Sustainable vegetable crop supply problem

We consider an agricultural production problem, in which one must meet a known demand of crops while respecting ecologically-based production constraints. The problem is twofold: in order to meet the demand, one must determine the division of the available heterogeneous arable areas in plots and, for each plot, obtain an appropriate crop rotation schedule. Rotation plans must respect ecologically-based constraints such as the interdiction of certain crop successions, and the regular insertion of fallows and green manures. We propose a linear formulation for this problem, in which each variable is associated with a crop rotation schedule. The model may include a large number of variables and it is, therefore, solved by means of a column-generation approach. We also discuss some extensions to the model, in order to incorporate additional characteristics found in field conditions. A set of computational tests using instances based on real-world data confirms the efficacy of the proposed methodology. (C) 2009 Elsevier B.V. All rights reserved.

Matrix effects observed during pesticides residue analysis in fruits by GC

The influence of the sample matrix in the CC-electron-capture detection analysis of the pesticides dimethoate, diazinon, chlorothalonil.. parathion methyl and fenitrothion in fruits samples has been studied. Experiments have been carried out where the pesticide responses in standard solutions prepared in selected solvent were compared with their response when present in apple, mango, papaya, banana, pineapple and melon extracts. The presence of matrix effects (MEs) and their extent were shown to be simultaneously influenced by several factors (matrix concentration, matrix type, pesticide concentration, analytical range). Pronounced MEs were observed particularly for dimethoate and diazinon in all matrices tested; in lower concentrations, all pesticides presented significant ME. The other pesticides presented variable ME. Higher ME enhancement was detected at lower pesticide concentration levels of and/or at higher matrix concentration solutions. The ME detected for fenitrothion, in the analytical range evaluated, were dependent on matrix type. For each pesticide, solvent and matrix-matched calibrations were compared for all fruit samples, and it could be concluded that quantitation based on standard solutions prepared in blank matrix extract (matrix-matched calibration) should be used to compensate the MEs and to obtain more accurate results for the pesticides studied.

Time-resolved fluorescence microscopy of gunshot residue: an application to forensic science

Time-resolved fluorescence microscopy has rapidly emerged as the technique of choice for many researchers aiming to gain specific insights into the dynamics of intricate biological systems. Although the unique advantages the technique provides over other methods have proven to be particularly useful in the biosciences, to date they have been largely unexploited by other research disciplines. In this paper, we demonstrate the capacity of time-resolved fluorescence microscopy as a practical analytical tool in the forensic sciences via the imaging of gunshot residues that are expelled when a firearm is discharged. This information may prove to be useful for determination of the true sequence of events that took place in a firearm related crime.

A new modelling approach to simulate preferential flow and transport in water repellent media: parameter sensitivity, and effects on crop growth and solute leaching

A modified version of the popular agrohydrological model SWAP has been used to evaluate modelling of soil water flow and crop growth at field situations in which water repellency causes preferential flow. The parameter sensitivity in such situations has been studied. Three options to model soil water flow within SWAP are described and compared: uniform flow, the classical mobile-immobile concept, and a recent concept accounting for the dynamics of finger development resulting from unstable infiltration. Data collected from a severely water-repellent affected soil located in Australia were used to compare and evaluate the usefulness of the modelling options for the agricultural management of such soils.

The study shows that an assumption of uniform flow in a water-repellent soil profile leads to an underestimation of groundwater recharge and an overestimation of plant transpiration and crop production. The new concept of modelling taking finger dynamics into account provides greater flexibility and can more accurately model the observed effects of preferential flow compared with the classical mobile–immobile concept. The parameter analysis indicates that the most important factor defining the presence and extremity of preferential flow is the critical soil water content.

Comparison of the modelling results with the Australian field data showed that without the use of a preferential flow module, the effects of the clay amendments to the soil were insufficiently reproduced in the dry matter production results. This means that the physical characteristics of the soil alone are not sufficient to explain the measured increase in production on clay amended soils. However, modelling with the module accounting for finger dynamics indicated that the preferential flow in water repellent soils that had not been treated with clay caused water stress for the crops, which would explain the decrease in production.

An analysis of side chain interactions and pair correlations within antiparallel β-sheets : the differences between backbone hydrogen-bonded and non-hydrogen-bonded residue pairs

Cross-strand pair correlations are calculated for residue pairs in antiparallel β-sheet for two cases: pairs whose backbone atoms are hydrogen bonded together (H-bonded site) and pairs which are not (non-H-bonded site). The statistics show that this distinction is important. When glycine is located on the edge of a sheet, it shows a 3:1 preference for the H-bonded site. Thestrongest observed correlations are for pairs of disulfide-bonded cystines, many of which adopt a close-packed conformation with each cystine in a spiral conformation of opposite chirality to its partner. It is likely that these pairs are a signature for the family of small, cystine-rich proteins. Most other strong positive and negative correlations involve charged and polar residues. It appears that electrostatic compatibility is the strongest factor affecting pair correlation. Significant correlations are observed for β- and γ-branched residues inthe non-H-bonded site. An examination of the structures showsa directionality in side chain packing. There is a correlation between (1) the directionality in the packing interactions of non-H-bonded β- and γ-branched residue pairs, (2) the handedness of the observed enantiomers of chiral β-branched side chains, and (3) the handedness of the twist of β-sheet. These findings have implications for the formation of β-sheets during protein folding and the mechanism by which the sheet becomes twisted

Cell cycle sensing of oxidative stress in saccharomyces cerevisiae by oxidation of a specific cysteine residue in the transcription factor Swi6p

Yeast cells begin to bud and enter S phase when growth conditions are favourable during G1 phase. When subjected to some oxidative stresses, cells delay entry at G1 allowing repair of cellular damage. Hence, oxidative stress sensing is coordinated with the regulation of cell cycle. We identified a novel function of the cell-cycle regulator of Saccharomyces cerevisiae, Swi6p, as a redox sensor through its cysteine residue at position 404. When alanine was substituted at this position, the resultant mutant, C404A, was sensitive to several reactive oxygen species and oxidants including linoleic acid hydroperoxide, the superoxide anion and diamide. This mutant lost the ability to arrest in G1 phase upon treatment with lipid hydroperoxide. The Cys404 residue of Swi6p in wild-type cells was oxidised to a sulfenic acid when cells were subjected to linoleic acid hydroperoxide. Mutation of Cys404 to Ala abolished the down-regulation of expression of the G1 cyclin genes CLN1, CLN2, PCL1 and PCL2 that occurred when cells of the wild type were exposed to the lipid hydroperoxide. In conclusion, oxidative stress signaling for cell-cycle regulation occurs through oxidation of the G1/S-speicific transcription factor Swi6p and consequently leads to suppression of the expression of G1-cyclins and delay in cells entering the cell cycle.

Effect of temperature on anaerobic fermentation of banana stem residue

Anaerobic fermentation experiments were conducted on banana (pseudo) stem residue to study the relationship between fermentation temperature and gas production yield and gas production rate, and methane content. Based on fixed dry matter concentration, inoculum concentration and fermentation time, different temperatures, i.e. 25, 30, 35, 40°C were selected and formed four experimental groups. Four levels of single factor tests were conducted to optimize temperature parameter for anaerobic fermentation of banana stem residue. The results showed that the daily gas yield of banana stem residue reached the maximum value of 36.8L on the fourth day at 35°C, and the average gas yield was 5.03L/d. The total gas yield was 402.3L, while the maximum methane content was 61.2% in the whole fermentation process. The results indicated that the comprehensive effect was best at 35°C in anaerobic fermentation of banana stem residue.

Histological and global gene expression analysis of the ‘lactating’ pigeon crop

Background: Both male and female pigeons have the ability to produce a nutrient solution in their crop for the nourishment of their young. The production of the nutrient solution has been likened to lactation in mammals, and hence the product has been called pigeon ‘milk’. It has been shown that pigeon ‘milk’ is essential for growth and development of the pigeon squab, and without it they fail to thrive. Studies have investigated the nutritional value of pigeon ‘milk’ but very little else is known about what it is or how it is produced. This study aimed to gain insight into the process by studying gene expression in the ‘lactating’ crop.
Results: Macroscopic comparison of ‘lactating’ and non-’lactating’ crop reveals that the ‘lactating’ crop is enlarged and thickened with two very obvious lateral lobes that contain discrete rice-shaped pellets of pigeon ‘milk’. This was characterised histologically by an increase in the number and depth of rete pegs extending from the basal layer of the epithelium to the lamina propria, and extensive proliferation and folding of the germinal layer into the superficial epithelium. A global gene expression profile comparison between ‘lactating’ crop and non-’lactating’ crop showed that 542 genes are up-regulated in the ‘lactating’ crop, and 639 genes are down-regulated. Pathway analysis revealed that genes up-regulated in ‘lactating’ crop were involved in the proliferation of melanocytes, extracellular matrix-receptor interaction, the adherens junction and the wingless (wnt) signalling pathway. Gene ontology analysis showed that antioxidant response and microtubule transport were enriched in ‘lactating’ crop.
Conclusions: There is a hyperplastic response in the pigeon crop epithelium during ‘lactation’ that leads to localised cellular stress and expression of antioxidant protein-encoding genes. The differentiated, cornified cells that form the pigeon ‘milk’ are of keratinocyte lineage and contain triglycerides that are likely endocytosed as very low density lipoprotein (VLDL) and repackaged as triglyceride in vesicles that are transported intracellularly by microtubules. This mechanism is an interesting example of the evolution of a system with analogies to mammalian lactation, as pigeon ‘milk’ fulfils a similar function to mammalian milk, but is produced by a different mechanism.

Effects of high salt concentration and residue on copper and aluminum corrosion

Traditional researches on metal corrosion under salt solutions deposit conditions are usually carried out by visual, electron microscopic observations and simple electrochemical measurement via a traditional one-piece electrode. These techniques have difficulties in measuring localized corrosion that frequently occur in inhomogeneous media. This paper reports the results from the experiments using specially shaped coupons and a relatively new method of measuring heterogeneous electrochemical processes, namely, the wire beam electrode(WBE). Preliminary results from copper and aluminum corrosion in highly concentrated sodium chloride solutions with and without solid deposits show that the method is useful in simulating and studying corrosion especially localized corrosion in pipelines.

Was monochloramine responsible for widespread lettuce crop failures at a major recycled water irrigation scheme?

In 2008, vegetable growers observed stunted lettuce plants showing signs of chlorosis and wilting. It was suspected that monochloramine in the recycled water used for irrigation, in combination with extreme environmental conditions (high irrigation water salinity and extreme heat), was responsible for these crop failures. A series of glasshouse studies was conducted to evaluate the impact of monochloramine concentration alone on iceberg lettuce seedlings, as well as in combination with high salinity and hot ambient temperatures. Monochloramine concentrations up to 9 and 15 mg L−1 Cl2 for continuous and initial irrigation only, respectively, did not affect the weight of iceberg lettuce heads (p > 0.05), while the combination of monochloramine (4–5 mg L−1 Cl2) and salinity (3,500 μS cm−1) did not significantly affect harvest measurements (p > 0.05). We therefore conclude that it is unlikely that monochloramine was responsible for the observed crop failures.