Physical and electrochemical evaluation of ATO supported IrO2 catalyst for proton exchange membrane water electrolyser

Antimony doped tin oxide (ATO) was studied as a support material for IrO₂ in proton exchange membrane water electrolyser (PEMWE). Adams fusion method was used to prepare the IrO₂-ATO catalysts. The physical and electrochemical characterisation of the catalysts were carried out using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder conductivity, cyclic voltammetry (CV) and membrane electrode assembly (MEA) polarisation. The BET surface area and electronic conductivity of the supported catalysts were found to be predominantly arisen from the IrO₂. Supported catalyst showed higher active surface area than the pristine IrO₂ in CV analysis with 85% H₃PO₄ as electrolyte. The MEA performance using Nafion®−115 membrane at 80 °C and atmospheric pressure showed a better performance for IrO₂ loading ≥60 wt.% than the pristine IrO₂ with a normalised current density of 1625 mA cm⁻² @1.8 V for the 60% IrO₂-ATO compared to 1341 mA cm⁻² for the pristine IrO₂ under the same condition. The higher performance of the supported catalysts was mainly attributed to better dispersion of active IrO₂ on electrochemically inactive ATO support material, forming smaller IrO₂ crystallites. A 40 wt.% reduction in the IrO₂ was achieved by utilising the support material.

Air-Sea Exchange of Legacy POPs in the North Sea Based on Results of Fate and Transport, and Shelf-Sea Hydrodynamic Ocean Models

The air-sea exchange of two legacy persistent organic pollutants (POPs), γ-HCH and PCB 153, in the North Sea, is presented and discussed using results of regional fate and transport and shelf-sea hydrodynamic ocean models for the period 1996–2005. Air-sea exchange occurs through gas exchange (deposition and volatilization), wet deposition and dry deposition. Atmospheric concentrations are interpolated into the model domain from results of the EMEP MSC-East multi-compartmental model (Gusev et al, 2009). The North Sea is net depositional for γ-HCH, and is dominated by gas deposition with notable seasonal variability and a downward trend over the 10 year period. Volatilization rates of γ-HCH are generally a factor of 2–3 less than gas deposition in winter, spring and summer but greater in autumn when the North Sea is net volatilizational. A downward trend in fugacity ratios is found, since gas deposition is decreasing faster than volatilization. The North Sea is net volatilizational for PCB 153, with highest rates of volatilization to deposition found in the areas surrounding polluted British and continental river sources. Large quantities of PCB 153 entering through rivers lead to very high local rates of volatilization.

Investigation of supported IrO2 as electrocatalyst for the oxygen evolution reaction in proton exchange membrane water electrolyser

Indium tin oxide (ITO) was used as a support for IrO2 catalyst in the oxygen evolution reaction. IrO2 nanoparticles were deposited in various loading on commercially available ITO nanoparticle, 17–28 nm in size using the Adam's fusion method. The prepared catalysts were characterised using X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The BET surface area of the support (35 m2/g) was 3 times lower than the unsupported IrO2 (112.7 m2/g). The surface area and electronic conductivity of the catalysts were predominantly contributed by the IrO2. The supported catalysts were tested in a membrane electrode assembly (MEA) for electrolyser operation. The 90% IrO2-ITO gave similar performance (1.74 V@1 A/cm2) to that of the unsupported IrO2 (1.73 V@1 A/cm2) in the MEA polarisation test at 80 °C with Nafion 115 membrane which was attributed to a better dispersion of the active IrO2 on the electrochemically inactive ITO support, giving rise to smaller catalyst particle and thereby higher surface area. Large IrO2 particles on the support significantly reduced the electrode performance. A comparison of TiO2 and ITO as support material showed that, 60% IrO2 loading was able to cover the support surface and giving sufficient conductivity to the catalyst.

Momentum Trading in New York Stock Exchange (NYSE) Energy Stocks

This paper investigates whether the momentum effect exists in the NYSE energy sector. Momentum is defined as the strategy that buys (sells) these stocks that are best (worst) performers, over a pre-specified past period of time (the 'look-back' period), by constructing equally weighted portfolios. Different momentum strategies are obtained by changing the number of stocks included in these portfolios, as well as the look-back period. Next, their performance is compared against two benchmarks: the equally weighted portfolio consisting of most stocks in the NYSE energy index and the market portfolio, and the S&P500 index. The results indicate that the momentum effect is strongly present in the energy sector, and leads to highly profitable portfolios, improving the risk-reward measures and easily outperforming both benchmarks.

Synthesis of the C(7)-C(22)-Sector of (+)-Acutiphycin Via O-Directed Double Free Radical Alkyne Hydrostannation with Ph3SnH/Et3B, Double I-Sn Exchange and Double Stille Coupling

Abstract Image

Herein a new double O-directed free radical hydrostannation reaction is reported on the structurally complex dialkyldiyne 11. Through our use of a conformation-restraining acetal to help prevent stereocenter-compromising 1,5-H-atom abstraction reactions by vinyl radical intermediates, the two vinylstannanes of 10 were concurrently constructed with high stereocontrol using Ph3SnH/Et3B/O2. Distannane 10 was thereafter elaborated into the bis-vinyl iodide 9 via O-silylation and double I–Sn exchange; double Stille coupling of 9, O-desilylation, and oxidation thereafter furnished 8.

Outperformance in exchange-traded fund pricing deviations: Generalized control of data snooping bias

An investigation into exchange-traded fund (ETF) outperforrnance during the period 2008-2012 is undertaken utilizing a data set of 288 U.S. traded securities. ETFs are tested for net asset value (NAV) premium, underlying index and market benchmark outperformance, with Sharpe, Treynor, and Sortino ratios employed as risk-adjusted performance measures. A key contribution is the application of an innovative generalized stepdown procedure in controlling for data snooping bias. We find that a large proportion of optimized replication and debt asset class ETFs display risk-adjusted premiums with energy and precious metals focused funds outperforming the S&P 500 market benchmark. 

Exchange between sub-surface and surface oxygen vacancies on CeO2(111):a new surface diffusion mechanism

Using first principles calculations for O vacancy diffusion on CeO2(111), we locate a surface diffusion mechanism, the two-step O vacancy exchange one, which is more favored than the most common hopping mechanism. By analyzing the results, we identify quantitatively the physical origin of why the two-step exchange mechanism is preferred.

Knowledge Exchange, Spatial Analysis & Healthy Urban Environments (KESUE): Project Report

The Knowledge Exchange, Spatial Analysis and Healthy Urban Environments (KESUE) project has extended work previously undertaken by a QUB team of inter-disciplinary researchers engaged with the Physical Activity in the Regeneration of Connswater (PARC) project (Tully et al, 2013). The PARC project focussed on parts of East Belfast to assess the health impact of the Connswater Community Greenway. The KESUE project has aimed to extend some of the tools used initially in East Belfast so that they have data coverage of all of Belfast and Derry-Londonderry. The purpose of this has been to enable the development of evidence and policy tools that link features of the built environment with physical activity in these two cities. The project has used this data to help shape policy decisions in areas such as physical activity, park management, public transport and planning.

Working with a range of local partners who part-funded the project (City Councils in Belfast and Derry-Londonderry, Public Health Agency, Belfast Healthy Cities and Department of Regional Development), this project has mapped all the footpaths in the two cities (covering 37% of the NI population) and employed this to develop evidence used in strategies related to healthy urban planning. Using Geographic Information Systems (GIS), the footpath network has been used as a basis for a wide range of policy-relevant analyses including pedestrian accessibility to public facilities, site options for new infrastructure and assessing how vulnerable groups can access services such as pharmacies. Key outputs have been Accessibility Atlases and maps showing how walkability of the built environment varies across the two cities.

In addition to generating this useful data, the project included intense engagement with potential users of the research, which has led to its continued uptake in a number of policies and strategies, creating a virtuous circle of research, implementation and feedback. The project has proved so valuable to Belfast City Council that they have now taken on one of the researchers to continue the work in-house.