Partial replacement of fishmeal protein by soybean meal protein in the diet of mrigal, Cirrhinus cirrhosus (Ham.) fry

To find out a suitable balance diet for Cirrhinus. cirrhosus fry substituting fish meal protein by full-fat soybean meal protein as dietary protein source for C. cirrhosus fry (1.29g) was studied in 12 aquaria for 60 days. The fishes were fed with four iso-nitrogenous (30% protein) and iso-caloric experimental diets viz. diet 1 (100% fish meal protein), diet 2 (75% fishmeal protein and 25% soybean meal protein), diet 3 (50% fishmeal protein and 50% soybean meal protein) and diet 4 (25% fish meal protein and 75% soybean meal protein). Among the diets the best growth, FCR and PER were obtained with diet 3 fed fishes and no significant difference (p<0.05) was observed between diet 1 and 2 and diet 4 offered the worst performance. Therefore, considering fish growth, FCR and PER, it can be suggested that fish meal protein might be replaced 50% by soybean meal protein in the diet of C. cirrhosus fry for better growth.

Sphingobacterium siyangense sp nov., isolated from farm soil

The taxonomic position of a novel Gram-negative strain, designated Sy1(T), isolated from a farm-soil sample obtained from Jiangsu Province, PR China, was characterized by using a polyphasic approach. The cells were non-motile, non-spore-forming rods. The organism grew optimally at 30-37 degrees C and at pH 6.0-8.0. Based on 16S rRNA gene sequence analysis, strain Sy1(T) is a member of the genus Sphingobacterium; Sphingobacterium multivorum JCM 21156(T) was the nearest relative (98.5% sequence similarity). The predominant fatty acids of strain Sy1T were isoC15:0 (32.90/o), C16:0 (10.9%) and summed feature 3 (iso-C-15:0 2-OH and/or C-16:1 omega 7c; 24.1%). The DNA G + C content was 38.5 mol%. The low level of DNA-DNA relatedness (2.2 %) to S. multivorum JCM 21156 T in combination with differential morphological and biochemical properties demonstrated that strain SY1(T) (=KCTC 22131(T)= CGMCC 1.6855(T)) should be classified as representing a novel species of the genus Sphingobacterium for which the name Sphingobacterium siyangense sp. nov. is proposed.

Flavobacterium anhuiense sp nov., isolated from field soil

A novel strain, D3(T), isolated from a field-soil sample obtained from Anhui Province, PR China, was characterized taxonomically by using a polyphasic approach. The cells were Gram-negative, yellow-pigmented rods devoid of flagella, but showing gliding motility. The organism was able to grow at 5-37 degrees C and at pH 4.0-10.0. A comparative 16S rRNA gene sequence analysis indicated that strain D3(T) is a member of the genus Flavobacterium, sharing highest sequence similarity with the type strain of Flavobacterium defluvii (96.7 %). The major isoprenoid quinone was MK-6 and the predominant fatty acids were iso-C-15:0, summed feature 3 (C-16:1 omega 7c and/or iso-C-15:0 2-OH) and C-16:0. The DNA G + C content was 31.4 mol%. On the basis of phylogenetic and phenotypic data, strain D3(T) represents a novel species within the genus Flavobacterium, for which the name Flavobacterium anhuiense sp. nov. is proposed. The type strain is D3(T) (=KCTC 22128(T)= CGIVICC 1.6859(T)).

The triglyceride fatty acids from heart lipids of Puntius sarana and their variation with different sizes

The triglyceride fatty acid components from the heart lipid of Puntius sarana of different sizes have been characterized by thin-layer and gas liquid chromatography. Csub(10) to Csub(24) acids including both odd-numbered and branched chain acids were detected. The major constituents were ante-iso Csub(10), Csub(10), Csub(12:2), Csub(14), Csub(16), Csub(16:1),Csub(17), Csub(18) , Csub(18:1), Csub(18:2), Csub(18:3) and Csub(20:4) while twenty other acids were detected in lower proportion. The composition of these acids and their variation with size of fish have been investigated and discussed.

Optimum dietary carbohydrate to lipid ratio in stinging catfish, Heteropneustes fossilis (Bloch, 1792)

A feeding trial of 8 weeks was conducted in a static indoor rearing system to investigate the optimum carbohydrate to lipid ratio (CHO:L ratio) in stinging catfish, Heteropneustes fossilis. Five iso-nitrogenous (35% crude protein) and iso-energetic (17.06 kJ gˉ¹ gross energy (GE)) fish meal based diets with varying carbohydrate to lipid (CHO:L g/g) ratios of 0.60, 0.98, 1.53, 2.29 and 3.44 for diets 1-5, were tested, respectively. The diets containing a fixed protein to energy ratio (P:E ratio) of 20.50-mg protein kJˉ¹ GE were fed to triplicate groups of 40 fish (per 70-L tank). Fish were fed 5% of their body weight per day adjusted fortnightly. Diet 1, containing 10% carbohydrate and 17% lipids with a CHO:L ratio of 0.60 produced the poorest (p<0.05) growth rates, feed and protein efficiency. Increasing carbohydrate content in the diets to 26% concomitant with a reduction in lipid content to 11% with a CHO:L ration of 2.29 of diet 5 significantly improved (p<0.05) growth rates, feed and protein efficiency. But did not differ with diet 4, containing CHO:L ratio 2.29. A further increase in dietary carbohydrate up to 31% and a decrease in lipids levels to 9% with a CHO:L ratio ranging from 2.29 to 3.44 (diet 4-5) did not significantly improve the fish performance. Apparent net protein utilisation (ANPU) of fish fed diet 5 was higher (p<0.05) than for diets 1 and 2 but did not differ from diets 3 and 4. Higher lipid deposition (p<0.05) in whole body was observed with decreasing dietary CHO:L ratios as increasing lipid levels. Whole body protein of fish fed varying CHO:L diets did not show any discernible changes among the dietary treatments. This study revealed that H. fossilis can perform equally well on diets containing carbohydrate ranging from 26 to 31%, with 9 to 11% lipid or at CHO:L g/g ratio of 2.29-3.44.

Comparative study of seasonal changes in some blood parameters and genetic polymorphisms of serum antibodies and antigens on red blood cells surface in immature Caspian salmon

Seasonal sampling from 40 immature Caspian salmon were performed in summer, autumn, winter and spring. The maximum ranges of RBC counts, Hct, Hb, WBC count and clotting times were observed in spring, summer, spring, spring and winter, respectively. The minimum amounts of these factors were counted in summer, winter, winter, winter and winter, respectively. Blood Samples were taken from healthy smolt, immature and adult Caspian salmon in spawning time. Hematological determinations and biochemical serum analysis were performed in 101 fish in the three samples. The ranges of hematological values for sample mean were counted. Red blood cell counts were 866600 mm3 and 1259400 mm3 in smolt and adult respectively. Hematocrit was 48.39% in smolt and 44.29% in adult. Hemoglobin was 8.85 gr/dl in smolt and 10.91 gr/dl in adult. White blood cell count was 8781.58 mm3 in smolt and 5217.55 mm3 in adult and mean were differential of WBC, Lymphocyte 90.57%in smolt and73.22% in adult. Neutrophil was 5.12% in smolt and 16.92% in adult, Monocyte were 1.27% in smolt and 4.24% in adult, Clotting time was 282.34 Seconds in smolt and 291.47 seconds in adult MCV, MCH and MCHC also meagered in smolt and adult. Biochemical parameter in immature and mature Caspian salmon meagered .Glucose concentration was 2.97 mmol.l- in immature and 1.99 mmol.l- in mature .Cholesterol concentration was 4.26 mmol.l- in immature and 7.06 mmol.l- in mature. Triglyceride amount was 2.35 mmol.l- in immature and 2.47 mmol.l- in mature and Calcium was 2.47 in immature and 2.61 mmol.l- in mature. An in situ study was made on erythrocytic isoantigens and hetero-antigen and their corresponding iso-and hetero-antibodies of sera by means of hemoagglutination tests on the blood sample, of 450 immature and 50 mature Caspian salmon. The absence of erythrocyte iso-antigens and hetero-antigen and their corresponding iso-and hetero-antibodies were shown by the experimental. It could be indicated an intra-specific variation and differences in species for kelardasht hatchery.

Low molar mass organosiloxane liquid crystals for telecommunication applications

Mixtures of two proprietary low molar mass organosiloxane liquid crystals were studied in order to improve their alignment and optimize their electro-optic properties for telecommunication applications. Over a certain concentration range, mixtures exhibited an isotropic-chiral smectic A-chiral smectic C (Iso-SmA*-SmC*) phase sequence leading to exceptionally good alignment. At room temperature, the spontaneous polarization of these samples was reduced from 225 nC cm -2 in the pure SmC* liquid crystal to as low as 75 nC cm -2 in the mixture. Within this concentration range, the ferroelectric tilt angle could be varied between 35° and 15°, while the rise time decreased by 69.4%. The rise times were < 45 μs for moderate electric fields of ± 10 V μm -1 in the SmC* phase and ∼ 4 μs, independent of electric field, in the SmA* phase. At λ = 1550 nm, these mixtures exhibited very large extinction ratios of {\sim} 60 dB for binary switching in the SmC* phase and ∼ 55 dB continuous variable attenuation in the SmA* phase. © 2012 IEEE.

Liquid fuel visualization using laser-induced fluoresence during cold start

The presence of liquid fuel inside the engine cylinder is believed to be a strong contributor to the high levels of hydrocarbon emissions from spark ignition (SI) engines during the warm-up period. Quantifying and determining the fate of the liquid fuel that enters the cylinder is the first step in understanding the process of emissions formation. This work uses planar laser induced fluorescence (PLIF) to visualize the liquid fuel present in the cylinder. The fluorescing compounds in indolene, and mixtures of iso-octane with dopants of different boiling points (acetone and 3-pentanone) were used to trace the behavior of different volatility components. Images were taken of three different planes through the engine intersecting the intake valve region. A closed valve fuel injection strategy was used, as this is the strategy most commonly used in practice. Background subtraction and masking were both performed to reduce the effect of any spurious fluorescence. The images were analyzed on both a time and crank angle (CA) basis, showing the time of maximum liquid fuel present in the cylinder and the effect of engine events on the inflow of liquid fuel. The results show details of the liquid fuel distribution as it enters the engine as a function of crankangle degree, volatility and location in the cylinder. A. semi-quantitative analysis based on the integration of the image intensities provides additional information on the temporal distribution of the liquid fuel flow. © 1998 Society of Automotive Engineers, Inc.

一种耐高温大型溞HB的培养和生物学的初步研究

本文介绍了夏季在武汉鱼池所采的耐高温大型溞(Daphnia magna HB),对其生长繁殖及其实验室条件下溞的种群密度、食物、温度和光照强度对生长、发育的影响,并对其培养和保种方法进行了研究。连续3年实验室的培养表明,在以新鲜藻类为食物的情况下,此种溢在15—31℃时能正常生长、繁殖。在31℃时,其最大体长为3.65mm,最高怀卵量为26个。根据国际标准法组织所介绍的(ISO 6341)对标准毒物——重铬酸钾的敏感性试验,24hEC_(50)为0.92mg/L(20%)。

Enhanced integrated modelling approach to reconfiguring manufacturing enterprises

Dynamism and uncertainty are real challenges for present day manufacturing enterprises (MEs). Reasons include: an increasing demand for customisation, reduced time to market, shortened product life cycles and globalisation. MEs can reduce competitive pressure by becoming reconfigurable and change-capable. However, modern manufacturing philosophies, including agile and lean, must complement the application of reconfigurable manufacturing paradigms. Choosing and applying the best philosophies and techniques is very difficult as most MEs deploy complex and unique configurations of processes and resource systems, and seek economies of scope and scale in respect of changing and distinctive product flows. It follows that systematic methods of achieving model driven reconfiguration and interoperation of component based manufacturing systems are required to design, engineer and change future MEs. This thesis, titled Enhanced Integrated Modelling Approach to Reconfiguring Manufacturing Enterprises , introduces the development and prototyping a model-driven environment for the design, engineering, optimisation and control of the reconfiguration of MEs with an embedded capability to handle various types of change. The thesis describes a novel systematic approach, namely enhanced integrated modelling approach (EIMA), in which coherent sets of integrated models are created that facilitates the engineering of MEs especially their production planning and control (PPC) systems. The developed environment supports the engineering of common types of strategic, tactical and operational processes found in many MEs. The EIMA is centred on the ISO standardised CIMOSA process modelling approach. Early study led to the development of simulation models during which various CIMOSA shortcomings were observed, especially in its support for aspects of ME dynamism. A need was raised to structure and create semantically enriched models hence forming an enhanced integrated modelling environment. The thesis also presents three industrial case examples: (1) Ford Motor Company; (2) Bradgate Furniture Manufacturing Company; and (3) ACM Bearings Company. In order to understand the system prior to realisation of any PPC strategy, multiple process segments of any target organisation need to be modelled. Coherent multi-perspective case study models are presented that have facilitated process reengineering and associated resource system configuration. Such models have a capability to enable PPC decision making processes in support of the reconfiguration of MEs. During these case studies, capabilities of a number of software tools were exploited such as Arena®, Simul8®, Plant Simulation®, MS Visio®, and MS Excel®. Case study results demonstrated effectiveness of the concepts related to the EIMA. The research has resulted in new contributions to knowledge in terms of new understandings, concepts and methods in following ways: (1) a structured model driven integrated approach to the design, optimisation and control of future reconfiguration of MEs. The EIMA is an enriched and generic process modelling approach with capability to represent both static and dynamic aspects of an ME; and (2) example application cases showing benefits in terms of reduction in lead time, cost and resource load and in terms of improved responsiveness of processes and resource systems with a special focus on PPC; (3) identification and industrial application of a new key performance indicator (KPI) known as P3C the measuring and monitoring of which can aid in enhancing reconfigurability and responsiveness of MEs; and (4) an enriched modelling concept framework (E-MUNE) to capture requirements of static and dynamic aspects of MEs where the conceptual framework has the capability to be extended and modified according to the requirements. The thesis outlines key areas outlining a need for future research into integrated modelling approaches, interoperation and updating mechanisms of partial models in support of the reconfiguration of MEs.

Aeroacoustic source measurement methods for characterizing the sound generated by ducted flow devices with higher-order modes.

The International Organization for Standardization (ISO) method 5136 is widely used in industry and academia to determine the sound power radiated into a duct by fans and other flow devices. The method involves placing the device at the center of a long cylindrical duct with anechoic terminations at each end to eliminate reflections. A single off-axis microphone is used on the inlet and outlet sides that can theoretically capture the plane-wave mode amplitudes but this does not provide enough information to fully account for higher-order modes. In this study, the "two-port" source model is formulated to include higher-order modes and applied for the first three modes. This requires six independent surface pressure measurements on each side or "port." The resulting experimental set-up is much shorter than the ISO rig and does not require anechoic terminations. An array of six external loudspeaker sources is used to characterize the passive part of the two-port model and the set-up provides a framework to account for transmission of higher-order modes through a fan. The relative importance of the higher-order modes has been considered and their effect on inaccuracies when using the ISO method to find source sound power has been analyzed.

Effects of adrenergic agents on the expression of zebrafish (Danio rerio) vitellogenin Ao1

Teleost vitellogenins (VTGs) are large multidomain apolipoproteins, traditionally considered to be estrogen-responsive precursors of the major egg yolk proteins, expressed and synthesized mainly in hepatic tissue. The inducibility of VTGs has made them one of the most frequently used in vivo and in vitro biomarkers of exposure to estrogen-active substances. A significant level of zebrafish vtgAo1, a major estrogen responsive form, has been unexpectedly found in heart tissue in our present studies. Our studies on zebrafish cardiomyopathy, caused by adrenergic agonist treatment, suggest a similar protective function of the cardiac expressed vtgAo1. We hypothesize that its function is to unload surplus intracellular lipids in cardiomyocytes for "reverse triglyceride transportation" similar to that found in lipid transport proteins in mammals. Our results also demonstrated that zebrafish vtgAo1 mRNA expression in heart can be suppressed by both (x-adrenergic agonist, phenylephrine (PE) and beta-adrenergic agonist, isoproterenol (ISO). Furthermore, the strong stimulation of zebrafish vtgAo1 expression in plasma induced by the beta-adrenergic antagonist, MOXIsylyl, was detected by Enzyme-Linked ImmunoSorbent Assay (ELISA). Such stimulation cannot be suppressed by taMOXIfen, an antagonist to estrogen receptors. Thus, Our present data indicate that the production of teleost VTG in vivo can be regulated not only by estrogenic agents, but by adrenergic signals as well. (c) 2009 Elsevier Inc. All rights reserved.

Effects of adrenergic agonists on the extrahepatic expression of vitellogenin Ao1 in heart and brain of the Chinese rare minnow (Gobiocypris rarus)

Teleost vitellogenins (VTGs) are large multidomain apolipoproteins and traditionally considered as the estrogen responsive precursors of the major egg yolk proteins. We identified five clones encoding VTGs, about 16% of the random EST clones from our constructed cDNA library from Chinese rare minnow liver tissue treated with 17 beta-estradiol (E2). Full-length vtgAo1 has been obtained based on the sequence information of four partial cDNA inserts by RACE. The inducibility of the vtgAo1 expression in liver by E2 was confirmed by RT-PCR. The presence of vtgAo1 transcripts have been observed primarily in liver. However. a significant level of the vtgAo1 was found in an unexpected location, heart, particularly in atrial cells by RT-PCR and whole mount in situ hybridization analyses. The vtgAo1 mRNA expression in heart and liver tissue could be suppressed by both alpha-adrenergic agonist, phenylephrine (PE) and beta-adrenergic agonist, isoproterenol (ISO). The expression of VTG in the heart observed in the present studies suggested it may provide protection from surplus intracellular lipids in fish cardiomyocytes as triglyceride transport proteins do in mammals. The results also indicated that the production of teleost vtg in vivo can be regulated by riot only estrogenic agents, but adrenergic signals as well. (c) 2008 Elsevier B.V. All rights reserved.

Physical properties of a hybrid and a nanohybrid dental light-cured resin composite.

This work was aimed at the study of some physical properties of two current light-cured dental resin composites, Rok (hybrid) and Ice (nanohydrid). As filler they both contain strontium aluminosilicate particles, however, with different size distribution, 40 nm-2.5 mum for Rok and 10 nm-1 mum for Ice. The resin matrix of Rok consists of UDMA, that of Ice of UDMA, Bis-EMA and TEGDMA. Degree of conversion was determined by FT-IR analysis. The flexural strength and modulus were measured using a three-point bending set-up according to the ISO-4049 specification. Sorption, solubility and volumetric change were measured after storage of composites in water or ethanol/water (75 vol%) for 1 day, 7 or 30 days. Thermogravimetric analysis was performed in air and nitrogen atmosphere from 30 to 700 degrees C. Surface roughness and morphology of the composites was studied by atomic force microscopy (AFM). The degree of conversion was found to be 56.9% for Rok and 61.0% for Ice. The flexural strength of Rok does not significantly differ from that of Ice, while the flexural modulus of Rok is higher than that of Ice. The flexural strengths of Rok and Ice did not show any significant change after immersion in water or ethanol solution for 30 days. The flexural modulus of Rok and Ice did not show any significant change either after immersion in water for 30 days, while it decreased significantly, even after 1 day immersion, in ethanol solution. Ice sorbed a higher amount of water and ethanol solution than Rok and showed a higher volume increase. Thermogravimetric analysis showed that Rok contains about 80 wt% inorganic filler and Ice about 75 wt%.

Optical properties of phase-separated GaN1-xPx alloys grown by light-radiation heating metal-organic chemical vapour deposition

Based on the results of the temperature-dependent photoluminescence (PL) measurements, the broad PL emission in the phase-separated GaNP alloys with P compositions of 0.03, 0.07, and 0.15 has investigated. The broad PL peaks at 2.18, 2.12 and 1.83 eV are assigned to be an emission from the optical transitions from several trap levels, possibly the iso-electronic trap levels related to nitrogen. With the increasing P composition (from 0.03 to 0.15), these iso-electronic trap levels are shown to become resonant with the conduction band of the alloy and thus optically inactive, leading to the apparent red shift (80-160meV) of the PL peak energy and the trend of the red shift is strengthened. No PL emission peak is observed from the GaN-rich GaNP region, suggesting that the photogenerated carriers in the GaN-rich GaNP region may recombine with each other via non-radiation transitions.