Utilização de trocadores de calor de placas em espiral em processos da indústria siderúrgica

Stricter environmental policies are shown necessary to ensure an effective pollutant emission control. It is expected for the present year of 2015, that Brazil will assume, at the 21th United Nation's Climate Change Conference (COP21), implementation of commitment to a low carbon economy. This positioning affects the industrial environment, so that is deemed necessary to search for new technologies, less aggressive to the environment, so the adequacies to the new emission policies do not cause a negative effect on production. Almost all of the processes performed in the steel industry demand burning fuel and, therefore, flue gases are sent to the atmosphere. In this present work is discussed the utilization of heat exchangers so, by recovering part of the available heat from the flue gases of certain industrial process, the combustion air is preheated. The combustion air preheat results in less energy requirement, i.e., less need of fuel consumption and, in addition, minor amount of pollutants to be emitted. Due to better fitting to the process, it is studied the utilization of spiral plate heat exchangers. The heat exchanger dimensioning is made by an iterative method implemented in the software Microsoft Excel. Subsequently are analyzed the gains in terms of process's thermal efficiency improvement and the percentage of fuel saving. The latter implies in reduction of the same percentage of greenhouse gases emission

Utilização de trocadores de calor de placas em espiral em processos da indústria siderúrgica

Stricter environmental policies are shown necessary to ensure an effective pollutant emission control. It is expected for the present year of 2015, that Brazil will assume, at the 21th United Nation's Climate Change Conference (COP21), implementation of commitment to a low carbon economy. This positioning affects the industrial environment, so that is deemed necessary to search for new technologies, less aggressive to the environment, so the adequacies to the new emission policies do not cause a negative effect on production. Almost all of the processes performed in the steel industry demand burning fuel and, therefore, flue gases are sent to the atmosphere. In this present work is discussed the utilization of heat exchangers so, by recovering part of the available heat from the flue gases of certain industrial process, the combustion air is preheated. The combustion air preheat results in less energy requirement, i.e., less need of fuel consumption and, in addition, minor amount of pollutants to be emitted. Due to better fitting to the process, it is studied the utilization of spiral plate heat exchangers. The heat exchanger dimensioning is made by an iterative method implemented in the software Microsoft Excel. Subsequently are analyzed the gains in terms of process's thermal efficiency improvement and the percentage of fuel saving. The latter implies in reduction of the same percentage of greenhouse gases emission

Polycyclic aromatic hydrocarbons (PAHs) in a large South American industrial coastal area (Santos Estuary, Southeastern Brazil): Sources and depositional history

Located in southeastern Brazil, the Santos Estuary has the most important industrial and urban population area of South America. Since the 1950`s, increased urbanization and industrialization near the estuary margins has caused the degradation of mangroves and has increased the discharge of sewage and industrial effluents. The main objectives of this work were to determine the concentrations and sources of polycyclic aromatic hydrocarbons (PAHs) in sediment cores in order to investigate the input of these substances in the last 50 years. The PAHs analyses indicated multiple sources of these compounds (oil and pyrolitic origin), basically anthropogenic contributions from biomass, coal and fossil fuels combustion. The distribution of PAHs in the cores was associated with the formation and development of Cubatao industrial complex and the Santos harbour, waste disposal, world oil crisis and the pollution control program, which results in the decrease of organic pollutants input in this area. (C) 2011 Elsevier Ltd. All rights reserved.

Placing unprecedented recent fir growth in a European-wide and Holocene-long context

Forest decline played a pivotal role in motivating Europe's political focus on sustainability around 35 years ago. Silver fir (Abies alba) exhibited a particularly severe dieback in the mid-1970s, but disentangling biotic from abiotic drivers remained challenging because both spatial and temporal data were lacking. Here, we analyze 14 136 samples from living trees and historical timbers, together with 356 pollen records, to evaluate recent fir growth from a continent-wide and Holocene-long perspective. Land use and climate change influenced forest growth over the past millennium, whereas anthropogenic emissions of acidic sulfates and nitrates became important after about 1850. Pollution control since the 1980s, together with a warmer but not drier climate, has facilitated an unprecedented surge in productivity across Central European fir stands. Restricted fir distribution prior to the Mesolithic and again in the Modern Era, separated by a peak in abundance during the Bronze Age, is indicative of the long-term interplay of changing temperatures, shifts in the hydrological cycle, and human impacts that have shaped forest structure and productivity.

Ice-Core Based Assessment of Historical Anthropogenic Heavy Metal (Cd, Cu, Sb, Zn) Emissions in the Soviet Union

The development of strategies and policies aiming at the reduction of environmental exposure to air pollution requires the assessment of historical emissions. Although anthropogenic emissions from the extended territory of the Soviet Union (SU) considerably influenced concentrations of heavy metals in the Northern Hemisphere, Pb is the only metal with long-term historical emission estimates for this region available, whereas for selected other metals only single values exist. Here we present the first study assessing long-term Cd, Cu, Sb, and Zn emissions in the SU during the period 1935–1991 based on ice-core concentration records from Belukha glacier in the Siberian Altai and emission data from 12 regions in the SU for the year 1980. We show that Zn primarily emitted from the Zn production in Ust-Kamenogorsk (East Kazakhstan) dominated the SU heavy metal emission. Cd, Sb, Zn (Cu) emissions increased between 1935 and the 1970s (1980s) due to expanded non-ferrous metal production. Emissions of the four metals in the beginning of the 1990s were as low as in the 1950s, which we attribute to the economic downturn in industry, changes in technology for an increasing metal recovery from ores, the replacement of coal and oil by gas, and air pollution control.

Reflexiones sobre la gestión "integrada" de cuencas hídricas en Buenos Aires : Las redes de organización social en las políticas de saneamiento ambiental

La gestión integrada de cuencas resulta ser una directriz de los organismos internacionales. Desde la gestión local se apela a la participación social, al tiempo que las redes de organizaciones socio-territoriales reclaman mayor injerencia en procesos de control para el saneamiento de las cuencas en Buenos Aires. En cualquier caso, sobrevuelan ideas tales como "integración" (de componentes) y "participación" (de grupos y sectores), que no necesariamente son concebidas unívocamente por todos los actores sociales en juego. Mientras tanto, el control de la contaminación del agua sigue siendo una zona gris en la gestión, a pesar de la creación de autoridades de cuenca. Desde un enfoque de redes, el presente trabajo rastrea en documentos de organismos internacionales, entrevistas a funcionarios locales y miembros de organizaciones territoriales, las acepciones sobre la "gestión integrada" y la "participación" en torno a cuencas metropolitanas degradadas

Reflexiones sobre la gestión "integrada" de cuencas hídricas en Buenos Aires : Las redes de organización social en las políticas de saneamiento ambiental

La gestión integrada de cuencas resulta ser una directriz de los organismos internacionales. Desde la gestión local se apela a la participación social, al tiempo que las redes de organizaciones socio-territoriales reclaman mayor injerencia en procesos de control para el saneamiento de las cuencas en Buenos Aires. En cualquier caso, sobrevuelan ideas tales como "integración" (de componentes) y "participación" (de grupos y sectores), que no necesariamente son concebidas unívocamente por todos los actores sociales en juego. Mientras tanto, el control de la contaminación del agua sigue siendo una zona gris en la gestión, a pesar de la creación de autoridades de cuenca. Desde un enfoque de redes, el presente trabajo rastrea en documentos de organismos internacionales, entrevistas a funcionarios locales y miembros de organizaciones territoriales, las acepciones sobre la "gestión integrada" y la "participación" en torno a cuencas metropolitanas degradadas

Reflexiones sobre la gestión "integrada" de cuencas hídricas en Buenos Aires : Las redes de organización social en las políticas de saneamiento ambiental

La gestión integrada de cuencas resulta ser una directriz de los organismos internacionales. Desde la gestión local se apela a la participación social, al tiempo que las redes de organizaciones socio-territoriales reclaman mayor injerencia en procesos de control para el saneamiento de las cuencas en Buenos Aires. En cualquier caso, sobrevuelan ideas tales como "integración" (de componentes) y "participación" (de grupos y sectores), que no necesariamente son concebidas unívocamente por todos los actores sociales en juego. Mientras tanto, el control de la contaminación del agua sigue siendo una zona gris en la gestión, a pesar de la creación de autoridades de cuenca. Desde un enfoque de redes, el presente trabajo rastrea en documentos de organismos internacionales, entrevistas a funcionarios locales y miembros de organizaciones territoriales, las acepciones sobre la "gestión integrada" y la "participación" en torno a cuencas metropolitanas degradadas

Sistema de alarmas asistenciales para hospitales y residencias

En los hospitales y residencias geriátricas de hoy en día es necesario que tengan un sistema asistencial paciente-enfermera. Este sistema debe ser capaz de controlar y gestionar cada una de las alarmas que se puedan generar en el menor tiempo posible y con la mayor eficacia. Para ello se ha diseñado una solución completa llamada ConnectCare. La arquitectura modular del sistema y la utilización de comunicación IP permiten adaptar el sistema a cada situación proporcionando soluciones específicas a medida. Este sistema se compone de un software llamado Buslogic que gestiona las alarmas en un servidor y de unos dispositivos llamados Fonet Control TCP/IP que posee una doble función: por una parte, sirve como dispositivo intercomunicador telefónico y por otra parte, sirve como dispositivo de gestión de alarmas y control de otros dispositivos externos. Como dispositivo intercomunicador telefónico, se integra en la red telefónica como un terminal de extensión analógica permitiendo la intercomunicación entre el paciente y el personal sanitario. Se hará una breve descripción de la parte intercomunicadora pero no es el objeto de este proyecto. En cambio, en la parte de control se hará más hincapié del diseño y su funcionamiento ya que sí es el objeto de este proyecto. La placa de control permite la recepción de señales provenientes de dispositivos de llamadas cableados, como son pulsadores asistenciales tipo “pera” o tiradores de baño. También es posible recibir señales de alerta de dispositivos no estrictamente asistenciales como detectores de humo o detectores de presencia. Además, permite controlar las luces de las habitaciones de los residentes y actuar sobre otros dispositivos externos. A continuación se mostrará un presupuesto para tener una idea del coste que supone. El presupuesto se divide en dos partes, la primera corresponde en el diseño de la placa de control y la segunda corresponde a la fabricación en serie de la misma. Después hablaremos sobre las conclusiones que hemos sacado tras la realización de este proyecto y sobre las posibles mejoras, terminando con una demostración del funcionamiento del equipo en la vida real. ABSTRACT. Nowadays, in hospitals and nursing homes it is required to have a patient-nurse care system. This system must be able to control and manage each one of the alarms, in the shortest possible time and with maximum efficiency. For this, we have designed a complete solution called ConnectCare. The system architecture is modular and the communication is by IP protocol. This allows the system to adapt to each situation and providing specific solutions. This system is composed by a software, called Buslogic, which it manages the alarms in the PC server and a hardware, called Fonet Control TCP / IP, which it has a dual role: the first role, it is a telephone intercom device and second role, it is a system alarm manager and it can control some external devices. As telephone intercom device, it is integrated into the telephone network and also it is an analog extension terminal allowing intercommunication between the patient and the health personnel. A short description of this intercommunication system will be made, because it is not the subject of this project. Otherwise, the control system will be described with more emphasis on the design and operation point of view, because this is the subject of this project. The control board allows the reception of signals from wired devices, such as pushbutton handset or bathroom pullcord. It is also possible to receive warning signals of non nurse call devices such as smoke detectors or motion detectors. Moreover, it allows to control the lights of the patients’ rooms and to act on other external devices. Then, a budget will be showed. The budget is divided into two parts, the first one is related with the design of the control board and the second one corresponds to the serial production of it. Then, it is discussed the conclusions of this project and the possible improvements, ending with a demonstration of the equipment in real life.

Case study of the effects of atmospheric aerosols and regional haze on agriculture: An opportunity to enhance crop yields in China through emission controls?

The effect of atmospheric aerosols and regional haze from air pollution on the yields of rice and winter wheat grown in China is assessed. The assessment is based on estimates of aerosol optical depths over China, the effect of these optical depths on the solar irradiance reaching the earth’s surface, and the response of rice and winter wheat grown in Nanjing to the change in solar irradiance. Two sets of aerosol optical depths are presented: one based on a coupled, regional climate/air quality model simulation and the other inferred from solar radiation measurements made over a 12-year period at meteorological stations in China. The model-estimated optical depths are significantly smaller than those derived from observations, perhaps because of errors in one or both sets of optical depths or because the data from the meteorological stations has been affected by local pollution. Radiative transfer calculations using the smaller, model-estimated aerosol optical depths indicate that the so-called “direct effect” of regional haze results in an ≈5–30% reduction in the solar irradiance reaching some of China’s most productive agricultural regions. Crop-response model simulations suggest an ≈1:1 relationship between a percentage increase (decrease) in total surface solar irradiance and a percentage increase (decrease) in the yields of rice and wheat. Collectively, these calculations suggest that regional haze in China is currently depressing optimal yields of ≈70% of the crops grown in China by at least 5–30%. Reducing the severity of regional haze in China through air pollution control could potentially result in a significant increase in crop yields and help the nation meet its growing food demands in the coming decades.

NaOH and KOH for preparing activated carbons used in energy and environmental applications

Alkaline hydroxides, especially sodium and potassium hydroxides, are multi-million-ton per annum commodities and strong chemical bases that have large scale applications. Some of them are related with their consequent ability to degrade most materials, depending on the temperature used. As an example, these chemicals are involved in the manufacture of pulp and paper, textiles, biodiesels, soaps and detergents, acid gases removal (e.g., SO2) and others, as well as in many organic synthesis processes. Sodium and potassium hydroxides are strong and corrosive bases, but they are also very stable chemicals that can melt without decomposition, NaOH at 318ºC, and KOH at 360ºC. Hence, they can react with most materials, even with relatively inert ones such as carbon materials. Thus, at temperatures higher than 360ºC these melted hydroxides easily react with most types of carbon-containing raw materials (coals, lignocellulosic materials, pitches, etc.), as well as with most pure carbon materials (carbon fibers, carbon nanofibers and carbon nanotubes). This reaction occurs via a solid-liquid redox reaction in which both hydroxides (NaOH or KOH) are converted to the following main products: hydrogen, alkaline metals and alkaline carbonates, as a result of the carbon precursor oxidation. By controlling this reaction, and after a suitable washing process, good quality activated carbons (ACs), a classical type of porous materials, can be prepared. Such carbon activation by hydroxides, known since long time ago, continues to be under research due to the unique properties of the resulting activated carbons. They have promising high porosity developments and interesting pore size distributions. These two properties are important for new applications such as gas storage (e.g., natural gas or hydrogen), capture, storage and transport of carbon dioxide, electricity storage demands (EDLC-supercapacitors-) or pollution control. Because these applications require new and superior quality activated carbons, there is no doubt that among the different existing activating processes, the one based on the chemical reaction between the carbon precursor and the alkaline hydroxide (NaOH or KOH) gives the best activation results. The present article covers different aspects of the activation by hydroxides, including the characteristics of the resulting activated carbons and their performance in some environment-related applications. The following topics are discussed: i) variables of the preparation method, such as the nature of the hydroxide, the type of carbon precursor, the hydroxide/carbon precursor ratio, the mixing procedure of carbon precursor and hydroxide (impregnation of the precursor with a hydroxide solution or mixing both, hydroxide and carbon precursor, as solids), or the temperature and time of the reaction are discussed, analyzing their effect on the resulting porosity; ii) analysis of the main reactions occurring during the activation process, iii) comparative analysis of the porosity development obtained from different activation processes (e.g., CO2, steam, phosphoric acid and hydroxides activation); and iv) performance of the prepared activated carbon materials on a few applications, such as VOC removal, electricity and gas storages.

Spectrally tunable light source based on light-emitting diodes for custom lighting solutions

This study describes a novel spectral LED-based tunable light source used for customized lighting solutions, especially for the reconstruction of CIE (Commission Internationale de l’Éclairage) standard illuminants. The light source comprises 31 spectral bands ranging from 400 to 700 nm, an integrating cube and a control board with a 16-bit resolution. A minimization algorithm to calculate the weighting values for each channel was applied to reproduce illuminants with precision. The differences in spectral fitting and colorimetric parameters showed that the reconstructed spectra were comparable to the standard, especially for the D65, D50, A and E illuminants. Accurate results were also obtained for illuminants with narrow peaks such as fluorescents (F2 and F11) and a high-pressure sodium lamp (HP1). In conclusion, the developed spectral LED-based light source and the minimization algorithm are able to reproduce any CIE standard illuminants with a high spectral and colorimetric accuracy able to advance available custom lighting systems useful in the industry and other fields such as museum lighting.

Waste water disposal by Connecticut industries, inventory as of January 1, 1961.

"Compiled from basic data files of the Connecticut Water Resources Commission."

Opportunity bulletins.

Mode of access: Internet.