The Ciborium or Lantern Tower of Valencia Cathedral: Geometry, Construction and Stability

Early 18th century treatise writer Tomas Vicente Tosca1 includes in his Tratado de la montea y cortes de Canteria [On Masonry Design and Stone Cutting], what is an important documentary source about the lantern of Valencia Cathedral. Tosca writes about this lantern as an example of vaulting over cross arches without the need of buttresses. A geometrical description is followed by an explanation of the structural behavior which manifests his deep understanding of the mechanics of masonry structures. He tries to demonstrate the absence of buttresses supporting his thesis on the appropriate distribution of loads which will reduce the "empujos" [horizontal thrusts] to the point of not requiring more than the thickness of the walls to stand (Tosca [1727] 1992, 227-230). The present article2 assesses T osca' s appreciation studying how loads and the thrusts they generate are transmitted through the different masonry elements that constitute this ciborium. In order to do so, we first present a geometrical analysis and make considerations regarding its materials and construction methods to, subsequently, analyze its stability adopting an equilibrium approach within the theoretical framework of the lower bound limit analysis.

Los agentes de la edificación desde el punto de vista de la Gestión Integral de Proyectos: diferencias y semejanzas entre la Legislación Española y los Estándares Internacionales = Expert agents in the Global Development of a building project: differences and similarities between Spanish and International contexts.

Desde los años 60, crece en Europa y Estados Unidos la preocupación y la necesidad de mejorar los procesos de gerencia de los proyectos de construcción al volverse estos más complejos. Esto ha llevado a la continua aparición de nuevos profesionales desde la fecha citada hasta nuestros días. De ahí la complejidad de conocer las cualidades de cada uno de ellos, así como las funciones a realizar o la formación que deben tener para poder desarrollar el puesto de trabajo según el papel que desempeñan para cada actividad. Muchos agentes son los que pueden intervenir en la edificación, muchas son las funciones que llevan a cabo estos agentes, muchas son las habilidades que se necesitan para realizar estas misiones, y una buena gestión de la edificación es la que hay que desarrollar para lograr el gran éxito. El presente trabajo fin de máster, dirigido a arquitectos, arquitectos técnicos, ingenieros, abogados, economistas y todos los profesionales del sector inmobiliario y de la construcción, trata de resolver todas aquellas dudas sobre los diferentes sujetos que estarán presentes desde la definición del proyecto en la fase inicial hasta el final de la obra, pasando por las fases de pre-construcción, construcción y post-construcción. (ENGLISH VERSION) Since the 1960s, most construction projects have become more and more complex, and new concerns and necessities related to the management of a project have been on the rise in Europe and in the United States. Thence, the need for more specialized professionals in the field has become a common fact, as well as the inclusion of new curricular subjects in most building engineering studies. There are different agents that play a relevant role in a building project; some of them are expected to perform a highly specialized set of functions that require specific management skills for the work to be successful. This research work—aimed mainly at engineers, quantity surveyors, lawyers, economists, real estate and construction professionals—shows the major implications of the building construction process including both pre-tender/construction and post-tender/construction stages as far as the main expert agents are involved.

Use of Headed Reinforcement Bars in Contruction. A Theoretical Approach to Determine the Dimensions of Anchorage Plates and Experimental Tests on Knee Joints Subjected to a Closing Moment

In order to reduce costs and time while improving quality, durability and sustainability in structural concrete constructions, a widely used material nowadays, special care must be taken in some crucial phases of the project and execution, including the structure design and calculation, the dosage, dumping and curing of concrete: another important aspect is the proper design and execution of assembly plans and construction details. The framework, a name designating the whole reinforcement bars cage already assembled as shown in the drawings, can be made up of several components and implies higher or lower industrialization degree. The framework costs constitute about one third of the price per cubic meter placed in concrete works. The best solutions from all points of view are clearly those involving an easier processing to achieve the same goal, and consequently carrying a high degree of industrialization, meaning quality and safety in the work. This thesis aims to provide an indepth analysis of a relatively new type of anchoring by plate known as headed reinforcement bars, which can potentially replace standard or L-shaped hooks, improving the cleaning of construction details and enabling a faster, more flexible, and therefore a more economical assembly. A literature review on the topic and an overview of typical applications is provided, followed by some examples of specific applications in real projects. Since a strict theoretical formulation used to provide the design plate dimensions has not yet been put forward, an equation is proposed for the side-face blowout strength of the anchorage, based on the capacity of concrete to carry concentrated loads in cases in which no transverse reinforcement is provided. The correlation of the calculated ultimate load with experimental results available in the literature is given. Besides, the proposed formulation can be expanded to cases in which a certain development length is available: using a software for nonlinear finite element analysis oriented to the study of reinforced concrete, numerical tests on the bond-bearing interaction are performed. The thesis ends with a testing of eight corner joints subjected to a closing moment, held in the Structures Laboratory of the Polytechnic University of Madrid, aiming to check whether the design of such plates as stated is adequate for these elements and whether an element with plate-anchored reinforcement is equivalent to one with a traditional construction detail.

Evaluación de la distribución de riesgos en los distintos modelos de asociación público-privada para la provisión de infraestructura carretera en México

México es de los pocos países en el mundo que ha realizado dos grandes programas para la construcción de autopistas en colaboración con el sector privado. El primero, fue realizado entre 1989 y 1994, con resultados adversos por el mal diseño del esquema de concesiones; y, el segundo con mejores resultados, en operación desde 2003 mediante nuevos modelos de asociación público-privada (APP). El objetivo de la presente investigación es estudiar los modelos de asociación público-privada empleados en México para la provisión de infraestructura carretera, realizando el análisis y la evaluación de la distribución de riesgos entre el sector público y privado en cada uno de los modelos con el propósito de establecer una propuesta de reasignación de riesgos para disminuir el costo global y la incertidumbre de los proyectos. En la primera parte se describe el estado actual del conocimiento de las asociaciones público-privadas para desarrollar proyectos de infraestructura, incluyendo los antecedentes, la definición y las tipologías de los esquemas APP, así como la práctica internacional de programas como el modelo británico Private Finance Initiative (PFI), resultados de proyectos en la Unión Europea y programas APP en otros países. También, se destaca la participación del sector privado en el financiamiento de la infraestructura del transporte de México en la década de 1990. En los capítulos centrales se aborda el estudio de los modelos APP que se han utilizado en el país en la construcción de la red de carreteras de alta capacidad. Se presentan las características y los resultados del programa de autopistas 1989-94, así como el rescate financiero y las medidas de reestructuración de los proyectos concesionados, aspectos que obligaron a las autoridades mexicanas a cambiar la normatividad para la aprobación de los proyectos según su rentabilidad, modificar la legislación de caminos y diseñar nuevos esquemas de colaboración entre el gobierno y el sector privado. Los nuevos modelos APP vigentes desde 2003 son: nuevo modelo de concesiones para desarrollar autopistas de peaje, modelo de proyectos de prestación de servicios (peaje sombra) para modernizar carreteras existentes y modelo de aprovechamiento de activos para concesionar autopistas de peaje en operación a cambio de un pago. De estos modelos se realizaron estudios de caso en los que se determinan medidas de desempeño operativo (niveles de tráfico, costos y plazos de construcción) y rentabilidad financiera (tasa interna de retorno y valor presente neto). En la última parte se efectúa la identificación, análisis y evaluación de los riesgos que afectaron los costos, el tiempo de ejecución y la rentabilidad de los proyectos de ambos programas. Entre los factores de riesgo analizados se encontró que los más importantes fueron: las condiciones macroeconómicas del país (inflación, producto interno bruto, tipo de cambio y tasa de interés), deficiencias en la planificación de los proyectos (diseño, derecho de vía, tarifas, permisos y estimación del tránsito) y aportaciones públicas en forma de obra. Mexico is one of the few countries in the world that has developed two major programs for highway construction in collaboration with the private sector. The first one was carried out between 1989 and 1994 with adverse outcomes due to the wrong design of concession schemes; and, the second one, in operation since 2003, through new public-private partnership models (PPPs). The objective of this research is to study public-private partnership models used in Mexico for road infrastructure provision, performing the analysis and evaluation of risk’s distribution between the public and the private sector in each model in order to draw up a proposal for risk’s allocation to reduce the total cost and the uncertainty of projects. The first part describes the current state of knowledge in public-private partnership to develop infrastructure projects, including the history, definition and types of PPP models, as well as international practice of programs such as the British Private Finance Initiative (PFI) model, results in the European Union and PPP programs in other countries. Also, it stands out the private sector participation in financing of Mexico’s transport infrastructure in 1990s. The next chapters present the study of public-private partnerships models that have been used in the country in the construction of the high capacity road network. Characteristics and outcomes of the highway program 1989-94 are presented, as well as the financial bailout and restructuring measures of the concession projects, aspects that forced the Mexican authorities to change projects regulations, improve road’s legislation and design new schemes of cooperation between the Government and the private sector. The new PPP models since 2003 are: concession model to develop toll highways, private service contracts model (shadow toll) to modernize existing roads and highway assets model for the concession of toll roads in operation in exchange for a payment. These models were analyzed using case studies in which measures of operational performance (levels of traffic, costs and construction schedules) and financial profitability (internal rate of return and net present value) are determined. In the last part, the analysis and assessment of risks that affect costs, execution time and profitability of the projects are carried out, for both programs. Among the risk factors analyzed, the following ones were found to be the most important: country macroeconomic conditions (inflation, gross domestic product, exchange rate and interest rate), deficiencies in projects planning (design, right of way, tolls, permits and traffic estimation) and public contributions in the form of construction works.

Sostenibilidad en el sector de la construcción. Sostenibilidad en estructuras y puentes ferroviarios

La escasez de recursos, el cambio climático, la pobreza y el subdesarrollo, los desastres naturales, son solo algunos de los grandes retos a que se enfrenta la humanidad y a los que la economía verde y el desarrollo sostenible tienen que dar respuesta. El concepto sostenible surge a raíz de la necesidad de lograr en todas las actividades humanas un nuevo equilibrio con el medioambiente, la sociedad y la economía, es decir un desarrollo más sostenible. La construcción supone en este nuevo concepto un sector básico, con grandes impactos en los recursos, los residuos, las emisiones, la biodiversidad, el paisaje, las necesidades sociales, la integración, el desarrollo económico del entorno, etc. Es por ello, que la construcción sostenible tiene una importancia esencial como demuestra su amplia aplicación teórica y práctica ya en proyectos de planificación urbana y de edificación. En la ingeniería civil estas aproximaciones son todavía mínimas, aunque ya se están considerando ciertos criterios de sostenibilidad en proyectos de construcción. La construcción consume muchos recursos naturales, económicos y tiene gran incidencia social. En la actualidad su actividad consume un 30% de los recursos extraídos de la tierra y la energía, y en consecuencia genera el 30% de los gases de efecto invernadero y residuos sólidos del mundo (EEA, 2014). Este impacto debería suponer una gran responsabilidad para los profesionales y gobiernos que toman cada día las decisiones de diseño e inversión en la construcción, y su máxima eficiencia debería estar muy presente entre los objetivos. En esta tesis doctoral se plantea un nuevo modelo para la evaluación de la sostenibilidad en los proyectos mediante un sistema de indicadores, basados en las áreas de estudio de las certificaciones de sostenibilidad existentes y en un análisis multi-criterio de cada uno de los axiomas de la sostenibilidad. Como reto principal se marca la propuesta de una metodología que permita identificar, priorizar y seleccionar los indicadores y las variables más importantes de lo que es considerado como una construcción sostenible en el caso de infraestructuras ferroviarias, más concretamente en puentes ferroviarios, y que además sirva para priorizar nuevos proyectos que se adapten a los nuevos objetivos del desarrollo sostenible: el respeto al medioambiente, la integración social y la económica. El objetivo es la aplicación de estos indicadores desde las etapas más tempranas del proyecto: planificación, diseño de alternativas y selección de alternativas. Para ello, en primer lugar, se ha realizado un análisis en profundidad de los distintas organizaciones de certificación de la sostenibilidad mundiales y se ha desarrollado una comparativa entre ellas, detallando el funcionamiento de las más extendidas (BREEAM, LEED, VERDE, DGNB). Tras esto, se ha analizado la herramienta matemática MIVES de análisis multi-criterio para su aplicación, en la tesis, a las infraestructuras ferroviarias. En la segunda parte se desarrolla para las estructuras ferroviarias un nuevo modelo de indicadores, un sistema de ayuda a la decisión multi-criterio basado en los tres axiomas de las sostenibilidad (sociedad, medioambiente y economía), articulados en un árbol de requerimientos inspirado en el método MIVES, que propone una metodología para el caso de las infraestructuras ferroviarias. La metodología MIVES estructura el proceso de decisión en tres ramas: Requisitos, componentes y ciclo de vida. Estas ramas definen los límites de los sistemas. El eje de los requisitos del árbol de los requisitos o se estructura en tres niveles que corresponden al requisito específico: criterios e indicadores. Además, es necesario definen la función del valor para cada indicador, definen el peso de importancia de cada elemento del árbol y finalmente con el calcular el valor de cada alternativa selecciona el mejor de él. La generación de este árbol de requerimientos en estructuras ferroviarias y la medición de los parámetro es original para este tipo de estructuras. Por último, tras el desarrollo de la metodología, se ha aplicado la propuesta metodológica mediante la implementación práctica, utilizando el método propuesto con 2 puentes ferroviarios existentes. Los resultados han mostrado que la herramienta es capaz de establecer una ordenación de las actuaciones coherente y suficientemente discriminante como para que el decisor no tenga dudas cuando deba tomar la decisión. Esta fase, es una de las grandes aportaciones de la tesis, ya que permite diferenciar los pesos obtenidos en cada una de las áreas de estudio y donde la toma de decisión puede variar dependiendo de las necesidades del decisor, la ubicación del puente de estudio etc. ABSTRACT Scarce resources, climate change, poverty and underdevelopment, natural disasters are just some of the great challenges facing humanity and to which the green economy will have to respond. The sustainable concept arises from the need for all human activities in a new equilibrium with the environment, society and the economy, which is known as sustainable development. The construction industry is part of this concept, because of its major impacts on resources, waste, emissions, biodiversity, landscape, social needs, integration, economical development, environment, etc. Therefore, sustainable construction has a critical importance as already demonstrated by its wide application and theoretical practice in urban planning and building projects. In civil engineering, these approaches are still minimal, although some criteria are already taken into account for sustainability in infrastructure projects. The construction industry requires a lot of natural resources, has a real economic relevance and a huge social impact. Currently, it consumes 40% of produced power as well as natural resources extracted from the earth and thus leads to an environmental impact of 40% regarding greenhouse gas emissions and solid wastes (EEA 2014). These repercussions should highly concern our governments and professional of this industry on the decisions they take regarding investments and designs. They must be inflexible in order to ensure that the main concern has to be a maximum efficiency. Major events like the COP21 held in Paris in December 2015 are a concrete signal of the worldwide awareness of the huge impact of each industry on climate. In this doctoral thesis a new model for the evaluation of the sustainability in the projects by means of a system of indicators, based on the areas of study of the existing certifications of sustainability and on an analysis considers multi-criterion of each one of the axioms of the sustainability. The primary aim of this thesis is to study the mode of application of sustainability in projects through a system of indicators. . The main challenge consists of create a methodology suitable to identify, prioritize and select the most important indicators which define if a building is sustainable in the specific case of railway infrastructures. The methodology will help to adapt future projects to the new goals of sustainable development which are respect of nature, social integration and economic relevance. A crucial point is the consideration of these indicators from the very beginning steps of the projects: planning, design and alternatives reflections. First of all, a complete inventory of all world energy certification organizations has been made in order to compare the most representative ones regarding their way of functioning (BREEAM, LEED, VERDE, DGNB). After this, mathematical tool MIVES of analysis has been analyzed multi-criterion for its application, in the thesis, to railway infrastructures. The second part of the thesis is aimed to develop a new model of indicators, inspired by the MIVES method, consisting in a decision-making system based on the 3 foundations of sustainability: nature impact, social concerns, and economic relevance. The methodology MIVES structures the decision process in three axes: Requirements, components and life cycle. These axes define the boundaries of the systems. The axis of requirements o tree requirements is structured in three levels corresponding to specific requirement: criteria and indicators. In addition, is necessary define the value function for each indicator, define the weight of importance of each element of the tree and finally with the calculate the value of each alternative select the best of them. The generation of this tree requirements in railway structures and measuring the parameter is original for this type of structures. Finally, after the development of the methodology, it has validated the methodology through practical implementation, applying the proposed method 2 existing railway bridges. The results showed that the tool is able to establish a coherent management of performances and discriminating enough so that the decision maker should not have doubts when making the decision. This phase, is one of the great contributions of the thesis, since it allows to differentiate the weights obtained in each one from the study areas and where the decision making can vary depending on the necessities of the decisor, the location of the bridge of study etc.

Métodos diferenciales e interferométricos para la evaluación de deformaciones de la corteza terrestre mediante técnicas GNSS e InSAR = Differential and interferometric methods for evaluation of crustal deformation using GNSS and InSAR techniques

La actividad volcánica interviene en multitud de facetas de la propia actividad humana, no siempre negativas. Sin embargo, son más los motivos de peligrosidad y riesgo que incitan al estudio de la actividad volcánica. Existen razones de seguridad que inciden en el mantenimiento del seguimiento y monitorización de la actividad volcánica para garantizar la vida y la seguridad de los asentamientos antrópicos en las proximidades de los edificios volcánicos. En esta tesis se define e implementa un sistema de monitorización de movimientos de la corteza en las islas de Tenerife y La Palma, donde el impacto social que representa un aumento o variación de la actividad volcánica en las islas es muy severo. Aparte de la alta densidad demográfica del Archipiélago, esta población aumenta significativamente, en diferentes periodos a lo largo del año, debido a la actividad turística que representa la mayor fuente de ingresos de las islas. La población y los centros turísticos se diseminan predominantemente a lo largo de las costas y también a lo largo de los flancos de los edificios volcánicos. Quizá el mantenimiento de estas estructuras sociales y socio-económicas son los motivos más importantes que justifican una monitorización de la actividad volcánica en las Islas Canarias. Recientemente se ha venido trabajando cada vez más en el intento de predecir la actividad volcánica utilizando los nuevos sistemas de monitorización geodésica, puesto que la actividad volcánica se manifiesta anteriormente por deformación de la corteza terrestre y cambios en la fuerza de la gravedad en la zona donde más tarde se registran eventos volcánicos. Los nuevos dispositivos y sensores que se han desarrollado en los últimos años en materias como la geodesia, la observación de la Tierra desde el espacio y el posicionamiento por satélite, han permitido observar y medir tanto la deformación producida en el terreno como los cambios de la fuerza de la gravedad antes, durante y posteriormente a los eventos volcánicos que se producen. Estos nuevos dispositivos y sensores han cambiado las técnicas o metodologías geodésicas que se venían utilizando hasta la aparición de los mismos, renovando métodos clásicos y desarrollando otros nuevos que ya se están afianzando como metodologías probadas y reconocidas para ser usadas en la monitorización volcánica. Desde finales de la década de los noventa del siglo pasado se han venido desarrollando en las Islas Canarias varios proyectos que han tenido como objetivos principales el desarrollo de nuevas técnicas de observación y monitorización por un lado y el diseño de una metodología de monitorización volcánica adecuada, por otro. Se presenta aquí el estudio y desarrollo de técnicas GNSS para la monitorización de deformaciones corticales y su campo de velocidades para las islas de Tenerife y La Palma. En su implementación, se ha tenido en cuenta el uso de la infraestructura geodésica y de monitorización existente en el archipiélago a fin de optimizar costes, además de complementarla con nuevas estaciones para dar una cobertura total a las dos islas. Los resultados obtenidos en los proyectos, que se describen en esta memoria, han dado nuevas perspectivas en la monitorización geodésica de la actividad volcánica y nuevas zonas de interés que anteriormente no se conocían en el entorno de las Islas Canarias. Se ha tenido especial cuidado en el tratamiento y propagación de los errores durante todo el proceso de observación, medida y proceso de los datos registrados, todo ello en aras de cuantificar el grado de fiabilidad de los resultados obtenidos. También en este sentido, los resultados obtenidos han sido verificados con otros procedentes de sistemas de observación radar de satélite, incorporando además a este estudio las implicaciones que el uso conjunto de tecnologías radar y GNSS tendrán en un futuro en la monitorización de deformaciones de la corteza terrestre. ABSTRACT Volcanic activity occurs in many aspects of human activity, and not always in a negative manner. Nonetheless, research into volcanic activity is more likely to be motivated by its danger and risk. There are security reasons that influence the monitoring of volcanic activity in order to guarantee the life and safety of human settlements near volcanic edifices. This thesis defines and implements a monitoring system of movements in the Earth’s crust in the islands of Tenerife and La Palma, where the social impact of an increase (or variation) of volcanic activity is very severe. Aside from the high demographic density of the archipelago, the population increases significantly in different periods throughout the year due to tourism, which represents a major source of revenue for the islands. The population and the tourist centres are mainly spread along the coasts and also along the flanks of the volcanic edifices. Perhaps the preservation of these social and socio-economic structures is the most important reason that justifies monitoring volcanic activity in the Canary Islands. Recently more and more work has been done with the intention of predicting volcanic activity, using new geodesic monitoring systems, since volcanic activity is evident prior to eruption because of a deformation of the Earth’s crust and changes in the force of gravity in the zone where volcanic events will later be recorded. The new devices and sensors that have been developed in recent years in areas such as geodesy, the observation of the Earth from space, and satellite positioning have allowed us to observe and measure the deformation produced in the Earth as well as the changes in the force of gravity before, during, and after the volcanic events occur. The new devices and sensors have changed the geodetic techniques and methodologies that were used previously. The classic methods have been renovated and other newer ones developed that are now vouched for as proven recognised methodologies to be used for volcanic monitoring. Since the end of the 1990s, in the Canary Islands various projects have been developed whose principal aim has been the development of new observation and monitoring techniques on the one hand, and the design of an appropriate volcanic monitoring methodology on the other. The study and development of GNSS techniques for the monitoring of crustal deformations and their velocity field is presented here. To carry out the study, the use of geodetic infrastructure and existing monitoring in the archipelago have been taken into account in order to optimise costs, besides complementing it with new stations for total coverage on both islands. The results obtained in the projects, which are described below, have produced new perspectives in the geodetic monitoring of volcanic activity and new zones of interest which previously were unknown in the environment of the Canary Islands. Special care has been taken with the treatment and propagation of errors during the entire process of observing, measuring, and processing the recorded data. All of this was done in order to quantify the degree of trustworthiness of the results obtained. Also in this sense, the results obtained have been verified with others from satellite radar observation systems, incorporating as well in this study the implications that the joint use of radar technologies and GNSS will have for the future of monitoring deformations in the Earth’s crust.

Nagele: un nuevo asentamiento en un paisaje artificial

Nagele es un asentamiento urbano situado en el Noordoostpolder, territorio neerlandés ganado al mar. Fue diseñado por arquitectos de los grupos De 8 en Opbouw entre los que destacaron Rietveld, Van Eesteren, Van Eyck, Bakema, Stam y Ruys. El proyecto se desarrolló entre 1947 y 1956, un periodo de tiempo con formas de proyectar muy ricas en interpretaciones. Los arquitectos pusieron en crisis los planteamientos historicistas de las nuevas poblaciones de los pólderes. Propusieron un nuevo prototipo, una morfología compacta y concéntrica que transmitiría igualdad a una comunidad agrícola, entendida como una sociedad urbana del siglo XX. La administración apoyó la propuesta que convertiría el proyecto en un arriesgado reto por su falta de antecedentes. La vigencia de las formulaciones permanece hoy en día en la ciudad construida, aunque con alteraciones. En los dibujos del proceso se encuentran los principales enunciados teóricos que este trabajo pretende descubrir. El trabajo aborda aspectos no suficientemente explorados, como su relación con el pólder, la evolución de las estrategias proyectivas, la ordenación paisajista y los elementos urbanos. El Noordoostpolder es la culminación de una serie de experiencias multidisciplinares en el reclamo de tierras a gran escala. Se estudia su estructura urbana policéntrica, la parcelación agrícola que origina el proyecto urbano y la vinculación de la vegetación con la infraestructura, proporcionando orientación, protección climática y escala humana, conceptos que impregnan las estrategias del proyecto urbano. La primera fase de la ordenación configuró áreas monofuncionales que respondían a cada una de las cuatro necesidades básicas del método científico de la ciudad higienista. El acontecimiento que marcó el final de la primera fase fue su presentación en el séptimo CIAM de 1949, cuyo título fue Aplicación de la Carta de Atenas. El programa residencial se dividió en clusters organizados en torno a una pradera vecinal central, vinculándose el orden vecinal, urbano y territorial. La segunda fase fue un catalizador de nuevos planteamientos. El proyecto se transformó en un In-between Realm, un escenario teórico donde coexisten fenómenos tradicionalmente antagónicos que Van Eyck denominó Twin Phenomena, convirtiéndose la ciudad en una réplica formal de la ambivalencia de la mente humana. La indefinición espacial no programada en la propuesta anterior se transformó en un conjunto de espacios urbanos, con límites y dimensiones adaptados a la escala humana. El proyecto es anterior a la obra escrita de Van Eyck por lo que estimuló sus enunciados teóricos. Unas ideas también reconocidas en los tres CIAM posteriores en los que también se expuso el proyecto. El diseño paisajista se integra en el proyecto urbano desde sus orígenes. El límite se compone de una barrera boscosa que protege climáticamente, proporciona escala humana y control visual frente a las llanuras infinitas del pólder. Van Eyck sintetizó el proyecto como una habitación verde sin techo, afirmación que dilucida su equivalencia con el de un interior doméstico. Exteriormente la ciudad se convierte en una unidad autónoma del territorio. Interiormente, un sistema jerarquizado de vegetación vinculado a la arquitectura y la infraestructura constituye espacios urbanos de diferentes escalas. La propuesta fue transformada por Boer y Ruys en un nuevo espacio urbano único, no asimilando los conceptos anteriores. El proyecto y construcción de los primeros elementos urbanos consistió en un reparto de tareas a De 8 en Opbouw, hecho que estimula estudiar su relación con el proyecto urbano. La estructura policéntrica organiza las aulas de las escuelas de Van Eyck, las diferentes áreas confesionales del cementerio de Ruys y las unidades residenciales, diseñadas por Stam, Rietveld y Stam-Besse. Los Twin Phenomena alcanzan un acuerdo en el corredor comercial, diseñado por Bakema y Van der Broek. La generación de espacios dentro de otros aparece también en el cementerio, a través de una nueva barrera boscosa y en el sistema de pliegues del muro que configura la iglesia de Bakema y Van der Broek. El proyecto se vincula a un planteamiento holístico, mediante el que el diseño de cada uno de sus elementos tiene en cuenta las estrategias proyectivas del todo del cual forma parte, convirtiéndose, al igual que las obras de De Stijl, en parte de una composición infinita que acerca arte y diseño en la vida cotidiana de la sociedad. La diversidad generacional e ideológica de estos arquitectos convirtió el proyecto en un tablero de juego sobre el que se aplicaron diferentes formas de proyectar la ciudad, ubicando a Nagele en un punto de inflexión del Movimiento Moderno. ABSTRACT The research focuses on the Nagele project, a Dutch urban settlement located in the Noordoostpolder, a territory which was entirely reclaimed from the IJsselmeer lake. It was designed by a group of architects from the De 8 and Opbouw teams, the leading protagonists being Rietveld, Van Eesteren, Van Eyck, Bakema, Stam y Ruys. It was designed from 1947 to 1956, a fruitful period in urban planning. These architects questioned the traditionalist urban design applied to the new populations in the IJsselmeer polders. Facing their principles, the work group proposed a new prototype; a compact and concentric urban pattern to foster equality in a new community of farm labourers, which was recognized by the architects as a twentieth century urban society. The government supported their new proposals. The lack of implementation of the innovatory conceptual statements subjected the project into a high-risk challenge. However, in spite of these difficulties, the basic concepts remain though partially transformed, in the actual city. The project drawings reflect the principle concepts that this work aims to discover. Some approaches that have not been sufficiently studied are tackled in this thesis. Firstly, the project´s relationship with the polder. Secondly, the evolution of projective strategies during the period of urban planning, the landscape design and the design of urban elements. The Noordoostpolder is the culmination of a series of multi-disciplinary experiences in large scale land reclamation, whose polycentric urban structure and agricultural subdivision provide the framework of Nagele. Linking the vegetation to infrastructure fostered orientation, climate protection and human scale; strategies which were repeated, though on a smaller scale, in the actual city. The first phase of the project was composed of mono-functional urban areas which responded to each of the four basic human needs indicated by the scientific method of the functional city. The presentation of the project at the seventh CIAM in 1949 was the event which marked the end of the first phase of the planning. This congress was entitled Implementation of the Athens Charter. The residential program was divided into housing clusters surrounding a central prairie, a pattern which was related to its urban and territorial whole. The second phase of the plan was subjected to a new theoretical approach. The urban planning became an In-between Realm, a theoretical scenario where traditionally antagonistic concepts coexist. Van Eyck named these concepts Twin Phenomena. The city thus conceived of as a counterform of the ambivalence of the human mind where spatial indefinition in the previous proposals was transformed into a Bunch of Places with defined boundaries and dimensions, all of which reflecting human scale. The landscape design was integrated into the urban project from its inception. The limits consist of a green wind-barrier which not only provides climate protection but also provides human scale and visual control towards the unlimited plains of the polder. Van Eyck summarised the project as a green room without a roof. This statement elucidates its equivalence to a domestic interior. Outwardly, the city becomes an autonomous unit on the territory. Inwardly a hierarchical vegetation system is linked to architecture and infrastructure. Together, they configure different scales of urban spaces. The proposal was transformed by Boer and Ruys into a unique urban space without assimilating Van Eyck´s concepts. The study of the Nagele landscape project of Nagele and the writings of Van Eyck verify the fact that many of his theoretical foundations (In-between Realm, Twin Phenomena, Bunch of Places, Right Scale) can be applied not only to architecture and city but also to landscape design. The application of these principles led the Nagele project to become a counterform of Van Eyck´s thinking. The design and construction of the first urban elements involved a distribution of tasks to De 8 en Opbouw, which stimulated their relationship with the urban project. The polycentric structure organised the school classrooms outlined by Van Eyck, the different areas of the cemetery planned by Ruys and the housing clusters designed by Stam, Rietveld and Stam-Besse. The Twin Phenomena concept can be applied in Van der Broek´s shopping corridor. The concept space within another space is also implemented in the cemetery surrounded by a new green barrier, and in the church built by Van der Broek and Bakema, whose spaces are configured by a folding wall. The project takes a holistic approach, which considers the design of each element within the strategies of the whole, where they become parts of an infinite composition, as in the art works of De Stijl fostering art and design to ordinary people´s daily lives. The generational and ideological diversity of these architects turned the project into a game board on which different ways of planning the city were played, obtaining Nagele the distinction of being a turning point of Modernism.

What We Don't Know Can Hurt Us: Clinical Inference Bias and Constructed Memories of Sexual Abuse.

The false memory/recovered memory debate, research regarding the malleability of memory, and the current lack of methods for validating recovered memories all support the view that heightened care is required of therapists dealing with clients whom they suspect have been sexually abused. The judgmental heuristics that underlie the major clinical inference biases of confirmatory bias, biased covariation, base rate fallacies, and schematic processing errors are all relevant to the processes leading to therapist-client constructions of memories of sexual abuse. Suggestions for minimizing each of these biases are offered. Personal motivations of the client and client suggestibility are factors that may contribute to the construction of memories of sexual abuse, and suggestions for minimizing the impact of these motivations are offered. In conclusion, general suggestions for minimizing the impact of clinical inference biases within the sexual abuse treatment context are summarized.

Convention, Tradition, and the New Wave : Assessing Clinician Identity within Behavior Therapy

In the first wave, behaviorists questioned the conventional wisdom that inner experience was relevant to understanding human behavior. In the 1970s, cognitive-behavioral theories emphasized the importance of the cognitive element, not just the environment, in explaining and modifying behavior. The third wave is drawn from advances in basic and applied behavior analysis of language, Eastern mystical traditions, and less empirically oriented therapeutic approaches. Examples include Acceptance and Commitment Therapy (ACT), Dialectical Behavior Therapy (DBT), Functional Analytic Psychotherapy (FAP), and Mindfulness Based Cognitive Therapy (IBCT). This study reports a survey of clinicians and non-clinicians who self-identify with second or third wave approaches, and a group of undergraduate psychology students intended to represent a layperson or folk psychological approach. Their preferences, in the context of 10 clinical vignettes, among 5 different therapeutic responses or interventions that included "ACT-like," "cognitive," and commonsense or "neutral" options were measured. Third wave-oriented respondents exhibited more consistency than others in their preference for interventions that match their self-identified theoretical orientation, however the author suggests that construction of the vignettes may have influenced this result.

Construction of a Sustainable City Park in Ruddle, WV: A Model for Sustainable Park Design in Humid Climates

Three sustainable projects were studied under a sustainable park model for humid climates to determine where their costs lie in terms of installation, maintenance or both. These projects included the use of solar lighting to replace every configuration of conventional lighting, inclusion of a water garden/bog filter and Riparian Buffer System for the purposes of filtering sediments and nutrients out of runoff to prevent contaminated runoff from reaching the river that was adjacent to the park model location and construction of a LEED-inspired building to serve as the concession stand/restrooms building. The aggregate cost savings of instituting all three projects over ten years was $74,120 and the entire project paid itself off in approximately four years.

Geothermal Electricity Generation in Colorado: Actual and Perceived Obstacles to Greater Implementation

The objective of this paper is to provide an analysis of the potential and obstacles to the development of geothermal energy resources in Colorado. Geothermal energy is the only renewable resource that can provide base-load electricity. While Colorado has significant geothermal energy potential, there are no such power plants. Layers of federal and state laws and regulations represent one barrier to further geothermal development. Transmission constraints represent another major barrier. High exploration and construction costs along with high-risk profiles for geothermal projects form another major barrier. Perceived barriers such as misunderstanding the impacts, risks, and benefits of geothermal energy hinder further development. Recommendations are provided to help overcome these obstacles.

Radon gas. Environmental concentration measures and remediation actions in exposed buildings

The main contribution to the radiological impact from natural radiation received by general population is due to the emission of radon (222Rn). The objective of this project is the study of radon gas as a radioactive element in our buildings (existing and future constructions) to avoid its influence in interior rooms. The proposed methodology reflects different aspects of natural radioactivity in buildings, their sources, their control criteria and regulatory framework; aspects related to the presence of radon in our constructions, entryways, measurement methodology for indoor environmental concentration are studied; other protection solutions and remediation measures in both existing buildings and new construction projects are analyzed. In conclusion, the paper presents previous evaluation tools, the analysis of existing concentration and the choice of the most appropriate mitigation / remediation measures depending on each case, through the establishment of different architectural proposals to plan actions against radon where necessary.

Intelligent Decision-Making System Frameworks for a Digital Plan of Work: A Theoretical Investigation for the Construction Industry

The construction industry is characterised by fragmentation and suffers from lack of collaboration, often adopting adversarial working practices to achieve deliverables. For the UK Government and construction industry, BIM is a game changer aiming to rectify this fragmentation and promote collaboration. However it has become clear that there is an essential need to have better controls and definitions of both data deliverables and data classification. Traditional methods and techniques for collating and inputting data have shown to be time consuming and provide little to improve or add value to the overall task of improving deliverables. Hence arose the need in the industry to develop a Digital Plan of Work (DPoW) toolkit that would aid the decision making process, providing the required control over the project workflows and data deliverables, and enabling better collaboration through transparency of need and delivery. The specification for the existing Digital Plan of Work (DPoW) was to be, an industry standard method of describing geometric, requirements and data deliveries at key stages of the project cycle, with the addition of a structured and standardised information classification system. However surveys and interviews conducted within this research indicate that the current DPoW resembles a digitised version of the pre-existing plans of work and does not push towards the data enriched decision-making abilities that advancements in technology now offer. A Digital Framework is not simply the digitisation of current or historic standard methods and procedures, it is a new intelligent driven digital system that uses new tools, processes, procedures and work flows to eradicate waste and increase efficiency. In addition to reporting on conducted surveys above, this research paper will present a theoretical investigation into usage of Intelligent Decision Support Systems within a digital plan of work framework. Furthermore this paper will present findings on the suitability to utilise advancements in intelligent decision-making system frameworks and Artificial Intelligence for a UK BIM Framework. This should form the foundations of decision-making for projects implemented at BIM level 2. The gap identified in this paper is that the current digital toolkit does not incorporate the intelligent characteristics available in other industries through advancements in technology and collation of vast amounts of data that a digital plan of work framework could have access to and begin to develop, learn and adapt for decision-making through the live interaction of project stakeholders.

Constructing, Creating and Contesting Cityscapes. A Socio-Anthropological Approach to Urban Transformation in Southern Xinjiang, People’s Republic of China

This manuscript is based on a PhD thesis submitted at the Institute of Social Anthropology at the University of Bern in 2014. The dissertation was part of the research project „Xinjiang Uyghur Autonomous Region and Chinese Territoriality. The Development of Infrastructure and Han Migration into the Region“ under the supervision of Prof. Dr. Heinzpeter Znoj and financed by the Swiss National Science Foundation SNSF. Madlen Kobi analyzes the architectural and socio-political transformation of public places and spaces in rapidly urbanizing southern Xinjiang, P.R. China, and in doing so pays particular attention to the cities of Aksu and Kaxgar. As the Xinjiang Uyghur Autonomous Region lies in between China and Central Asia, it is especially characterized by differing political, cultural, and religious influences, and, furthermore, due to its being a multiethnic region, by multiple identities. One might expect cultural and social identities in this area to be negotiated by referring to history, religion, or food. However, they also become visible by the construction and reconstruction, if not demolition, of public places, architectural landmarks, and private residences. Based on ethnographic fieldwork performed in 2011 and 2012, the study explores everyday life in a continuously transforming urban environment shaped by the interaction of the interests of government institutions, investment companies, the middle class, and migrant workers, among many other actors. Here, urban planning, modernization, and renewal form a highly sensitive lens through which the author inspects the tense dynamics of ethnic, religious, and class-based affiliations. She respects varieties and complexities while thoroughly grounding unfolding transformation processes in everyday lived experiences. The study provides vivid insights into how urban places and spaces in this western border region of China are constructed, created, and eventually contested.

Sediment problems on irrigation projects in the United States /

Mode of access: Internet.