Stability of hydrotalcites formed from Bayer refinery environmental control processes

Bauxite refinery residues (red mud) are derived from the Bayer process by the digestion of crushed bauxite in concentrated sodium hydroxide at elevated temperatures and pressures. This slurry residue, if untreated, is unsuitable for discharge directly into the environment and is usually stored in tailing dams. The liquid portion has the potential for discharge, but requires pre-treatment before this can occur. The seawater neutralisation treatment facilitates a significant reduction in pH and dissolved metal concentrations, through the precipitation of hydrotalcite-like compounds and some other Mg, Ca, and Al hydroxide and carbonate minerals. The hydrotalcite-like compounds, precipitated during seawater neutralisation, also remove a range of transition metals, oxy-anions and other anionic species through a combination of intercalation and adsorption reactions: smaller anions are intercalated into the hydrotalcite matrix, while larger molecules are adsorbed on the particle surfaces. A phenomenon known as ‘reversion’ can occur if the seawater neutralisation process is not properly controlled. Reversion causes an increase in the pH and dissolved impurity levels of the neutralised effluent, rendering it unsuitable for discharge. It is believed that slow dissolution of components of the red mud residue and compounds formed during the neutralisation process are responsible for reversion. This investigation looked at characterising natural hydrotalcite (Mg6Al2(OH)16(CO3)∙4H2O) and ‘Bayer’ hydrotalcite (synthesised using the seawater neutralisation process) using a variety of techniques including X-ray diffraction, infrared and Raman spectroscopy, and thermogravimetric analysis. This investigation showed that Bayer hydrotalcite is comprised of a mixture of 3:1 and 4:1 hydrotalcite structures and exhibited similar chemical characteristic to the 4:1 synthetic hydrotalcite. Hydrotalcite formed from the seawater neutralisation of Bauxite refinery residues has been found not to cause reversion. Other components in red mud were investigated to determine the cause of reversion and this investigation found three components that contributed to reversion: 1) tricalcium aluminate, 2) hydrocalumite and 3) calcium hydroxide. Increasing the amount of magnesium in the neutralisation process has been found to be successful in reducing reversion.

The role of anxiety and perspective-taking strategy on affective empathic responses

Empathy is an important pro-social behaviour critical to a positive clientetherapist relationship. Therapist anxiety has been linked to reduced ability to empathise and lower client satisfaction with therapy. However, the nature of the relationship between anxiety and empathy is currently unclear. The current study investigated the effect of experimentally-induced anxiety on empathic responses elicited during three different perspective-taking tasks. Perspective-taking was manipulated within-subjects with all participants (N¼ 52) completing imagine-self, imagine-other and objective conditions. A threat of shock manipulation was used to vary anxiety between-subjects. Participants in the threat of shock condition reported higher levels of anxiety during the experiment and lower levels of empathyrelated distress for the targets than participants in the control condition. Perspective-taking was associated with higher levels of empathy-related distress and concern compared to the objective condition. The present results suggest that perspective-taking can to a large extent mitigate the influence of heightened anxiety on an individual’s ability to empathise.

Comparing retail union strategy in a neoliberal context : the case of Australia and New Zealand

Retail employees are amongst the most vulnerable workers in the context of neoliberal market economies. In many countries, low paid retail employees comprise around 10 per cent of the workforce (ABS 2011). The retail labour market is typically highly feminised and youthful, with many employees in part time and various forms of precarious employment (Tailby & Pollert 2011). However, the industry and its trade unions have rarely been the focus of academic study (Tilly & Carré 2011). This paper thus aims to analyse and compare trade union strategies in the retail industry in Australia and New Zealand, by utilising findings from a larger comparative study. The respective unions studied are the Shop Distributive and Allied Workers Union (SDA) in Australia and the National Distribution Union (NDU) in New Zealand. Data from interviews with union officials at different levels and from different regional locations in Australia and NZ are analysed. Union policy documents are also utilised to support the empirical data. Key findings from the comparison of retail unions’ strategy in Australia and NZ include: 1) the importance of institutional factors and internal political differences in shaping and constraining union strategies; 2) different emphases on external relationships and variations in partnership approaches; 3) the need to recruit to ‘stand still’ by retail unions in both countries; and, 4) similarities and differences in the unions’ organising approaches. The paper concludes by examining the implications of these findings for retail unions’ strategic choices and their ability to deliver workplace justice for employees.

Service delivery framework : an architectural strategy for next-generation service delivery in business network

The next-generation of service-oriented architecture (SOA) needs to scale for flexible service consumption, beyond organizational and application boundaries, into communities, ecosystems and business networks. In wider and, ultimately, global settings, new capabilities are needed so that business partners can efficiently and reliably enable, adapt and expose services. Those services can then be discovered, ordered, consumed, metered and paid for, through new applications and opportunities, driven by third-parties in the global “village”. This trend is already underway, in different ways, through different early adopter market segments. This paper proposes an architectural strategy for the provisioning and delivery of services in communities, ecosystems and business networks – a Service Delivery Framework (SDF). The SDF is intended to support multiple industries and deployments where a SOA platform is needed for collaborating partners and diverse consumers. Specifically, it is envisaged that the SDF allows providers to publish their services into network directories so that they can be repurposed, traded and consumed, and leveraging network utilities like B2B gateways and cloud hosting. To support these different facets of service delivery, the SDF extends the conventional service provider, service broker and service consumer of the Web Services Architecture to include service gateway, service hoster, service aggregator and service channel maker.

Sustaining a healthy workforce

The changing demographics of the mining workforce and the increasing demand for skilled workers increases the importance of sustaining a healthy workforce now and for the future. Although health is strongly related to safety, the two areas are not well integrated and the relationship is poorly understood. As such there is an important need to raise the profile of health within the Occupational Health and Safety (OH&S) domain. The mining industry carries health and safety risks, often greater than other occupations. Whilst the mining industry is regulated by stringent OH&S controls, the very nature of the work and environmental influences expose employees to a greater number of injury risk factors than many other industries. In contrast to its excellent safety record, compared to most other industries, the mining workforce has a high proportion of chronic health problems. These problems can be exacerbated by the ageing of the workforce, regional location of sites and organisational issues influencing work demands. A major focus has been on the treatment of these conditions with relatively limited attention to prevention strategies. An important prevention strategy is the raising of awareness among the workforce of health issues and the significant increase in the volume of health related information has provided an excellent opportunity to access relevant information. Unfortunately, this information is of varying quality, may not be evidence based, and may provide the wrong guidance to the development of interventions designed to improve health. Limited time of most employees and potential lack of knowledge of ability to differentiate quality information presents additional problems or barriers to increasing awareness of health issues...

L1 Learning Strategy Instruction does make a difference in EFL listening: An empirical study.

In language learning, listening is the basic skill which learners should begin to develop other skills, namely speaking, reading and writing. This sequence of language learning in most English as Foreign Language (EFL) settings goes against the stream, learning first reading and writing and later listening and speaking. This study investigates the effects of cognitive, process-based approach to instructing EFL listening strategies over 11 weeks during a semester in Persian (L1). Lower intermediate female participants (N = 50) came from a couple of EFL classrooms in an English Language Institute in Iran. The experimental group (n = 25) listened to their classroom activities using a methodology that led learners through four cognitive processes (guessing, making inference, identifying topics and repetition) in Persian was basically successful in EFL listening. The same teacher taught the control group (n = 25), which listened to the same classroom listening activities without any guided attention to the learning strategy process in Persian. A pre and post listening test made by a group of experts in the language institute tracked any development in light of cognitive learning strategy instruction in EFL listening through L1. The hypothesis was that the experimental group received the guided attention in L1 during the classroom listening activities made greater gains and was verified despite the partial improvement of the control group.

Mapping of shallow coastal groundwaters, their hydrology and environmental geochemistry : Pumicestone catchment, Southeast Queensland

Blooms of the toxic cyanobacterium majuscula Lyngbya in the coastal waters of southeast Queensland have caused adverse impacts on both environmental health and human health, and on local economies such as fishing and tourism. A number of studies have confirmed that the main limiting nutrients (“nutrients of concern”) that contribute to these blooms area Fe, DOC, N, P and also pH. This study is conducted to establish the distribution of these parameters in a typical southeast Queensland coastal setting. The study maps the geochemistry of shallow groundwater in the mainland Pumicestone catchment with an emphasis on the nutrients of concern to understand how these nutrients relate to aquifer materials, landuse and anthropogenic activities. The results of the study form a GIS information layer which will be incorporated into a larger GIS model being produced by Queensland Department of Environment and Resource Management (DERM) to support landuse management to avoid/minimize blooms of Lyngbya in Moreton Bay, southeast Queensland, and other similar settings. A total of 38 boreholes were established in the mainland Pumicestone region and four sampling rounds of groundwater carried out in both dry and wet conditions. These groundwater samples were measured in the field for physico-chemical parameters, and in the laboratory analyses for the nutrients of concern, and other major and minor ions. Aquifer materials were confirmed using the Geological Survey of Queensland digital geology map, and geomaterials were assigned to seven categories which are A (sands), B (silts, sandy silts), C (estuarine mud, silts), D (humid soils), E (alluvium), F (sandstone) and G (other bedrock). The results of the water chemistry were examined by use of the software package AquaChem/AqQA, and divided into six groundwater groups, based on groundwater chemical types and location of boreholes. The type of aquifer material and location, and proximity to waterways was found to be important because they affected physico-chemical properties and concentrations of nutrients of concern and dissolved ions. The analytical results showed that iron concentrations of shallow groundwaters were high due to acid sulfate soils, and also mud and silt, but were lower in sand materials. DOC concentrations of these shallow groundwaters in the sand material were high probably due to rapid infiltration. In addition, DOC concentrations in some boreholes were high because they were installed in organic rich wetlands. The pH values of boreholes were from acidic to near neutral; some boreholes with pH values were low (< 4), showing acid sulfate soils in these boreholes. Concentrations of total nitrogen and total phosphorus of groundwaters were generally low, and the main causes of elevated concentrations of total nitrogen and total phosphorus are largely due to animal and human wastes and tend to be found in localized source areas. Comparison of the relative percentage of nitrogen species (NH3/NH4< Org-N, NO3-N and NO2-N) demonstrated that they could be related to sources such as animal waste, residential and agricultural fertilizers, forest and vegetation, mixed residents and farms, and variable setting and vegetation covers. Total concentrations of dissolved ions in sampling round 3 (dry period) were higher than those in sampling round 2 (wet period) due to both evaporation of groundwater in the dry period and the dilution of rainfall in the wet period. This showed that the highest concentrations of nutrients of concern were due to acid sulfate soils, aquifer materials, landuse and anthropogenic activities and were typically in aquifer materials of E (alluvium) and C (estuarine muds) and locations of Burpengary, Caboolture, and Glass Mountain catchments.

Regulating coal seam gas in Queensland : lessons in an adaptive environmental management approach?

The current regulatory approach to coal seam gas projects in Queensland is based on the philosophy of adaptive environmental management. This method of “learning by doing” is implemented in Queensland primarily through the imposition of layered monitoring and reporting duties on the coal seam gas operator alongside obligations to compensate and “make good” harm caused. The purpose of this article is to provide a critical review of the Queensland regulatory approach to the approval and minimisation of adverse impacts from coal seam gas activities. Following an overview of the hallmarks of an effective adaptive management approach, this article begins by addressing the mosaic of approval processes and impact assessment regimes that may apply to coal seam gas projects. This includes recent Strategic Cropping Land reforms. This article then turns to consider the preconditions for land access in Queensland and the emerging issues for landholders relating to the negotiation of access and compensation agreements. This article then undertakes a critical review of the environmental duties imposed on coal seam gas operators relating to hydraulic fracturing, well head leaks, groundwater management and the disposal and beneficial use of produced water. Finally, conclusions are drawn regarding the overall effectiveness of the Queensland framework and the lessons that may be drawn from Queensland’s adaptive environmental management approach.

Environmental reporting and its relation to corporate environmental performance

This study examines how both the level and the nature of environmental information voluntarily disclosed by Australian firms relate to their underlying environmental performance. Disclosure is scored using an index developed by Clarkson et al. (2008) based on Global Reporting Initiative (GRI) Guidelines and the environmental performance measure is based on emission data available from the National Pollutant Inventory (NPI). The sample consists of 51 firms that reported to the NPI in both 2002 and 2006. The findings are as follows. First, descriptive statistics indicate that while there was modest improvement in disclosure between 2002 and 2006, the highest disclosure score obtained was just slightly in excess of 50% of the maximum available based on the GRI Guidelines. Second, the results consistently indicate that not only do firms with a higher pollution propensity disclose more environmental information; they also rely on disclosures that the GRI views as inherently more objective and verifiable. Taken together, these results suggest that concerns regarding the reliability of voluntary environmental disclosures in the Australian context remain valid and thereby potentially signal a need for both enhanced mandatory reporting requirements and improved enforcement. In this regard, our study also informs regulatory policy on mandatory disclosures of environmental performance.

QIPC low speed run-overs of young children research project final report

This final report outlines the research conducted by the Centre for Accident Research and Road Safety – Queensland (CARRS-Q) for the research project (title above). This report provides an outline of the project methodology, literature review, three stages of research results (including the focus group discussions, review of organisational records, documentation and initiatives, and analysis of previous CARRS-Q occupational road safety self-report surveys), and recommendations for intervention strategy and initiatives development and implementation.

Enacting strategy through projects : an archetypal approach

Project management is increasingly regarded as a strategic competency because projects play an active part in defining an organization’s relationship to its environment. It is now widely accepted that projects and programmes are at the centre of strategy implementation. However, the conditions and underlying assumptions of this dynamic relationship are still unclear. This paper aims to clarify the dynamics of the strategy process, by defining traditional approaches (corporate/business) and introducing three strategy core logics (archetypes). Building on this 'archetypology' the authors demonstrate how project management, through enactment and sense-making of strategy, enables organizations to face the challenge of complexity and uncertainty. While recognizing that the "traditional" methods of analysis and management remain valid under certain conditions, this paper offers new avenues of reflection concerning the necessary contextualization of the project management approaches in order to ensure coherence between archetypes, enactment, learning and decision-making.

Development priority zoning (DPZ)-led scenario simulation for regional land use change : the case of Suichang County, China

China has experienced an extraordinary level of economic development since the 1990s, following excessive competition between different regions. This has resulted in many resource and environmental problems. Land resources, for example, are either abused or wasted in many regions. The strategy of development priority zoning (DPZ), proposed by the Chinese National 11th Five-Year Plan, provides an opportunity to solve these problems by coordinating regional development and protection. In line with the rational utilization of land, it is proposed that the DPZ strategy should be integrated with regional land use policy. As there has been little research to date on this issue, this paper introduces a system dynamic (SD) model for assessing land use change in China led by the DPZ strategy. Land use is characterized by the prioritization of land development, land utilization, land harness and land protection (D-U-H-P). By using the Delphi method, a corresponding suitable prioritization of D-U-H-P for the four types of DPZ, including optimized development zones (ODZ), key development zones (KDZ), restricted development zones (RDZ), and forbidden development zones (FDZ) are identified. Suichang County is used as a case study in which to conduct the simulation of land use change under the RDZ strategy. The findings enable a conceptualization to be made of DPZ-led land use change and the identification of further implications for land use planning generally. The SD model also provides a potential tool for local government to combine DPZ strategy at the national level with land use planning at the local level.

Design for disassembly : an architectural strategy

A study of historic examples of buildings that were designed for disassembly reveals a number of important lessons in the technology employed. These lessons can inform designers such that they may better design for disassembly to attempt to increase the rates of reuse and recycling in the building industry.

The scalability and the strategy for EMR database encryption techniques

EMR (Electronic Medical Record) is an emerging technology that is highly-blended between non-IT and IT area. One methodology is to link the non-IT and IT area is to construct databases. Nowadays, it supports before and after-treatment for patients and should satisfy all stakeholders such as practitioners, nurses, researchers, administrators and financial departments and so on. In accordance with the database maintenance, DAS (Data as Service) model is one solution for outsourcing. However, there are some scalability and strategy issues when we need to plan to use DAS model properly. We constructed three kinds of databases such as plan-text, MS built-in encryption which is in-house model and custom AES (Advanced Encryption Standard) - DAS model scaling from 5K to 2560K records. To perform custom AES-DAS better, we also devised Bucket Index using Bloom Filter. The simulation showed the response times arithmetically increased in the beginning but after a certain threshold, exponentially increased in the end. In conclusion, if the database model is close to in-house model, then vendor technology is a good way to perform and get query response times in a consistent manner. If the model is DAS model, it is easy to outsource the database, however, some techniques like Bucket Index enhances its utilization. To get faster query response times, designing database such as consideration of the field type is also important. This study suggests cloud computing would be a next DAS model to satisfy the scalability and the security issues.