Speed sensorless vector control of induction machines

A novel rotor velocity estimation scheme applicable to vector controlled induction motors has been described. The proposed method will evaluate rotor velocity, ωr, on-line, does not require any extra transducers or injection of any signals, nor does it employ complicated algorithms such as MRAS or Kalman filters. Furthermore, the new scheme will operate at all velocities including zero with very little error. The procedure employs motor model equations, however all differential and integral terms have been eliminated giving a very fast, low-cost, effective and practical alternative to the current available methods. Simulation results verify the operation of the scheme under ideal and PWM conditions.

Television broadcast reception

The sections in this article are: Vestigial Sideband Modulation, Spectrum Allocation, VHF Versus UHF Propagation, Receivers, Interference, Multipath Equalization, and Digital Receivers

Avaliação e desenvolvimento de produtos eletro-eletrônicos orientados ao meio-ambiente

Este trabalho trata sobre um assunto relativamente novo, mas com uma importância cada vez maior no desenvolvimento de produtos. Trata-se do Projeto para o Meio-Ambiente (Design for Environment - DFe). São analisados os aspectos do DFe relacionados com o desenvolvimento de produtos eletro-eletrônicos, abrangendo métricas ambientais, práticas de projeto e métodos de análise de produtos. Estes conhecimentos são aplicados no desenvolvimento de um conjunto de métricas ambientais e de uma metodologia de avaliação ambiental de produtos, a serem adotadas pela Springer Carrier SA no desenvolvimento de seus novos produtos. Esta ferramenta foi criada através da análise de uma ferramenta anterior, desenvolvida nos Estados Unidos, mas incorporou sugestões presentes na literatura e a experiência prática acumulada pelo autor. Este trabalho trata sobre um assunto relativamente novo, mas com uma importância cada vez maior no desenvolvimento de produtos. Trata-se do Projeto para o Meio-Ambiente (Design for Environment - DFe). São analisados os aspectos do DFe relacionados com o desenvolvimento de produtos eletro-eletrônicos, abrangendo métricas ambientais, práticas de projeto e métodos de análise de produtos. Estes conhecimentos são aplicados no desenvolvimento de um conjunto de métricas ambientais e de uma metodologia de avaliação ambiental de produtos, a serem adotadas pela Springer Carrier SA no desenvolvimento de seus novos produtos. Esta ferramenta foi criada através da análise de uma ferramenta anterior, desenvolvida nos Estados Unidos, mas incorporou sugestões presentes na literatura e a experiência prática acumulada pelo autor.

Sistema automatizado para o aproveitamento de água cinza e azul, com controle de PH utilizando lógica fuzzy

Every day, water scarcity becomes a more serious problem and, directly affects global society. Studies are directed in order to raise awareness of the rational use of this natural asset that is essential to our survival. Only 0.007% of the water available in the world have easy access and can be consumed by humans, it can be found in rivers, lakes, etc... To better take advantage of the water used in homes and small businesses, reuse projects are often implemented, resulting in savings for customers of water utilities. The reuse projects involve several areas of engineering, like Environmental, Chemical, Electrical and Computer Engineering. The last two are responsible for the control of the process, which aims to make gray water (soapy water), and clear blue water (rain water), ideal for consumption, or for use in watering gardens, flushing, among others applications. Water has several features that should be taken into consideration when it comes to working its reuse. Some of the features are, turbidity, temperature, electrical conductivity and, pH. In this document there is a proposal to control the pH (potential Hydrogen) through a microcontroller, using the fuzzy logic as strategy of control. The controller was developed in the fuzzy toolbox of Matlab®

Transmission network expansion planning considering phase-shifter transformers

This paper presents a novel mathematical model for the transmission network expansion planning problem. Main idea is to consider phase-shifter (PS) transformers as a new element of the transmission system expansion together with other traditional components such as transmission lines and conventional transformers. In this way, PS are added in order to redistribute active power flows in the system and, consequently, to diminish the total investment costs due to new transmission lines. Proposed mathematical model presents the structure of a mixed-integer nonlinear programming (MINLP) problem and is based on the standard DC model. In this paper, there is also applied a specialized genetic algorithm aimed at optimizing the allocation of candidate components in the network. Results obtained from computational simulations carried out with IEEE-24 bus system show an outstanding performance of the proposed methodology and model, indicating the technical viability of using these nonconventional devices during the planning process. Copyright © 2012 Celso T. Miasaki et al.

Estrutura eletrônica e propriedades elétricas fotoinduzidas em filmes finos de SnO2 com dopagem de Sb, e formação de heteroestruturas com TiO2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicação da logística reversa como solução para gestão dos resíduos eletrônicos

The present study aimed to analyze how develops the reverse logistics process applied in electrical and electronic products. Such analysis was obtained through literature search and with the completion of a case study, which was developed at the company's Oxil Reverse Manufacture, showing the advantages obtained as well as the difficulties faced in the implementation of the reverse logistics process. The development of this research shows its importance in so far as the residues generated by electronic components, which are one of the most harmful to the environment and harmful to human health, highly possessing heavy metals and non-biodegradable materials in their composition. In this way, the components collected from this activity, should be properly recycled, reused and finally housed in suitable location, these steps that are part of the reverse logistics process

Contribuições para a melhoria da gestão de resíduos de eletroeletrônicos no Brasil, no contexto da sustentabilidade ambiental

Pós-graduação em Engenharia de Produção - FEG

Utilização de painéis solares fotovoltaicos no segmento residencial

In order to diversify the global and national energy matrix and reduce harmful impacts on the environment caused by the emission of polluting gases into the atmosphere, the use of clean and renewable energy sources is presented as a good alternative. This work discusses the use of photovoltaic solar energy, a source that presents such characteristics. The photovoltaic system under study is the type distributed connected to the grid, in the residential segment. It is informed of its use in the global and national levels. They are also present their characteristics, electrical and electronic circuits that make up the equipment required for its operation and the design of a system to be installed in a residence

A Comparison of Induction Motor Starting Methods Being Powered by a Diesel-Generator Set

Starting induction motors on isolated or weak systems is a highly dynamic process that can cause motor and load damage as well as electrical network fluctuations. Mechanical damage is associated with the high starting current drawn by a ramping induction motor. In order to compensate the load increase, the voltage of the electrical system decreases. Different starting methods can be applied to the electrical system to reduce these and other starting method issues. The purpose of this thesis is to build accurate and usable simulation models that can aid the designer in making the choice of an appropriate motor starting method. The specific case addressed is the situation where a diesel-generator set is used as the electrical supplied source to the induction motor. The most commonly used starting methods equivalent models are simulated and compared to each other. The main contributions of this thesis is that motor dynamic impedance is continuously calculated and fed back to the generator model to simulate the coupling of the electrical system. The comparative analysis given by the simulations has shown reasonably similar characteristics to other comparative studies. The diesel-generator and induction motor simulations have shown good results, and can adequately demonstrate the dynamics for testing and comparing the starting methods. Further work is suggested to refine the equivalent impedance presented in this thesis.

Utilização de painéis solares fotovoltaicos no segmento residencial

In order to diversify the global and national energy matrix and reduce harmful impacts on the environment caused by the emission of polluting gases into the atmosphere, the use of clean and renewable energy sources is presented as a good alternative. This work discusses the use of photovoltaic solar energy, a source that presents such characteristics. The photovoltaic system under study is the type distributed connected to the grid, in the residential segment. It is informed of its use in the global and national levels. They are also present their characteristics, electrical and electronic circuits that make up the equipment required for its operation and the design of a system to be installed in a residence

Thin-Film Sparse Boundary Array Design for Passive Acoustic Mapping During Ultrasound Therapy

A new 2-D hydrophone array for ultrasound therapy monitoring is presented, along with a novel algorithm for passive acoustic mapping using a sparse weighted aperture. The array is constructed using existing polyvinylidene fluoride (PVDF) ultrasound sensor technology, and is utilized for its broadband characteristics and its high receive sensitivity. For most 2-D arrays, high-resolution imagery is desired, which requires a large aperture at the cost of a large number of elements. The proposed array's geometry is sparse, with elements only on the boundary of the rectangular aperture. The missing information from the interior is filled in using linear imaging techniques. After receiving acoustic emissions during ultrasound therapy, this algorithm applies an apodization to the sparse aperture to limit side lobes and then reconstructs acoustic activity with high spatiotemporal resolution. Experiments show verification of the theoretical point spread function, and cavitation maps in agar phantoms correspond closely to predicted areas, showing the validity of the array and methodology.