Liquid-liquid slug flow: Hydrodynamics and pressure drop

In this paper, the hydrodynamics and the pressure drop of liquid-liquid slug flow in round microcapillaries are presented. Two liquid-liquid flow systems are considered, viz. water-toluene and ethylene glycol/water-toluene. The slug lengths of the alternating continuous and dispersed phases were measured as a function of the slug velocity (0.03-0.5 m/s), the organic-to-aqueous flow ratio (0.1-4.0), and the microcapillary internal diameter (248 and 498 mu m). The pressure drop is modeled as the sum of two contributions: the frictional and the interface pressure drop. Two models are presented, viz, the stagnant film model and the moving film model. Both models account for the presence of a thin liquid film between the dispersed phase slug and the capillary wall. It is found that the film velocity is of negligible influence on the pressure drop. Therefore, the stagnant film model is adequate to accurately predict the liquid-liquid slug flow pressure drop. The influence of inertia and the consequent change of the slug cap curvature are accounted for by modifying Bretherton's curvature parameter in the interface pressure drop equation. The stagnant film model is in good agreement with experimental data with a mean relative error of less than 7%.

Political Violence and Child Adjustment: Longitudinal Tests of Sectarian Antisocial Behavior, Family Conflict, and Insecurity as Explanatory Pathways

Understanding the impact of political violence on child maladjustment is a matter of international concern. Recent research has advanced a social ecological explanation for relations between political violence and child adjustment. However, conclusions are qualified by the lack of longitudinal tests. Toward examining pathways longitudinally, mothers and their adolescents (M = 12.33, SD = 1.78, at Time 1) from 2-parent families in Catholic and Protestant working class neighborhoods in Belfast, Northern Ireland, completed measures assessing multiple levels of a social ecological model. Utilizing autoregressive controls, a 3-wave longitudinal model test (T1, n = 299; T2, n = 248; T3, n = 197) supported a specific pathway linking sectarian community violence, family conflict, childrens insecurity about family relationships, and adjustment problems.

Study of fibre distribution and orientations in UHPFRC by electrical resistivity and mechanical tests

This paper presents experimental tests carried out on steel fibre reinforced concrete samples, including mechanical tests as well as non-destructive technique (electrical resistivity) and non destructive technique on cores (X-ray). Electrical resistivity measurements are done as a blind test, to characterise the electrical anisotropy and deduce the distribution and the orientation of fibres. These results are compared to X-ray imaging to check the quality of the non destructive evaluation. Then, flexural and compressive strength are measured on specimens to assess the influence of fibre distribution on the concrete properties.

Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - part I: Tests and finite element analysis

The results of 82 web crippling tests are presented, with 20 tests conducted on channel sections without web openings and 62 tests conducted on channel sections with web openings. The tests consider both end-two-flange and interior-two-flange loading conditions. In the case of the tests with web openings, the hole was located directly under the concentrated load. The concentrated load was applied through bearing plates; the effect of different bearing lengths is investigated. In addition, the cases of both flanges fastened and unfastened to the support is considered. A non-linear elasto-plastic finite element model is described, and the results compared against the laboratory test results; a good agreement was obtained in terms of both strength and failure modes.

Antimicrobic susceptibility and plasmid profile analysis as identity tests for multiple blood isolates of coagulase-negative staphylococci

We compared a disk diffusion antimicrobic susceptibility panel with plasmid DNA profiles as tests for identity of 106 isolates of coagulase-negative staphylococci cultured from the blood of 45 patients on multiple occasions. The antimicrobic panel included penicillin, oxacillin, clindamycin, trimethoprim-sulfamethoxazole, chloramphenicol, tetracycline, tobramycin, kanamycin, and gentamicin. Nineteen patterns of antimicrobic susceptibility were found. The most common pattern was present in 25% of the isolates, and at least one isolate from 31% of the patients had this pattern. Forty-seven distinct plasmid DNA profiles were found. The most common plasmid profile was present in 8.5% of the isolates, and at least one isolate from 15% of the patients had this profile. Twenty-eight patients had multiple isolates that were identical by plasmid profile analysis. Twenty-seven (96%) of these patients had isolates that were also identical by antimicrobic susceptibility. Nineteen patients had multiple isolates that were different by plasmid profile analysis. In 18 (95%) of these patients, the isolates were also different by antimicrobic susceptibility. Although plasmid DNA profile analysis is a more discriminating tool, these data confirm that a selected disk diffusion antimicrobic susceptibility panel may be used to screen multiple blood isolates of coagulase-negative staphylococci for identity or differences.