Comparative analysis between identified injuries of victims of fall from height and other mechanisms of closed trauma

OBJECTIVE:to identify predictors of death in blunt trauma patients sustaining pelvic fractures and, posteriorly, compare them to a previously reported series from the same center.METHOD: Retrospective analysis of trauma registry data, including blunt trauma patients older than 14 y.o. sustaining pelvic fractures admitted from 2008 to 2010. Patients were assigned into group 1 (dead) or 2 (survivors). We used Student's t, qui square and Fisher's tests for statistical analysis, considering p<0.05 as significant. Posteriorly, we compared predictors of death between both periods.RESULTS: Seventy-nine cases were included. Mean RTS, ISS and TRISS were, respectively, 6.44 + 2.22, 28.0 + 15.2 e 0.74 + 0.33. Nineteen patients died (24,0%). Main cause of death was hemorrhage (42,1%). Group 1 was characterized by (p<0.05) lower systolic blood pressure and Glasgow coma scale means on admission, higher heart rate, head AIS, extremity AIS and ISS means, as well as, higher frequency of severe head injuries and complex pelvic fractures. Comparing both periods, we notice that the anatomic and physiologic severity of injury increased (RTS and ISS means). Furthermore, there was a decrease in the impact of associated thoracic and abdominal injuries on the prognosis and an association of lethality with the presence of complex pelvic fractures.CONCLUSION: There were significant changes in the predictors of death between these two periods. The impact of thoracic and abdominal associated injures decreased while the importance of severe retroperitoneal hemorrhage increased. There was also an increase in trauma severity, which accounted for high lethality.

Analysis and validation of space averaged drag model for numerical simulations of gas-solid flows in fluidized beds

This thesis presents an approach for formulating and validating a space averaged drag model for coarse mesh simulations of gas-solid flows in fluidized beds using the two-fluid model. Proper modeling for fluid dynamics is central in understanding any industrial multiphase flow. The gas-solid flows in fluidized beds are heterogeneous and usually simulated with the Eulerian description of phases. Such a description requires the usage of fine meshes and small time steps for the proper prediction of its hydrodynamics. Such constraint on the mesh and time step size results in a large number of control volumes and long computational times which are unaffordable for simulations of large scale fluidized beds. If proper closure models are not included, coarse mesh simulations for fluidized beds do not give reasonable results. The coarse mesh simulation fails to resolve the mesoscale structures and results in uniform solids concentration profiles. For a circulating fluidized bed riser, such predicted profiles result in a higher drag force between the gas and solid phase and also overestimated solids mass flux at the outlet. Thus, there is a need to formulate the closure correlations which can accurately predict the hydrodynamics using coarse meshes. This thesis uses the space averaging modeling approach in the formulation of closure models for coarse mesh simulations of the gas-solid flow in fluidized beds using Geldart group B particles. In the analysis of formulating the closure correlation for space averaged drag model, the main parameters for the modeling were found to be the averaging size, solid volume fraction, and distance from the wall. The closure model for the gas-solid drag force was formulated and validated for coarse mesh simulations of the riser, which showed the verification of this modeling approach. Coarse mesh simulations using the corrected drag model resulted in lowered values of solids mass flux. Such an approach is a promising tool in the formulation of appropriate closure models which can be used in coarse mesh simulations of large scale fluidized beds.

Reflexive Space. A Constructionist Model of the Russian Reflexive Marker

This study examines the structure of the Russian Reflexive Marker ( ся/-сь) and offers a usage-based model building on Construction Grammar and a probabilistic view of linguistic structure. Traditionally, reflexive verbs are accounted for relative to non-reflexive verbs. These accounts assume that linguistic structures emerge as pairs. Furthermore, these accounts assume directionality where the semantics and structure of a reflexive verb can be derived from the non-reflexive verb. However, this directionality does not necessarily hold diachronically. Additionally, the semantics and the patterns associated with a particular reflexive verb are not always shared with the non-reflexive verb. Thus, a model is proposed that can accommodate the traditional pairs as well as for the possible deviations without postulating different systems. A random sample of 2000 instances marked with the Reflexive Marker was extracted from the Russian National Corpus and the sample used in this study contains 819 unique reflexive verbs. This study moves away from the traditional pair account and introduces the concept of Neighbor Verb. A neighbor verb exists for a reflexive verb if they share the same phonological form excluding the Reflexive Marker. It is claimed here that the Reflexive Marker constitutes a system in Russian and the relation between the reflexive and neighbor verbs constitutes a cross-paradigmatic relation. Furthermore, the relation between the reflexive and the neighbor verb is argued to be of symbolic connectivity rather than directionality. Effectively, the relation holding between particular instantiations can vary. The theoretical basis of the present study builds on this assumption. Several new variables are examined in order to systematically model variability of this symbolic connectivity, specifically the degree and strength of connectivity between items. In usage-based models, the lexicon does not constitute an unstructured list of items. Instead, items are assumed to be interconnected in a network. This interconnectedness is defined as Neighborhood in this study. Additionally, each verb carves its own niche within the Neighborhood and this interconnectedness is modeled through rhyme verbs constituting the degree of connectivity of a particular verb in the lexicon. The second component of the degree of connectivity concerns the status of a particular verb relative to its rhyme verbs. The connectivity within the neighborhood of a particular verb varies and this variability is quantified by using the Levenshtein distance. The second property of the lexical network is the strength of connectivity between items. Frequency of use has been one of the primary variables in functional linguistics used to probe this. In addition, a new variable called Constructional Entropy is introduced in this study building on information theory. It is a quantification of the amount of information carried by a particular reflexive verb in one or more argument constructions. The results of the lexical connectivity indicate that the reflexive verbs have statistically greater neighborhood distances than the neighbor verbs. This distributional property can be used to motivate the traditional observation that the reflexive verbs tend to have idiosyncratic properties. A set of argument constructions, generalizations over usage patterns, are proposed for the reflexive verbs in this study. In addition to the variables associated with the lexical connectivity, a number of variables proposed in the literature are explored and used as predictors in the model. The second part of this study introduces the use of a machine learning algorithm called Random Forests. The performance of the model indicates that it is capable, up to a degree, of disambiguating the proposed argument construction types of the Russian Reflexive Marker. Additionally, a global ranking of the predictors used in the model is offered. Finally, most construction grammars assume that argument construction form a network structure. A new method is proposed that establishes generalization over the argument constructions referred to as Linking Construction. In sum, this study explores the structural properties of the Russian Reflexive Marker and a new model is set forth that can accommodate both the traditional pairs and potential deviations from it in a principled manner.

Plan B from Outer Space - InsomniaGame-pelin suunnittelu ja toteutus 2010–2011

InsomniaGame oli Turun yliopiston digitaalisen kulttuurin oppiaineen ja Insomnia verkkopeliyhdistyksen yhteistyössä vuosina 2010 ja 2011 toteuttama pelikonseptikokeilu. InsomniaGame oli osa laajempaa ”CoEx: Yhteisöllistä tekemistä tukevat tilat kokemusten jakamisessa” kaksivuotista (1.10.2009–31.12.2011) hanketta, jonka toteuttivat yhteistyössä Turun yliopiston Porin yksikkö, Tampereen teknillisen yliopiston Porin yksikkö ja Tampereen yliopisto. Hankkeen tavoitteena oli toteuttaa sosiaalista mediaa, yhteisöllisyyttä ja lisättyä todellisuutta hyödyntäviä virtuaalisia ja julkisia tiloja, joissa käyttäjät voivat jakaa kokemuksia. Tutkimus on luonteeltaan soveltava pro gradu -tutkielma, joka sisältää kaksi vuotta kestäneen ja kaksi pelisovellusta sisältävän työosuuden. InsomniaGame koostui erilaisista pelaajien suorittamista tehtävistä, pelialustasta sekä taustatarinasta. Päätutkimuskysymykset ovat: Mitkä tekijät vaikuttivat pelisuunnitteluprosessiin ja miten? Työ esittelee InsomniaGame-pelin kehityksen. Erityistarkastelussa ovat suunnitteluprosessin ja pelin sisällölliset muutokset sekä niihin vaikuttaneet tekijät. Pelin kehitys perustui pääasiassa erilaisiin dokumentteihin, joita käytettiin suunnittelun apuvälineenä sekä viestinnässä projektin eri toimijoiden kesken. Tutkimus pyrkii syntyneiden dokumenttien sekä pelisuunnittelijoiden muistin perusteella rekonstruoimaan InsomniaGame-pelisovelluksen kehityskaaren. InsomniaGamen kehityksessä oli monia tekijöitä, jotka muuttuivat sen kehityskaaren aikana. Itse pelin sisältö, kuten myös suunnittelutapa, muuttuivat kahden vuoden aikana huomattavasti. Pelillä oli myös monia erityispiirteitä, jotka tekevät sen kehityksestä ainutlaatuisen, sillä esimerkiksi pelin testaaminen yhtenä kokonaisuutena oli mahdotonta. Lisäksi peli oli tutkimus- ja yhteistyöprojekti, jossa oli mukana monia eri toimijoita ja erityisesti tutkimuksessa korostuu yhteistyökumppani Insomnia verkkopeliyhdistyksen osallisuus. InsomniaGamen kummankaan vuoden toteutus ei sujunut odotetulla tavalla, mikä osaltaan vaikutti etenkin jälkimmäisen vuoden pelin suunnitteluun. Varsinainen suunnittelutyö kuitenkin eteni ensimmäisenä vuonna käytetyn mallin mukaisesti, mutta kuitenkin niin että alkuperäiset oletukset pelisuunnittelusta ja lopputuloksesta muuttuivat. Tämän vuoksi peliprojektia voi paikoitellen luonnehtia jopa kaoottiseksi, ja erityisesti toteutusvaiheessa jouduttiin luomaan nopealla aikataululla uusia toimintamalleja. Työ toimii mallina tuleville peliprojekteille, mutta erityisen tärkeää olisi luoda yhtenäinen kehitysalusta vastaavanlaisia projekteja varten.

Numerical and experimental investigation of thermal louvers for space applications

Thermal louvers, using movable or rotating shutters over a radiating surface, have gained a wide acceptance as highly efficient devices for controlling the temperature of a spacecraft. This paper presents a detailed analysis of the performance of a rectangular thermal louver with movable blades. The radiative capacity of the louver, determined by its effective emittance, is calculated for different values of the blades opening angle. Experimental results obtained with a prototype of a spacecraft thermal louver show good agreement with the theoretical values.

Design Space Exploration for MPSoC Architectures

Multiprocessor system-on-chip (MPSoC) designs utilize the available technology and communication architectures to meet the requirements of the upcoming applications. In MPSoC, the communication platform is both the key enabler, as well as the key differentiator for realizing efficient MPSoCs. It provides product differentiation to meet a diverse, multi-dimensional set of design constraints, including performance, power, energy, reconfigurability, scalability, cost, reliability and time-to-market. The communication resources of a single interconnection platform cannot be fully utilized by all kind of applications, such as the availability of higher communication bandwidth for computation but not data intensive applications is often unfeasible in the practical implementation. This thesis aims to perform the architecture-level design space exploration towards efficient and scalable resource utilization for MPSoC communication architecture. In order to meet the performance requirements within the design constraints, careful selection of MPSoC communication platform, resource aware partitioning and mapping of the application play important role. To enhance the utilization of communication resources, variety of techniques such as resource sharing, multicast to avoid re-transmission of identical data, and adaptive routing can be used. For implementation, these techniques should be customized according to the platform architecture. To address the resource utilization of MPSoC communication platforms, variety of architectures with different design parameters and performance levels, namely Segmented bus (SegBus), Network-on-Chip (NoC) and Three-Dimensional NoC (3D-NoC), are selected. Average packet latency and power consumption are the evaluation parameters for the proposed techniques. In conventional computing architectures, fault on a component makes the connected fault-free components inoperative. Resource sharing approach can utilize the fault-free components to retain the system performance by reducing the impact of faults. Design space exploration also guides to narrow down the selection of MPSoC architecture, which can meet the performance requirements with design constraints.

The European Union and Assembling Biofuel Development – topological investigations concerning the associations between law, policy and space

Biofuels for transport are a renewable source of energy that were once heralded as a solution to multiple problems associated with poor urban air quality, the overproduction of agricultural commodities, the energy security of the European Union (EU) and climate change. It was only after the Union had implemented an incentivizing framework of legal and political instruments for the production, trade and consumption of biofuels that the problems of weakening food security, environmental degradation and increasing greenhouse gases through land-use changes began to unfold. In other words, the difference between political aims for why biofuels are promoted and their consequences has grown – which is also recognized by the EU policy-makers. Therefore, the global networks of producing, trading and consuming biofuels may face a complete restructure if the European Commission accomplishes its pursuit to sideline crop-based biofuels after 2020. My aim with this dissertation is not only to trace the manifold evolutions of the instruments used by the Union to govern biofuels but also to reveal how this evolution has influenced the dynamics of biofuel development. Therefore, I study the ways the EU’s legal and political instruments of steering biofuels are coconstitutive with the globalized spaces of biofuel development. My analytical strategy can be outlined through three concepts. I use the term ‘assemblage’ to approach the operations of the loose entity of actors and non-human elements that are the constituents of multi-scalar and -sectorial biofuel development. ‘Topology’ refers to the spatiality of this European biofuel assemblage and its parts whose evolving relations are treated as the active constituents of space, instead of simply being located in space. I apply the concept of ‘nomosphere’ to characterize the framework of policies, laws and other instruments that the EU applies and construes while attempting to govern biofuels. Even though both the materials and methods vary in the independent articles, these three concepts characterize my analytical strategy that allows me to study law, policy and space associated with each other. The results of my examinations underscore the importance of the instruments of governance of the EU constituting and stabilizing the spaces of producing and, on the other hand, how topological ruptures in biofuel development have enforced the need to reform policies. This analysis maps the vast scope of actors that are influenced by the mechanism of EU biofuel governance and, what is more, shows how they are actively engaging in the Union’s institutional policy formulation. By examining the consequences of fast biofuel development that are spatially dislocated from the established spaces of producing, trading and consuming biofuels such as indirect land use changes, I unfold the processes not tackled by the instruments of the EU. Indeed, it is these spatially dislocated processes that have pushed the Commission construing a new type of governing biofuels: transferring the instruments of climate change mitigation to land-use policies. Although efficient in mitigating these dislocated consequences, these instruments have also created peculiar ontological scaffolding for governing biofuels. According to this mode of governance, the spatiality of biofuel development appears to be already determined and the agency that could dampen the negative consequences originating from land-use practices is treated as irrelevant.

Amino acid composition of parturient plasma, the intervillous space of the placenta and the umbilical vein of term newborn infants

The objective of the present study was to determine the levels of amino acids in maternal plasma, placental intervillous space and fetal umbilical vein in order to identify the similarities and differences in amino acid levels in these compartments of 15 term newborns from normal pregnancies and deliveries. All amino acids, except tryptophan, were present in at least 186% higher concentrations in the intervillous space than in maternal venous blood, with the difference being statistically significant. This result contradicted the initial hypothesis of the study that the plasma amino acid levels in the placental intervillous space should be similar to those of maternal plasma. When the maternal venous compartment was compared with the umbilical vein, we observed values 103% higher on the fetal side which is compatible with currently accepted mechanisms of active amino acid transport. Amino acid levels of the placental intervillous space were similar to the values of the umbilical vein except for proline, glycine and aspartic acid, whose levels were significantly higher than fetal umbilical vein levels (average 107% higher). The elevated levels of the intervillous space are compatible with syncytiotrophoblast activity, which maintain high concentrations of free amino acids inside syncytiotrophoblast cells, permitting asymmetric efflux or active transport from the trophoblast cells to the blood in the intervillous space. The plasma amino acid levels in the umbilical vein of term newborns probably may be used as a standard of local normality for clinical studies of amino acid profiles.

Plasma amino acids in pregnancy, placental intervillous space and preterm newborn infants

Plasma amino acid levels have never been studied in the placental intervillous space of preterm gestations. Our objective was to determine the possible relationship between plasma amino acids of maternal venous blood (M), of the placental intervillous space (PIVS) and of the umbilical vein (UV) of preterm newborn infants. Plasma amino acid levels were analyzed by ion-exchange chromatography in M from 14 parturients and in the PIVS and UV of their preterm newborn infants. Mean gestational age was 34 ± 2 weeks, weight = 1827 ± 510 g, and all newborns were considered adequate for gestational age. The mean Apgar score was 8 and 9 at the first and fifth minutes. Plasma amino acid values were significantly lower in M than in PIVS (166%), except for aminobutyric acid. On average, plasma amino acid levels were significantly higher in UV than in M (107%) and were closer to PIVS than to M values, except for cystine and aminobutyric acid (P < 0.05). Comparison of the mean plasma amino acid concentrations in the UV of preterm to those of term newborn infants previously studied by our group showed no significant difference, except for proline (P < 0.05), preterm > term. These data suggest that the mechanisms of active amino acid transport are centralized in the syncytiotrophoblast, with their passage to the fetus being an active bidirectional process with asymmetric efflux. PIVS could be a reserve amino acid space for the protection of the fetal compartment from inadequate maternal amino acid variations.

Alloxan-induced diabetes delays repair in a rat model of closed tibial fracture

A closed fracture was performed on the left tibia of 3-month-old Wistar rats weighing 250 to 350 g that were either healthy (N = 24) or made diabetic with alloxan (N = 24) to investigate the effect of alloxan-induced diabetes on the course of bone fracture healing. Histomorphometric analysis of the fracture site was performed at 7, 14, 25, and 35 days. After 7 days, diabetic rats had significantly less cartilage (P = 0.045) and greater fibrous connective (P = 0.006) tissue formation at the fracture site compared to controls. In contrast, marked callus formation was seen in diabetic rats with significant osteogenesis (P = 0.011, P = 0.010, P = 0.010, respectively, for 14, 25, and 35 days) and chondrogenesis (P = 0.028, P = 0.033, P = 0.019) compared to controls. Radiographic analysis revealed a displaced fracture with poor bone fragment alignment and delayed consolidation at these times in the diabetic group. The levels of alkaline phosphatase were significantly higher in diabetic rats at 25 days (P = 0.009). These results suggest that the initial excessive formation of fibrous connective tissue associated with delay in chondrogenesis and osteogenesis may not provide suitable stability of the fractured site, contributing to the inappropriate alignment of fragments and an increase in the volume of callus in later stages of repair. The resulting displaced fracture in diabetic rats requires long periods for remodeling and complete bone consolidation.

Novel retrograde puncture method to establish preperitoneal space for laparoscopic direct inguinal hernia repair with internal ring suturing

The aim of this study was to explore the clinical efficacy of a novel retrograde puncture approach to establish a preperitoneal space for laparoscopic direct inguinal hernia repair with inguinal ring suturing. Forty-two patients who underwent laparoscopic inguinal hernia repair with retrograde puncture for preperitoneal space establishment as well as inguinal ring suturing between August 2013 and March 2014 at our hospital were enrolled. Preperitoneal space was successfully established in all patients, with a mean establishment time of 6 min. Laparoscopic repairs were successful in all patients, with a mean surgical time of 26±15.1 min. Mean postoperative hospitalization duration was 3.0±0.7 days. Two patients suffered from postoperative local hematomas, which were relieved after puncturing and drainage. Four patients had short-term local pain. There were no cases of chronic pain. Patients were followed up for 6 months to 1 year, and no recurrence was observed. Our results demonstrate that preperitoneal space established by the retrograde puncture technique can be successfully used in adult laparoscopic hernioplasty to avoid intraoperative mesh fixation, and thus reduce medical costs.

Guidelines for small embedded system companies aiming to enter the space industry

This guide summarizes useful information about the European Space Agency (ESA), the European space industry, the ECSS standards and product assurance for small and medium enterprises that are aiming to enter the industry. Additionally, the applicability of agile development in space projects is discussed.

Head Space Solid Phase Micro-Extraction (HS - SPME) of volatile organic compounds produced by Sporidiobolus salmonicolor (CBS 2636)

The aim of the present study was the assessment of volatile organic compounds produced by Sporidiobolus salmonicolor (CBS 2636) using methyl and ethyl ricinoleate, ricinoleic acid and castor oil as precursors. The analysis of the volatile organic compounds was carried out using Head Space Solid Phase Micro-Extraction (HS - SPME). Factorial experimental design was used for investigating extraction conditions, verifying stirring rate (0-400 rpm), temperature (25-60 ºC), extraction time (10-30 minutes), and sample volume (2-3 mL). The identification of volatile organic compounds was carried out by Gas Chromatography with Mass Spectrum Detector (GC/MSD). The conditions that resulted in maximum extraction were: 60 ºC, 10 minutes extraction, no stirring, sample volume of 2.0 mL, and addition of saturated KCl (1:10 v/v). In the bio-production of volatile organic compounds the effect of stirring rate (120-200 rpm), temperature (23-33 ºC), pH (4.0-8.0), precursor concentration (0.02-0.1%), mannitol (0-6%), and asparagine concentration (0-0.2%) was investigated. The bio-production at 28 ºC, 160 rpm, pH 6,0 and with the addition of 0.02% ricinoleic acid to the medium yielded the highest production of VOCs, identified as 1,4-butanediol, 1,2,2-trimethylciclopropilamine, beta-ionone; 2,3-butanodione, pentanal, tetradecane, 2-isononenal, 4-octen-3-one, propanoic acid, and octadecane.

Product Assurance in Agile Space Systems Development

Product assurance is an essential part of product development process if developers want to ensure that final product is safe and reliable. Product assurance can be supported withrisk management and with different failure analysis methods. Product assurance is emphasized in system development process of mission critical systems. The product assurance process in systems of this kind requires extra attention. Inthis thesis, mission critical systems are space systems and the product assurance processof these systems is presented with help of space standards. The product assurance process can be supported with agile development because agile emphasizes transparency of the process and fast response to changes. Even if the development process of space systems is highly standardized and reminds waterfall model, it is still possible to adapt agile development in space systems development. This thesisaims to support the product assurance process of space systems with agile developmentso that the final product would be as safe and reliable as possible. The main purpose of this thesis is to examine how well product assurance is performed in Finnish space organizations and how product assurance tasks and activities can besupported with agile development. The research part of this thesis is performed in survey form.