Studies of molecular bonding, interactions and decomposition reactions on the (001) surface of ruthenium

The interactions of N₂, formic acid and acetone on the Ru(001) surface are studied using thermal desorption mass spectrometry (TDMS), electron energy loss spectroscopy (EELS), and computer modeling.

Low energy electron diffraction (LEED), EELS and TDMS were used to study chemisorption of N₂ on Ru(001). Adsorption at 75 K produces two desorption states. Adsorption at 95 K fills only the higher energy desorption state and produces a (√3 x √3)R30° LEED pattern. EEL spectra indicate both desorption states are populated by N₂ molecules bonded "on-top" of Ru atoms.

Monte Carlo simulation results are presented on Ru(001) using a kinetic lattice gas model with precursor mediated adsorption, desorption and migration. The model gives good agreement with experimental data. The island growth rate was computed using the same model and is well fit by R(t)^m - R(t₀)^m = At, with m approximately 8. The island size was determined from the width of the superlattice diffraction feature.

The techniques, algorithms and computer programs used for simulations are documented. Coordinate schemes for indexing sites on a 2-D hexagonal lattice, programs for simulation of adsorption and desorption, techniques for analysis of ordering, and computer graphics routines are discussed.

The adsorption of formic acid on Ru(001) has been studied by EELS and TDMS. Large exposures produce a molecular multilayer species. A monodentate formate, bidentate formate, and a hydroxyl species are stable intermediates in formic acid decomposition. The monodentate formate species is converted to the bidentate species by heating. Formic acid decomposition products are CO₂, CO, H₂, H₂O and oxygen adatoms. The ratio of desorbed CO with respect to CO₂ increases both with slower heating rates and with lower coverages.

The existence of two different forms of adsorbed acetone, side-on, bonded through the oxygen and acyl carbon, and end-on, bonded through the oxygen, have been verified by EELS. On Pt(111), only the end-on species is observed. On dean Ru(001) and p(2 x 2)O precovered Ru(001), both forms coexist. The side-on species is dominant on clean Ru(001), while O stabilizes the end-on form. The end-on form desorbs molecularly. Bonding geometry stability is explained by surface Lewis acidity and by comparison to organometallic coordination complexes.

Hall coefficient and resistivity of an amorphous palladium-silicon alloy

The Hall coefficient and resistance in several specimens of an amorphous metallic alloy containing 80 at.% palladium and 20 at.% silicon have been investigated at temperatures between 4.2°K and room temperature. An ideal limiting behavior of these transport coefficients was analyzed on the basis of the nearly free electron model to yield a carrier density of 9 x 10²² cm.^-3, or about 1.7 electrons per palladium atom, and a mean free path of about 9Å which is almost constant with temperature. The deviations of the individual specimens from this ideal behavior, which were small but noticeable in the relative resistivity and much greater in the Hall coefficient, can be explained by invoking disk-shaped crystalline regions with low resistivity and a positive Hall coefficient. A detailed calculation shows how a volume fraction of such crystalline material too small to be noticed in X-ray diffraction could have a significant effect on the resistivity and a much greater effect on the Hall coefficient.

Applying systematic design: the flight refuelling probe project

This report is a product of close industry-academia collaboration between British Aerospace and the Cambridge Engineering Design Centre (EDC). British Aerospace designs and integrates some of the most complex systems in the world, and its expertise in this field has enabled the company to become the United Kingdom's largest exporter. However, to stay at the forefront of the highly competitive aerospace industry it is necessary to seek new ways to work more effectively and more efficiently. The Cambridge EDC has played a part in supporting these needs by providing access to the methods and tools that it has developed for improving the process of designing mechanical systems. The EDC has gained an international reputation for the quality of its work in this subject. Thus, the collaboration is between two organisations each of whom are leaders in their respective fields. The central aim of the project has been to demonstrate how a systematic design process can be applied to a real design task identified by industry. The task selected was the design of a flight refuelling probe which would enable a combat aircraft to refuel from a "flying tanker". However, the systematic approach, methods and tools described in this report are applicable to most engineering design tasks. The findings presented in this report provide a sound basis for comparing the recommended systematic design process with industrial practice. The results of this comparison would enable the company to define ways in which its existing design process can be improved. This research project has a high degree of industrial relevance. The value of the work may be judged in terms of the opportunities it opens up for positive changes to the company's engineering operations. Several members of the EDC have contributed to the project. These include Dr Lucienne Blessing, Dr Stuart Burgess, Dr Amaresh Chakrabarti, Major Mark Nowack, Aylmer Johnson and Dr Paul Weaver. At British Aerospace special thanks must go to Alan Dean and David Halliday for their interest and the support they have given. The project has been managed by Dr Nigel Upton of British Aerospace during a 3 year secondment to the EDC.

Properties of α-monoclinic selenium

The growth of bulky and platelet shaped α-monoclinic crystals is discussed. A simple method is devised for identifying and orienting them.

The density, previously in disagreement with the value calculated from x-ray studies, is carefully redetermined, and found to be in good agreement with the latter.

The relative dielectric constant is determined, an effort being made to eliminate errors inherent in previous measurements, which have not been in agreement. A two parameter model is derived which explains the anisotropy in the relative dielectric constant of orthorhombic sulfur, which is also composed of 8-atom puckered ring molecules. The model works less well for α-monoclinic selenium. The relative dielectric constant anisotropy is quite noticeable, being 6.06 along the crystal b axis, and 8.52-8.93 normal to the axis.

Thin crystal platelets of α-monoclinic selenium (less than 1µ thick) are used to extend optical transmission measurements up to 4.5eV. Previously the measurements extended up to 2.1 eV, limited by the thickness of the available crystals. The absorption edge is at 2.20 eV, with changes in slope of the absorption coefficient occurring at 2.85 eV and 3.8 eV. Measurement of transmission through solutions of selenium in CS_2 and trichlorethylene yield an absorption edge of 2.75 eV. There is evidence the selenium exists in solution partly as Se_8 rings, the building block of monoclinic selenium. Transmission is measured at low temperatures (80°K and 10°K) using the platelets. The absorption edge is at 2.38 eV and 2.39 eV, respectively, for the two temperatures. Measurements at low temperatures with polarized and unpolarized light reveal interesting absorption anisotropy near 2.65 eV.

Influence of recording conditions on crossed-beam photorefractive gratings in doubly doped LiNbO3 crystals

The influence of the recording conditions, including the widths of the recording beams, the width ratio of the recording beams, and the recording angles, on the properties of crossed-beam photorefractive gratings in doubly doped LiNbO3 crystals is studied. A theoretical model that combines the band transport model with two-dimensional coupled-wave theory is proposed. The numerical calculations of the space-charge field, the intensity profiles of the diffracted beam, and the diffraction efficiency are presented. (C) 2006 Optical Society of America.

Pulse shaping properties of volume holographic gratings in anisotropic media

Based on a modified coupled wave theory, the pulse shaping properties of volume holographic gratings (VHGs) in anisotropic media VHGs are studied systematically. Taking photorefractive LiNbO3 crystals as an example, the combined effect that the grating parameters, the dispersion and optical anisotropy of the crystal, the pulse width, and the polarization state of the input ultrashort pulsed beam (UPB) have on the pulse shaping properties are considered when the input UPB with arbitrary polarization state propagates through the VHG. Under the combined effect, the diffraction bandwidth, pulse profiles of the diffracted and transmitted pulsed beams, and the total diffraction efficiency are shown. The studies indicate that the properties of the shaping of the o and e components of the input UPB in the crystal are greatly different; this difference can be used for pulse shaping applications. (c) 2006 Optical Society of America.

Research on a scanner for tilting orthogonal double prisms

The original scanner for tilting orthogonal double prisms is studied to test the tracking performance in intersatellite laser communications. With a reduction ratio of more than 100 times from the change rate of the angle of beam deviation to that of the tilting angle of each prism, the theoretical analysis performed, as well as the verification experiment, indicates that the scanner can meet the requirements of the scanning accuracy superior to 0.5 mu rad with the scanning range greater than 500 mu rad and can facilitate the mechanical structure design. (c) 2006 Optical Society of America.

Anisotropic diffraction of stratified volume holographic grating in photorefractive media

We have studied the anisotropic diffraction properties of the stratified volume holographic gratings recorded in photorefractive media using the anisotropic coupled wave theory. It is shown that the diffraction efficiency of such system exhibit the uniform periodic Bragg selectivity properties. In addition the dependence of the stratified volume holographic optical elements (SVHOEs) diffraction properties on the buffer-layer thickness, grating-layer thickness, number of modulation layers, and total thickness of system are discussed in detail. (c) 2005 Elsevier GrnbH. All rights reserved.

Diffraction properties of volume holographic gratings for an ultrashort pulsed beam with different polarization states readout

The diffraction properties of volume holographic gratings are studied when the gratings are illuminated by an ultrashort pulsed beam with different polarization states. The developed coupled wave theory of Kogelnik is used. Considering the dispersion effect of the grating media, solutions for the diffracted and transmitted intensities, diffraction efficiencies and the bandwidths of the gratings are given in transmission volume holographic gratings and reflection volume holographic gratings. The bandwidths of the gratings are reduced by the dispersion effect of the grating media. They also have different influences on the diffraction of an ultrashort pulsed beam with different polarization states. For different values of the ratio of the spectral bandwidth of the input pulse to that of the grating, the changes of the spectral and temporal distributions of the diffracted intensities, as well as the diffraction efficiencies of the gratings are shown.

Effect of type of otolith and preparation technique on age estimation of larval and juvenile spot (Leiostomus xanthurus)

Otoliths of larval and juvenile fish provide a record of age, size, growth, and development (Campana and Neilson, 1985; Thorrold and Hare, 2002). However, determining the time of first increment formation in otoliths (Campana, 2001) and assessing the accuracy (deviation from real age) and precision (repeatability of increment counts from the same otolith) of increment counts are prerequisites for using otoliths to study the life history of fish (Campana and Moksness, 1991). For most fish species, first increment deposition occurs either at hatching, a day after hatching, or after first feeding and yolksac absorption (Jones, 1986; Thorrold and Hare, 2002). Increment deposition before hatching also occurs (Barkmann and Beck, 1976; Radtke and Dean, 1982). If first increment deposition does not occur at hatching, the standard procedure is to add a predetermined number to increment counts to estimate fish age (Campana and Neilson, 1985).

The Ancillary Harvest of Atlantic Menhaden, Brevoortia tyrannus, Roe on the North Carolina Coast

Gravid Atlantic menhaden, Brevoortia tyrannus, are available along the central coast of North Carolina during the fall and are harvested by the purse-seine fleet from the port of Beaufort. Virtually all of the catch, sexually immature fish included, is reduces to fish meal, fish oil, and fish solubles; however, minor quantities of roe from ripening female menhaden are extracted for local consupmtion. Routine and selective port sampling information was used to characterize the seasonal and biostatistical nautre of the roe menhaden catches at Beaufort. Fishermen recognize two size classes of roe Atlantic menhaden: "forerunners," which are usually the smallest and earliest adult menhaden encountered in the Fall Fishery, and "mammy shad," which are the largest menhaden harvested and produce the greatest roe yields. Roe is extracted from femal fish at various points along the reduction process stream and by several techniques. Vessel cremen and factory personnel extract menhaden roe for personal and local consumption. Undetermined quantities of menhaden roe are channeled into local retail seafood markets. Wholesale prices are about $20 per gallon of roe, while retail prices are about $5 per pound. Carteret County, North Carolina, is probably the only area on the U.S. Atlantic and Gulf coasts where menhaden roe is sold in retail seafood markets. The potential of extracting menhaden roe for foreign markets is discussed

The Origins and Early History of the Steamer Albatross, 1880–18

Spencer Fullerton Baird (Fig. 1), a noted systematic zoologist and builder of scientific institutions in 19th century America, persuaded the U.S. Congress to establish the United States Commission of Fish and Fisheries1 in March 1871. At that time, Baird was Assistant Secretary of the Smithsonian Institution. Following the death of Joseph Henry in 1878, he became head of the institution, a position he held until his own demise in 1887. In addition to his many duties as a Smithsonian official, including his prominent role in developing the Smithsonian’s Federally funded National Museum as the repository for governmental scientific collections, Baird directed the Fish Commission from 1871 until 1887. The Fish Commission’s original mission was to determine the reasons and remedies for the apparent decline of American fisheries off southern New England as well as other parts of the United States. In 1872, Congress further directed the Commission to begin a large fish hatching program aimed at increasing the supply of American food f

Population Biology and Life History of the North American Menhadens, Brevoortia spp.

Four recognized species of menhaden, Brevoortia spp., occur in North American marine waters: Atlantic menhaden, B. tyrannus; Gulf menhaden, B. patronus; yellowfin menhaden. B. smithi; and finescale menhaden, B. gunteri. Three of the menhaden species are known to form two hybrid types. Members of the genus range from coastal waters of Veracruz, Mex., to Nova Scotia, Can. Atlantic and Gulf menhaden are extremely abundant within their respective ranges and support extensive purse-seine reduction (to fish meal and oil) fisheries. All menhaden species are estuarine dependent through late larval and juvenile stages. Depending on species and location within the range, spawning may occur within bays and sounds to a substantial distance offshore. Menhaden are considered to be filter-feeding, planktivorous omnivores as juveniles and adults. Menhaden eggs, immature developmental stages, and adults are potential prey for a large and diverse number of predators. North American menhadens, including two hybrids, are hosts for the parasitic isopod, Olencira praegustator, and the parasitic copepod, Lemaeenicus radiatus. Although the data are quite variable, a dome-shaped Ricker function is frequently used to describe the spawner-recruitment relationship for Atlantic and Gulf menhaden. Each of these species is treated as a single stock with respect to exploitation by the purse-seine reduction fishery. Estimates of instantaneous natural (other) mortality rates are O.45 for Atlantic menhaden and 1.1 for Gulf menhaden.

Overview of Mark-recovery Studies on Adult and Juvenile Atlantic Menhaden, Brevoortia tyrannus, and Gulf Menhaden, B. patronus

Extensive mark-recapture studies using internal ferromagnetic tags have been conducted on Atlantic menhaden, Brevoortia tyrannus, and Gulf menhaden, B. patronus. From 1966 through 1969, 1,066,357 adult Atlantic menhaden were tagged; subsequently, from 1970 through 1987, 428,272 juveniles of this species were tagged. Similarly, from 1969 through 1971, 75,673 adult Gulf menhaden were tagged; concurrently from 1970 through 1985, 236,936 juveniles were tagged and released. This report provides an overview of the history of the tagging program, methodologies for both release and recovery activities, a summary of release areas and number of fish tagged within each area, and a review of assumptions necessary for the analysis of this type of mark-recovery data. The resulting data sets have proven to be highly useful for a variety of analyses ranging from determination of migratory patterns and population structure to estimating mortality rates. The relatively wide range of acceptance of tagging results by laymen, industry, and analysts alike have made these data extremely useful for management-oriented analyses.