Evaluation of marginal microleakage in Class II cavities: Effect of microhybrid, flowable, and compactable resins

Objective: The goal of the present study was to evaluate the microleakage on the cementum/dentin and enamel surfaces in Class II restorations, using different kinds of resin composite (microhybrid, flowable, and compactable). Method and materials: Forty human caries-free molars were extracted and selected. Eighty Class II standardized cavities were made in the cervical wall at the cementoenamel junction (CEJ) and at the mesial and distal surfaces. The teeth were divided into four groups: G1 - adhesive system + microhybrid resin composite Z100; G2 - adhesive system + compactable resin composite Prodigy Condensable; G3 - adhesive system + flowable resin composite Revolution + Z100 resin composite; G4 - adhesive system + Revolution fluid resin + compactable resin composite Prodigy Condensable. The adhesive system used in this study was Scotchbond Multi-Purpose Plus. The specimens were thermocycled in baths of 5°C and 55°C for 1,000 cycles and immersed in 50% silver nitrate solution. The specimens then were sectioned and evaluated on degree of dye penetration. Results: The results were evaluated using the nonparametric Kruskall-Wallis test, which showed a statistically significant difference between groups G1 and G4, G2 and G4, and G3 and G4. Conclusions: None of the materials was able to eliminate the marginal microleakage at the cervical wall; the application of a low-viscosity resin composite combined with a compactable resin composite significantly decreased the microleakage.

Fator de crescimento derivado de plaquetas humanas obtido por uma metodologia rápida e de baixo custo

Human platelet-derived growth factor (PDGF) was purified from lysates of clinically outdated human platelets by ionic exchange chromatography in CM-Sepharose. The eluated fraction was submitted to the Immunoblot/Slot Blot assay using anti-PDGF-AA and anti-PDGF-BB polyclonal antibodies and was evaluated as to its biological activity through the test of [H 3]-thymidine incorporation in NIH/3T3 cell line fibroblasts in culture. The Immunoblot/Slot Blot assay using anti-PDGF-AA and anti-PDGF-BB antibodies proved the presence of the PDGF in chromatographic cationic fraction. The comparison of biological activities between fiblobrast stimulation assay using recombinant PDGF-AB and partially purified PDGF was demonstrated in 165.796 and 157.567 cpm, respectively. This result, proved the potent mitogenic effect of partially purified PDGF and consequently their evidence about the wound healing activity.

A biodiversidade bentônica em lagoa marginal ao rio Paranapanema na zona de sua desembocadura, na represa de Jurumirim

Coqueiral lake is a marginal lake located at the southeast São Paulo State, in the mouth zone of the Paranapanema river into Jurumirim Reservoir and it has high connectivity with the Paranapaneina river. This work aimed to verify the benthic biodiversity in areas of the lake bottom. 18 sampling sites in the lake were selected, including shallow and deep areas. The samples were taken every three months during one year. Physical and chemical water variables (level, transparency, dissolved oxygen, pH, and electric conductivity) were analyzed. Sediment samples were picked up in triplicate for fauna and abiotic factors analysis (granulometric composition and sediment organic content), using Petersen dredge. The material was sorted out and analyzed under stereoscopic microscope. Counting and identification of the organisms were accomplished and diversity, relative abundance, taxonomic richness and dominance index were calculated. The analysis revealed a fauna with low species diversity and, with Chironomidae and Ephemeroptera dominance. Ephemeroptera, Campsurus, dominated in the hottest period and with low lake depth. Organisms' distribution had as main factors depth, transparency, pH, and water temperature. In the comparison between shallow and deep areas, a small density of organism in the deep regions was observed.

Fatores intrínsecos do custo energético da locomoção durante a natação

The amount of metabolic energy spent in transporting the body mass of the subject over a unit of distance has been defined as the energy cost of locomotion, or regarding to swimming, cost of swimming. The differences in the cost of swimming between the individuals seem to be influenced by two main factors, the hydrodynamic resistance and technical skill of the swimmer. The lower cost of swimming showed by females has been attributed to a smaller hydrodynamic resistance due to their smaller size, larger percentage fat and more streamlined position. However, the difference in cost of swimming between males and females disappears when correcting for body size. With regard to children, the higher energy cost of swimming when correcting for body size may be caused by the lower swimming technique showed by them. For individuals with the same anthropometric characteristics, the better swimming technique and larger size of propelling surface, associated with higher propelling efficiency, may decrease the energy cost of swimming. When comparing different types of strokes, the most economical stroke is crawl, followed by backstroke, irrespective the swimming velocity. Butterfly is the less economical at low velocities (< 0.8 m·s-1). However, above that velocity the breaststroke become the less economical stroke.

Medicação de alto custo para portador de sofrimento psíquico: Um estudo preliminar dos custos

The present work aims to raise the costs of high-cost drugs used to treat patients of Refractory Schizophrenia in ambulatory unit. The study was carried out in the Psychosocial Support Center, which treated 33 patients with these medications, during the period of June, 2005 to May, 2006. Data analysis disclosed that the mostly used drugs to treat the carriers of Refractory Schizophrenia were: clozapina and risperidona. It was observed that the treatment with olanzapina is more expensive than that with risperidona. The study concluded that the analysis of the consumption and costs of drugs of high cost is necessary to subside better management of the expenses and new investments in the service. Moreover, the necessity of more studies in the area was also identified to contribute with the control of costs.

Influence of cavity preparation and curing method on the marginal seal of resin composite restorations: an in vitro evaluation.

OBJECTIVE: To evaluate the influence of cavity design and photocuring method on the marginal seal of resin composite restorations. METHOD AND MATERIALS: Seventy-two bovine teeth were divided into 2 groups: group 1 received box-type cavity preparations, and group 2 received plate-type preparations. Each group was divided into 3 subgroups. After etching and bonding, Z250 resin composite (3M Espe) was applied in 2 equal increments and cured with 1 of 3 techniques: (1) conventional curing for 30 seconds at 650 mW/cm2; (2) 2-step photocuring, in which the first step was performed 14 mm from the restoration for 10 seconds at 180 mW/cm2 and the second step was performed in direct contact for 20 seconds at 650 mW/cm2; or (3) progressive curing using Jetlite 4000 (J. Morita) for 8 seconds at 125 mW/cm2 and then 22 seconds at 125 mW/cm2 up to 500 mW/cm2. The specimens were thermocycled for 500 cycles and then submitted to dye penetration with a 50% silver nitrate solution. Microleakage was assessed using a stereomicroscope. Data were analyzed using analysis of variance and Tukey test (5% level of significance). RESULTS: A statistically significant difference was found between groups when a double interaction between photocuring and cavity preparation was considered (P = .029). CONCLUSIONS: No one type of cavity preparation or photocuring method prevented micro-leakage. The plate-type preparation showed the worst dye penetration when conventional and progressive photocuring methods were used. The best results were found using the 2-step photocuring with the plate-type preparation.

Effect of cast rectifiers on the marginal fit of UCLA abutments

Objectives: This study assessed the effect of cast rectifiers on the marginal misfit of cast UCLA abutments compared to premachined UCLA abutments. The influence of casting and porcelain baking on the marginal misfit of these components was also investigated. Methods: Two groups were analyzed: test group - 10 cast UCLA abutments, finished with cast rectifier and submitted to ceramic application; control group - 10 premachined UCLA abutments, cast with noble metal alloy and submitted to ceramic application. Vertical misfit measurements were performed under light microscopy. In the test group, measurements were performed before and after the use of cast rectifiers, and after ceramic application. In the control group, measurements were performed before and after casting, and after ceramic application. Data were submitted to statistical analysis by ANOVA and Tukey's test (α= 5%). Results: The use of cast rectifiers significantly reduced the marginal misfit of cast UCLA abutments (from 25.68μm to 14.83μm; p<0.05). After ceramic application, the rectified cylinders presented misfit values (16.18μm) similar to those of premachined components (14.3 μm). Casting of the premachined UCLA abutments altered the marginal misfit of these components (from 9.63 μm to 14.6 μm; p<0.05). There were no significant changes after porcelain baking, in both groups. Conclusion: The use of cast rectifiers reduced the vertical misfit of cast UCLA abutments. Even with carefully performed laboratory steps, changes at the implant interface of premachined UCLA abutments occurred. Ceramic application did not alter the marginal misfit values of UCLA abutments.

Mastite subclínica causada por Staphylococcus aureus: Custo-benefício da antibioticoterapia de vacas em lactação

Economic evaluation of the treatment bovine subclinical mastitis caused by S. aureus was evaluated. Two hundred and seventy udder quarters with or without subclinical mastitis were distributed into four groups, in conformity to lactational stage and treatments. Group 1 included animals treated between 10 and 60 days of lactation; group 2 included animals treated from 61 days of lactation to two months before drying; group 3 included animals no treated between 10 and 60 days of lactation; group 4 included animals no treated from 61 days of lactation to two months before drying. Treatment with gentamicin (150mg) was accomplished by intramammary doses, once a day, after performing sensitivity tests. The mammary quarters were re-evaluated after 30 days. The costs with the treatment were calculated considering a S. aureus prevalence of 5% as well as expenses with antibiotic, milk disposal, tests of drug sensitivity and workload. There was loss of income of 2% and 14% in the groups 1 and 2, respectively, when compared with the values before the treatment. In such case, the treatment of bovine subclinical mastitis caused by S. aureus in the lactation was economically unviable.

In vitro evaluation of marginal leakage in bonded restorations, with mechanical or chemical-mechanical (Carisolv) removal of carious tissue

This study carried out an in vitro evaluation and comparison of the occurrence of marginal leakage in bonded restorations using mechanical or chemical-mechanical (Carisolv) removal of carious tissue. For that purpose, 40 extracted decayed human molars were divided into 4 groups: GI (burs + Prime & Bond NT + TPH), GII (Carisolv + Prime & Bond NT + TPH), GIII (burs + SBMP + Z100) and GIV (Carisolv + SBMP + Z100). After accomplishment of the restorations and thermal cycling, the teeth were exposed to dye, sectioned and qualitatively evaluated. The results demonstrated that the system of removal of carious tissue did not influence the results of microleakage at any of the cavity margins. At dentinal margins, use of the Prime & Bond NT + TPH restorative system allowed the occurrence of less microleakage than the SBMP + Z100 system.

The effect of endodontic materials on the optical density of dyes used in marginal leakage studies

The aim of this study was to determine the effect of the exposure of different endodontic materials to different dye solutions by evaluating the optical density of the dye solutions. Seventy-five plastic tubes were filled with one of the following materials: AH Plus, Sealapex, Portland cement, MTA (Angelus and Pro Root) and fifteen control plastic tubes were not. Each specimen of material and control was immersed in a container with 1 ml of each dye solution. A 0.1 ml-dye solution aliquote was removed before immersion and after 12, 24, 48 and 72 hours of each specimen immersion to record its optical density (OD) in a spectrophotometer. Statistical analysis was performed with ANOVA and Tukey tests (5%). No significant difference was found among any of the solution OD values for AH Plus cement. Portland cement promoted different OD values after 12 hours of immersion. MTA-Angelus cement presented different OD values only for 2% rhodamine B and the MTA-Pro Root cement presented different OD values in all 2% rhodamine B samples. Sealapex cement promoted a reduction in the India Ink OD values. Dye evaluation through OD seems to be an interesting method to select the best dye solution to use in a given marginal leakage study.

Estudios sobre la juventud marginal latinoamericana

Incluye Bibliografía

Consumo e custo de energia elétrica na cultura de citros irrigado por gotejamento e microaspersão, com três lâminas de água

The objective of this work was to analyze the consumption, electric energy cost, and economic results of irrigated citrus (Citrus sinensis). The treatments consisted of a dripping irrigation system with one and two lateral distribution lines, a micro sprinkler irrigation system and a treatment without irrigation. For each irrigation system, three water depths were used: 100%, 75% and 50% of Etc (citrus evapotranspiration). The electric energy cost for two tariff groups, Group A and Group B, was studied. For Group A, the expenses with energy were determined for the Conventional Binomial Structure tariff, the Hour-seasonal tariff (green and blue) and the special tariff for nocturnal irrigation. The kWh cost for the tariff systems were obtained from the website of CPFL (São Paulo State Power and Light Company, Brazil). The best relation between the electric energy consumption (kWh.ha -1) and productivity (t.ha -1) occurred in the treatment irrigated with 50% of the Etc. The irrigated treatments increased productivity. The biggest productivity was observed in the irrigation treatments with 50% of the Etc when compared to the ones with 100% of the Etc. The blue and green Hour-seasonal tariff system of Group A (nocturnal irrigation) was the best option. A biggest economic turnover occurred in the treatments irrigated with 50% of the Etc.

Custo de produção e indicadores de rentabilidade da cultura do milho safrinha

The objective of this study was to evaluate the production cost and profitability of the second season corn crop in the Medio Paranapanema region, São Paulo State Brazil, under two technological levels (middle and high technology), crop 2008/2009, and compare the results with the 2006/2007 agricultural year. Effective and total operational cost as well as five profitability indicators were used. It was concluded that the high technology production cost for corn crop (direct seedling, sowing during the recommended period, use of simple hybrid seed, application of side-dressing fertilization, and treatment of seeds with different insecticides) was superior to the middle technology production cost (direct seedling, sowing after the recommended time, use of double hybrid seed, and no side-dressing fertilization). However, the average cost was inferior (US$ 8.5), due to a higher yield (4 t). The high technology corn crop was profitable (gross income and profitability index of 14% and 12%, respectively). For the middle technology crop, profitability indexes pointed out that the cropping system needs to be reevaluated by technicians and research institutions, regarding the adequate technical recommendations. Profitability indexes decreased considerably in both cropping systems. It was verified that, in relation to the 2006/2007 harvest period, the total operational cost increased for both technologies, mainly because of the increase of supplies prices.

Comportamento do mercado de terras no Brasil

Incluye Bibliografía

Marginal resection for treatment of mandibular osteomyelitis associated with osteopetrosis: Case report

Osteopetrosis (OP) is a rare hereditary disorder characterized by a dysfunction of the osteoclasts that impairs bone resorption, which together with the normal osteoblastic activity forms intense bone sclerosis with reduction of marrow. A common complication that arises, most frequently, as a result of tooth extraction is mandibular osteomyelitis. There is no consensus on the literature about the treatment of this infection in an osteopetrotic patient, therefore, the purpose of this paper is to report a case of marginal resection for treatment of mandibular osteomyelitis in an osteopetrotic patient and discuss relevant features of this procedure. © 2010 European Association for Cranio-Maxillo-Facial Surgery.