Development and characterization of a distributed measurement system for the evaluation of voltage quality in electric power networks

The research activity carried out during the PhD course in Electrical Engineering belongs to the branch of electric and electronic measurements. The main subject of the present thesis is a distributed measurement system to be installed in Medium Voltage power networks, as well as the method developed to analyze data acquired by the measurement system itself and to monitor power quality. In chapter 2 the increasing interest towards power quality in electrical systems is illustrated, by reporting the international research activity inherent to the problem and the relevant standards and guidelines emitted. The aspect of the quality of voltage provided by utilities and influenced by customers in the various points of a network came out only in recent years, in particular as a consequence of the energy market liberalization. Usually, the concept of quality of the delivered energy has been associated mostly to its continuity. Hence the reliability was the main characteristic to be ensured for power systems. Nowadays, the number and duration of interruptions are the “quality indicators” commonly perceived by most customers; for this reason, a short section is dedicated also to network reliability and its regulation. In this contest it should be noted that although the measurement system developed during the research activity belongs to the field of power quality evaluation systems, the information registered in real time by its remote stations can be used to improve the system reliability too. Given the vast scenario of power quality degrading phenomena that usually can occur in distribution networks, the study has been focused on electromagnetic transients affecting line voltages. The outcome of such a study has been the design and realization of a distributed measurement system which continuously monitor the phase signals in different points of a network, detect the occurrence of transients superposed to the fundamental steady state component and register the time of occurrence of such events. The data set is finally used to locate the source of the transient disturbance propagating along the network lines. Most of the oscillatory transients affecting line voltages are due to faults occurring in any point of the distribution system and have to be seen before protection equipment intervention. An important conclusion is that the method can improve the monitored network reliability, since the knowledge of the location of a fault allows the energy manager to reduce as much as possible both the area of the network to be disconnected for protection purposes and the time spent by technical staff to recover the abnormal condition and/or the damage. The part of the thesis presenting the results of such a study and activity is structured as follows: chapter 3 deals with the propagation of electromagnetic transients in power systems by defining characteristics and causes of the phenomena and briefly reporting the theory and approaches used to study transients propagation. Then the state of the art concerning methods to detect and locate faults in distribution networks is presented. Finally the attention is paid on the particular technique adopted for the same purpose during the thesis, and the methods developed on the basis of such approach. Chapter 4 reports the configuration of the distribution networks on which the fault location method has been applied by means of simulations as well as the results obtained case by case. In this way the performance featured by the location procedure firstly in ideal then in realistic operating conditions are tested. In chapter 5 the measurement system designed to implement the transients detection and fault location method is presented. The hardware belonging to the measurement chain of every acquisition channel in remote stations is described. Then, the global measurement system is characterized by considering the non ideal aspects of each device that can concur to the final combined uncertainty on the estimated position of the fault in the network under test. Finally, such parameter is computed according to the Guide to the Expression of Uncertainty in Measurements, by means of a numeric procedure. In the last chapter a device is described that has been designed and realized during the PhD activity aiming at substituting the commercial capacitive voltage divider belonging to the conditioning block of the measurement chain. Such a study has been carried out aiming at providing an alternative to the used transducer that could feature equivalent performance and lower cost. In this way, the economical impact of the investment associated to the whole measurement system would be significantly reduced, making the method application much more feasible.

Substructuring approache in state space models for dynamic system parameters identification

In the recent decade, the request for structural health monitoring expertise increased exponentially in the United States. The aging issues that most of the transportation structures are experiencing can put in serious jeopardy the economic system of a region as well as of a country. At the same time, the monitoring of structures is a central topic of discussion in Europe, where the preservation of historical buildings has been addressed over the last four centuries. More recently, various concerns arose about security performance of civil structures after tragic events such the 9/11 or the 2011 Japan earthquake: engineers looks for a design able to resist exceptional loadings due to earthquakes, hurricanes and terrorist attacks. After events of such a kind, the assessment of the remaining life of the structure is at least as important as the initial performance design. Consequently, it appears very clear that the introduction of reliable and accessible damage assessment techniques is crucial for the localization of issues and for a correct and immediate rehabilitation. The System Identification is a branch of the more general Control Theory. In Civil Engineering, this field addresses the techniques needed to find mechanical characteristics as the stiffness or the mass starting from the signals captured by sensors. The objective of the Dynamic Structural Identification (DSI) is to define, starting from experimental measurements, the modal fundamental parameters of a generic structure in order to characterize, via a mathematical model, the dynamic behavior. The knowledge of these parameters is helpful in the Model Updating procedure, that permits to define corrected theoretical models through experimental validation. The main aim of this technique is to minimize the differences between the theoretical model results and in situ measurements of dynamic data. Therefore, the new model becomes a very effective control practice when it comes to rehabilitation of structures or damage assessment. The instrumentation of a whole structure is an unfeasible procedure sometimes because of the high cost involved or, sometimes, because it’s not possible to physically reach each point of the structure. Therefore, numerous scholars have been trying to address this problem. In general two are the main involved methods. Since the limited number of sensors, in a first case, it’s possible to gather time histories only for some locations, then to move the instruments to another location and replay the procedure. Otherwise, if the number of sensors is enough and the structure does not present a complicate geometry, it’s usually sufficient to detect only the principal first modes. This two problems are well presented in the works of Balsamo [1] for the application to a simple system and Jun [2] for the analysis of system with a limited number of sensors. Once the system identification has been carried, it is possible to access the actual system characteristics. A frequent practice is to create an updated FEM model and assess whether the structure fulfills or not the requested functions. Once again the objective of this work is to present a general methodology to analyze big structure using a limited number of instrumentation and at the same time, obtaining the most information about an identified structure without recalling methodologies of difficult interpretation. A general framework of the state space identification procedure via OKID/ERA algorithm is developed and implemented in Matlab. Then, some simple examples are proposed to highlight the principal characteristics and advantage of this methodology. A new algebraic manipulation for a prolific use of substructuring results is developed and implemented.

New developments in state-specific multireference coupled-cluster theory

Coupled-cluster theory in its single-reference formulation represents one of the most successful approaches in quantum chemistry for the description of atoms and molecules. To extend the applicability of single-reference coupled-cluster theory to systems with degenerate or near-degenerate electronic configurations, multireference coupled-cluster methods have been suggested. One of the most promising formulations of multireference coupled cluster theory is the state-specific variant suggested by Mukherjee and co-workers (Mk-MRCC). Unlike other multireference coupled-cluster approaches, Mk-MRCC is a size-extensive theory and results obtained so far indicate that it has the potential to develop to a standard tool for high-accuracy quantum-chemical treatments. This work deals with developments to overcome the limitations in the applicability of the Mk-MRCC method. Therefore, an efficient Mk-MRCC algorithm has been implemented in the CFOUR program package to perform energy calculations within the singles and doubles (Mk-MRCCSD) and singles, doubles, and triples (Mk-MRCCSDT) approximations. This implementation exploits the special structure of the Mk-MRCC working equations that allows to adapt existing efficient single-reference coupled-cluster codes. The algorithm has the correct computational scaling of d*N^6 for Mk-MRCCSD and d*N^8 for Mk-MRCCSDT, where N denotes the system size and d the number of reference determinants. For the determination of molecular properties as the equilibrium geometry, the theory of analytic first derivatives of the energy for the Mk-MRCC method has been developed using a Lagrange formalism. The Mk-MRCC gradients within the CCSD and CCSDT approximation have been implemented and their applicability has been demonstrated for various compounds such as 2,6-pyridyne, the 2,6-pyridyne cation, m-benzyne, ozone and cyclobutadiene. The development of analytic gradients for Mk-MRCC offers the possibility of routinely locating minima and transition states on the potential energy surface. It can be considered as a key step towards routine investigation of multireference systems and calculation of their properties. As the full inclusion of triple excitations in Mk-MRCC energy calculations is computational demanding, a parallel implementation is presented in order to circumvent limitations due to the required execution time. The proposed scheme is based on the adaption of a highly efficient serial Mk-MRCCSDT code by parallelizing the time-determining steps. A first application to 2,6-pyridyne is presented to demonstrate the efficiency of the current implementation.

Compensation, Incentives and Risk: Economic Theory and Russian Practise

Mr. Pechersky set out to examine a specific feature of the employer-employee relationship in Russian business organisations. He wanted to study to what extent the so-called "moral hazard" is being solved (if it is being solved at all), whether there is a relationship between pay and performance, and whether there is a correlation between economic theory and Russian reality. Finally, he set out to construct a model of the Russian economy that better reflects the way it actually functions than do certain other well-known models (for example models of incentive compensation, the Shapiro-Stiglitz model etc.). His report was presented to the RSS in the form of a series of manuscripts in English and Russian, and on disc, with many tables and graphs. He begins by pointing out the different examples of randomness that exist in the relationship between employee and employer. Firstly, results are frequently affected by circumstances outside the employee's control that have nothing to do with how intelligently, honestly, and diligently the employee has worked. When rewards are based on results, uncontrollable randomness in the employee's output induces randomness in their incomes. A second source of randomness involves the outside events that are beyond the control of the employee that may affect his or her ability to perform as contracted. A third source of randomness arises when the performance itself (rather than the result) is measured, and the performance evaluation procedures include random or subjective elements. Mr. Pechersky's study shows that in Russia the third source of randomness plays an important role. Moreover, he points out that employer-employee relationships in Russia are sometimes opposite to those in the West. Drawing on game theory, he characterises the Western system as follows. The two players are the principal and the agent, who are usually representative individuals. The principal hires an agent to perform a task, and the agent acquires an information advantage concerning his actions or the outside world at some point in the game, i.e. it is assumed that the employee is better informed. In Russia, on the other hand, incentive contracts are typically negotiated in situations in which the employer has the information advantage concerning outcome. Mr. Pechersky schematises it thus. Compensation (the wage) is W and consists of a base amount, plus a portion that varies with the outcome, x. So W = a + bx, where b is used to measure the intensity of the incentives provided to the employee. This means that one contract will be said to provide stronger incentives than another if it specifies a higher value for b. This is the incentive contract as it operates in the West. The key feature distinguishing the Russian example is that x is observed by the employer but is not observed by the employee. So the employer promises to pay in accordance with an incentive scheme, but since the outcome is not observable by the employee the contract cannot be enforced, and the question arises: is there any incentive for the employer to fulfil his or her promises? Mr. Pechersky considers two simple models of employer-employee relationships displaying the above type of information symmetry. In a static framework the obtained result is somewhat surprising: at the Nash equilibrium the employer pays nothing, even though his objective function contains a quadratic term reflecting negative consequences for the employer if the actual level of compensation deviates from the expectations of the employee. This can lead, for example, to labour turnover, or the expenses resulting from a bad reputation. In a dynamic framework, the conclusion can be formulated as follows: the higher the discount factor, the higher the incentive for the employer to be honest in his/her relationships with the employee. If the discount factor is taken to be a parameter reflecting the degree of (un)certainty (the higher the degree of uncertainty is, the lower is the discount factor), we can conclude that the answer to the formulated question depends on the stability of the political, social and economic situation in a country. Mr. Pechersky believes that the strength of a market system with private property lies not just in its providing the information needed to compute an efficient allocation of resources in an efficient manner. At least equally important is the manner in which it accepts individually self-interested behaviour, but then channels this behaviour in desired directions. People do not have to be cajoled, artificially induced, or forced to do their parts in a well-functioning market system. Instead, they are simply left to pursue their own objectives as they see fit. Under the right circumstances, people are led by Adam Smith's "invisible hand" of impersonal market forces to take the actions needed to achieve an efficient, co-ordinated pattern of choices. The problem is that, as Mr. Pechersky sees it, there is no reason to believe that the circumstances in Russia are right, and the invisible hand is doing its work properly. Political instability, social tension and other circumstances prevent it from doing so. Mr. Pechersky believes that the discount factor plays a crucial role in employer-employee relationships. Such relationships can be considered satisfactory from a normative point of view, only in those cases where the discount factor is sufficiently large. Unfortunately, in modern Russia the evidence points to the typical discount factor being relatively small. This fact can be explained as a manifestation of aversion to risk of economic agents. Mr. Pechersky hopes that when political stabilisation occurs, the discount factors of economic agents will increase, and the agent's behaviour will be explicable in terms of more traditional models.

Perception of causality in schizophrenia spectrum disorder

Patients with schizophrenia spectrum disorders often maintain deviating views on cause-effect relationships, especially when positive and disorganization symptoms are manifest. Altered perceived causality is prominent in delusional ideation, in ideas of reference, and in the mentalizing ability (theory of mind [ToM]) of patients. Perceiving causal relationships may be understood either as higher order cognitive reasoning or as low-level information processing. In the present study, perception of causality was investigated as a low-level, preattentional capability similar to gestalt-like perceptual organization. Thirty-one patients (24 men and 7 women with mean age 27.7 years) and the same number of healthy control subjects matched to patients with respect to age and sex were tested. A visual paradigm was used in which 2 identical discs move, from opposite sides of a monitor, steadily toward and then past one another. Their coincidence generates an ambiguous, bistable percept (discs either "stream through" or "bounce off" one another). The bouncing perception, ie, perceived causality, is enhanced when auditory stimuli are presented at the time of coincidence. Psychopathology was measured using the Positive and Negative Syndrome Scale. It was found that positive symptoms were strongly associated with increased perceived causality and disorganization with attenuated perceived causality. Patients in general were not significantly different from controls, but symptom subgroups showed specifically altered perceived causality. Perceived causality as a basic preattentional process may contribute to higher order cognitive alterations and ToM deficiencies. It is suggested that cognitive remediation therapy should address both increased and reduced perception of causality.

Unifying energy minimization and mutual information maximization for robust 2D/3D registration of X-ray and CT images

Similarity measure is one of the main factors that affect the accuracy of intensity-based 2D/3D registration of X-ray fluoroscopy to CT images. Information theory has been used to derive similarity measure for image registration leading to the introduction of mutual information, an accurate similarity measure for multi-modal and mono-modal image registration tasks. However, it is known that the standard mutual information measure only takes intensity values into account without considering spatial information and its robustness is questionable. Previous attempt to incorporate spatial information into mutual information either requires computing the entropy of higher dimensional probability distributions, or is not robust to outliers. In this paper, we show how to incorporate spatial information into mutual information without suffering from these problems. Using a variational approximation derived from the Kullback-Leibler bound, spatial information can be effectively incorporated into mutual information via energy minimization. The resulting similarity measure has a least-squares form and can be effectively minimized by a multi-resolution Levenberg-Marquardt optimizer. Experimental results are presented on datasets of two applications: (a) intra-operative patient pose estimation from a few (e.g. 2) calibrated fluoroscopic images, and (b) post-operative cup alignment estimation from single X-ray radiograph with gonadal shielding.

Place for video games : a theoretical and pedagogical framework for multiliteracies learning in English studies

Students are now involved in a vastly different textual landscape than many English scholars, one that relies on the “reading” and interpretation of multiple channels of simultaneous information. As a response to these new kinds of literate practices, my dissertation adds to the growing body of research on multimodal literacies, narratology in new media, and rhetoric through an examination of the place of video games in English teaching and research. I describe in this dissertation a hybridized theoretical basis for incorporating video games in English classrooms. This framework for textual analysis includes elements from narrative theory in literary study, rhetorical theory, and literacy theory, and when combined to account for the multiple modalities and complexities of gaming, can provide new insights about those theories and practices across all kinds of media, whether in written texts, films, or video games. In creating this framework, I hope to encourage students to view texts from a meta-level perspective, encompassing textual construction, use, and interpretation. In order to foster meta-level learning in an English course, I use specific theoretical frameworks from the fields of literary studies, narratology, film theory, aural theory, reader-response criticism, game studies, and multiliteracies theory to analyze a particular video game: World of Goo. These theoretical frameworks inform pedagogical practices used in the classroom for textual analysis of multiple media. Examining a video game from these perspectives, I use analytical methods from each, including close reading, explication, textual analysis, and individual elements of multiliteracies theory and pedagogy. In undertaking an in-depth analysis of World of Goo, I demonstrate the possibilities for classroom instruction with a complex blend of theories and pedagogies in English courses. This blend of theories and practices is meant to foster literacy learning across media, helping students develop metaknowledge of their own literate practices in multiple modes. Finally, I outline a design for a multiliteracies course that would allow English scholars to use video games along with other texts to interrogate texts as systems of information. In doing so, students can hopefully view and transform systems in their own lives as audiences, citizens, and workers.

ANALYSIS AND VISUALIZATION OF FLOW FIELDS USING INFORMATION-THEORETIC TECHNIQUES AND GRAPH-BASED REPRESENTATIONS

Three-dimensional flow visualization plays an essential role in many areas of science and engineering, such as aero- and hydro-dynamical systems which dominate various physical and natural phenomena. For popular methods such as the streamline visualization to be effective, they should capture the underlying flow features while facilitating user observation and understanding of the flow field in a clear manner. My research mainly focuses on the analysis and visualization of flow fields using various techniques, e.g. information-theoretic techniques and graph-based representations. Since the streamline visualization is a popular technique in flow field visualization, how to select good streamlines to capture flow patterns and how to pick good viewpoints to observe flow fields become critical. We treat streamline selection and viewpoint selection as symmetric problems and solve them simultaneously using the dual information channel [81]. To the best of my knowledge, this is the first attempt in flow visualization to combine these two selection problems in a unified approach. This work selects streamline in a view-independent manner and the selected streamlines will not change for all viewpoints. My another work [56] uses an information-theoretic approach to evaluate the importance of each streamline under various sample viewpoints and presents a solution for view-dependent streamline selection that guarantees coherent streamline update when the view changes gradually. When projecting 3D streamlines to 2D images for viewing, occlusion and clutter become inevitable. To address this challenge, we design FlowGraph [57, 58], a novel compound graph representation that organizes field line clusters and spatiotemporal regions hierarchically for occlusion-free and controllable visual exploration. We enable observation and exploration of the relationships among field line clusters, spatiotemporal regions and their interconnection in the transformed space. Most viewpoint selection methods only consider the external viewpoints outside of the flow field. This will not convey a clear observation when the flow field is clutter on the boundary side. Therefore, we propose a new way to explore flow fields by selecting several internal viewpoints around the flow features inside of the flow field and then generating a B-Spline curve path traversing these viewpoints to provide users with closeup views of the flow field for detailed observation of hidden or occluded internal flow features [54]. This work is also extended to deal with unsteady flow fields. Besides flow field visualization, some other topics relevant to visualization also attract my attention. In iGraph [31], we leverage a distributed system along with a tiled display wall to provide users with high-resolution visual analytics of big image and text collections in real time. Developing pedagogical visualization tools forms my other research focus. Since most cryptography algorithms use sophisticated mathematics, it is difficult for beginners to understand both what the algorithm does and how the algorithm does that. Therefore, we develop a set of visualization tools to provide users with an intuitive way to learn and understand these algorithms.

Revenue Management in Make-To-Order Manufacturing: Case Study of Capacity Control at ThyssenKrupp VDM

While revenue management (RM) is traditionally considered a tool of service operations, RM shows considerable potential for application in manufacturing operations. The typical challenges in make-to-order manufacturing are fixed manufacturing capacities and a great variety in offered products, going along with pronounced fluctuations in demand and profitability. Since Harris and Pinder in the mid-90s, numerous papers have furthered the understanding of RM theory in this environment. Nevertheless, results to be expected from applying the developed methods to a practical industry setting have yet to be reported. To this end, this paper investigates a possible application of RM at ThyssenKrupp VDM, leading to considerable improvements in several areas.

Social role effects on gender stereotyping in Germany and Japan

Social role theory postulates that gender stereotypes are restrained for men and women observed in the same social role. Cultural differences in the valuation of communal attributes might moderate this effect. To examine this possibility, 288 participants (144 German, 144 Japanese) estimated the communal and agentic attributes of an average man or woman described in a male-dominated role, a female-dominated role, or without role information. We hypothesized and found that in Germany and Japan, participants perceived men as more agentic than women without role information and as similarly agentic in the same role. However, for communion, German and Japanese participants reacted differently. German participants perceived women as more communal than men without role information and in male-dominated roles and perceived men as more communal than women in female-dominated roles. Japanese participants perceived all targets as similarly communal, regardless of role or gender, suggesting that communion is generally expected in Japan.