Evaluation of semi-passive treatment technologies for septic lagoon capacity expansion

In Canada, increases in rural development has led to a growing need to effectively manage the resulting municipal and city sewage without the addition of significant cost- and energy- expending infrastructure. Storring Septic Service Limited is a family-owned, licensed wastewater treatment facility located in eastern Ontario. It makes use of a passive waste stabilization pond system to treat and dispose of waste and wastewater in an environmentally responsible manner. Storring Septic, like many other similar small-scale wastewater treatment facilities across Canada, has the potential to act as a sustainable eco-engineered facility that municipalities and service providers could utilize to manage and dispose of their wastewater. However, it is of concern that the substantial inclusion of third party material could be detrimental to the stability and robustness of the pond system. In order to augment the capacity of the current facility, and ensure it remains a self-sustaining system with the capacity to safely accept septage from other sewage haulers, it was hypothesized that pond effluent treatment could be further enhanced through the incorporation of one of three different technology solutions, which would allow the reduction of wastewater quality parameters below existing regulatory effluent discharge limits put in place by Ontario’s Ministry of the Environment and Climate Change (MOECC). Two of these solutions make use of biofilm technologies in order to enhance the removal of wastewater parameters of interest, and the third utilizes the natural water filtration capabilities of zebra mussels. Pilot-scale testing investigated the effects of each of these technologies on treatment performance under both cold and warm weather operation. This research aimed to understand the important mechanisms behind biological filtration methods in order to choose and optimize the best treatment strategy for full-scale testing and implementation. In doing so, a recommendation matrix was elaborated provided with the potential to be used as a universal operational strategy for wastewater treatment facilities located in environments of similar climate and ecology.

A Survey on Mobile Anchor Node Assisted Localization in Wireless Sensor Networks

Localization is one of the key technologies in Wireless Sensor Networks (WSNs), since it provides fundamental support for many location-aware protocols and applications. Constraints on cost and power consumption make it infeasible to equip each sensor node in the network with a Global Position System (GPS) unit, especially for large-scale WSNs. A promising method to localize unknown nodes is to use mobile anchor nodes (MANs), which are equipped with GPS units moving among unknown nodes and periodically broadcasting their current locations to help nearby unknown nodes with localization. A considerable body of research has addressed the Mobile Anchor Node Assisted Localization (MANAL) problem. However to the best of our knowledge, no updated surveys on MAAL reflecting recent advances in the field have been presented in the past few years. This survey presents a review of the most successful MANAL algorithms, focusing on the achievements made in the past decade, and aims to become a starting point for researchers who are initiating their endeavors in MANAL research field. In addition, we seek to present a comprehensive review of the recent breakthroughs in the field, providing links to the most interesting and successful advances in this research field.

Emergence and Innovation in Digital Learning: Foundations and Applications

Educational systems worldwide are facing an enormous shift as a result of sociocultural, political, economic, and technological changes. The technologies and practices that have developed over the last decade have been heralded as opportunities to transform both online and traditional education systems. While proponents of these new ideas often postulate that they have the potential to address the educational problems facing both students and institutions and that they could provide an opportunity to rethink the ways that education is organized and enacted, there is little evidence of emerging technologies and practices in use in online education. Because researchers and practitioners interested in these possibilities often reside in various disciplines and academic departments the sharing and dissemination of their work across often rigid boundaries is a formidable task. Contributors to Emergence and Innovation in Digital Learning include individuals who are shaping the future of online learning with their innovative applications and investigations on the impact of issues such as openness, analytics, MOOCs, and social media. Building on work first published in Emerging Technologies in Distance Education, the contributors to this collection harness the dispersed knowledge in online education to provide a one-stop locale for work on emergent approaches in the field. Their conclusions will influence the adoption and success of these approaches to education and will enable researchers and practitioners to conceptualize, critique, and enhance their understanding of the foundations and applications of new technologies.

Wasta in the Jordanian Culture: a Study in the Banking Sector

Due to globalisation, the emergence and expansion of new overseas markets, extensive use of information and communication technologies in global trade and growing competition between multinational companies, international Human Resource Management (HRM) is an increasingly attractive and popular area of study. However, much of our knowledge is built on an Anglo-Saxon/ European base and there is a paucity of research that considers the transfer of modern (western) principles of HRM to developing countries, particularly in the Middle East. Arguably, Jordan is one country that may benefit from the promise of quality, equality and profitability offered by the systemic approach to managing people. Thus, this paper introduces a PhD research project, currently in its first year, that considers the transfer of western recruitment and selection frameworks into Jordanian culture.

Application of battery energy storage in the Québec interconnection

Le Système Stockage de l’Énergie par Batterie ou Batterie de Stockage d’Énergie (BSE) offre de formidables atouts dans les domaines de la production, du transport, de la distribution et de la consommation d’énergie électrique. Cette technologie est notamment considérée par plusieurs opérateurs à travers le monde entier, comme un nouveau dispositif permettant d’injecter d’importantes quantités d’énergie renouvelable d’une part et d’autre part, en tant que composante essentielle aux grands réseaux électriques. De plus, d’énormes avantages peuvent être associés au déploiement de la technologie du BSE aussi bien dans les réseaux intelligents que pour la réduction de l’émission des gaz à effet de serre, la réduction des pertes marginales, l’alimentation de certains consommateurs en source d’énergie d’urgence, l’amélioration de la gestion de l’énergie, et l’accroissement de l’efficacité énergétique dans les réseaux. Cette présente thèse comprend trois étapes à savoir : l’Étape 1 - est relative à l’utilisation de la BSE en guise de réduction des pertes électriques ; l’Étape 2 - utilise la BSE comme élément de réserve tournante en vue de l’atténuation de la vulnérabilité du réseau ; et l’Étape 3 - introduit une nouvelle méthode d’amélioration des oscillations de fréquence par modulation de la puissance réactive, et l’utilisation de la BSE pour satisfaire la réserve primaire de fréquence. La première Étape, relative à l’utilisation de la BSE en vue de la réduction des pertes, est elle-même subdivisée en deux sous-étapes dont la première est consacrée à l’allocation optimale et le seconde, à l’utilisation optimale. Dans la première sous-étape, l’Algorithme génétique NSGA-II (Non-dominated Sorting Genetic Algorithm II) a été programmé dans CASIR, le Super-Ordinateur de l’IREQ, en tant qu’algorithme évolutionniste multiobjectifs, permettant d’extraire un ensemble de solutions pour un dimensionnement optimal et un emplacement adéquat des multiple unités de BSE, tout en minimisant les pertes de puissance, et en considérant en même temps la capacité totale des puissances des unités de BSE installées comme des fonctions objectives. La première sous-étape donne une réponse satisfaisante à l’allocation et résout aussi la question de la programmation/scheduling dans l’interconnexion du Québec. Dans le but de réaliser l’objectif de la seconde sous-étape, un certain nombre de solutions ont été retenues et développées/implantées durant un intervalle de temps d’une année, tout en tenant compte des paramètres (heure, capacité, rendement/efficacité, facteur de puissance) associés aux cycles de charge et de décharge de la BSE, alors que la réduction des pertes marginales et l’efficacité énergétique constituent les principaux objectifs. Quant à la seconde Étape, un nouvel indice de vulnérabilité a été introduit, formalisé et étudié ; indice qui est bien adapté aux réseaux modernes équipés de BES. L’algorithme génétique NSGA-II est de nouveau exécuté (ré-exécuté) alors que la minimisation de l’indice de vulnérabilité proposé et l’efficacité énergétique représentent les principaux objectifs. Les résultats obtenus prouvent que l’utilisation de la BSE peut, dans certains cas, éviter des pannes majeures du réseau. La troisième Étape expose un nouveau concept d’ajout d’une inertie virtuelle aux réseaux électriques, par le procédé de modulation de la puissance réactive. Il a ensuite été présenté l’utilisation de la BSE en guise de réserve primaire de fréquence. Un modèle générique de BSE, associé à l’interconnexion du Québec, a enfin été proposé dans un environnement MATLAB. Les résultats de simulations confirment la possibilité de l’utilisation des puissances active et réactive du système de la BSE en vue de la régulation de fréquence.

New Framework and Metrics for Economic Evaluation of Medical Technology in the Presence of Heterogeneity and Its Application to the Evaluation of Bariatric Surgery

Thesis (Ph.D.)--University of Washington, 2016-07

Mobile Technologies: Expectancy, Usage, and Acceptance of Clinical Staff and Patients at a University Medical Center

BACKGROUND: Despite their increasing popularity, little is known about how users perceive mobile devices such as smartphones and tablet PCs in medical contexts. Available studies are often restricted to evaluating the success of specific interventions and do not adequately cover the users' basic attitudes, for example, their expectations or concerns toward using mobile devices in medical settings. OBJECTIVE: The objective of the study was to obtain a comprehensive picture, both from the perspective of the patients, as well as the doctors, regarding the use and acceptance of mobile devices within medical contexts in general well as the perceived challenges when introducing the technology. METHODS: Doctors working at Hannover Medical School (206/1151, response 17.90%), as well as patients being admitted to this facility (213/279, utilization 76.3%) were surveyed about their acceptance and use of mobile devices in medical settings. Regarding demographics, both samples were representative of the respective study population. GNU R (version 3.1.1) was used for statistical testing. Fisher's exact test, two-sided, alpha=.05 with Monte Carlo approximation, 2000 replicates, was applied to determine dependencies between two variables. RESULTS: The majority of participants already own mobile devices (doctors, 168/206, 81.6%; patients, 110/213, 51.6%). For doctors, use in a professional context does not depend on age (P=.66), professional experience (P=.80), or function (P=.34); gender was a factor (P=.009), and use was more common among male (61/135, 45.2%) than female doctors (17/67, 25%). A correlation between use of mobile devices and age (P=.001) as well as education (P=.002) was seen for patients. Minor differences regarding how mobile devices are perceived in sensitive medical contexts mostly relate to data security, patients are more critical of the devices being used for storing and processing patient data; every fifth patient opposed this, but nevertheless, 4.8% of doctors (10/206) use their devices for this purpose. Both groups voiced only minor concerns about the credibility of the provided content or the technical reliability of the devices. While 8.3% of the doctors (17/206) avoided use during patient contact because they thought patients might be unfamiliar with the devices, (25/213) 11.7% of patients expressed concerns about the technology being too complicated to be used in a health context. CONCLUSIONS: Differences in how patients and doctors perceive the use of mobile devices can be attributed to age and level of education; these factors are often mentioned as contributors of the problems with (mobile) technologies. To fully realize the potential of mobile technologies in a health care context, the needs of both the elderly as well as those who are educationally disadvantaged need to be carefully addressed in all strategies relating to mobile technology in a health context.

Diagnostic Tests and their Application in the Management of Soil- and Water-borne Oomycete Pathogen Species

Oomycete diseases cause significant losses across a broad range of crop and aquaculture commodities worldwide. These losses can be greatly reduced by disease management practices steered by accurate and early diagnoses of pathogen presence. Determinations of disease potential can help guide optimal crop rotation regimes, varietal selections, targeted control measures, harvest timings and crop post-harvest handling. Pathogen detection prior to infection can also reduce the incidence of disease epidemics. Classical methods for the isolation of oomycete pathogens are normally deployed only after disease symptom appearance. These processes are often-time consuming, relying on culturing the putative pathogen(s) and the availability of expert taxonomic skills for accurate identification; a situation that frequently results in either delayed application, or routine ‘blanket’ over-application of control measures. Increasing concerns about pesticides in the environment and the food chain, removal or restriction of their usage combined with rising costs have focussed interest in the development and improvement of disease management systems. To be effective, these require timely, accurate and preferably quantitatve diagnoses. A wide range of rapid diagnostic tools, from point of care immunodiagnostic kits to next generation nucleotide sequencing have potential application in oomycete disease management. Here we review currently-available as well as promising new technologies in the context of commercial agricultural production systems, considering the impacts of specific biotic and abiotic and other important factors such as speed and ease of access to information and cost effectiveness

Developing Innovative TEL Practice in Teacher Education

This interactive symposium will focus on the use of different technologies in developing innovative practice in teacher education at one university in England. Technology Enhanced Learning (TEL) is a field of educational policy and practice that has the power to ignite diametrically opposing views and reactions amongst teachers and teacher educators, ranging across a spectrum from immense enthusiasm to untold terror. In a field where the skills and experience of individuals vary from those of digital natives (Prensky 2001) to lags and lurkers in digital spaces, the challenges of harnessing the potential of TEL are complex. The challenges include developing the IT skills of trainees and educators and the creative application of these skills to pedagogy in all areas of the curriculum. The symposium draws on examples from primary, secondary and post-compulsory teacher education to discuss issues and approaches to developing research capacity and innovative practice using different etools, many of which are freely available. The first paper offers theoretical and policy perspectives on finding spaces in busy professional lives to engage in research and develop research-informed practice. It draws on notions of teachers as researchers, practitioner research and evidenc-ebased practice to argue that engagement in research is integral to teacher education and an empowering source of creative professional learning for teachers and teacher educators. Whilst acknowledging the challenges of this stance, examples from our own research practice illustrate how e-tools can assist us in building the capacity and confidence of staff and students in researching and enhancing teaching, learning and assessment practice. The second paper discusses IT skills development through the TEL pathway for trainee teachers in secondary education across different curriculum subjects. The lead tutor for the TEL pathway will use examples of activities developed with trainee teachers and university subject tutors to enhance their skills in using e-tools, such as QR codes, Kahoot, Padlet, Pinterest and cloud based learning. The paper will also focus on how these skills and tools can be used for action Discussant - the wider use of technologies in a university centre for teacher education; course management, recruitment and mentor training. research, evaluation and feedback and for marking and administrative tasks. The discussion will finish with thoughts on widening trainee teachers’ horizons into the future direction of educational technology. The third paper considers institutional policies and strategies for promoting and embedding TEL, including an initiative called ‘The Learning Conversation’, which aims ‘to share, highlight, celebrate, discuss, problematise, find things out...’ about TEL through an online space. The lead for ‘The Learning Conversation’ will offer reflections on this and other initiatives across the institution involving trainee teachers, university subject tutors, librarians and staff in student support services who are using TEL to engage, enthuse and support students on campus and during placements in schools. The fourth paper reflects on the use of TEL to engage with trainee teachers in post-compulsory education. This sector of education and training is more fragmented than primary and secondary schools sectors and so the challenges of building a community of practice that can support the development of innovative practice are greater.

Production efficiency in catfish (Clarias gariepinus) Burchell, 1822 in Cross River State , Nigeria

In the study, the production efficiency of catfish in Cross River State was determined. Data was obtained from 120 fish farmers were randomly selected from Cross River Agricultural Zones, using a multistage random sampling technique. Multiple regression analysis model was the main tool of data analysis where different functions were tried. The results indicated that Cobb-Douglass production function had the best fit in explaining the relationship between output of catfish and inputs used, the coefficient of multiple determinant (R2 = 0.61) indicates that sixtyone percent of the variability in output of catfish is explained by the independent variables. The results also indicate that farmers’ educational level positively influence their level of efficiency in catfish production in the study area. The F-value of 16.427 indicates the overall significance of the model at 1 percent level, indicating that there is a significant linear relationship between the independent variables taken together and the yield of catfish produced in Cross River State. The marginal value products of fish pond size (farm size), labour and feed (diet) were N67.50, N 178.13 and N 728.00 respectively, while allocative efficiency for (farm size), labour and feed (diet) were (0.09 over utilized, 2.85 under utilized and 0.99 over utilized), respectively, there existed allocative in-efficiency, there is a high potential for catfish farmers to increase their yields and income. Based on the findings of this study, it is recommended that fish farmers should expand fish farms, improving on production efficiency and adopting new technologies. Regular awareness campaign about new technologies in fish farming should be embarked by extension agents to make fish farmers know the importance of adopting new technologies. KEYWORDS: Production efficiency, Catfish, Cobb-Douglass, Production function, Cross River State

Compétences orales et nouvelles technologies dans un cours de français langue étrangère

The oral communication skills should gain ground in language learning through new technologies. In this study examines the role that blogs, podcasts, social networks and telecollaborative projets have played in the development of oral production skills, as well as in learning and correction in pronunciation. During the period 2005 to 2015 several experiments with social media were conducted for this purpose as part of a French language course at the university of León in Spain. We will approach the results from our research in relation to the tools (blogs, podcasts, networks) and to the correction techniques for analyzing and evaluating the usefulness of new technologies in this training device.

AIR SIDE HEAT TRANSFER ENHANCEMENT IN HEAT EXCHANGERS UTILIZING INNOVATIVE DESIGNS AND THE ADDITIVE MANUFACTURING TECHNIQUE

Over the last decade, rapid development of additive manufacturing techniques has allowed the fabrication of innovative and complex designs. One field that can benefit from such technology is heat exchanger fabrication, as heat exchanger design has become more and more complex due to the demand for higher performance particularly on the air side of the heat exchanger. By employing the additive manufacturing, a heat exchanger design was successfully realized, which otherwise would have been very difficult to fabricate using conventional fabrication technologies. In this dissertation, additive manufacturing technique was implemented to fabricate an advanced design which focused on a combination of heat transfer surface and fluid distribution system. Although the application selected in this dissertation is focused on power plant dry cooling applications, the results of this study can directly and indirectly benefit other sectors as well, as the air-side is often the limiting side for in liquid or single phase cooling applications. Two heat exchanger designs were studied. One was an advanced metallic heat exchanger based on manifold-microchannel technology and the other was a polymer heat exchanger based on utilization of prime surface technology. Polymer heat exchangers offer several advantages over metals such as antifouling, anticorrosion, lightweight and often less expensive than comparable metallic heat exchangers. A numerical modeling and optimization were performed to calculate a design that yield an optimum performance. The optimization results show that significant performance enhancement is noted compared to the conventional heat exchangers like wavy fins and plain plate fins. Thereafter, both heat exchangers were scaled down and fabricated using additive manufacturing and experimentally tested. The manifold-micro channel design demonstrated that despite some fabrication inaccuracies, compared to a conventional wavy-fin surface, 15% - 50% increase in heat transfer coefficient was possible for the same pressure drop value. In addition, if the fabrication inaccuracy can be eliminated, an even larger performance enhancement is predicted. Since metal based additive manufacturing is still in the developmental stage, it is anticipated that with further refinement of the manufacturing process in future designs, the fabrication accuracy can be improved. For the polymer heat exchanger, by fabricating a very thin wall heat exchanger (150μm), the wall thermal resistance, which usually becomes the limiting side for polymer heat exchanger, was calculated to account for only up to 3% of the total thermal resistance. A comparison of air-side heat transfer coefficient of the polymer heat exchanger with some of the commercially available plain plate fin surface heat exchangers show that polymer heat exchanger performance is equal or superior to plain plate fin surfaces. This shows the promising potential for polymer heat exchangers to compete with conventional metallic heat exchangers when an additive manufacturing-enabled fabrication is utilized. Major contributions of this study are as follows: (1) For the first time demonstrated the potential of additive manufacturing in metal printing of heat exchangers that benefit from a sophisticated design to yield a performance substantially above the respective conventional systems. Such heat exchangers cannot be fabricated with the conventional fabrication techniques. (2) For the first time demonstrated the potential of additive manufacturing to produce polymer heat exchangers that by design minimize the role of thermal conductivity and deliver a thermal performance equal or better that their respective metallic heat exchangers. In addition of other advantages of polymer over metal like antifouling, anticorrosion, and lightweight. Details of the work are documented in respective chapters of this thesis.

A New Journal in the Field of Pharmaceutical Technology Is Born

International audience

A critical and interpretative investigation of the ethical dimension of policies about school digital technologies

This thesis examines digital technologies policies designed for Australian schools and the ways they are understood and interpreted by students, school staff, teachers, principals and policy writers. This study explores the ways these research participant groups interpret and understand the ‘ethical dimension’ of schools’ digital technologies policies for teaching and learning. In this thesis the ethical dimension is considered to be a dynamic concept which encompasses various elements including; decisions, actions, values, issues, debates, education, discourses, and notions of right and wrong, in relation to ethics and uses of digital technologies in schools. In this study policy is taken to mean not only written texts but discursive processes, policy documents including national declarations, strategic plans and ‘acceptable use’ policies to guide the use of digital technologies in schools. The research is situated in the context of changes that have occurred in Australia and internationally over the last decade that have seen a greater focus on the access to and use of digital technologies in schools. In Australian school education, the attention placed on digital technologies in schools has seen the release of policies at the national, state, territory, education office and school levels, to guide their use. Prominent among these policies has been the Digital Education Revolution policy, launched in 2007 and concluded in 2013. This research aims to answers the question: What does an investigation reveal about understandings of the ethical dimension of digital technologies policies and their implementation in school education? The objective of this research is to examine the ethical dimension of digital technologies policies and to interpret and understand the responses of the research participants to the issues, silences, discourses and language, which characterise this dimension. In doing so, it is intended that the research can allow the participants to have a voice that, may be different to the official discourses located in digital technologies policies. The thesis takes a critical and interpretative approach to policies and examines the role of digital technologies policies as discourse. Interpretative theory is utilised as it provides a conceptual lens from which to interpret different perspectives and the implications of these in the construction of meaning in relation to schools’ digital technologies policies. Critical theory is used in tandem with interpretative theory as it represents a conceptual basis from which to critique and question underlying assumptions and discourses that are associated with the ethical dimension of schools’ digital technologies policies. The research methods used are semi-structured interviews and policy document analysis. Policies from the national, state, territory, education office and school level were analysed and contribute to understanding the way the ethical dimension of digital technologies policies is represented as a discourse. Students, school staff, teachers, principals and policy writers participated in research interviews and their views and perspectives were canvassed in relation to the ethical use of digital technologies and the policies that are designed to regulate their use. The thesis presents an argument that the ethical dimension of schools’ digital technologies policies and use is an under-researched area, and there are gaps in understanding and knowledge in the literature which remain to be addressed. It is envisaged that the thesis can make a meaningful contribution to understand the ways in which schools’ digital technologies policies are understood in school contexts. It is also envisaged that the findings from the research can inform policy development by analysing the voices and views of those in schools. The findings of the policy analysis revealed that there is little attention given to the ethical dimension in digital technologies at the national level. A discourse of compliance and control pervades digital technologies policies from the state, education office and school levels, which reduces ethical considerations to technical, legal and regulatory requirements. The discourse is largely instrumentalist and neglects the educative dimension of digital technologies which has the capacity to engender their ethical use. The findings from the interview conversations revealed that students, school staff and teachers perceive digital technologies policies to be difficult to understand, and not relevant to their situation and needs. They also expressed a desire to have greater consultation and participation in the formation and enactment of digital technologies policies, and they believe they are marginalised from these processes in their schools. Arising from the analysis of the policies and interview conversations, an argument is presented that in the light of the prominent role played by digital technologies and their potential for enhancing all aspects of school education, more research is required to provide a more holistic and richer understanding of the policies that are constructed to control and mediate their use.

Upper Limb Posture Estimation in Robotic and Virtual Reality-based Rehabilitation.

New motor rehabilitation therapies include virtual reality (VR) and robotic technologies. In limb rehabilitation, limb posture is required to (1) provide a limb realistic representation in VR games and (2) assess the patient improvement. When exoskeleton devices are used in the therapy, the measurements of their joint angles cannot be directly used to represent the posture of the patient limb, since the human and exoskeleton kinematic models differ. In response to this shortcoming, we propose a method to estimate the posture of the human limb attached to the exoskeleton. We use the exoskeleton joint angles measurements and the constraints of the exoskeleton on the limb to estimate the human limb joints angles. This paper presents (a) the mathematical formulation and solution to the problem, (b) the implementation of the proposed solution on a commercial exoskeleton system for the upper limb rehabilitation, (c) its integration into a rehabilitation VR game platform, and (d) the quantitative assessment of the method during elbow and wrist analytic training. Results show that this method properly estimates the limb posture to (i) animate avatars that represent the patient in VR games and (ii) obtain kinematic data for the patient assessment during elbow and wrist analytic rehabilitation.