Observation and Detection of Underground Cellars in the Duero Basin By GNSS, Lidar and Ground Penetrating Radar Techniques

The underground cellars that appear in different parts of Spain are part of an agricultural landscape dispersed, sometimes damaged, others at risk of disappearing. This paper studies the measurement and display of a group of wineries located in Atauta (Soria), in the Duero River corridor. It is a unique architectural complex, facing rising, built on a smooth hillock as shown in Fig. 1. These constructions are excavated in the ground. The access to the cave or underground cellar has a shape of a narrow tube or down gallery. Immediately after, this space gets wider. There, wine is produced and stored [1]. Observation and detection of the underground cellar, both on the outside and underground, it is essential to make an inventory of the rural patrimony [2]. The geodetection is a noninvasive technique, adequate to accurately locate buried structures in the ground. Works undertaken include topographic work with the LIDAR techniques and integration with data obtained by GNSS and GPR.

Metodología de diseño, observación y cálculo de redes geodésicas exteriores para túneles de gran longitud = Methedology for designing, observing and computing external geodetic networks of long lengths tunnels

RESUMEN: La realización de túneles de gran longitud para ferrocarriles ha adquirido un gran auge en los últimos años. En España se han abordado proyectos de estas características, no existiendo para su ejecución una metodología completa y contrastada de actuación. Las características geométricas, de observación y de trabajo en túneles hace que las metodologías que se aplican en otros proyectos de ingeniería no sean aplicables por las siguientes causas: separación de las redes exteriores e interiores de los túneles debido a la diferente naturaleza de los observables, geometría en el interior siempre desfavorable a los requerimientos de observación clásica, mala visibilidad dentro del túnel, aumento de errores conforme avanza la perforación, y movimientos propios del túnel durante su ejecución por la propia geodinámica activa. Los patrones de observación geodésica usados deben revisarse cuando se ejecutan túneles de gran longitud. Este trabajo establece una metodología para el diseño de redes exteriores. ABSTRACT: The realization of long railway tunnels has acquired a great interest in recent years. In Spain it is necessary to address projects of this nature, but ther is no corresponding methodological framework supporting them. The tunnel observational and working geometrical properties, make that former methodologies used may be unuseful in this case: the observation of the exterior and interior geodetical networks of the tunnel is different in nature. Conditions of visibility in the interior of the tunnels, regardless of the geometry, are not the most advantageous for observation due to the production system and the natural conditions of the tunnels. Errors increase as the drilling of the tunnel progresses, as it becomes problematical to perform continuous verifications along the itinerary itself. Moreover, inherent tunnel movements due to active geodynamics must also be considered. Therefore patterns for geodetic and topographic observations have to be reviewed when very long tunnels are constructed.

Neutronic analysis of the bi-spectral moderator such as that proposed for ESS

This paper reports on design studies concerning a moderator concept which aims to maximize the time averaged flux. The idea is to provide neutron spectra showing two clear maxima, with peaks at View the MathML source and View the MathML source arising from leakage from both cryogenic and thermal moderators. Such a concept known as a bi-spectral moderator (Mezei, 2006 [1]) while proven on a reactor source has only been examined for the ESS 2003 proposal. Filges et al. (2003 [2]), which featured a different design than the current ESS. This paper thus reports on a baseline design for such a moderator concept and shows that it can provide substantial gains in count rates for those applications not requiring high resolution in time-of-flight.

Conceptual design of the beryllium rotating target for the ESS-Bilbao facility

The ESS-Bilbao facility, hosted by the University of the Basque Country (UPV/EHU), envisages the operation of a high-current proton accelerator delivering beams with energies up to 50 MeV. The time-averaged proton current will be 2.25 mA, delivered by 1.5 ms proton pulses with a repetition rate of 20 Hz. This beam will feed a neutron source based upon the Be (p,n) reaction, which will enable the provision of relevant neutron experimentation capabilities. The neutron source baseline concept consists in a rotating beryllium target cooled by water. The target structure will comprise a rotatable disk made of 6061-T6 aluminium alloy holding 20 beryllium plates. Heat dissipation from the target relies upon a distribution of coolant-flow channels. The practical implementation of such a concept is here described with emphasis put on the beryllium plates thermo-mechanical optimization, the chosen coolant distribution system as well as the mechanical behavior of the assembly.

Neutronic design for ESS-Bilbao neutron source

The European Spallation Source-Bilbao (ESS-Bilbao) project plans to build an accelerator facility compliant with the ESS-AB requirements which will be able to drive several experimental stations for research purposes involving intense proton beams with currents up to 75 mA, 50 MeV of final energy, 1.5 ms of pulse length and up to 50 Hz repetition rate. The accelerator will also drive a compact neutron source which will provide useful neutron beams to carry out experiments on moderator optimization, neutron optics devices and general neutron instrumentation as well as preparation work for experiments to be carried out by neutron beam users at the large facilities.

Museo de las medallas desconocidas españolas

Sign.: [ ]5, [calderón]-2[calderón]4, A4, B7, C-Y4, Z5, [calderón]7

Aplicación de los métodos de estimación robusta en el ajuste de observaciones para la detección de errores en una red básica topográfica situada en la ciudad de Valdeluz, Guadalajara.

El objetivo de este proyecto consiste en verificar si existen métodos de ajuste que nos permitan corregir observaciones que llevan introducidas un cierto error grosero. Este error puede ser cometido por el operador al realizar la toma de datos. Cuando se realiza el ajuste por el método clásico de una serie de observaciones que componen una red y éstas llevan incluidas un error grosero, el resultado del ajuste es totalmente inválido, ya que este método tiende a repartir los errores cometidos entre todas las observaciones dando como resultado residuos muy elevados. Normalmente, ante este tipo de casos, el usuario responde invalidando las observaciones con mayor residuo y procediendo a realizar el ajuste sin contar con las observaciones que se anularon. Para llevar a cabo este proceso, debe haber redundancia en la toma de datos, ya que si no se dispusiera de la misma, no podrían eliminarse observaciones. Nuestro objetivo real es llevar a cabo un estudio en el que demostrar que el método de ajuste por técnicas de estimación robusta tiene una capacidad infinitamente superior a los mínimos cuadrados en la detección de errores groseros en observaciones, permitiendo de esta forma al usuario corregir dicho error e incluir esa observación en el ajuste. Este método de ajuste (estimación robusta) comenzó a emplearse en el campo de la fotogrametría. Es por ello que nuestra investigación irá encaminada al empleo de los estimadores robustos en aplicaciones topográficas en las que todavía no han sido utilizados. Se decidió iniciar este estudio porque era un proyecto innovador que nunca había sido realizado y las conclusiones del mismo han sido muy favorables, como se puede comprobar más adelante.

La Influencia de los Productos Hidrofugantes en la Succión del Ladrillo Cerámico Cara Vista

Boletín de la Sociedad Española de Cerámica y Vidrio.

Home automation controller for a water-flow window

Facing the EU energy efficiency and legal scenarios related to buildings (2010/31 EU directive), new sustainable advanced concepts for envelopes are required. These innovative designs must be able to offer an elevated level of energy efficiency based on a high performance architecture. According to this, smart glazings, and particularly active water-flow glazings, represent a promising alternative to other solar control glazings, since they can reduce the building energy demand avoiding well known drawbacks as high cost, glare problems and high response time that affect to other smart glazings. This kind of glazing, as any other active one, needs to be operated by a control system. In order to operate a water-flow based window, a new controller based on an inexpensive microcontroller board has been developed

Ventanas con cámara de agua circulante en edificios de consumo de energía casi nulo

Según la normativa Europea relacionada con la eficiencia energética en edificios, a partir del año 2020 todos los edificios de nueva planta deberán considerarse como Edificios de consumo energético casi nulo o Near zero energy buildings (nZEB). Aunque aún no existe una definición exacta de los requisitos que tendrán que cumplir este tipo de edificios, resulta evidente que deberán tener una demanda energética reducida. Dado que las ventanas pueden llegar a ser responsables de aproximadamente el 30% del consumo energético destinado a acondicionar térmicamente un edificio, constituyen uno de los elementos cuya eficiencia debe mejorarse para lograr este tipo de edificios. Frente a este panorama, las ventanas con cámara de agua circulante constituyen un tipo de ventana dinámica poco conocido, pero cuya contribución a los edificios de consumo de energía casi nulo tanto nuevos como rehabilitados, puede ser muy interesante en climas cálidos como Jos del sur de Europa.

On the free-boundary for an elliptic inverse nonlocal problem arising in the nuclear fusion. A numerical approach

We consider a mathematical model related to the stationary regime of a plasma magnetically confined in a Stellarator device in the nuclear fusion. The mathematical problem may be reduced to an nonlinear elliptic inverse nonlocal two dimensional free{boundary problem. The nonlinear terms involving the unknown functions of the problem and its rearrangement. Our main goal is to determinate the existence and the estimate on the location and size of region where the solution is nonnegative almost everywhere (corresponding to the plasma region in the physical model)

Modelization of an experimental solar test box equipped with a water-flow based window

A study on a water- ow window installed in a test box is presented. This window is composed of two glass panes separated by a chamber through water ows. The ow of water comes from an isolated tank which contains heat water. In order to fully evaluate the water- ow window performance for different room and window sizes, locations and weather conditions, a mathematical model of the whole box is needed. The proposed model, in which conduction heat transfer mechanism is the only considered, is one dimensional and unsteady based upon test box energy balance. The effect of the heat water tank, which feeds the water- ow window, is included in the model by means of a time delay in the source term. Although some previous work about moving uid chamber has been developed, air was used as heat transfer uid and no uid storage was considered. Finally a comparison between the numerical solution and the obtained experimental data is done.

Web 2.0 en Topografía, Cartografía y Fotogrametría

La metodología 2.0 que desarrollamos se basa en la colaboración, compartiendo y trabajando en grupo, con la revisión permanente del entorno de enseñanza-aprendizaje en el ámbito de la Tecnologías de la Información Geográfica.

Fiestas de Valencia en obsequio de SS. MM. y AA

Segun Palau V, 91265, la fecha de impresión es 1802

A model of economic management of cultural heritage: the rehabilitation of fort christmas as an interpretation center of defensive architecture of the Mediterranean in Cartagena (Spain)

The Cultural Heritage constitutes a way to generate social identities and play an important role in the development of the Spanish Mediterranean cities that opt to sustainable quality tourism. The reflection on the necessity of intervention on this heritage, in addition to establishing what should be done, brings up the need to define the reasons for taking action, why and what-for. These decisions are essential to establish if its maintenance and recovery are economically sustainable. The Project "Cartagena Port of Cultures", with support from the European Union, is an example of effective instrument for ensuring the sustainability of our built heritage conservation. Its main objective was to enable sustainable development of tourism in Cartagena based on sustainability and seasonality. This was achieved through a process of recovery of heritage resources and their optimum promotion and marketing.