogyra biomass in a sequential batch reactor

The current energy market requires urgent revision for the introduction of renewable, less-polluting and inexpensive energy sources. Biohydrogen (bioH2) is considered to be one of the most appropriate options for this model shift, being easily produced through the anaerobic fermentation of carbohydrate-containing biomass. Ideally, the feedstock should be low-cost, widely available and convertible into a product of interest. Microalgae are considered to possess the referred properties, being also highly valued for their capability to assimilate CO2 [1]. The microalga Spirogyra sp. is able to accumulate high concentrations of intracellular starch, a preferential carbon source for some bioH2 producing bacteria such as Clostridium butyricum [2]. In the present work, Spirogyra biomass was submitted to acid hydrolysis to degrade polymeric components and increase the biomass fermentability. Initial tests of bioH2 production in 120 mL reactors with C. butyricum yielded a maximum volumetric productivity of 141 mL H2/L.h and a H2 production yield of 3.78 mol H2/mol consumed sugars. Subsequently, a sequential batch reactor (SBR) was used for the continuous H2 production from Spirogyra hydrolysate. After 3 consecutive batches, the fermentation achieved a maximum volumetric productivity of 324 mL H2/L.h, higher than most results obtained in similar production systems [3] and a potential H2 production yield of 10.4 L H2/L hydrolysate per day. The H2 yield achieved in the SBR was 2.59 mol H2/mol, a value that is comparable to those attained with several thermophilic microorganisms [3], [4]. In the present work, a detailed energy consumption of the microalgae value-chain is presented and compared with previous results from the literature. The specific energy requirements were determined and the functional unit considered was gH2 and MJH2. It was possible to identify the process stages responsible for the highest energy consumption during bioH2 production from Spirogyra biomass for further optimisation.