Partial least squares model for dynamic rating of overhead line in wind intensive areas based on field measurements

This paper presents a statistical model for the thermal behaviour of the line model based on lab tests and field measurements. This model is based on Partial Least Squares (PLS) multi regression and is used for the Dynamic Line Rating (DLR) in a wind intensive area. DLR provides extra capacity to the line, over the traditional seasonal static rating, which makes it possible to defer the need for reinforcement the existing network or building new lines. The proposed PLS model has a number of appealing features; the model is linear, so it is straightforward to use for predicting the line rating for future periods using the available weather forecast. Unlike the available physical models, the proposed model does not require any physical parameters of the line, which avoids the inaccuracies resulting from the errors and/or variations in these parameters. The developed model is compared with physical model, the Cigre model, and has shown very good accuracy in predicting the conductor temperature as well as in determining the line rating for future time periods. 

Tunnel spoil classification and applicability of lime addition in weak formations for muck reuse

Tunnel construction planning requires careful consideration of the spoil management part, as this involves environmental, economic and legal requirements. In this paper a methodological approach that considers the interaction between technical and geological factors in determining the features of the resulting muck is proposed. This gives indications about the required treatments as well as laboratory and field characterisation tests to be performed to assess muck recovery alternatives. While this reuse is an opportunity for excavations in good quality homogeneous grounds (e.g. granitic mass), it is critical for complex formation. This approach has been validated, at present, for three different geo-materials resulting from a tunnel excavation carried out with a large diameter Earth Pressure Balance Shield (EPB) through a complex geological succession. Physical parameters and technological features of the three materials have been assessed, according to their valorisation potential, for defining re-utilisation patterns. The methodology proved to be effective and the laboratory tests carried out on the three materials allowed the suitability and treatment effectiveness for each muck recovery strategy to be defined. © 2014 Elsevier Ltd.

Realistic evaluation of EWS and ALERT: factors enabling and constraining implementation.

Realistic Evaluation of EWS and ALERT: factors enabling and constraining implementation Background The implementation of EWS and ALERT in practice is essential to the success of Rapid Response Systems but is dependent upon nurses utilising EWS protocols and applying ALERT best practice guidelines. To date there is limited evidence on the effectiveness of EWS or ALERT as research has primarily focused on measuring patient outcomes (cardiac arrests, ICU admissions) following the implementation of a Rapid Response Team. Complex interventions in healthcare aimed at changing service delivery and related behaviour of health professionals require a different research approach to evaluate the evidence. To understand how and why EWS and ALERT work, or might not work, research needs to consider the social, cultural and organisational influences that will impact on successful implementation in practice. This requires a research approach that considers both the processes and outcomes of complex interventions, such as EWS and ALERT, implemented in practice. Realistic Evaluation is such an approach and was used to explain the factors that enable and constrain the implementation of EWS and ALERT in practice [1]. Aim The aim of this study was to evaluate factors that enabled and constrained the implementation and service delivery of early warnings systems (EWS) and ALERT in practice in order to provide direction for enabling their success and sustainability. Methods The research design was a multiple case study approach of four wards in two hospitals in Northern Ireland. It followed the principles of realist evaluation research which allowed empirical data to be gathered to test and refine RRS programme theory. This approach used a variety of mixed methods to test the programme theories including individual and focus group interviews, observation and documentary analysis in a two stage process. A purposive sample of 75 key informants participated in individual and focus group interviews. Observation and documentary analysis of EWS compliance data and ALERT training records provided further evidence to support or refute the interview findings. Data was analysed using NVIVO8 to categorise interview findings and SPSS for ALERT documentary data. These findings were further synthesised by undertaking a within and cross case comparison to explain the factors enabling and constraining EWS and ALERT. Results A cross case analysis highlighted similarities, differences and factors enabling or constraining successful implementation across the case study sites. Findings showed that personal (confidence; clinical judgement; personality), social (ward leadership; communication), organisational (workload and staffing issues; pressure from managers to complete EWS audit and targets), educational (constraints on training; no clinical educator on ward) and cultural (routine task delegated) influences impact on EWS and acute care training outcomes. There were also differences noted between medical and surgical wards across both case sites. Conclusions Realist Evaluation allows refinement and development of the RRS programme theory to explain the realities of practice. These refined RRS programme theories are capable of informing the planning of future service provision and provide direction for enabling their success and sustainability. References: 1. McGaughey J, Blackwood B, O’Halloran P, Trinder T. J. & Porter S. (2010) A realistic evaluation of Track and Trigger systems and acute care training for early recognition and management of deteriorating ward–based patients. Journal of Advanced Nursing 66 (4), 923-932. Type of submission: Concurrent session Source of funding: Sandra Ryan Fellowship funded by the School of Nursing & Midwifery, Queen’s University of Belfast

How to promote professional competence and identity in social work students

Background: Field placement experiences are frequently cited in the literature as having most impact on a student social worker’s learning as they emerge into the profession. Placements are integral to the development of practice competence and in acquiring a sense of social work identity. However research on the effectiveness of educational strategies used to deliver learning and assess competence during placement are scarce. Internationally, pressures to meet increasing numbers of student enrolments have raised concerns about the potential impact on the quality of placements and practice teaching provided. These pressures may also impact on the appropriate transfer and application of learning to the student’s practice.
Aim: To identify learning activities rated most useful for developing professional practice competence and professional identity of social work students.
Method: Data were collected from 396 students who successfully completed their first or final placement during 2013-2014 and were registered at one of two Universities in Northern Ireland. Students completed a self-administered questionnaire which covered: placement setting and service user group; type of supervision model; frequency of undertaking specific learning activities; who provided the learning; which activities contributed to their developing professional competence and identity and their overall satisfaction.
Our findings confirmed the centrality of the supervisory relationship as the vehicle to enable quality student learning. Shadowing others, receiving regular supervision and receiving constructive feedback were the tasks that students reported as ‘most useful’ to developing professional identity, competence and readiness to practice. Disturbingly over 50% of students reported that linking practice to the professional codes, practice foci and key roles were not valued as ‘useful’ in terms of readiness to practice, feeling competent and developing professional social work identity. These results offer strong insights into how both the University and the practice placement environment needs to better prepare, assess and support students during practice placements in the field.

A tool for the evaluation of slaughter horse welfare during unloading

This study aimed to develop a scientific and practical tool to be used to assess horse welfare after commercial transport over long journeys. A set of physical, behavioural and environmental measures was selected, covering welfare aspects of both transport and unloading procedures. The protocol was field-tested on 51 intra-EU commercial transports arriving at different sites in Italy. Univariate analysis was implemented to look for associations between the input variables (environmental hazards potentially affecting the animal well-being during long transports) and the outcome variables (direct evaluation of the animal condition). No severe welfare impairments were recorded (ie dead on arrival, severe injuries, non-ambulatory animals), while milder ones were more frequent at unloading (eg slipping; 36.7%, reluctance to move; 9.6%). Correlations emerged between ramp slope and falling; type of ramp floor and slipping; fast gait and the presence of gaps between the ramp and the floor. The horses' behaviour was also related to the type of handling procedure used. The measures were repeatable and practical to apply and score during real-time unloading. This work provides a sound basis for a new and practical welfare assessment tool for horses travelling over long journeys. Careful and constant application of this protocol would provide stakeholders with the opportunity to track and monitor changes in the industry over time, as well as to identify high risk areas in transport routines.

Novel DGT method with tri-metal oxide adsorbent for in situ spatiotemporal flux measurement of fluoride in waters and sediments

Natural mineral-water interface reactions drive ecosystem/global fluoride (F−) cycling. These small-scale processes prove challenging to monitoring due to mobilization being highly localized and variable; influenced by changing climate, hydrology, dissolution chemistries and pedogenosis. These release events could be captured in situ by the passive sampling technique, diffusive gradients in thin-films (DGT), providing a cost-effective and time-integrated measurement of F− mobilization. However, attempts to develop the method for F− have been unsuccessful due to the very restrictive operational ranges that most F−-absorbents function within. A new hybrid-DGT technique for F− quantification containing a three-phase fine particle composite (Fesingle bondAlsingle bondCe, FAC) adsorbent was developed and evaluated. Sampler response was validated in laboratory and field deployments, passing solution chemistry QC within ionic strength and pH ranges of 0–200 mmol L−1 and 4.3–9.1, respectively, and exhibiting high sorption capacities (98 ± 8 μg cm−2). FAC-DGT measurements adequately predicted up to weeklong averaged in situ F− fluvial fluxes in a freshwater river and F− concentrations in a wastewater treatment flume determined by high frequency active sampling. While, millimetre-scale diffusive fluxes across the sediment-water interface were modeled for three contrasting lake bed sediments from a F−-enriched lake using the new FAC-DGT platform.

Macrofauna spatial differences within clam dredge-tracks and their implications for short-term fishing effect studies

In situ observations of clam dredging showed that the effects of the dredge on the benthic macrofauna may not be constant during a tow. A sand buffer forms in front of the gear approximately 10m after the beginning of a tow, and this pushes the sediment partially aside.In this study, we analyse differences in abundance, the number of taxa present, diversity, and evenness within sections of dredge-tracks in a disturbed, fished area and a non-fished area along the southern coast of Portugal. These areas were sampled by divers before and after dredge-fishing activity. At each site, three dredge-tracks were produced. These tracks were divided in three longitudinal sections 1start, middle and end) and two transverse sections 1track and edge). Six quadrats were used to sample macrofauna in each section of every track and edge. Our results show differences exist in macro- faunal distribution and abundance across sections of a dredge-track. These differences should be considered in any assessment of the short-term ecological impact of dredges on benthic macrofauna

Joint inversion of magnetotelluric and seismic data for crustal characterization

Tese de doutoramento, Ciências Geofísicas e da Geoinformação (Geofisíca), Universidade de Lisboa, Faculdade de Ciências, 2014

Landslide susceptibility evaluation and validation at a regional scale

Tese de doutoramento, Geografia (Geografia Física), Universidade de Lisboa, Instituto de Geografia e Ordenamento do Território, 2014

Law, technology and water conflicts in developing societies: a case study of tank systems in Tamil Nadu

The study examines the relationship between law, technology and water conflicts from colonial days to the present in traditional (water) tank systems in the south Indian state of Tamil Nadu. Tanks are man-made water systems developed for irrigation and many other purposes in semi-arid areas. The thesis adopts a historical approach to study the development of law, particularly property rights, and takes an empirical approach to investigate the tank conflicts. Archival documents on irrigation development, Case laws, Focus Group Discussions, Open ended Interviews and Field visits to selected tank chains are used as source material for the discussion. Case studies of conflicts are described and analyzed at three levels - Vaigai river basin for a macro level, Kothai Anicut system in Cauvery basin for a meso level, and twenty other interconnected tanks for a micro-level. The thesis deviates from the conventional understanding that tanks as traditional systems as simple and local technologies but considers them to be complex. It argues that the use of commonly held systems such as tanks within the colonial and post colonial laws as state ownership has been the source of many conflicts. In particular, it finds most tank conflicts are a product of progressive and absolute state control over water and the systems established using colonial land revenue administrative law. The law continues to treat tanks as pieces of landed property held by state and the individuals rather than as technology systems that presupposed the regime of property rights introduced after the colonial times. The modern interventions in water including the reservoir building, and altering the hydraulics of rivers and streams aggravate tank conflicts and lead to their further detriment. The study brings the focus to ground realities, and offers new perspectives on understanding tank systems in dynamic ways.

Decentralized Target Tracking based on Multi-Robot Cooperative Triangulation

Target tracking with bearing-only sensors is a challenging problem when the target moves dynamically in complex scenarios. Besides the partial observability of such sensors, they have limited field of views, occlusions can occur, etc. In those cases, cooperative approaches with multiple tracking robots are interesting, but the different sources of uncertain information need to be considered appropriately in order to achieve better estimates. Even though there exist probabilistic filters that can estimate the position of a target dealing with incertainties, bearing-only measurements bring usually additional problems with initialization and data association. In this paper, we propose a multi-robot triangulation method with a dynamic baseline that can triangulate bearing-only measurements in a probabilistic manner to produce 3D observations. This method is combined with a decentralized stochastic filter and used to tackle those initialization and data association issues. The approach is validated with simulations and field experiments where a team of aerial and ground robots with cameras track a dynamic target.

Handheld-assisted field data collection for occupational risk assessment.

A computerized handheld procedure is presented in this paper. It is intended as a database complementary tool, to enhance prospective risk analysis in the field of occupational health. The Pendragon forms software (version 3.2) has been used to implement acquisition procedures on Personal Digital Assistants (PDAs) and to transfer data to a computer in an MS-Access format. The data acquisition strategy proposed relies on the risk assessment method practiced at the Institute of Occupational Health Sciences (IST). It involves the use of a systematic hazard list and semi-quantitative risk assessment scales. A set of 7 modular forms has been developed to cover the basic need of field audits. Despite the minor drawbacks observed, the results obtained so far show that handhelds are adequate to support field risk assessment and follow-up activities. Further improvements must still be made in order to increase the tool effectiveness and field adequacy.

Swiss clinical practice guidelines on field cancerization of the skin.

Actinic keratosis (AK) affects millions of people worldwide, and its prevalence continues to increase. AK lesions are caused by chronic ultraviolet radiation exposure, and the presence of two or more AK lesions along with photodamage should raise the consideration of a diagnosis of field cancerization. Effective treatment of individual lesions as well as field cancerization is essential for good long-term outcomes. The Swiss Registry of Actinic Keratosis Treatment (REAKT) Working Group has developed clinical practice guidelines for the treatment of field cancerization in patients who present with AK. These guidelines are intended to serve as a resource for physicians as to the most appropriate treatment and management of AK and field cancerization based on current evidence and the combined practical experience of the authors. Treatment of AK and field cancerization should be driven by consideration of relevant patient, disease, and treatment factors, and appropriate treatment decisions will differ from patient to patient. Prevention measures and screening recommendations are discussed, and special considerations related to management of immunocompromised patients are provided.

Fabrication and characterization of silicon position sensitive particle detectors

Position sensitive particle detectors are needed in high energy physics research. This thesis describes the development of fabrication processes and characterization techniques of silicon microstrip detectors used in the work for searching elementary particles in the European center for nuclear research, CERN. The detectors give an electrical signal along the particles trajectory after a collision in the particle accelerator. The trajectories give information about the nature of the particle in the struggle to reveal the structure of the matter and the universe. Detectors made of semiconductors have a better position resolution than conventional wire chamber detectors. Silicon semiconductor is overwhelmingly used as a detector material because of its cheapness and standard usage in integrated circuit industry. After a short spread sheet analysis of the basic building block of radiation detectors, the pn junction, the operation of a silicon radiation detector is discussed in general. The microstrip detector is then introduced and the detailed structure of a double-sided ac-coupled strip detector revealed. The fabrication aspects of strip detectors are discussedstarting from the process development and general principles ending up to the description of the double-sided ac-coupled strip detector process. Recombination and generation lifetime measurements in radiation detectors are discussed shortly. The results of electrical tests, ie. measuring the leakage currents and bias resistors, are displayed. The beam test setups and the results, the signal to noise ratio and the position accuracy, are then described. It was found out in earlier research that a heavy irradiation changes the properties of radiation detectors dramatically. A scanning electron microscope method was developed to measure the electric potential and field inside irradiated detectorsto see how a high radiation fluence changes them. The method and the most important results are discussed shortly.

Abrasion, transport and distribution of sediment in selected streams of Southern Ontario and Western New York /

The rate of decrease in mean sediment size and weight per square metre along a 54 km reach of the Credit River was found to depend on variations in the channel geometry. The distribution of a specific sediment size consist of: (1) a transport zone; (2) an accumulation zone; and (3) a depletion zone. These zones shift downstream in response to downcurrent decreases in stream competence. Along a .285 km man-made pond, within the Credit River study area, the sediment is also characterized by downstream shifting accumulation zones for each finer clast size. The discharge required to initiate movement of 8 cm and 6 cm blocks in Cazenovia Creek is closely approximated by Baker and Ritter's equation. Incipient motion of blocks in Twenty Mile Creek is best predicted by Yalin's relation which is more efficient in deeper flows. The transport distance of blocks in both streams depends on channel roughness and geometry. Natural abrasion and distribution of clasts may depend on the size of the surrounding sediment and variations in flow competence. The cumulative percent weight loss with distance of laboratory abraded dolostone is defined by a power function. The decrease in weight of dolostone follows a negative exponential. In the abrasion mill, chipping causes the high initial weight loss of dolostone; crushing and grinding produce most of the subsequent weight loss. Clast size was found to have little effect on the abrasion of dolostone within the diameter range considered. Increasing the speed of the mill increased the initial amount of weight loss but decreased the rate of abrasion. The abrasion mill was found to produce more weight loss than stream action. The maximum percent weight loss determined from laboratory and field abrasion data is approximately 40 percent of the weight loss observed along the Credit River. Selective sorting of sediment explains the remaining percentage, not accounted for by abrasion.