The immune system is limited by oxidative stress: dietary selenium promotes optimal antioxidative status and greatest immune defense in pacu Piaractus mesopotamicus

Reactive oxygen species (ROS) are reactive molecules containing oxygen, that form as byproducts of aerobic metabolism, including immune system processes. Too much ROS may cause oxidative stress. In this study, we examined whether it can also limit the production of immune system compounds. To assess the relationship between antioxidant status and immunity we evaluated the effect of dietary supplementation with organic selenium, given at various levels for 10 days, on the antioxidant and immune system of the pacu fish (Piaractus mesopotamicus). Fish fed a diet containing 0.6 mg Se-yeast kg(-1) showed significant improvement in antioxidant status, as well as in hematological and immunological profiles. Specifically, they had the highest counts for catalase (CAT), glutathione peroxidase (GPx), glutathione S-transferase (GST), red blood cells, and thrombocytes; the highest leukocyte count (particularly for monocytes); and the highest serum lysozyme activity. There was also a positive correlation between GPx and lysozyme in this group of fish. These findings indicate that short-term supplementation with 0.6 mg Se-yeast kg(-1) reestablished the antioxidative status, allowing the production of innate components which can boost immunity without the risk of oxidative stress. This study shows a relationship between oxidative stress and immunity, and, from a practical perspective, shows that improving immunity and health in pacu through the administration of selenium could improve their growth performance.

Median lethal concentration of formaldehyde and its genotoxic potential in bullfrog tadpoles (Lithobates catesbeianus)

In order to avoid that contaminated frog farms animals escaping in the environment and become potential vector of emergent diseases, studies with disinfection protocol are strictly necessary. The formaldehyde is one of the compounds tested in fungal disinfection protocols and also used in aquaculture. This study aimed to determine the median lethal concentration (LC50-96h) of formaldehyde in bullfrog tadpoles and to evaluate the possible genotoxic effects in acute exposition. Accordingly, the animals were exposed to formaldehyde in the concentrations of 6, 9, 12, 15, and 18 mg L(-1), and after 96 h blood samples were drawn for the micronucleus (MN) test. The LC50-96h was 10.53 mg L(-1), and the MN frequency increased in proportion to the formaldehyde concentrations, with an estimated frequency in the negative control being 1.35 MN/individual. We concluded that formaldehyde is genotoxic to tadpoles of bullfrogs in the tested concentrations, and the choice of this chemical should be contemplated before its use in animals in captivity.

Efeito dos lasers de Nd:YAG e de Er:YAG na adaptação das obturações de canais radiculares: análise do selamento marginal apical

Pós-graduação em Odontologia Restauradora - ICT

Efeito da clorexidina na cicatrização umbilical de avestruzes

The contamination of the umbilical region of newly hatched ostriches is one of the major problems in the bird production. This work aimed to evaluate the umbilical healing of ostriches (Struthio camelus) through the use of chlorhexidine as antiseptic associated to the total or partial umbilical cord cut off. It was used 168 newly hatched ostriches of which the umbilical cords were either sectioned totally or 0.5 cm above their insertion. The umbilical region antisepsis consisted of topical administration of an aqueous or alcoholic solution of chlorhexidine, 0.5, 1.0 or 2.0% during three days. A group of non-treated animals was added also. The umbilical healing was evaluated in the ostriches at 14 and 28 days of age. Results showed that all the chlorhexidine solutions reduced the risk of omphalitis, being the alcoholic solution 2% the most efficient. Umbilical healing was faster in animals in which the umbilical cord was totally cut off. It can be concluded that the use of chlorhexidine as antiseptic for newly hatched ostriches is safe and favors the umbilical healing. Moreover, for a better effectiveness it is necessary to remove the umbilical cord in its insertion

Molhabilidade de material reembasador: efeito dos agentes químicos de limpeza

Risk of mechanical injuries contraindicate brushing and elect chemical agents as appropriate for daily cleaning of dentures relined with resilient materials. It was evaluated the effect of denture cleansers on the wettability of denture relining material (Dentusoft, Dental Medrano). We used 20 discs of acrylic resin thermoactivated VipiCril ® with 30mm diameter and 4mm thick, covered by 2mm Dentusoft ®. Divided into 4grupos were stored in artificial saliva at 37 +1 º C for 30 days, immersed daily for 15minutes in distilled water (GI), Corega ® Tabs (GII), a solution of sodium bicarbonate (GIII) or solution of sodium hypochlorite (GIV) after which, on the soft liner were poured 2 ml of type IV gypsum (Durone IV, Dentsply). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to analysis, showed non-normal distribution, opting for non-parametric test. Kruskal Wallis test performed at 5% significance, there was statistical difference between the groups with lower average contact angle for GII. It was concluded that the chemical cleaning Corega Tabs ® allowed a better adaptation of relining the gypsum studied.

Compatibilidade entre alginato e gesso ortodônticos: capacidade de umedecimento sob influência da desinfecção do molde

The dental trade has offered dental impression and dental stone for orthodontic use ensuring accurate models. The compatibility between these materials is defined by the wetting of the model surfaces by the mixture water/stone poured over it and the influenced by the method of disinfection of model and disinfectant solution used. It was evaluated the influence of spray disinfection with sodium hypochlorite 1% on the wettability of two commercial alginate (Jeltrate ® - Dentsply and Orthoprint ® - Zhermack) at two commercial type III gypsum (Rio ® - ME and AOBussoli Orthogesso Orthogesso ®-SA). Twenty models were fabricated for each type of alginate, which were divided into two groups (water and sodium hypochlorite), receiving respectively water and sodium hypochlorite 1% spray. Each group of models was then further divided into two subgroups, and on their surface were poured 2 ml of type III gypsum (Gesso Rio® or Orthogesso®). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to ANOVA and founded statistical significance for solutions used. It was concluded that sodium hypochlorite spray improved wettability of alginates studied.

Efeito da desinfecção e do tempo de armazenagem na molhabilidade de moldes de alginato

The cares at the manipulation of the alginate (condensation, disinfection of the impression and the time elapsed until the leak of the plaster) deserve special attention considering the great amount of distortions occurring every time the impression is not fill of plaster in a brief space of time and appropriate storage conditions. Besides its adaptation to the plaster suffers influence of the events happened after the impression is removed of the mouth. The purpose of this research was to evaluate the wetting capacity of three brands of alginate (Jeltrate™,Hydrogum™ e Orthoprint™) by the plaster type III (Rio™) under the influence of disinfection by sodium hypochlorite 1% sprays and the time of storage of 15 minutes,30 minutes, 1 hour, 6, 12 and 24 hours. There were made 60 impressions of each brand of alginate divided in two groups (water and sodium hypochlorite 1%) rearranged after the application of the sodium hypochlorite spray according to the storage time (15 or 30 minutes and 1,6,12, or 24 hours). On the surface of the impressions 2ml of plaster were flowed, proportioned and condensed in agreement with manufacturer‘s instructions. After the final setting expansion the casts were sectioned vertically and medially, regularized at the cut surface (emery paper 400) and setted for reading the contact angle at the microscope Carl Zeiss. The obtained results, submitted to statistical treatment (ANOVA) revealed significant differences when compared the employed solutions (water and sodium hypochlorite 1%) and the time of storage. The sodium hypochlorite 1% exhibited the smallest contact angles and the times of storage of 15 minutes and 6 hours the smallest and larger angles, respectively. It can be concluded that the alginate impressions exhibited larger adaptation to the plaster when disinfected by hypochlorite of sodium 1% and stocked by 15 minutes.

Effect of polymerization techniques and cleaning solution on flexural resistance of acrylic resin chemically activated

The purpose of this study was to evaluate the impact of different disinfection solutions on flexural resistance of chemically-activated acrylic resin. Test pieces were made of clear acrylic resin using a rectangular mold and employing two techniques: wet polymerization under pressure (n = 20) and dry polymerization under pressure (n = 20). Test pieces were subdivided into four equal groups: distilled water (control), sodium bicarbonate, 1% sodium hypochlorite and effervescent ats. The 30-day cycling technique consisted of immersing the test pieces in 100 ml of solution for 10 min three times a day and placing them in closed containers containing artificial saliva at 37°C. Subsequently, the flexural resistance of samples was tested. Data were analyzed using two-way analysis of variance (ANOVA) with forces serving as the dependent variables and the polymerization technique and cleaning agents as independent variables. Post hoc multiple comparisons were performed using Tukey’s test. There was no statistically significant difference in the flexural strength between the two polymerization techniques. The greatest flexural strength was observed for the effervescent tablets group followed by the control and 1% sodium hypochlorite groups which were statistically similar. Thus, the sodium bicarbonate solution caused the lowest flexural resistance of the test pieces.

Bacteriological quality of irrigation water from vegetable gardens in the municipalities of Araraquara, Boa Esperança do Sul and Ibitinga, SP

This work aimed to assess the bacteriological quality of water used in the irrigation of vegetable gardens in the municipalities of Araraquara, Boa Esperança do Sul and Ibitinga, São Paulo, Brazil. A total of 80 samples of water used in the irrigation of 40 vegetable gardens were analyzed, two samples coming from each vegetable garden. They were collected at the same site in different months, which resulted in two sample collection groups. The most probable number (MPN/100mL) of total coliforms, thermotolerant coliforms and enterococci was identifi ed by means of the multiple tube technique. The analysis of the fi rst group samples showed quantities of thermotolerant coliforms above the amount allowed by current law for irrigation water (CONAMA Resolution n. 357) in nine cases. The owners of those vegetable gardens were then instructed in water disinfection procedures. After the analysis of the second group samples, it was noticed that only one sample did not meet the quality standards, and it was collected at a site where no disinfection procedure had been carried out. According to the results, 77.5% of the vegetable gardens were using water whose samples meet the quality standards. After the owners were instructed with regard to disinfection procedures, that number changed to 97.5%, which confi rms the importance of controlling and supervising irrigation water quality

Caracterização dos resíduos do processamento de mandioca para produção de bioetanol

Aiming to get the best economic advantage in ethanol production from cassava roots, this study presented a physiochemical characterization from two different types of solid waste in two types of processing of the raw materials in manufacturing ethanol. The processing of cassava roots begins with the disintegration and washing the roots with the addition of 20% more water to obtain a pulp which was treated and stirred in the reactor while adding enzyme α-amylase at a temperature of 90°C for 2 hours. Then we performed a pH adjustment while lowering the temperature to 60 ° C with the addition of the enzyme amiloglucosidase and then stirring for 14 hours. The hydrolyzate obtained was the source of two types of waste which are: i) Solid residue obtained after filtration of the hydrolyatze and ii) Solid waste obtained from filtering wine after alcoholic fermentation of the hydrolyzate with the addition of a dried yeast strain Y-940 manufactured by MAURI OF BRAZIL SA (2%) at a temperature of 25º C. The results of the laboratory analysis showed that the byproducts derived from the hydrolysis and fermentation showed very similar chemical compositions. With levels between 39 and 41% fiber, 0.5% lipids, 20 and 30% carbohydrates, protein 0.5 and 1.50, 6 and 8% acidity, and 20 and 30% soluble solids.

Bamboo as sustainable material used in design and civil construction: species, management, characterization and applications

The use of bamboo as construction and raw material for producing products can be considered a feasible alternative to the abusive use of steel, concrete and oil byproducts. Its use can also reduce the pressure on the use of wood from native and planted forests. Although there are thousands of bamboo species spread about the world and Brazil itself has hundreds of native species, the use and basic knowledge of its characteristics and applications are still little known and little disseminated. This paper's main objective is to introduce the species, the management phases, the physical and mechanical characteristics and the experiences in using bamboo in design and civil construction as per the Bamboo Project implemented at UNESP, Bauru campus since 1994. The results are divided into: a) Field activities - description of the technological species of interest, production chain flows, types of preservative treatments and clump management practices for the development, adaptation and production of different species of culms; b) Lab experiments - physical and mechanical characterization of culms processed as laminated strips and as composite material (glue laminated bamboo – glubam); c) Uses in projects - experiences with natural bamboo and glubam in design, architecture and civil construction projects. In the final remarks, the study aims to demonstrate, through practical and laboratory results, the material's multi-functionality and the feasibility in using bamboo as a sustainable material.

Eficiência de um sistema de desinfecção solar de águas residuárias domésticas com adição de diferentes doses de peróxido de hidrogênio

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Pré-tratamento e hidrólise da casca de uva para liberação de açúcares fermentescíveis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Quality and safety of pet treats: assessment of the microbial safety and quality of pet treats

The aim of this study was to evaluate the hygienic and sanitary conditions of pettreats from an export industry. The occurrence of Salmonella, enumerated sulfite-reducing Clostridium (SRC), coagulase-positive Staphylococcus (CPS) and total(TC) and thermotolerant coliforms (TTC) was studied. Of the 108 samples ana-lyzed, 22 were contaminated by some microorganism. TC were detected at twosamples (3.5 × 101and 4.5 × 101colony-forming units [cfu]/g), SRC in 19 samples(1.0 × 101to 1.3 × 105cfu/g) and Salmonella spp. at only one sample; CPS andTTC were not detected. These findings indicate the microbiological safety of mostitems, except for a mix of dried bovine offal, with 1.3 × 105cfu/g of SRC, and onemix of dehydrated bovine viscera contaminated with Salmonella. The current pro-duction processes and the food safety management system are adequate to guar-antee the production of microbiologically safe foods, but that some improvementscan still be made with regard to cleaning and disinfection and hygiene training.

Digestibilidade do amido e disponibilidade de ca e p em alimentos energéticos extrusados para a tilápia do nilo (Oreochromis niloticus)

Apparent digestibility coefficients (ADC) of starch and calcium (Ca) and phosphorus (P) apparent availability were evaluated in five cereal grain products and byproducts (corn, wheat meal, rice grain, rice bran and sorghum) for Nile tilapia. Chromic oxide was used as an external digestibility marker. The highest Ca and P apparent availability, respectively, were obtained for rice grain (43.03 and 64.79%), sorghum (39.89 and 58.09%) and corn (22.18 and 19.48%), while rice bran (-31.49 and 3.25%) and wheat meal (5.80 and 1.18%) showed the lowest values. Starch digestibility varied between 99.45 and 95.59% among the evaluated ingredients. This high ADC of starch observed in this study confirms that Nile tilapia is able to efficiently digest and utilize complex carbohydrates.