Efeito da área de secção do enxerto na cirurgia de reconstrução do ligamento cruzado anterior - estudo histológico em cães

OBJETIVO: Relacionar a área de secção inicial do enxerto com o resultado da cirurgia de reconstrução do LCA. Foram operados oito cães, divididos em dois grupos, de acordo com o tamanho do enxerto: grupo A - 25% e grupo B - 40% da largura do ligamento patelar (LP). MÉTODOS: Após oito meses, os cães foram sacrificados para análise macroscópica e histológica dos ligamentos reconstruídos, utilizando-se o joelho contralateral do cão como controle. RESULTADOS: em ambos os grupos, todos os ligamentos reconstruídos apresentaram-se viáveis e hipertrofiados; o enxerto de LP teve sua morfologia alterada, verificada através da medida do crimp e da celularidade, assemelhando-se com a do LCA. CONCLUSÃO: A área de secção do enxerto não influenciou o resultado histológico da cirurgia de reconstrução do LCA em cães.

Assessment of bovine biomaterials containing bone morphogenetic proteins bound to absorbable hydroxyapatite in rabbit segmental bone defects

OBJETIVO: Avaliar a capacidade osteo-regenerativa de dois biomateriais utilizando um modelo de defeito segmentar efetuado nas diáfises do rádio de coelhos. MÉTODOS: O defeito direito foi preenchido com pool de proteínas morfogenéticas ósseas (pBMPs) e hidroxiapatita em pó ultrafina absorvível (HA) combinada com matriz óssea inorgânica desmineralizada e colágeno, derivados do osso bovino (Grupo A). O defeito esquerdo foi preenchido com matriz óssea desmineralizada bovina com pBMPs e hidroxiapatita em pó ultrafina absorvível (Grupo B). em ambos os defeitos utilizou-se membrana reabsorvível de cortical bovina desmineralizada para reter os biomateriais no defeito ósseo e guiar a regeneração tecidual. Os coelhos foram submetidos à eutanásia aos 30, 90 e 150 dias após a cirurgia. Foram efetuados exames radiográficos, tomográficos e histológicos em todos os espécimes. RESULTADOS: Aos 30 dias de pós-cirúrgico, o osso cortical desmineralizado foi totalmente reabsorvido em ambos os grupos. A HA tinha reabsorvido nos defeitos do Grupo A, mas persistiu nos do Grupo B. Uma reação de corpo estranho foi evidente com ambos os produtos, porém mais pronunciada no Grupo B. Aos 90 dias os defeitos do grupo B tinham mais formação óssea que os do Grupo A. Entretanto, aos 150 dias após a cirurgia, nenhum tratamento havia promovido o completo reparo do defeito. CONCLUSÃO: Os biomateriais testados contribuíram pouco ou quase nada para a reconstituição do defeito segmentar.

Filling of extraction sockets with autogenous bone in cats

OBJETIVO: Avaliar a regeneração óssea de alvéolos dentais de gatos após enxertia. MÉTODOS: Dezoito gatos adultos, distribuídos em três grupos de 6 animais cada, foram submetidos a extração do canino mandibular direito ou esquerdo. No grupo 1, controle, o alvéolo foi deixado vazio. No grupo 2, o alvéolo foi preenchido com osso esponjoso autógeno do osso ilíaco e no grupo 3, com raspa de osso cortical do osso ilíaco. Os animais foram submetidos à eutanásia 6 semanas após a cirurgia. RESULTADOS: Nas radiografias realizadas no pós-operatório imediato na projeção ventrodorsal observou-se uma área de radiolucência correspondente ao local da alveolectomia e extração dentária. Diminuição da radiolucência foi verificada nas radiografias realizadas seis semanas após a cirurgia. Nos cortes histológicos verificou-se a presença de trabéculas ósseas. A porcentagem de tecido ósseo esponjoso presente nos alvéolos dentais foi quantificada por exames histométricos. Não houve diferença estatisticamente significante entre os grupos (Teste de Kruskal-Wallis p > 0.05) (grupo 1: 52,54 ± 15,4; grupo 2: 50,51 ± 5,01; grupo 3: 51,85 ± 9,52). CONCLUSÃO: Os alvéolos dentais de gatos preenchidos com osso esponjoso autógeno ou raspa de osso cortical autógeno apresentaram regeneração óssea similar àquela observada no grupo controle, após um período de observação de seis semanas.

Produção antecipada de mudas de videira Rubi (Vitis vinifera) através de enxertia verde

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

2,6-Di-hidroxiacetofenona e tipo de corte basal no enraizamento de estacas semi-lenhosas de pessegueiro Okinawa

A propagação do pessegueiro (Prunus persica) no Brasil é baseada na enxertia sobre porta-enxertos oriundos de sementes. Outros métodos de propagação de frutíferas poderiam ser utilizados para o pessegueiro visando obtenção de materiais de melhor qualidade. Neste trabalho objetivou-se avaliar o efeito do 2,6-di-hidroxiacetofenona aplicado previamente ao ácido indol-butírico em estacas semi-lenhosas de pessegueiro da cultivar Okinawa preparadas com diferentes tipos de corte basal. Foram coletados ramos do porta-enxerto Okinawa em dezembro de 2001 para o preparo das estacas sem folhas, com 12cm de comprimento, 7mm de diâmetro, quatro gemas e diferentes tipos de cortes basais (corte longitudinal, corte lateral e corte da casca) tratado-as na base com 0 e 300mg L-1 de 2,6-di-hidroxiacetofenona por 4h em aeração (oxigenação) e depois com 2500mg L-1 ácido indol-butírico por 5s. As estacas foram plantadas em bandejas de poliestireno expandido (72 células) com vermiculita fina e colocadas em casa de nebulização por 45 dias. A aplicação de 300mg L-1 de 2,6-DHAP e a realização de lesões nas bases das estacas foram eficientes para aumentar o enraizamento das estacas semi-lenhosas do pessegueiro Okinawa , demonstrando que estas técnicas podem ser utilizadas para a propagação de pessegueiro por estaquia.

Avaliação de porta-enxertos para pepino tipo japonês

A enxertia de pepino híbrido do tipo japonês em aboboreira tem por objetivo principal o manejo de doenças causadas por fungos de solo, consequentemente obter maior produtividade, além de frutos menos cerosos. Neste trabalho estudou-se o comportamento da cultivar Rensei, avaliando-se o desenvolvimento vegetativo das mudas, a produtividade e as características dos frutos das plantas enxertadas em diferentes porta-enxertos, em comparação com as não enxertadas. O trabalho foi realizado sob estufa do tipo túnel alto, com as plantas conduzidas em recipientes plásticos, de julho/96 a julho/97, em Piracicaba - SP. Os tratamentos foram os seguintes: T1 testemunha (planta não-enxertada); T2 enxertia em abóbora Menina Brasileira; T3 enxertia em abóbora híbrida Ikki; T4: enxertia em abóbora-de-moita Novita; T5 enxertia em abóbora híbrida Tetsukabuto; T6 enxertia em abóbora híbrida Kirameki. A porcentagem de pegamento da enxertia só não apresentou valores superiores a 83,3% quando se utilizou abóbora Menina Brasileira. Foram obtidos frutos mais brilhantes e com pouca cerosidade, de interesse comercial, na enxertia em Ikki e Kirameki. Nestes porta-enxertos, seguidos por Tetsukabuto, houve maior produção em peso e número de frutos por planta.

The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation

The mechanical and thermo-oxidative degradation of high density polyethylene (HDPE) was measured in a twin-screw extruder using various processing conditions. Two types of HDPE, Phillips and Ziegler-Natta, having different levels of terminal vinyl unsaturation were analysed. Mild screw profiles, having mainly conveying elements, have short mean residence times then profiles with kneading discs and left hand elements. Carbonyl and traps-vinylene group concentrations increased, whereas vinyl group concentration decreased with number of extrusions. Higher temperature profiles intensified these effects. The thermo-mechanical degradation mechanism begins with chain scission in the longer chains due to their higher probability of entanglements. These macroradicals then react with the vinyl terminal unsaturations of other chains producing chain branching. Shorter chains are more mobile, not suffering scission but instead are used for grafting the macroradicals, increasing the molecular weight. Increase in the levels of extrusion temperature, shear and vinyl end groups content facilitates the thermo-mechanical degradation reducing the amount of both, longer chains via chain scission and shorter chains via chain branching, narrowing the polydispersity. Phillips HDPE produces a higher level of chain branching than does the Ziegler-Natta type. (C) 2004 Elsevier Ltd. All rights reserved.

Nanocrystalline anatase thin films prepared from redispersible sol-gel powders

Transparent thin films of nanocrystalline anatase were obtained by dip-coating process using an ethanolic suspension of redispersed nanoparticles. This suspension was prepared by sol-gel route and their redispersability achieved by surface grafting of para-toluene-sulfonic acid and acetylacetone. The effects of the acetylacetone content on the powder redispersibility and on the structural evolution of films were determined by small angle X-ray scattering, X-ray reflectometry and X-ray diffraction for different firing temperatures. The results demonstrated that the porous structure of the studied films consist of agglomerates of primary particles with two levels of porosity. The control of the amount of capping ligand allows for a fine-tuning of the average pore size of the dried films. Upon increasing the firing temperature up to 500 degrees C, progressive increase in apparent density, average pore size of films and average crystallite size of powders were observed. (c) 2005 Elsevier Ltd. All rights reserved.

Synthesis of hybrid silicates containing porphyrins incorporated by a sol-gel process and their properties

Porphyrin was incorporated in a silicate network, via a covalent bond, by grafting a functional group with 3-aminopropyltriethoxysilane, using a sol-gel process. We have carried out the synthesis and measured the absorption spectra, nuclear magnetic resonance spectra, infrared (IR) spectra, luminescence spectra and lifetime of these hybrid silicates, porphyrinosilicas. These samples contained the following free-base porphyrins: meso-tetrakis-p-chlorobenzoylporphyrin, meso-tetrakis-2,6-dichloro-3-chlorosulfonylphenylporphyrin. The obtained porphyrinosilicas have similar absorption and luminescence spectra to the free base porphyrins in solution. IR spectra confirm the formation of monomeric species. Lifetime measurement for porphyrinosilica reveals that 32% +/- 2% of porphyrin is covalently bonded to the silica network. (C) 1999 Elsevier B.V. B.V. All rights reserved.

Small angle X-ray scattering study of surface modified tin oxide nanoparticles prepared by sol-gel route

The surface properties of SnO2 nanoparticles were modified by grafting ionic (Tiron (R). (OH)(2)C6H2(SO3Na)(2)(H2O)-H-.) or non-ionic (Catechol (R). C6H4-1,2-(OH)(2)) capping Molecules during aqueous sol-gel processing to improve the redispersibility of powdered xerogel. The effect of the amount of grafted organic molecules on the redispersibility of powders in aqueous solution at several basic pH values was Studied. The nanostructural features of the colloidal suspensions were analyzed by small angle X-ray scattering (SAXS) measurements. Irrespective of the nature and amount of grafted molecules, complete redispersion was obtained in aqueous solution at pH = 13. The redispersion at pH = 11 results in a mixture of dispersed primary particles and aggregates. The proportion of well dispersed nanoparticles and aggregates (and their average size) can be tuned by the quantity of grafted ionic molecules.

Sintering and crystallite growth of nanocrystalline copper doped tin oxide

The effect of Cu2+ contents and of firing temperature on sintering and crystallite growth of nanocrystalline SnO2 xerogels was analyzed by thermoanalysis (mass loss (TG), linear shrinkage, and differential thermal analysis (DTA)), X-ray powder diffraction (XRPD), and EXAFS (extended X-ray absorption fine structures) measurements. Samples were prepared by two methods: (a) coprecipitation of a colloidal suspension from aqueous solution containing both Sn(IV) and Cu(II) ions and (b) grafting copper(II) species on the surface of tin pride gel. The thermoanalysis has shown that the shrinkage associated with the mass loss decreases by increasing the amount of copper. The EXAFS measurements carried out at the Cu K edge have evidenced the presence of copper in substitutional solid solution for the dried xerogel prepared with 0.7 mol % of copper, while for higher concentration of doping, copper has been observed also at the external surface of crystallites. The solid solution is metastable and copper migrates toward the surface during firing. The XRPD and DTA results have shown a recrystallization process near 320 degrees C, which leads to crystallite growth. The presence of copper segregated near the crystallite surface controls its growth.

An investigation of cadmium(II) and nickel(II) adsorption by chitin graft covolymer

Chitin hydrogels of poly(vinylpyrrolidone) (VP) were prepared by means of the hydrogen peroxide graft copolymerization process. The effect of the VP grafted chain on water diffusion through the biopolymer was studied. Fourier transform infrared spectra of the VP-g-Ch showed an increase in the intensities of the hydroxyl and carbonyl stretching bands indicating a reduction in the hydrogen bonding of chitin. An investigation was undertaken regarding the adsorption of nickel(II) and cadmium(II) ions from aqueous solutions by the VP grafted chitin and the effects of the grafting degree on the Cd2+ and Ni2+ sorption were studied. The Cd2+ and Ni2+ adsorption equilibrium data correlate well with the Freundlich equation. The results indicate that the Ch-g-VP graft copolymer under investigation is a potentially powerful chelating material that can be employed for Ni2+ and Cd2+ ion removal from wastewater effluents. (C) 2004 Wiley Periodicals, Inc.

Evaluation of Philips and Ziegler-Natta high-density polyethylene degradation during processing in an internal mixer using the chain scission and branching distribution function analysis

The oxidative and thermo-mechanical degradation of HDPE was studied during processing in an internal mixer under two conditions: totally and partially filled chambers, which provides lower and higher concentrations of oxygen, respectively. Two types of HDPEs, Phillips and Ziegler-Natta, having different levels of terminal vinyl unsaturations were analyzed. Materials were processed at 160, 200, and 240 degrees C. Standard rheograrns using a partially filled chamber showed that the torque is much more unstable in comparison to a totally filled chamber which provides an environment depleted of oxygen. Carbonyl and transvinylene group concentrations increased, whereas vinyl group concentration decreased with temperature and oxygen availability. Average number of chain scission and branching (n(s)) was calculated from MWD curves and its plotting versus functional groups' concentration showed that chain scission or branching takes place depending upon oxygen content and vinyl groups' consumption. Chain scission and branching distribution function (CSBDF) values showed that longer chains undergo chain scission easier than shorter ones due to their higher probability of entanglements. This yields macroradicals that react with the vinyl terminal unsaturations of other chains producing chain branching. Shorter chains are more mobile, not suffering scission but instead are used for grafting the macroradicals, increasing the molecular weight. Increase in the oxygen concentration, temperature, and vinyl end groups' content facilitates the thermo-mechanical degradation reducing the amount of both, longer chains via chain scission and shorter chains via chain branching, narrowing the polydispersity. Phillips HDPE produces a higher level of chain branching than the Ziegler-Natta's type at the same processing condition. (c) 2006 Elsevier Ltd. All rights reserved.

PREPARATION AND CHARACTERIZATION OF TI(IV) OXIDE GRAFTED ONTO SILICA ON A SILICA-GEL SURFACE

Silica gel with a surface area of 500 m2g-1 and an average pore diameter of 60 angstrom was chemically modified with Ti(IV) oxide using the grafting method. The amount of metal oxide attached to the surface was 1.8.10(-3) mol g-1. The X-ray photoelectron spectra showed that the metal ion species on the surface are Ti(IV) in TiO2 and MTiO3 (M = Ca2+, Sr2+, Ba2+ and Pb2+), i.e. they have the binding energy of Ti2p3/2 = 458.7 eV. The dehydration of the solid at higher temperature increased the O(II)/Ti (O(II) = oxygen bound to titanium atom) ratio, presumably due to a reticulation of the hydrous Ti(IV) oxide on the silica surface at higher temperatures. Migration of Ti(IV) into the silica gel matrix was observed but the specific surface area was not significantly changed.

Bone regeneration at implants placed into extraction sockets of maxillary incisors in dogs

AimTo compare the influence of autologous or deproteinized bovine bone mineral as grafting material on healing of buccal dehiscence defects at implants installed immediately into the maxillary second incisor extraction socket in dogs.Material and methodsIn the maxillary second incisor sockets of 12 Labrador dogs, implants were installed immediately following tooth extraction. A standardized buccal defect was created and autologous bone particles or deproteinized bovine bone mineral were used to fill the defects. A collagen membrane was placed to cover the graft material, and the flaps were sutured to fully submerge the experimental areas. Six animals were sacrificed after 2 months, and six after 4 months of healing. Ground sections were obtained for histological evaluation.ResultsAfter 2 months of healing, all implants were osseointegrated. All buccal dehiscence defects were completely filled after 2 months irrespective of the augmentation material (autologous bone or Bio-Oss (R)) applied. Bone-to-implant contact (BIC) on the denuded implant surfaces was within a normal range of 30-40%. However, the newly formed tissue at 2 months was partially resorbed (> 50% of the area measurements) after 4 months.ConclusionsApplying either autologous bone or deproteinized bovine bone mineral to dehiscences at implants installed immediately into extraction sockets resulted in high degree of regeneration of the defects with satisfactory BIC on the denuded implant surface.To cite this article:De Santis E, Botticelli D, Pantani F, Pereira FP, Beolchini M, Lang NP. Bone regeneration at implants placed into extraction sockets of maxillary incisors in dogs.Clin. Oral Impl. Res. 22, 2011; 430-437.