X-ray propagation in carbon nanotubes

The maintenance of the growth of the multibillion-dollar semiconductor industry requires the development of techniques for the fabrication and characterisation of nanoscale devices. Consequently, there is great interest in photolithography techniques such as extreme UV and x-ray. Both of these techniques are extremely expensive and technologically very demanding. In this paper we describe research on the feasibility of exploiting x-ray propagation within carbon nanotubes (CNT's) for the fabrication and characterisation of nanoscale devices. This work discusses the parameters determining the design space available. To demonstrate experimentally the feasibility of x-ray propagation, arrays of carbon nanotubes have been grown on silicon membranes. The latter are required to provide structural support for the CNT's while minimising energy loss. To form a waveguide metal is deposited between the nanotubes to block x-ray transmission in this region at the same time as cladding the CNT's. The major challenge has been to fill the spaces between the CNT's with material of sufficient thickness to block x-ray transmission while maintaining the structural integrity of the CNT's. Various techniques have been employed to fill the gaps between the nanotubes including electroplating, sputtering and evaporation. This work highlights challenges encountered in optimising the process.

Extraction of fibre network architecture by X-ray tomography and prediction of elastic properties using an affine analytical model

This paper proposes a method for extracting reliable architectural characteristics from complex porous structures using micro-computed tomography (μCT) images. The work focuses on a highly porous material composed of a network of fibres bonded together. The segmentation process, allowing separation of the fibres from the remainder of the image, is the most critical step in constructing an accurate representation of the network architecture. Segmentation methods, based on local and global thresholding, were investigated and evaluated by a quantitative comparison of the architectural parameters they yielded, such as the fibre orientation and segment length (sections between joints) distributions and the number of inter-fibre crossings. To improve segmentation accuracy, a deconvolution algorithm was proposed to restore the original images. The efficacy of the proposed method was verified by comparing μCT network architectural characteristics with those obtained using high resolution CT scans (nanoCT). The results indicate that this approach resolves the architecture of these complex networks and produces results approaching the quality of nanoCT scans. The extracted architectural parameters were used in conjunction with an affine analytical model to predict the axial and transverse stiffnesses of the fibre network. Transverse stiffness predictions were compared with experimentally measured values obtained by vibration testing. © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Assessment of impact of ten days fishing ban in the major spawning grounds of hilsa (Tenualosa ilisha, Fisher and Bianchi, 1984)

A study was undertaken to find out the impact of ten days fishing ban in the major spawning grounds of hilsa during October to December. The study revealed a positive impact of fishing ban during spawning season on reproduction success of hilsa. Proportionate distribution of male and female hilsa also showed a significant level of distribution in and around the spawning grounds where the ratio was 35:65. Percent of oozing hilsa during fishing ban period in the spawning grounds was observed 1.61%. About 5% spent hilsa was observed in the fish landing centers and was compared with the data of Global Environment Facility (GEF) and Bangladesh Fisheries Research Institute (BFRI) studies and was found about 2.80-3.57 times higher than that of the findings of 2002 and 2003. Estimated egg production value showed about 46,800 Kg of eggs could have been produced that indicating a positive impact of 10 days fishing ban in spawning season. Abundance of higher percentages of gravid hilsa was found which were not available in the same quantity and condition in the non-fishing ban period. During the present investigation, fairly higher amount of spent hilsa and juveniles were also observed in the spawning grounds. Along with the jatka fry, spawn and fries of other fishes were also found in higher quantity than the previous years and thus it is assumed that fishing ban also might have positive impact on the successful breeding of other fishes. Overall, the fishing ban was found effective for successful breeding of hilsa.

Co-management approach on fisher group: a case study on Ramsar site, Tanguar haor in Bangladesh

In Bangladesh, wetlands are managed through leasing system traditionally from time immemorial. Recently the Government accepted co-management approach for wetland fisheries management and this approach is being practiced in few wetlands for maximize revenue income. A study was carried out to evaluate trend and impact of co-management in Tanguar haor (a Ramsar site wetland) on fisheries resources and livelihood of resident people in the immediate vicinity of the wetland. In Tanguar haor, conflict between leaseholders and the local community was a common phenomenon in the past. Since 2003 the district administration of Sunamganj has been managing the vast wetland resources, however, local people participation was ignored in haor management system. Average monthly fish catch of fishermen increased by 17% after introduction of co-management system and 7 fish species reappeared after introduction of co-management. Average monthly volume of fish catch has increased from 70 kg to 87 kg. A well-defined management structure has been developed for integration of all people of Tanguar haor which would enable them to raise voice jointly and influence policy in their favour.

Youth power: interview [with an] artisanal fisher

Michael Rojas, a 24-year-old artisanal fisher from Caballo Island in Costa Rica, believes that youth can pursue fishing in an artisanally responsible and sustainable way.

Issues of HIV/AIDS/ health among the fisher communities of Lake Albert and Kyoga

The fisheries resources of Lakes Albert and Kyoga present a high potential for economic growth, food, employment and foreign earnings. However, livelihoods appear to be compromised with the emergence and rapid spread of HIV/AIDS in the fisher communities of L. Albert and Kyoga. HIV/AIDS is considered a silent epidemic that is unique, posing a great challenge to the fisheries managers, health service providers, development planners and the resource users themselves. Fishers have high HIV prevalence, as well as AIDS-related illnesses and mortality rates. The high HIV prevalence rates among the fishing communities in Uganda is between 10-40% compared to the national rates which lie between 6% and 7%. This indicates that the national programmes have not adequately addressed the plight of the fishing communities of Lakes Albert, and Kyoga and the consequences have been devastating. Men and women living in fishing villages across the world have been found to be between five and ten times more vulnerable to the disease than other communities (Tarzan et al 2005, FAO, 2007). The present prevalence rates among the fishing communities stands at 10 to 40 % (LVFO, 2008). Meanwhile the same fishing communities are the essential labour for the Lakes’ fishery industry which is thriving nationally and internationally. That resource potentially can alleviate poverty and the HIV/AIDS threat. Fishing communities are the hidden victims of the disease, mixing patterns with the general population could act as a reservoir of infection that could spill over into the general population to drive the epidemic. On L. Albert, a quarter of the fisher folk were HIV-positive by 1992 compared to 4% in a nearby Agricultural village. Since then, there have been no targeted studies to address or monitor the prevalence rates eight years later, yet the multiplicity factor is high. HIV/AIDS can be linked to unsustainable fisheries, as the labour force available would not go to deep waters to fish, instead would fish in the shallow waters as a coping mechanism. A further effect is the loss to National and local economies and reduced nutritional security for the wider population. HIV/AIDS remains a significant challenge that has created a mosaic of complexity in the fishery sector. This needs to be addressed. It is, therefore, paramount that a comprehensive study was under taken to address this pandemic and the phenomenon of HIV/AIDS based on the study objectives. 1. To determine the trend in HIV/AIDS infection among fishing communities and the factors affecting it 2. To assess the impacts of HIV/AIDS on fish production and the implications for fisheries management.

X-ray observation of micro-failures in granular piles approaching an avalanche

An X-ray imaging technique is used to probe the stability of 3-dimensional granular packs in a slowly rotating drum. Well before the surface reaches the avalanche angle, we observe intermittent plastic events associated with collective rearrangements of the grains located in the vicinity of the free surface. The energy released by these discrete events grows as the system approaches the avalanche threshold. By testing various preparation methods, we show that the pre-avalanche dynamics is not solely controlled by the difference between the free surface inclination and the avalanche angle. As a consequence, the measure of the pre-avalanche dynamics is unlikely to serve as a tool for predicting macroscopic avalanches.

The geometry and the number of contacts of monodisperse sphere packs using X-ray tomography

The three-dimensional structure of very large samples of monodisperse bead packs is studied by means of X-Ray Computed Tomography. We retrieve the coordinatesofeach bead inthe pack and wecalculate the average coordination number by using the tomographic images to single out the neighbors in contact. The results are compared with the average coordination number obtained in Aste et al. (2005) by using a deconvolution technique. We show that the coordination number increases with the packing fraction, varying between 6.9 and 8.2 for packing fractions between 0.59 and 0.64. © 2005 Taylor & Francis Group.

Gamma-ray spectroscopy at TRIUMF-ISAC

The 8π spectrometer at TRIUMF-ISAC consists of 20 Compton-suppressed germanium detectors and various auxiliary devices. The Ge array, once used for studies of nuclei at high angular momentum, has been transformed into the world's most powerful device dedicated to radioactive-decay studies. Many improvements in the spectrometer have been made, including a high-throughput data acquisition system, installation of a moving tape collector, incorporation of an array of 20 plastic scintillators for β-particle tagging, 5 Si(Li) detectors for conversion electrons, and 10 BaF2 detectors for fast-lifetime measurements. Experiments can be performed where data from all detectors are collected simultaneously, resulting in a very detailed view of the nucleus through radioactive decay. A number of experimental programmes have been launched that take advantage of the versatility of the spectrometer, and the intense beams available at TRIUMF-ISAC. © 2006 American Institute of Physics.

High-resolution γ-ray spectroscopy: A versatile tool for nuclear β-decay studies at TRIUMF-ISAC

High-resolution γ-ray spectroscopy is essential to fully exploit the unique, high-quality beams available at the next generation of radioactive ion beam facilities such as the TRIUMF isotope separator and accelerator (ISAC). The 8π spectrometer, which consists of 20 Compton-suppressed HPGe detectors, has recently been reconfigured for a vigorous research programme in weak interaction and nuclear structure physics. With the addition of a variety of ancillary detectors it has become the world's most powerful device dedicated to β-decay studies. This paper provides a brief overview of the apparatus and highlights from recent experiments. © 2005 IOP Publishing Ltd.

Local structure of Mn in (La1-xHox) 2/3Ca1/3MnO3 studied by X-ray absorption fine structure

Results of X-ray absorption fine structure measurements in manganites (La1-xHox)2/3Ca1/3MnO3 with 0.15 < x < 0.50 are presented. When LaMnO3 is doped with a, divalent element such as Ca2+, substituting for La3+, holes are induced in the filled Mn d orbitais. This leads to a, strong ferromagnetic coupling between Mn sites. Ca ions in La1-xCa xMnO3 introduce a distortion of the crystal lattice and mixed valence Mn ions (Mn3+ and Mn4+). On the other hand, in manganites (La1-xHox)2/3Ca 1/3MnO3 the substitution of La for Ho causes a lattice distortion and induces a disorder, which reduces a magnetic interaction. The ferromagnetic transition temperature and conductivity decrease very quickly with increasing x. The magnetic and transport properties of compounds depend on the local atomic structure around Mn ions. The information on the bond lengths and Debye-Waller factor are obtained from the extended X-ray absorption fine structure (EXAFS) data analysis. The charge state of Mn is determined from the position of the absorption edge in X-ray absorption near edge structure (XANES) data. XAFS results are in good agreement with magnetic characteristics of the studied materials.

Cortical thickness estimation of the proximal femur from multi-view Dual-Energy X-ray Absorptiometry (DXA)

Hip fracture is the leading cause of acute orthopaedic hospital admission amongst the elderly, with around a third of patients not surviving one year post-fracture. Although various preventative therapies are available, patient selection is difficult. The current state-of-the-art risk assessment tool (FRAX) ignores focal structural defects, such as cortical bone thinning, a critical component in characterizing hip fragility. Cortical thickness can be measured using CT, but this is expensive and involves a significant radiation dose. Instead, Dual-Energy X-ray Absorptiometry (DXA) is currently the preferred imaging modality for assessing hip fracture risk and is used routinely in clinical practice. Our ambition is to develop a tool to measure cortical thickness using multi-view DXA instead of CT. In this initial study, we work with digitally reconstructed radiographs (DRRs) derived from CT data as a surrogate for DXA scans: this enables us to compare directly the thickness estimates with the gold standard CT results. Our approach involves a model-based femoral shape reconstruction followed by a data-driven algorithm to extract numerous cortical thickness point estimates. In a series of experiments on the shaft and trochanteric regions of 48 proximal femurs, we validated our algorithm and established its performance limits using 20 views in the range 0°-171°: estimation errors were 0:19 ± 0:53mm (mean +/- one standard deviation). In a more clinically viable protocol using four views in the range 0°-51°, where no other bony structures obstruct the projection of the femur, measurement errors were -0:07 ± 0:79 mm. © 2013 SPIE.