Laser therapy in pressure ulcers: evaluation by the Pressure Ulcer Scale for Healing and Nursing Outcomes Classification

AbstractOBJECTIVETo describe the pressure ulcer healing process in critically ill patients treated with conventional dressing therapy plus low-intensity laser therapy evaluated by the Pressure Ulcer Scale for Healing (PUSH) and the result of Wound Healing: Secondary Intention, according to the Nursing Outcomes Classification (NOC).METHODCase report study according to nursing process conducted with an Intensive Care Unit patient. Data were collected with an instrument containing the PUSH and the result of the NOC. In the analysis we used descriptive statistics, considering the scores obtained on the instrument.RESULTSA reduction in the size of lesions of 7cm to 1.5cm of length and 6cm to 1.1cm width, in addition to the increase of epithelial tissue and granulation, decreased secretion and odor.CONCLUSIONThere was improvement in the healing process of the lesion treated with adjuvant therapy and the use of NOC allowed a more detailed and accurate assessment than the PUSH.

The use of textbooks in Capeverdean secondary schools: The Relationship between Use, Evaluation and Adaptation of Textbooks

This study examines the relationship between teacher’s use of English textbooks and the way teachers evaluate and adapt them, looking at a particular context, the Capeverdean secondary schools, specifically in Praia. The referred relationship was analyzed through teachers’ responses about how they use, evaluate and adapt their textbooks. The results of the study revealed that, on the one hand, the way teachers use their textbooks influences the way they evaluate the same textbooks; on the other hand, the use of textbooks doesn’t necessarily influence the way teachers adapt them. Moreover, the findings revealed that, in general, due to some particular constraints the Capeverdean English teachers are using their textbooks as resources, in which several textbooks are used in combination with one another. Additionally, although teachers assume that they are doing their best, they still need more confidence concerning the way they use, evaluate and adapt available textbooks. Teachers’ confidence in the way they are using their textbooks can be reinforced by establishing an intensive teacher training module on materials evaluation and adaptation, taking into account that a textbook is one of the most important tools in the process of teaching and learning. I hope that the elements presented may lead to further studies on this matter, specifically regarding textbook evaluation and adaptation.

Evaluation qualitative de la compliance médicale [Qualitative evaluation of medical compliance].

OBJECTIVE: The effectiveness of CLP (Consultation and liaison psychiatry) interventions in a general hospital is difficult to evaluate; parameters potentially determinant as to effectiveness are numerous. Effectiveness evaluations are almost exclusively restricted to the duration of hospitalization. Since CLP may and often should be manifest beyond discharge, we intended to determine the agreement between our proposition and its execution as a measure of effectiveness. METHOD: We based our analyses principally on the general practitioner's appreciation of the CLP impact, a measure of effectiveness at distance from the consultation by a judge not directly involved in the consulting process. This qualitative assessment is based on a population of 50 patients. RESULTS: Our results suggest that agreement between our proposal and its complete execution is good concerning medication (90%) and referral rate after the hospitalization (85%), average as to liaison suggestions (65%) and clearly weak as to propositions regarding further investigations (< 30%). CONCLUSION: CLP proposals must be as close as possible to the in-patient physician's preoccupations to enhance the probability that they be executed. The concordance as to the proposal and its execution as well as the CLP impact estimation need be evaluated at distance. This evaluation must imply the general practitioner's assessment.

Evaluation of a topical cyclosporine A prodrug on corneal graft rejection in rats.

PURPOSE: To assess the efficacy of a topical cyclosporine A (CsA), water-soluble prodrug, for promoting the survival of allogenic rat corneal grafts after penetrating keratoplasty (PKP). METHODS: Corneas of Brown-Norway rats (donors) were transplanted to Lewis rats (recipients). Transplanted rats were divided in three treatment groups: group I (PBS) and group II (0.26% Debio088) received drops five times per day. Group III received a daily intramuscular CsA injection (10 mg/kg/day). Blood CsA concentrations were measured on days 2 and 14. On day 4, 10, 13 after PKP, grafts were scored for corneal transparency, edema and extent of neovascularization. An opacity score of greater than or equal to 3 was considered as a nonreversible graft rejection process. On day 14, the experimental eyes were processed for histology. RESULTS: On day 13, 12 of the 18 corneal transplants (67%) in group I showed irreversible graft rejection. Three of 18 transplants (19%) in group II and 5 of 16 transplants (28%) in group III showed irreversible graft rejection (p=0.013/p=0.019, OR=0.14/0.06 versus vehicle). Each mean clinical score for edema, opacity, and neovessels in group II were significantly lower than those of the grafts in group I (respectively p=0.010, p=0.013, p=0.024) and III except for neovessels (respectively p=0.002, p=0.001, p=0.057). Histology confirmed the clinical results. The mean CsA blood levels for groups II and III were, respectively 54+/-141 mug/l and 755+/-319 mug/l on day 2 and 14+/-34 mug/l and 1318+/-463 mug/l on day 14. CONCLUSIONS: Debio088 CsA prodrug drops given five times daily are as effective as intramuscular injection of 10 mg/kg/day for the prevention of acute corneal graft rejection in rats.

Long term global evaluation of a national AIDS prevention strategy: the case of Switzerland.

OBJECTIVES: The Swiss Aids prevention strategy has been subject to a continuous process of evaluation for the past 12 years. This paper describes the conceptual approach, methodology, results obtained and contribution to policy-making of that evaluation.¦DESIGN: The evaluation is on-going, global with respect to all components of the strategy, and utilization-focused. Each successive phase of the evaluation has included 10-20 studies centred either on aspects of process, of outcome or of environmental context. Findings are synthesized at the end of each phase. METHODS: Both quantitative and qualitative methods are used. Studies generally have one of three functions within the overall evaluation: assessment of trends through surveys or other types of repeated studies; evaluation of specific areas through a series of studies from different viewpoints; in-depth investigation or rapid assessment through one-off studies. Various methods of triangulation are used to validate findings. RESULTS: The evaluation has allowed for: the observation of behavioural change in different populations; the availability of scientific data in controversial fields such as drug-use policy; an understanding of the diversity of public appropriation of prevention messages. Recommendations are regularly formulated and have been used by policy-makers and field workers for strategy development. CONCLUSIONS: The global approach adopted corresponds well to the evaluation requirements of an integrated long-term prevention strategy. Cost is low relative to the extent of information provided. Such an evaluation cannot however address the question of causal relationship between the strategy and observed changes. The evaluation has contributed to the development of a culture of evaluation in Swiss AIDS prevention more generally.

Evaluation of Hot Mix Asphalt Moisture Sensitivity Using the Nottingham Asphalt Test Equipment, July 2005

Moisture sensitivity of Hot Mix Asphalt (HMA) mixtures, generally called stripping, is a major form of distress in asphalt concrete pavement. It is characterized by the loss of adhesive bond between the asphalt binder and the aggregate (a failure of the bonding of the binder to the aggregate) or by a softening of the cohesive bonds within the asphalt binder (a failure within the binder itself), both of which are due to the action of loading under traffic in the presence of moisture. The evaluation of HMA moisture sensitivity has been divided into two categories: visual inspection test and mechanical test. However, most of them have been developed in pre-Superpave mix design. This research was undertaken to develop a protocol for evaluating the moisture sensitivity potential of HMA mixtures using the Nottingham Asphalt Tester (NAT). The mechanisms of HMA moisture sensitivity were reviewed and the test protocols using the NAT were developed. Different types of blends as moisture-sensitive groups and non-moisture-sensitive groups were used to evaluate the potential of the proposed test. The test results were analyzed with three parameters based on performance character: the retained flow number depending on critical permanent deformation failure (RFNP), the retained flow number depending on cohesion failure (RFNC), and energy ratio (ER). Analysis based on energy ratio of elastic strain (EREE ) at flow number of cohesion failure (FNC) has higher potential to evaluate the HMA moisture sensitivity than other parameters. If the measurement error in data-acquisition process is removed, analyses based on RFNP and RFNC would also have high potential to evaluate the HMA moisture sensitivity. The vacuum pressure saturation used in AASHTO T 283 and proposed test has a risk to damage specimen before the load applying.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

New perspectives in the use of ink evidence in forensic science: Part III: Operational applications and evaluation

The research reported in this series of article aimed at (1) automating the search of questioned ink specimens in ink reference collections and (2) at evaluating the strength of ink evidence in a transparent and balanced manner. These aims require that ink samples are analysed in an accurate and reproducible way and that they are compared in an objective and automated way. This latter requirement is due to the large number of comparisons that are necessary in both scenarios. A research programme was designed to (a) develop a standard methodology for analysing ink samples in a reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in forensic contexts. This report focuses on the last of the three stages of the research programme. The calibration and acquisition process and the mathematical comparison algorithms were described in previous papers [C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part I: Development of a quality assurance process for forensic ink analysis by HPTLC, Forensic Sci. Int. 185 (2009) 29-37; C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science- Part II: Development and testing of mathematical algorithms for the automatic comparison of ink samples analysed by HPTLC, Forensic Sci. Int. 185 (2009) 38-50]. In this paper, the benefits and challenges of the proposed concepts are tested in two forensic contexts: (1) ink identification and (2) ink evidential value assessment. The results show that different algorithms are better suited for different tasks. This research shows that it is possible to build digital ink libraries using the most commonly used ink analytical technique, i.e. high-performance thin layer chromatography, despite its reputation of lacking reproducibility. More importantly, it is possible to assign evidential value to ink evidence in a transparent way using a probabilistic model. It is therefore possible to move away from the traditional subjective approach, which is entirely based on experts' opinion, and which is usually not very informative. While there is room for the improvement, this report demonstrates the significant gains obtained over the traditional subjective approach for the search of ink specimens in ink databases, and the interpretation of their evidential value.

Evaluation of ammonia volatilization losses by adjusted parameters of a logistic function

The dynamics of N losses in fertilizer by ammonia volatilization is affected by several factors, making investigation of these dynamics more complex. Moreover, some features of the behavior of the variable can lead to deviation from normal distribution, making the main commonly adopted statistical strategies inadequate for data analysis. Thus, the purpose of this study was to evaluate the patterns of cumulative N losses from urea through ammonia volatilization in order to find a more adequate and detailed way of assessing the behavior of the variable. For that reason, changes in patterns of ammonia volatilization losses as a result of applying different combinations of two soil classes [Planossolo and Chernossolo (Typic Albaqualf and Vertic Argiaquolls)] and different rates of urea (50, 100 and 150 kg ha-1 N), in the presence or absence of a urease inhibitor, were evaluated, adopting a 2 × 3 × 2 factorial design with four replications. Univariate and multivariate analysis of variance were performed using the adjusted parameter values of a logistic function as a response variable. The results obtained from multivariate analysis indicated a prominent effect of the soil class factor on the set of parameters, indicating greater relevance of soil adsorption potential on ammonia volatilization losses. Univariate analysis showed that the parameters related to total N losses and rate of volatilization were more affected by soil class and the rate of urea applied. The urease inhibitor affected only the rate and inflection point parameters, decreasing the rate of losses and delaying the beginning of the process, but had no effect on total ammonia losses. Patterns of ammonia volatilization losses provide details on behavior of the variable, details which can be used to develop and adopt more accurate techniques for more efficient use of urea.

Evaluation des pratiques d'irrigation, de fertilisation et d'application de pesticides dans l'agriculture périurbaine de Dakar, Sénégal

RESUMEL'agriculture urbaine et périurbalne - nommée ci-après AU - est un thème fort de recherche transversale, au vu des nombreux enjeux économiques, sociaux et environnementaux. L'objectif de cette recherche était de contribuer à une meilleure connaissance des processus de transfert de polluants et du cycle des nutriments à l'échelle locale, afin de déterminer sous quelles conditions l'AU de Dakar peut être pratiquée sans porter atteinte à la santé et à l'environnement.Une approche basée sur l'étude des processus géochimiques dans ie sol jusqu'à la nappe a été choisie, à l'échelle de la parcelle cultivée et à une échelle un peu plus large de la zone périurbaine de Dakar pour déterminer les influences du type d'occupation du sol.L'évaluation des impacts de l'irrigation avec des eaux usées brutes et des eaux de nappe saumâtres sur la qualité des sols (chapitre 2) a montré que l'alcalinité et les teneurs en calcium élevées des eaux saumâtres induisent la précipitation de CaC03 dans l'horizon superficiel du sol. Na remplace consécutivement Ca sur le complexe argilo-humique du sol et les bicarbonates diminuent dans la solution du sol. Le carbone organique dissout (COD) augmente significativement dans la solution du sol et dans la nappe sous-jacente. Malgré l'alcalinité et les teneurs très élevées en calcium des eaux usées, il y a peu de précipitation de CaC03 dans l'horizon superficiel du sol et une faible augmentation du sodium échangeable ESP. La nitrification de l'ammonium des eaux usées (moy 190mg/L à Pikine) produit des protons, qui ne sont plus tamponnés par les bicarbonates exportés hors du profil. Il y a alors une nette baisse de pH des sols irrigués par des eaux usées non traitées. Les sols irrigués par des eaux usées et saumâtres stockent moins de C et Ν que les sols de référence.L'évaluation de l'influence de l'occupation des sols en zone périurbaine sur à la nappe phréatique peu profonde (chapitre 3) a permis de déterminer les traceurs représentatifs de l'occupation du sol, à savoir Br/CI, NO3/CI et δ180-Ν03 pour l'irrigation par des eaux usées, pH et δ15Ν-Ν03 pour l'irrigation par des eaux de nappe, et Rb+Cr et Κ pour les lixiviats de fosses septiques. Ce chapitre a mis en évidence des points importants de la dynamique de l'azote en zone périurbaine sous deux occupations du sol : (1) la dénitrification est un processus important dans l'agrosystème périurbain de Dakar en bas de dune, dans les gleysols où l'on trouve des conditions temporairement réduites et un substrat organique favorables aux microorganismes de la dénitrification. Les teneurs en nitrates sont presque nulles avec irrigation d'eau de nappe. (2) en bas de pente, mais avec irrigation quotidienne par les eaux usées, l'apport continu d'ammonium inhibe probablement la dénitrification, mais favorise la volatilisation. (3) la nitrification de l'ammonium dans la nappe lors de la lixiviation des fosses septiques se distingue de la nitrification de l'ammonium dans la zone non saturée dans la zone d'agriculture périurbaine par la composition isotopique de l'oxygène de l'eau. Une comparaison des flux d'azote entre l'agrosystème et les quartiers périurbains de Dakar (chapitre 4) ont révélé que ces derniers étaient du même ordre de grandeur par unité de surface, à savoir 2-4 tonnes Ν /ha/an.L'évaluation des flux de pesticides dans l'agrosystème et des risques induits pour les eaux souterraines (chapitre 5) a révélé un fiux total de pesticides de 60kg/ha/an, totalisant 15 matières actives. Seules deux de ces matières actives sont autorisées par le comité des pesticides sahélien. Les pesticides les plus utilisés par les producteurs sont l'organochloré dicofol, les organophosphorés methamidophos, dimethoate et fenithrotion ainsi que le cabamate methomyl. Les flux les plus importants sont de 9 à 7 kg/ha/an (methomyl, methamidophos, ethoprophos et dicofol). Les pesticides qui présentent un risque élevé de contamination des eaux souterraines et qui devraient être prioritaires pour un suivi analytique sont : le carbofuran, le dimethoate, l'ethoprophos et le methomyl.En conclusion, une meilleure gestion de la fertilisation est nécessaire dans la zone d'AU de Dakar, afin de (1) réduire les pertes gazeuses qui contribuent à l'effet de serre, (2) de ralentir la minéralisation du carbone et de l'azote organiques pour créer un stock de C et Ν dans ces sols, (3) de limiter le lessivage dans la nappe et enfin, 4) d'augmenter l'efficacité d'utilisation de Ν par les plantes. Une optimisation de l'irrigation devrait limiter l'alcalinisation secondaire. Enfin, la mise en place d'une lutte intégrée ou biologique contre les ravageurs est indispensable afin de minimiser les risques pour les eaux souterraines et les mares permanentes.ABSTRACTUrban and periurban agriculture (UA) is an important issue in southern countries, because of its key role in their social and economical development and its environmental concern. The goal of this study was to contribute to a better understanding of pollutant transfer and nutrient cycling at the local scale, in order to implement the necessary improvements to guarantee the sustainability of this practice.An approach based on geochemical processes occurring in the vadose zone from the surface down to the groundwater level was chosen, at the scale of cultivated plots and at the regional scale of Dakar periurban areas, to determine the influence of land use.The assessment of irrigation with untreated domestic wastewater and brackish water on soil quality (chapter 2) showed: (1) that the high alkalinity and calcium contents of brackish water induce CaC03 precipitation in the top layer of the soil and therefore a replacement of Ca by Na on the clay- humic complexes, strongly marked during the dry season. Dissolved organic carbon (DOC) increased significantly in the soil solution and in the underlying groundwater. (2) in spite of the similarly high alkalinity and Ca contents of waste water, there is only little CaC03 precipitation and a low increase of the percentage of exchangeable sodium (ESP) in the soil top layer. The nitrification of the ammonium of wastewater (mean 190 mg/L in Pikine) produces protons, which are not any more buffered by bicarbonates exported out of the soil profile, which leads to a net decline of soil pH. Both soils irrigated with untreated wastewater and brackish water store less of C and Ν than soils irrigated with non saline groundwater.The assessment of the impact of land use on the shallow groundwater (chapter 3) allowed determining representative tracers of the land use. Low Br/CI ratio, high NO3/CI ratio and low δ1βΟ- nitrate indicated the influence of wastewater; high pH and high 515N-nitrates indicated the influence of brackish water together with high amendments of organic fertilizers; high Rb+Cr and Κ indicated the influence of poor sanitation facilities in periurban districts (septic tank leakage). This chapter also pointed out the following facts about the nitrogen dynamics : (1) denitrification is a key-process in the Dakar UA agrosystem in the gleysols irrigated with groundwater. The underlying groundwater is almost nitrate free. (2) in the Gleysols irrigated with waste water, ammonium inhibits denitrification but facilitate ammoniac volatilization. A comparison of nitrogen balance between the UA agrosystem and the periurban districts of Dakar (chapter 4) revealed similar flows per surface unit, namely 2-4 tons Ν / ha / year.The evaluation of pesticides use in the UA agrosystem and the risk assessment for the groundwater (chapter 5) revealed a total flow of pesticides of 60kg / ha / year, totalizing 15 active substances. Only two of these are authorized by the Sahelian Pesticides Committee. The most used pesticides are dicofol (organochlorinated), methamidophos, dimethoate and fenithrotion (organophosphate) as well as methomyl. (carbamate). The most important flows vary between 9 to 7 kg / ha / year. Pesticides with a high risk of groundwater contamination - according to SIRIS and EPRIP 2 indicators - are: carbofuran, dimethoate, ethoprophos and methomyl. These substances should be established as a priority for an analytical follow-up in the different environmental compartments.In conclusion, a better management of the fertilization is necessary in the Dakar UA, (1) to reduce the gaseous losses which contribute to greenhouse emissions (2) to slow down the mineralization of the organic carbon and the nitrogen, in order to enhance the C and Ν stock in these soils, (3) to limit the nitrate leaching in the groundwater and finally, 4) to increase the N-use efficiency of plants. An optimization of the irrigation scheme should limit the secondary sodisation if coupled with an increase the stable organic matter of the soil. An integrated or biologic crop pest strategy is urgently needed to minimize risks with respect to ground and surface water (ponds used for fishing).RESUME LARGE PUBLICL'agriculture mondiale connaît actuellement une crise majeure, affectée par les changements climatiques, la sécurité alimentaire et les dégradations de l'environnement. Elle n'a plus le rôle unique de produire, mais devient un élément essentiel de la protection des ressources naturelles et du paysage. Les politiques agricoles basées sur les marchés mondiaux devront se réorienter vers une agriculture locale basée sur le développement durable.La production alimentaire située dans l'enceinte des villes, nommée agriculture urbaine ou périurbaine (AU ci-après) joue un rôle important dans le contexte actuel d'accroissement de la population et de la pauvreté urbaines. L'AU concerne en effet la majorité des mégapoies du monde, fait vivre plus de 200 millions de personnes dans les pays du Sud, fournit jusqu'à 80% de la demande urbaine en certains produits frais, fait barrière à l'extension urbaine et permet un recyclage de certains déchets urbains. L'AU a pour particularité d'être à cheval entre des politiques rurales et urbaines, d'où un délaissement ce cette activité au secteur informel. Ce qui a développé de nombreuses stratégies à risques, comme à Dakar, où les petits producteurs périurbains irriguent quotidiennement avec des eaux usées domestiques par manque d'accès à une eau de bonne qualité et pour raccourcir les cycles de production. L'extrême précarité foncière des acteurs de l'AU de Dakar les empêchent d'investir à long terme et induit des pratiques inadéquates d'irrigation, d'usage de pesticides et de fertilisation de ces sols sableux.L'objectif de cette recherche était de contribuer à une meilleure connaissance des processus de transfert de polluants et du cycle des nutriments à l'échelle des parcelles cultivées par des eaux usées et des eaux saumâtres, afin de déterminer sous quelles conditions l'AU de Dakar peut être pratiquée et surtout maintenue sans porter atteinte à la santé et à l'environnement. Pour cela, une approche basée sur l'étude des processus géochimiques dans le sol jusqu'à la nappe a été choisie, à l'échelle de la parcelle cultivée et à une échelle un peu plus large de la zone périurbaine de Dakar pour déterminer les influences du type d'occupation du sol.Les résultats principaux de cette étude ont montré que (1) il y a un processus de salinisation anthropique des sols (sodisation) lors d'irrigation avec des eaux de nappe saumâtres, un processus accentué en saison sèche et lors d'années à pluviométrie déficitaire. Bien que les eaux usées soient aussi salines que les eaux de nappe, la salinisation des sols irrigués' par des eaux usées est limitée par l'ammonium présent dans les eaux usées (moy 190mg NH4/L à Pikine) qui produit de l'acidité lors de la transformation en nitrates dans le sol (nitrification). (2) les sols irrigués par des eaux usées (EU) stockent moins de C et Ν que les sois de référence, ce qui montrent bien que l'azote des eaux usées n'est pas disponible pour les plantes, mais est lessivé dans la nappe (100 à 450 mg/L N03 sous irrigation par EU, alors que la limite de OMS est de 50mg/L). (3) l'utilisation des isotopes stables des nitrates et des éléments traces, notamment le bore et le brome, ont permis de distinguer l'influence de l'irrigation par des eaux usées, de l'irrigation par des eaux de nappe et des lixiviats de fosses septiques sur les propriétés de la nappe. (4) Le processus de la dénitrification (atténuation naturelle des concentrations en nitrates de la nappe par biotransformation en azote gazeux) est important dans les zones basses de l'agrosystème périurbain de Dakar, sous irrigation par eaux naturelles (ΝΟ3 < 50mg/L). Tandis que sous habitat sans assainissement adéquat, les nitrates atteignent 300 à 700 mg/L. (5) Le flux total de pesticides dans l'AU est énorme (60kg/ha/an) totalisant 15 pesticides, dont deux seulement sont autorisés. Les pesticides les plus utilisés sont des insecticides organophosphorés et organochlorés classés extrêmement dangereux à dangereux par l'OMS, appliqués à des doses de 2 à 9 kg/ha/an. Les pesticides qui ont montré un risque élevé de contamination des eaux souterraines avec les indicateurs SIRIS et EPRIP2 sont : le carbofuran, le dimethoate, l'ethoprophos et le methomyl.En conclusion, nous recommandons la reconstitution d'un horizon superficiel des sols riche en matière organique stable et structuré par production locale de compost. Cette mesure réduira les pertes gazeuses contribuant à l'effet de serre, augmentera le stock de Ν dans ces sols, alors utilisable par les plantes et permettra de diminuer l'irrigation car la capacité de rétention de l'eau dans le sol sera accru, ce qui limitera le lessivage des nitrates dans la nappe et l'alcalinisation secondaire. Enfin, la mise en place d'une lutte intégrée ou biologique contre les ravageurs est indispensable afin de minimiser les risques pour les eaux souterraines et lesmares permanentes.

HR-243 Production and Evaluation of Calcium Magnesium Acetate, Febrauray 19, 2001

Calcium magnesium acetate (CMA) has been identified by Bjorksten Research Laboratories as an environmentally harmless alternative to sodium or calcium chloride for deicing highways. Their study found CMA to be noncorrosive to steel, aluminum and zinc with little or no anticipated environmental impact. When used, it degrades into elements found in abundance in nature. The deicing capabilities were found to be similar to sodium chloride. The neutralized CMA they produced did cause scaling of PC concrete, but they did not expect mildly alkaline CMA to have this effect. In the initial investigation of CMA at the Iowa DOT laboratory, it was found that CMA produced from hydrated lime and acetic acid was a light, fluffy material. It was recognized that a deicer in this form would be difficult to effectively distribute on highways without considerable wind loss. A process was developed to produce CMA in the presence of sand to increase particle weight. In this report the product of this process, which consists of sand particles coated with CMA, is referred to as "CMA deicer". The mixture of salts, calcium magnesium acetate, is referred to as "CMA". The major problems with CMA for deicing are: (1) it is not commercially available, (2) it is expensive with present production methods and (3) there is very little known about how it performs on highways under actual deicing conditions. In view of the potential benefits this material offers, it is highly desirable to find solutions or answers to these problems. This study provides information to advance that effort.

Hwyneeds: Methodology, Analysis and Evaluation, March 2001

The quadrennial need study was developed to assist in identifying county highway financial needs (construction, rehabilitation, maintenance, and administration) and in the distribution of the road use tax fund (RUTF) among the counties in the state. During the period since the need study was first conducted using HWYNEEDS software, between 1982 and 1998, there have been large fluctuations in the level of funds distributed to individual counties. A recent study performed by Jim Cable (HR-363, 1993), found that one of the major factors affecting the volatility in the level of fluctuations is the quality of the pavement condition data collected and the accuracy of these data. In 1998, the Center for Transportation Research and Education researchers (Maze and Smadi) completed a project to study the feasibility of using automated pavement condition data collected for the Iowa Pavement Management Program (IPMP) for the paved county roads to be used in the HWYNEEDS software (TR-418). The automated condition data are objective and also more current since they are collected in a two year cycle compared to the 10-year cycle used by HWYNEEDS right now. The study proved the use of the automated condition data in HWYNEEDS would be feasible and beneficial in educing fluctuations when applied to a pilot study area. In another recommendation from TR-418, the researchers recommended a full analysis and investigation of HWYNEEDS methodology and parameters (for more information on the project, please review the TR-418 project report). The study reported in this document builds on the previous study on using the automated condition data in HWYNEEDS and covers the analysis and investigation of the HWYNEEDS computer program methodology and parameters. The underlying hypothesis for this study is thatalong with the IPMP automated condition data, some changes need to be made to HWYNEEDS parameters to accommodate the use of the new data, which will stabilize the process of allocating resources and reduce fluctuations from one quadrennial need study to another. Another objective of this research is to investigate the gravel roads needs and study the feasibility of developing a more objective approach to determining needs on the counties gravel road network. This study identifies new procedures by which the HWYNEEDS computer program is used to conduct the quadrennial needs study on paved roads. Also, a new procedure will be developed to determine gravel roads needs outside of the HWYNEED program. Recommendations are identified for the new procedures and also in terms of making changes to the current quadrennial need study. Future research areas are also identified.

Evaluation of the RapidAir 457 Air Void Analyzer, March 2012

An adequate air void system is imperative to produce concrete with freeze-thaw durability in a wet freeze environment such as found in Iowa. Specifications rely on a percentage of air obtained in the plastic state by the pressure meter. Actual, in place air contents, of some concrete pavements in Iowa, have been found with reduced air content due to a number of factors such as excessive vibration and inadequate mixing. Determining hardened air void parameters is a time consuming process involving potential for human error. The RapidAir 457 air void analyzer is an automated device used to determine hardened air void parameters. The device is used in Europe and has been shown to quickly produce accurate and repeatable hardened air results. This research investigates how well the RapidAir 457 results correlate to plastic air content and the image analysis air technique. The repeatability and operator variation were also investigated, as well as, the impact of aggregate porosity and selection of threshold value on hardened air results.

Laboratory Performance Evaluation of CIR-Emulsion and it Comparison Against CIR-Form Test Result from Phase II, Final Report TR-578 Phase III, December 2009

Currently, no standard mix design procedure is available for CIR-emulsion in Iowa. The CIR-foam mix design process developed during the previous phase is applied for CIR-emulsion mixtures with varying emulsified asphalt contents. Dynamic modulus test, dynamic creep test, static creep test and raveling test were conducted to evaluate the short- and long-term performance of CIR-emulsion mixtures at various testing temperatures and loading conditions. A potential benefit of this research is a better understanding of CIR-emulsion material properties in comparison with those of CIR-foam material that would allow for the selection of the most appropriate CIR technology and the type and amount of the optimum stabilization material. Dynamic modulus, flow number and flow time of CIR-emulsion mixtures using CSS-h were generally higher than those of HFMS-2p. Flow number and flow time of CIR-emulsion using RAP materials from Story County was higher than those from Clayton County. Flow number and flow time of CIR-emulsion with 0.5% emulsified asphalt was higher than CIR-emulsion with 1.0% or 1.5%. Raveling loss of CIR-emulsion with 1.5% emulsified was significantly less than those with 0.5% and 1.0%. Test results in terms of dynamic modulus, flow number, flow time and raveling loss of CIR-foam mixtures are generally better than those of CIR-emulsion mixtures. Given the limited RAP sources used for this study, it is recommended that the CIR-emulsion mix design procedure should be validated against several RAP sources and emulsion types.

Outpatient Quick Diagnosis Units for the evaluation of suspected severe diseases: an observational, descriptive study

Background: Hospitals in countries with public health systems have recently adopted organizational changes to improve efficiency and resource allocation, and reducing inappropriate hospitalizations has been established as an important goal. AIMS: Our goal was to describe the functioning of a Quick Diagnosis Unit in a Spanish public university hospital after evaluating 1,000 consecutive patients. We also aimed to ascertain the degree of satisfaction among Quick Diagnosis Unit patients and the costs of the model compared to conventional hospitalization practices. DESIGN: Observational, descriptive study. METHODS: Our sample comprised 1,000 patients evaluated between November 2008 and January 2010 in the Quick Diagnosis Unit of a tertiary university public hospital in Barcelona. Included patients were those who had potentially severe diseases and would normally require hospital admission for diagnosis but whose general condition allowed outpatient treatment. We analyzed several variables, including time to diagnosis, final diagnoses and hospitalizations avoided, and we also investigated the mean cost (as compared to conventional hospitalization) and the patients' satisfaction. RESULTS: In 88% of cases, the reasons for consultation were anemia, anorexia-cachexia syndrome, febrile syndrome, adenopathies, abdominal pain, chronic diarrhea and lung abnormalities. The most frequent diagnoses were cancer (18.8%; mainly colon cancer and lymphoma) and Iron-deficiency anemia (18%). The mean time to diagnosis was 9.2 days (range 1 to 19 days). An estimated 12.5 admissions/day in a one-year period (in the internal medicine department) were avoided. In a subgroup analysis, the mean cost per process (admission-discharge) for a conventional hospitalization was 3,416.13 Euros, while it was 735.65 Euros in the Quick Diagnosis Unit. Patients expressed a high degree of satisfaction with Quick Diagnosis Unit care. CONCLUSIONS: Quick Diagnosis Units represent a useful and cost-saving model for the diagnostic study of patients with potentially severe diseases. Future randomized study designs involving comparisons between controls and intervention groups would help elucidate the usefulness of Quick Diagnosis Units as an alternative to conventional hospitalization.