A simple but efficient voice activity detection algorithm through Hilbert transform and dynamic threshold for speech pathologies

A simple but efficient voice activity detector based on the Hilbert transform and a dynamic threshold is presented to be used on the pre-processing of audio signals -- The algorithm to define the dynamic threshold is a modification of a convex combination found in literature -- This scheme allows the detection of prosodic and silence segments on a speech in presence of non-ideal conditions like a spectral overlapped noise -- The present work shows preliminary results over a database built with some political speech -- The tests were performed adding artificial noise to natural noises over the audio signals, and some algorithms are compared -- Results will be extrapolated to the field of adaptive filtering on monophonic signals and the analysis of speech pathologies on futures works

Parameter Identification in a Tuberculosis Model for Cameroon

A deterministic model of tuberculosis in Cameroon is designed and analyzed with respect to its transmission dynamics. The model includes lack of access to treatment and weak diagnosis capacity as well as both frequency-and density-dependent transmissions. It is shown that the model is mathematically well-posed and epidemiologically reasonable. Solutions are non-negative and bounded whenever the initial values are non-negative. A sensitivity analysis of model parameters is performed and the most sensitive ones are identified by means of a state-of-the-art Gauss-Newton method. In particular, parameters representing the proportion of individuals having access to medical facilities are seen to have a large impact on the dynamics of the disease. The model predicts that a gradual increase of these parameters could significantly reduce the disease burden on the population within the next 15 years.

Mesure des sensibilités au taux intérêt des activités des caisses d'épargne et de crédit : une application

La méthodologie proposée vise à estimer les sensibilités des revenus de trois caisses d'épargne et de crédit par rapport aux modifications de taux d'intérêt. Plusieurs études basées sur le MEDAF permettent d'analyser la relation rendement risque. Notre méthodologie se démarque par l'inclusion d'un facteur taux d'intérêt comme variable explicative et par la segmentation des activités à l'intérieur d'une même caisse d'épargne et de crédit. Notre démarche se détaille comme suit: présentation du cadre conceptuel, laquelle comporte une brève revue de la littérature théorique et empirique et résume l'évolution du sujet; description de la procédure utilisée, de l'échantillon et de l'estimation; l'analyse et l'interprétation des résultats obtenus pour trois caisses. Un cahier des procédures expliquant le programme développé pour l'analyse (sur GAUSS) est présenté en annexe.

Geometría diferencial de superficies

Este texto abarca temas como: superficies diferenciales, diferenciación e integración en superficies, formas fundamentales, Curvatura Gaussiana, teorema Egregio y teorema de Gauss-Bonnet. La colección de textos lecciones de matemáticas, iniciativa del departamento de Ciencias Básicas de la Universidad de Medellín (Medellín, Colombia) y su grupo de investigación SUMMA, incluye en cada número la exposición detallada de un tema matemático en particular, tratado con el rigor que muchas veces no es posible lograr en un curso regular de la disciplina. Las matemáticas incluyen diferentes áreas del saber matemático como: álgebra, trigonometría, cálculo, estadística y probabilidades, álgebra lineal, métodos lineales y numéricos, historia de las matemáticas, geometría, matemáticas puras y aplicadas, ecuaciones diferenciales y empelo de softwares matemáticos. Todas las carátulas de la colección vienen ilustradas, a manera de identificación, con diseños de la geometría fractal cuya fuente u origen se encuentra referenciada en las páginas interiores de los textos.

Elementos de geometría

Este texto Elementos de Geometría comprende: Geometría Euclidiana y Geometría del Compás. La Geometría Euclidiana se basa en el uso de la regla (no graduada) y el compás, para la construcción de las figuras geométricas. La Geometría Euclidiana se divide, a su vez, en geometría plana y geometría del espacio; la geometría plana trata de las figuras geométricas cuyos puntos están todos situados en el mismo plano y la geometría del espacio del estudio de figuras tridimensionales. El texto aborda, además, el teorema de Gauss que trata de la condición necesaria y suficiente para que una circunferencia se pueda dividir en partes iguales, mediante el uso de la regla y el compás, y teoremas notables como: teorema de Menelaus, teorema de Ceva, teorema de Stewart y teorema de a Alembert. En la geometría del espacio se incluyó un estudio de los cinco poliedros regulares: tetraedro, exaedro, octaedro, icosaedro y dodecaedro. El libro contiene ejercicios al finalizar cada capítulo, en el orden:\' teoremas, lugares geométricos, máximos y mínimos, y problemas varios, con el fin de desarrollar en el estudiante su espíritu investigativo y creativo. Este texto, es una iniciativa de los profesores del Departamento de Ciencias Básicas de la Universidad de Medellín (Medellín - Colombia) y su grupo de investigación SUMMA, yes un programa del Proyecto Institucional Permanencia con Calidad, cuyo objetivo fundamental es disminuir los niveles de deserción y pérdida académica de los estudiantes.

Triangular mesh parameterization with trimmed surfaces

Given a 2manifold triangular mesh \(M \subset {\mathbb {R}}^3\), with border, a parameterization of \(M\) is a FACE or trimmed surface \(F=\{S,L_0,\ldots, L_m\}\) -- \(F\) is a connected subset or region of a parametric surface \(S\), bounded by a set of LOOPs \(L_0,\ldots ,L_m\) such that each \(L_i \subset S\) is a closed 1manifold having no intersection with the other \(L_j\) LOOPs -- The parametric surface \(S\) is a statistical fit of the mesh \(M\) -- \(L_0\) is the outermost LOOP bounding \(F\) and \(L_i\) is the LOOP of the ith hole in \(F\) (if any) -- The problem of parameterizing triangular meshes is relevant for reverse engineering, tool path planning, feature detection, redesign, etc -- Stateofart mesh procedures parameterize a rectangular mesh \(M\) -- To improve such procedures, we report here the implementation of an algorithm which parameterizes meshes \(M\) presenting holes and concavities -- We synthesize a parametric surface \(S \subset {\mathbb {R}}^3\) which approximates a superset of the mesh \(M\) -- Then, we compute a set of LOOPs trimming \(S\), and therefore completing the FACE \(F=\ {S,L_0,\ldots ,L_m\}\) -- Our algorithm gives satisfactory results for \(M\) having low Gaussian curvature (i.e., \(M\) being quasi-developable or developable) -- This assumption is a reasonable one, since \(M\) is the product of manifold segmentation preprocessing -- Our algorithm computes: (1) a manifold learning mapping \(\phi : M \rightarrow U \subset {\mathbb {R}}^2\), (2) an inverse mapping \(S: W \subset {\mathbb {R}}^2 \rightarrow {\mathbb {R}}^3\), with \ (W\) being a rectangular grid containing and surpassing \(U\) -- To compute \(\phi\) we test IsoMap, Laplacian Eigenmaps and Hessian local linear embedding (best results with HLLE) -- For the back mapping (NURBS) \(S\) the crucial step is to find a control polyhedron \(P\), which is an extrapolation of \(M\) -- We calculate \(P\) by extrapolating radial basis functions that interpolate points inside \(\phi (M)\) -- We successfully test our implementation with several datasets presenting concavities, holes, and are extremely nondevelopable -- Ongoing work is being devoted to manifold segmentation which facilitates mesh parameterization

La predicción y la regla de los signos de descartes

René Descartes publicó en 1637 su famosa Géométrie, un tratado donde aplica el álgebra a la geometría y desarrolla un original sistema de álgebra simbólica. En el tercer libro de la Géométrie enuncia, sin demostración, su célebre regla de los signos de Descartes. Durante dos siglos, el mundo matemático intentó sin éxito una demostración general y satisfactoria a los estándares de la época. Finalmente, Carl Frederick Gauss la demostró de la manera más general en 1828 recurriendo a métodos algebraicos. En este artículo, presentamos el tratamiento que la regla de los signos tiene en los libros de texto de álgebra y proponemos una justificación original alternativa apoyada en la idea de predicción que, hasta donde sabemos, no ha sido reportada en la literatura especializada.

Radio Frequency Superconducting Quantum Interference Device Meta-atoms and Metamaterials: Experiment, Theory, and Analysis

Metamamterials are 1D, 2D or 3D arrays of articial atoms. The articial atoms, called "meta-atoms", can be any component with tailorable electromagnetic properties, such as resonators, LC circuits, nano particles, and so on. By designing the properties of individual meta-atoms and the interaction created by putting them in a lattice, one can create a metamaterial with intriguing properties not found in nature. My Ph. D. work examines the meta-atoms based on radio frequency superconducting quantum interference devices (rf-SQUIDs); their tunability with dc magnetic field, rf magnetic field, and temperature are studied. The rf-SQUIDs are superconducting split ring resonators in which the usual capacitance is supplemented with a Josephson junction, which introduces strong nonlinearity in the rf properties. At relatively low rf magnetic field, a magnetic field tunability of the resonant frequency of up to 80 THz/Gauss by dc magnetic field is observed, and a total frequency tunability of 100% is achieved. The macroscopic quantum superconducting metamaterial also shows manipulative self-induced broadband transparency due to a qualitatively novel nonlinear mechanism that is different from conventional electromagnetically induced transparency (EIT) or its classical analogs. A near complete disappearance of resonant absorption under a range of applied rf flux is observed experimentally and explained theoretically. The transparency comes from the intrinsic bi-stability and can be tuned on/ off easily by altering rf and dc magnetic fields, temperature and history. Hysteretic in situ 100% tunability of transparency paves the way for auto-cloaking metamaterials, intensity dependent filters, and fast-tunable power limiters. An rf-SQUID metamaterial is shown to have qualitatively the same behavior as a single rf-SQUID with regards to dc flux, rf flux and temperature tuning. The two-tone response of self-resonant rf-SQUID meta-atoms and metamaterials is then studied here via intermodulation (IM) measurement over a broad range of tone frequencies and tone powers. A sharp onset followed by a surprising strongly suppressed IM region near the resonance is observed. This behavior can be understood employing methods in nonlinear dynamics; the sharp onset, and the gap of IM, are due to sudden state jumps during a beat of the two-tone sum input signal. The theory predicts that the IM can be manipulated with tone power, center frequency, frequency difference between the two tones, and temperature. This quantitative understanding potentially allows for the design of rf-SQUID metamaterials with either very low or very high IM response.

Dynamic prediction models and optimization of polyacrylonitrile (PAN) stabilization processes for production of carbon fiber

Thermal stabilization process of polyacrylonitrile (PAN) is the slowest and the most energy-consuming step in carbon fiber production. As such, in industrial production of carbonfiber, this step is considered as amajor bottleneck in the whole process. Stabilization process parameters are usually many in number and highly constrained, leading to high uncertainty. The goal of this paper is to study and analyze the carbon fiber thermal stabilization process through presenting several effective dynamic models for the prediction of the process. The key point with using dynamic models is that using an evolutionary search technique, the heat of reaction can be optimized. The employed components of the study are Levenberg–Marquardt algorithm (LMA)-neural network (LMA-NN), Gauss–Newton (GN)-curve fitting, Taylor polynomial method, and a genetic algorithm. The results show that the procedure can effectively optimize a given PAN fiber heat of reaction based on determining the proper values of heating rampand temperature

Étude du nombre de polynômes irréductibles dans les corps finis avec certaines contraintes imposées aux coefficients

L'objectif de ce mémoire est de dénombrer les polynômes irréductibles unitaires sur un corps fini en prescrivant des contraintes sur les coefficients. Dans les prochaines pages, il sera question de fixer simplement des coefficients, ou simplement de fixer leur signe, leur cubicité ou leur quarticité.

Étude du nombre de polynômes irréductibles dans les corps finis avec certaines contraintes imposées aux coefficients

L'objectif de ce mémoire est de dénombrer les polynômes irréductibles unitaires sur un corps fini en prescrivant des contraintes sur les coefficients. Dans les prochaines pages, il sera question de fixer simplement des coefficients, ou simplement de fixer leur signe, leur cubicité ou leur quarticité.

Multivariate orthogonal polynomials and integrable systems

Multivariate orthogonal polynomials in D real dimensions are considered from the perspective of the Cholesky factorization of a moment matrix. The approach allows for the construction of corresponding multivariate orthogonal polynomials, associated second kind functions, Jacobi type matrices and associated three term relations and also Christoffel-Darboux formulae. The multivariate orthogonal polynomials, their second kind functions and the corresponding Christoffel-Darboux kernels are shown to be quasi-determinants as well as Schur complements of bordered truncations of the moment matrix; quasi-tau functions are introduced. It is proven that the second kind functions are multivariate Cauchy transforms of the multivariate orthogonal polynomials. Discrete and continuous deformations of the measure lead to Toda type integrable hierarchy, being the corresponding flows described through Lax and Zakharov-Shabat equations; bilinear equations are found. Varying size matrix nonlinear partial difference and differential equations of the 2D Toda lattice type are shown to be solved by matrix coefficients of the multivariate orthogonal polynomials. The discrete flows, which are shown to be connected with a Gauss-Borel factorization of the Jacobi type matrices and its quasi-determinants, lead to expressions for the multivariate orthogonal polynomials and their second kind functions in terms of shifted quasi-tau matrices, which generalize to the multidimensional realm, those that relate the Baker and adjoint Baker functions to ratios of Miwa shifted tau-functions in the 1D scenario. In this context, the multivariate extension of the elementary Darboux transformation is given in terms of quasi-determinants of matrices built up by the evaluation, at a poised set of nodes lying in an appropriate hyperplane in R^D, of the multivariate orthogonal polynomials. The multivariate Christoffel formula for the iteration of m elementary Darboux transformations is given as a quasi-determinant. It is shown, using congruences in the space of semi-infinite matrices, that the discrete and continuous flows are intimately connected and determine nonlinear partial difference-differential equations that involve only one site in the integrable lattice behaving as a Kadomstev-Petviashvili type system. Finally, a brief discussion of measures with a particular linear isometry invariance and some of its consequences for the corresponding multivariate polynomials is given. In particular, it is shown that the Toda times that preserve the invariance condition lay in a secant variety of the Veronese variety of the fixed point set of the linear isometry.

Temperature-averaged and total free-free Gaunt factors for κ and Maxwellian distributions of electrons

Aims. Optically thin plasmas may deviate from thermal equilibrium and thus, electrons (and ions) are no longer described by the Maxwellian distribution. Instead they can be described by κ-distributions. The free-free spectrum and radiative losses depend on the temperature-averaged (over the electrons distribution) and total Gaunt factors, respectively. Thus, there is a need to calculate and make available these factors to be used by any software that deals with plasma emission. Methods. We recalculated the free-free Gaunt factor for a wide range of energies and frequencies using hypergeometric functions of complex arguments and the Clenshaw recurrence formula technique combined with approximations whenever the difference between the initial and final electron energies is smaller than 10−10 in units of z2Ry. We used double and quadruple precisions. The temperature- averaged and total Gaunt factors calculations make use of the Gauss-Laguerre integration with 128 nodes. Results. The temperature-averaged and total Gaunt factors depend on the κ parameter, which shows increasing deviations (with respect to the results obtained with the use of the Maxwellian distribution) with decreasing κ. Tables of these Gaunt factors are provided.