Avaliação genética da eficiência reprodutiva em vacas pardo-suíças por meio da análise de sobrevivência

Among the traits of economic importance to dairy cattle livestock those related to sexual precocity and longevity of the herd are essential to the success of the activity, because the stayability time of a cow in a herd is determined by their productive and reproductive lives. In Brazil, there are few studies about the reproductive efficiency of Swiss-Brown cows and no study was found using the methodology of survival analysis applied to this breed. Thus, in the first chapter of this study, the age at first calving from Swiss-Brown heifers was analyzed as the time until the event by the nonparametric method of Kaplan-Meier and the gamma shared frailty model, under the survival analysis methodology. Survival and hazard rate curves associated with this event were estimated and identified the influence of covariates on such time. The mean and median times at the first calving were 987.77 and 1,003 days, respectively, and significant covariates by the Log-Rank test, through Kaplan-Meier analysis, were birth season, calving year, sire (cow s father) and calving season. In the analysis by frailty model, the breeding values and the frailties of the sires (fathers) for the calving were predicted modeling the risk function of each cow as a function of the birth season as fixed covariate and sire as random covariate. The frailty followed the gamma distribution. Sires with high and positive breeding values possess high frailties, what means shorter survival time of their daughters to the event, i.e., reduction in the age at first calving of them. The second chapter aimed to evaluate the longevity of dairy cows using the nonparametric Kaplan-Meier and the Cox and Weibull proportional hazards models. It were simulated 10,000 records of the longevity trait from Brown-Swiss cows involving their respective times until the occurrence of five consecutive calvings (event), considered here as typical of a long-lived cow. The covariates considered in the database were age at first calving, herd and sire (cow s father). All covariates had influence on the longevity of cows by Log-Rank and Wilcoxon tests. The mean and median times to the occurrence of the event were 2,436.285 and 2,437 days, respectively. Sires that have higher breeding values also have a greater risk of that their daughters reach the five consecutive calvings until 84 months

O papel das rotas e da obtenção de informações sobre a eficiência no forrageio de dinoponera quadriceps em ambiente natural

In this study, we investigated the role of routes and information attainment for the queenless ant species Dinoponera quadriceps foraging efficiency. Two queenless ant colonies were observed in an area of Atlantic secondary Forest at the FLONA-ICMBio of Nisia Floresta, in the state of Rio Grande do Norte, northeastern Brazil, at least once a week. In the first stage of the study, we observed the workers, from leaving until returning to the colony. In the second stage, we introduced a acrylic plate (100 x 30 x 0,8 cm) on a selected entrance of the nest early in the morning before the ants left the nest. All behavioral recordings were done through focal time and all occurence samplings. The recording windows were of 15 minutes with 1 minute interval, and 5 minute intervals between each observation window. Foraging was the main activity when the workers were outside the nest. There was a positive correlation between time outside the nest and distance travelled by the ants. These variables influenced the proportion of resource that was taken to the nest, that is, the bigger its proportion, the longer the time outside and distance travelled during the search. That proportion also influenced the time the worker remained in the nest before a new trip, the bigger the proportion of the item, the shorter was the time in the nest. During all the study, workers showed fidelity to the route and to the sectors in the home range, even when the screen was in the ant´s way, once they deviated and kept the route. The features of foraging concerning time, distance, route and flexibility to go astray by the workers indicate that decisions are made by each individual and are optimal in terms of a cost-benefit relation. The strategy chosen by queenless ants fits the central place foraging and marginal value theorem theories and demonstrate its flexibility to new informations. This indicates that the workers can learn new environmental landmarks to guide their routes

Reavaliação da eficiência de óleo de coco saponificado e de sua microemulsão como inibidores de corrosão em uma célula eletroquímica

An interesting development in surfactants science and technology is their application as corrosion inhibitors, since they act as protective films over anodic and cathodic surfaces. This work aims to investigate the efficiency of saponified coconut oil (SCO) as corrosion inhibitor and of microemulsified system (SCO + butanol + kerosene oil + distilled water), in saline medium, using an adapted instrumented cell, via techniques involving linear polarization resistance (LPR) and mass loss coupons (MLC). For this, curves of efficiency versus SCO concentration (ranging between 0 and 75 ppm) have been constructed. According to the obtained results, the following efficiency levels were reached with OCS: 98% at a 75 ppm concentration via the LPR method and 95% at 75 ppm via the MLC method. The microemulsified system, for a concentration of 15 ppm of SCO, obtained maximum inhibition of 97% (LPR) and 93% (MLC). These data indicate that it is possible to optimize the use of SCO in similar applications. Previous works have demonstrated that maximal efficiencies below 90% are attained, typically 65% as free molecules and 77% in microemulsified medium, via the LPR method in a different type of cell. Therefore, it can be concluded that the adapted instrumented cell (in those used methods) showed to be an important tool in this kind of study and the SCO was shown effective in the inhibition of the metal

Avaliação termoanalítica da eficiência de antioxidantes na estabilidade oxidativa do biodiesel de mamona

The biodiesel is defined as the mono-alkyl ester derived from long-chain fatty acids, from renewable sources such as vegetable oils or animal fat, whose use is associated with the replacement of fossil fuels in diesel engine cycle. The biodiesel is susceptible to oxidation when exposed to air and this process of oxidation affects the quality of fuel, mainly due to long periods of storage. Because of this, the oxidation stability has been the focus of numerous researches since it directly affects the producers, distributors and users of fuel. One of the possibilities to increase the resistance of biodiesel is the autoxidation treatment with inhibitors of oxidation. The antioxidants can be used as potential inhibitors of the effects of oxidation on the kinematic viscosity and the index of acidity of biodiesel, thereby increasing oxidative stability. This work aims to examine the efficiency of antioxidants, α-tocopherol and butylated hydroxy-toluene (BHT), added the biodiesel content of remembrance through Pressurized-Differential Scanning Calorimetry (P-DSC), Thermogravimetry (TG) and Petrology. The results showed that the use of antioxidant BHT, at the concentration of 2000ppm, increased resistance to oxidation of the biodiesel and oxidative induction time (OIT), which is a better result as antioxidant than the α-tocopherol. With the thermogravimetric analysis, it was observed that the biodiesel presented an initial decomposition temperature of lower tendency than that of oil, demonstrating to be more volatile, bearing great similarity to the diesel and being characterized as an alternative fuel. The rheological analysis indicated that each sample of biodiesel behaved as a Newtonian fluid

Eficiência do processo de obtenção do biodiesel de girassol usando o catalisador KNO3/Al2O3

It is known that the head office world energetics is leaning in the fossil fuels. However, the world panorama is changing quickly, for linked reasons to three of the humanity's great concerns in that century beginning: environment, global economy and energy. The biodiesel production is based on the transesterificação of vegetable oils or animal fats, using catalysts homogeneous or heterogeneous. The process of heterogeneous transesterificação presents lower conversions in comparison with the homogeneous, however, it doesn't present corrosion problems and it reduces to the occurrence of parallel reactions as saponification. In this sense, this work has for purpose the synthesis of a heterogeneous catalyst, KNO3/Al2O3, that soon afterwards was used in the reaction of transesterificação of the oil of the Helianthus annuus L. (sunflower). The solid materials (it supports and catalyst) they were analyzed by diffraction of ray-X (XRD) and electronic microscope of sweeping (MEV). After the analysis of Al2O3, a structure monophase amorphous tetragonal was verified, with characteristic patterns of that material, what could not be visualized in the difratograma of the catalyst. The biodiesel obtained with 4% wt. of KNO3/Al2O3 it was what obtained a better cinematic viscosity 8,3 mm2/s, comparing with the norms of ANP, and it also presented the best conversion tax in ethyl ésteres, in accordance with the quantitative measure starting from TG, that was of 60%. While the biodiesel with 6% wt. and with 8% wt. of KNO3/Al2O3 it was it that no transesterificou, because it was observed in the analysis termogravimétrica of those two materials, a single thermal event, that it corresponds the decomposition or volatilization of the triglycerides

Remoção, por flotação, de óleo em águas produzidas na indústria de petróleo: eficiência e modelagem do processo

The separation oil-water by the use of flotation process is characterized by the involvement between the liquid and gas phases. For the comprehension of this process, it s necessary to analyze the physical and chemical properties command float flotation, defining the nature and forces over the particles. The interface chemistry has an important role on the flotation technology once, by dispersion of a gas phase into a liquid mixture the particles desired get stuck into air bubbles, being conduced to a superficial layer where can be physically separated. Through the study of interface interaction involved in the system used for this work, was possible to apply the results in an mathematical model able to determine the probability of flotation using a different view related to petroleum emulsions such as oil-water. The terms of probability of flotation correlate the collision and addition between particles of oil and air bubbles, that as more collisions, better is the probability of flotation. The additional probability was analyzed by the isotherm of absorption from Freundlich, represents itself the add probability between air bubbles and oil particles. The mathematical scheme for float flotation involved the injected air flow, the size of bubbles and quantity for second, the volume of float cell, viscosity of environment and concentration of demulsifier. The results shown that the float agent developed by castor oil, pos pH variation, salt quantity, temperature, concentration and water-oil quantity, presented efficient extraction of oil from water, up to 95%, using concentrations around 11 ppm of demulsifier. The best results were compared to other commercial products, codified by ―W‖ and ―Z‖, being observed an equivalent demulsifier power between Agflot and commercial product ―W‖ and superior to commercial product ―Z‖

Eficiência de extração de cobre e níquel utilizando sistemas microemulsionados bifásicos e trifásicos

The environmental impact due to the improper disposal of metal-bearing industrial effluents imposes the need of wastewater treatment, since heavy metals are nonbiodegradable and hazardous substances that may cause undesirable effects to humans and the environment. The use of microemulsion systems for the extraction of metal ions from wastewaters is effective when it occurs in a Winsor II (WII) domain, where a microemulsion phase is in equilibrium with an aqueous phase in excess. However, the microemulsion phase formed in this system has a higher amount of active matter when compared to a WIII system (microemulsion in equilibrium with aqueous and oil phases both in excess). This was the reason to develop a comparative study to evaluate the efficiency of two-phases and three-phases microemulsion systems (WII and WIII) in the extraction of Cu+2 and Ni+2 from aqueous solutions. The systems were composed by: saponified coconut oil (SCO) as surfactant, n-Butanol as cosurfactant, kerosene as oil phase, and synthetic solutions of CuSO4.5H2O and NiSO4.6H2O, with 2 wt.% NaCl, as aqueous phase. Pseudoternary phase diagrams were obtained and the systems were characterized by using surface tension measurements, particle size determination and scanning electron microscopy (SEM). The concentrations of metal ions before and after extraction were determined by atomic absorption spectrometry. The extraction study of Cu+2 and Ni+2 in the WIII domain contributed to a better understanding of microemulsion extraction, elucidating the various behaviors presented in the literature for these systems. Furthermore, since WIII systems presented high extraction efficiencies, similar to the ones presented by Winsor II systems, they represented an economic and technological advantage in heavy metal extraction due to a small amount of surfactant and cosurfactant used in the process and also due to the formation of a reduced volume of aqueous phase, with high concentration of metal. Considering the reextraction process, it was observed that WIII system is more effective because it is performed in the oil phase, unlike reextraction in WII, which is performed in the aqueous phase. The presence of the metalsurfactant complex in the oil phase makes possible to regenerate only the surfactant present in the organic phase, and not all the surfactant in the process, as in WII system. This fact allows the reuse of the microemulsion phase in a new extraction process, reducing the costs with surfactant regeneration

Eficiência mastigatória e impacto da saúde oral na qualidade de vida em pacientes reabilitados com próteses totais removíveis implanto-suportadas

Edentulous patients with complaint about mandibular conventional denture might experience poor masticatory function and negative impact of oral health on quality of life. The aim of this controlled clinical trial was to evaluate the effect of mandibular overdenture on oral health-related quality of life and masticatory efficacy in patients wearing mandibular complete dentures. The edentulous patients (n=16) were rehabilitated with new maxillary and mandibular complete dentures and, after 3 months, mandibular overdentures retained by 2 implants (bar-clip system) were fabricated. The Brazilian version of OHIP-Edent questionnaire was used to assess the oral healthrelated quality of life. Masticatory efficacy was evaluated through a colorimetric method with chewing capsules. The mean OHIP-Edent score was 8.5 with conventional dentures and 2.0 with mandibular overdenture, which means a positive impact of oral health on quality of life with overdentures (p=0.001). The mean absorbance for masticatory efficacy was 0.025 for conventional dentures and 0.073 for overdentures. There was statistically significant difference for masticatory efficacy before and after implants rehabilitation (p=0.003). However, there was no correlation between masticatory efficacy and OHIP (p>0.05). So, mandibular overdenture retained by 2 implants improved the quality of life and masticatory efficacy of edentulous patients with complaint about mandibular conventional complete dentures

Avaliação da eficiência da técnica de obturação pela compressão hidrùlica vertical após instrumentação automatizada

The purpose of this study was to evaluate through radiographic and microscopic analysis the efficiency of the filling techniques by vertical hidraulic compression after the root canal mechanical instrumentation in vitro as well to evaluate the marginal apical leakage through macroscopic and microscopic analysis. Thirty human mandibular molars were used , they were divided on three groups, these were subdivided on six subgroups with five specimens each, come down to 106 root canals filled. Initially, the teeth were instrumented with Profile system series 29 and filled with two ways: single accessory cone or single cone associated with gutta-percha secundary cone, with Fill Canal sealer or Sealer 26. Completed the filling, the teeth were coated with araldit and finger -nail polish except for the apical 2 mm and dried for 3 hours, thep radiographs were taken of the teeth in orto and disto-radiai directions. Next, the coronal seal was carried out with composite resin photopolymerized and with their process of making impermeable. Teeth of positive controls were used without araldit and finger-nail polish whereas the negative controls were used with total coat of araldit and finger-nail polish. The specimens were placed in 2% Methylene Blue dye for 24 hours and thermocycled for 7 days. Afterwards, sections were made of each tooth at mesial and distal roat, after this the teeth were radiographed at buccolíngual direction for a macroscopic analysis and at buccolingual and mesiodistal directions for assessment of the marginal apical leakage. Cross sections were made 3 mm to 3mm since the tooth apice. The sections obtained for each group were observed with a stereomicroscope to evaluate the quality of the root canal filling and the marginal apical leakage. The results showed that: In the four techniques the marginal dye leakage was present in the apical third; in all groups the quality of the root canal filling in the radiography was better at mesial root canal and the single cone technique showed inefficient when only a single distal root canal was present. In the radiographic evaluation the best quality of the root canal filling was observed in the 1A group (single accessory cone + FiIl Canal), as in the mesial root as in the distal root wich Shcwed twe root canals: when the distaI root had only one canal. the best result was showed by 28 group (single accessory cone associated with secundary cone + Fill Canal) In the macroscopic analysis of longitudinal !eaKage (outside surface). less leakage was showed as In the mesial root as in the distal root in the negative control group (3) followed 2A group (single accessory cone + Sealer 26). When the microscopic analysis of tranversal leakage of both roots (inside surface) was carried out. the groups that showed less dye leakage were the negative control (38) followed the 28 group (single acessory cone associated with secundary cone + Sealer 26). The homogeneity o filling was best noted in the 1 A group (.single accessoty cone + Fill Canal). The groups that showed less dye penetration in the tranversal leakage (total area) were negative control (3B) and 2B

EFEITOS DOS MÉTODOS DE ABATE DE BOVINOS NA EFICIÊNCIA da SANGRIA

O objetivo do presente trabalho foi avaliar os efeitos dos métodos de abate de bovinos com insensibilização prévia através de marreta e pistola pneumática de penetração e sem insensibilização, realizada pelo método kasher, na eficiência da sangria. A eficiência da sangria foi avaliada pela determinação da hemoglobina no sangue e na carne. Foram utilizados 240 bovinos sãos, da raça Nelore, abatidos em matadouro-frigorífico sob Serviço de Inspeção Federal, sendo 60 animais abatidos pelo método judaico (kasher), 60 animais insensibilizados através de marreta, 60 animais insensibilizados através de pistola pneumática de penetração e 60 animais insensibilizados através de pistola pneumática de penetração seguida por estimulação elétrica. Foram colhidas amostras de sangue após a sangria dos animais e de carne, na porção torácica do músculo Longus colli, imediatamente após a chegada da carcaça à câmara frigorífica. Os animais abatidos pelo método kasher apresentaram menor teor de hemoglobina residual na carne e melhor eficiência da sangria. A utilização da estimulação elétrica imediatamente após a sangria dos animais atordoados por pistola pneumática, afetou negativamente a eficiência da sangria.

Dinâmica do peso e da condição corporal e eficiência reprodutiva de ovelhas da raça Santa Inês e mestiças Santa Inês-Suffolk submetidas a dois sistemas de alimentação em intervalos entre partos de 8 meses

O trabalho teve como objetivo comparar a eficiência produtiva e reprodutiva de ovelhas em dois sistemas de alimentação. Noventa e oito matrizes da raça Santa Inês e trinta e nove mestiças Suffolk (3/4 Suffolk + 1/4 Santa Inês) foram divididas em dois tratamentos: tratamento 1 (T1) - mantidas em pastagem, com suplementação de silagem de capim elefante na seca invernal, e tratamento 2 (T2) -mantidas em pastagem, com suplementação de silagem de capim elefante na seca invernal e de concentrado três semanas antes e durante a estação de monta, três semanas antes do parto e durante a lactação. Verificou-se diferença (P<0,05) entre peso inicial (PI) (52,5kg e 54,33kg), e peso final (PF) (53,38kg e 55,76kg) para T1 e T2, respectivamente. Houve efeito de genótipo (P<0,05), sendo PI 51,46 kg para a raça Santa Inês (SI) e 55,38kg para as mestiças Santa Inês-Suffolk (SF). Para PF, observou-se 52,36kg para a Santa Inês e 56,78kg na mestiça Santa Inês-Suffolk. O peso pré-parto (PPP) diferiu (P<0,05) apenas entre as estações, tendo sido de 65,23kg na estação reprodutiva I (2 a 4/2002), 58,15kg na estação reprodutiva II (10 a 12/2002) e 59,73kg na estação reprodutiva III (6 a 8/2003). No peso pós-parto (PPART), também ocorreram diferenças (P<0,05) entre a raça Santa Inês (53,59kg) e a mestiça Santa Inês-Suffolk (57,05kg); no peso aos 30 dias de lactação (P30d) a Santa Inês registrou 52,94kg e a mestiça Santa Inês-Suffolk 55,45kg. O peso aos 70 dias (P70d) de lactação foi para a Santa Inês de 50,83kg e de 53,22 kg para a mestiça Santa Inês-Suffolk; e o peso aos 100dias (P100d) de lactação foi de 51,55kg e de 53,61kg para a Santa Inês e para a mestiça Santa Inês-Suffolk, respectivamente. A condição corporal inicial (CCI) foi maior (P<0,05) para o T2 2,47 do que para o T1 2,16. Na condição corporal final (CCF), 2,19 e 2,6, respectivamente para T1 e T2, mas os tratamentos não diferiram na condição corporal pré-parto (CCPP). A CCI 2,4 para a mestiça Santa Inês-Suffolk foi (P<0,05) em relação a Santa Inês 2,22. A CCF da mestiça Santa Inês-Suffolk de 2,49 também foi maior (P<0,05) que da Santa Inês que obteve 2,3, mas não diferiram na CCPP. em relação as três estações reprodutivas, apenas na estação I a CCI 2,55, CCF 2,8 e a CCPP 3,03 foram maiores (P<0,05). Já as estações reprodutivas II= 2,47 e III= 2,1 diferiram somente na CCPP que foi menor na estação III. Na estação I e T1 ambos os genótipos obtiveram 72,5% de fertilidade e o T2 apresentou para as mestiças Santa Inês-Suffolk 77% e para a Santa Inês 88%. Na estação II o T1 obteve para as mestiças Santa Inês-Suffolk 42% e para as Santa Inês 38% e o T2 resultou em 56 e 50% para as mestiças Santa Inês-Suffolk e Santa Inês respectivamente. Na estação III a fertilidade do T1 foi para as mestiças 60% e para as Santa Inês 54% e o T2 87% e 76% para as mestiças e Santa Inês respectivamente. Encontrou-se diferença na prolificidade, entre os tratamentos, sendo na estação I a prolificidade foi de 1,20 e 1,55, na estação II foi 0,90 e 1,03 e na estação III obteve-se 1,11 e 1,14, respectivamente para o T1 e T2. Concluiu-se que a suplementação melhorou o desempenho reprodutivo das ovelhas.

Capacidade de absorção de nutrientes e eficiência nutricional do sorgo sacarino

Foi conduzido um experimento em casa de vegetação, utilizando dois cultivares de sorgo sacarino (Brandes e Rio), cultivados em soluções nutritivas completa e diluída. No final do ciclo as plantas foram colhidas, separadas em partes e foram analisadas N, P, K, Ca, Mg, S, Cu, Fe, Mn e Zn. de maneira geral os dois cultivares apresentaram capacidade de absorção de nutrientes semelhantes medida tanto em regime de fornecimento adequado como em soluções nutritivas diluídas, embora as produções de matéria seca total tenham sido diferentes na solução mais diluída. Com relação a produção de colmos verdes, o cultivar Brandes produziu mais em solução completa e menos em soluções diluídas do que o cultivar Rio, mas a produção de matéria seca de colmos do cultivar Rio, em casa de vegetação, sempre foi maior do que o do cultivar Brandes.

Composição corporal e eficiência de utilização de nutrientes por pacus alimentados com ração suplementada com cromo trivalente

O objetivo deste trabalho foi avaliar a composição corporal e a eficiência de utilização de nutrientes por pacus alimentados com dieta suplementada com cromo trivalente e mantidos em duas densidades de estocagem. O delineamento experimental foi inteiramente ao acaso com 24 tratamentos, em esquema fatorial: quatro níveis de cromo na ração (0, 6, 12, 18 mg kg-1), duas densidades de estocagem (4 e 20 kg m-3) e três períodos de avaliação (30, 60 e 90 dias) com quatro repetições. Foram observados aumentos significativos na eficiência de retenção de proteína bruta e na porcentagem de proteína bruta na carcaça, diminuição de eficiência de retenção de gordura e menores valores de porcentagem de gordura na carcaça dos pacus alimentados com ração suplementada. O nível de cromo de 6 mg kg-1 foi suficiente para possibilitar, na menor densidade, o maior acúmulo de proteína e menor teor de gordura na carcaça, ao passo que, na maior densidade, a exigência de cromo foi mais alta (12 mg kg-1), para obtenção de resultados semelhantes. Pacus alimentados com dietas suplementadas com cromo apresentaram carne mais magra, com menor teor de gordura, até 60 dias de experimento.

Eficiência de vestimentas hidrorrepelentes novas na proteção do tratorista em pulverizações de agrotóxicos em goiaba com o turbopulverizador

Os objetivos do trabalho foram: quantificar as exposições dérmicas e respiratórias potenciais proporcionadas ao tratorista em pulverizações de agrotóxicos, na cultura de goiaba, com o turbopulverizador; avaliar a eficiência de duas vestimentas de proteção individual; avaliar a segurança e classificar estas condições de trabalho em seguras ou inseguras para cada agrotóxico considerado. A exposição dérmica potencial proporcionada ao tratorista pela condição de trabalho foi de 3.807,3 mL de calda/7h. A eficiência do conjunto de proteção individual Agro Light foi de 96,7 %, e a do Azeredo, 96,2 %. A exposição dérmica potencial nas regiões do corpo mais expostas do tratorista à pulverização, em ordem decrescente, foram os pés, os braços, as coxas+pernas-frente e o tronco-atrás. A exposição dérmica não-controlada pelos conjuntos de proteção individual foi igualmente distribuída em todas as regiões do corpo do tratorista devido aos controles das exposições dérmicas que proporcionaram às regiões mais expostas do corpo. Foram classificadas como seguras as pulverizações de três dos 17 agrotóxicos considerados e sete com o uso das vestimentas de proteção individual. As demais foram classificadas como inseguras.