Caracterização do fator de intensidade de tensão em corpos trincados através do método dos elementos finitos

The industry generally has sought materials with high mechanical resistance, low density, thermal stability and corrosion resistance. In the aerospace industry, for example, the use of aluminum alloys, such as Al 2024-T351 and Al 7075-T7351, have become essential. However, the use of these materials often do not resulted in a satisfactory performance of the component, since the presence of cracks can cause total rupture of the component, even with a tension below the yield stress of the material, unexpectedly. In this work, these aluminum alloys were analyzed and samples were modeled by the finite element method. Moreover, in the models were applied two different types of cracks, central and edge crack, a vertical force was applied to result in a tension 70% of the yield stress of the material analyzed. Through stress asymptotic distribution in the region near the crack tip were calculated the values of the stress intensity factors for each crack length, after the stress intensity factors characterized were compared graphically with the values of fracture toughness found in the available literature

Estudo das alterações das propriedades mecânicas em aço A-516 grau 70 soldado e submetido a tratamento térmico de alívio de tensões

Pressure vessels are equipments that require a great care because of their high cost and human life risk in case of fail, and its fabrication methods are different for each manufacturer. Normally, pressure vessels and its parts are fabricated by welding, which may change local properties of metals. The head of a pressure vessel is a very important structural component and it is fabricated by welding and mechanical conformation. Because its excellent mechanical properties, de steel A-516 Grade 70 is often used in manufacturing of large pressure vessels that are subjected to high pressure and temperature, but was verified that its mechanical resistance is decreased when submitted to a tension relief heat treatment. By experience it was defined that before mechanical conformation of the head of a large pressure vessel, the steel should be submitted to a stress relief heat treatment in order to facilitate the mechanical conformation, but there is no quantitative analysis to prove this method and study its possible risks. In the present work the steel A-516 Grade 70 demonstrated a decrease of its mechanical resistance when submitted to a stress relief heat treatment, but keeping above the minimum limit defined in the literature. By other side its ductility was substantially increased, being possible to deduce that the stress relief heat treatment before mechanical conformation is a viable e recommended technique, but with reservations. With the data acquired during the fabrication e preparation of the specimen and the result of the tests, it was possible to elaborate a welding procedure that provides the same results obtained in this present work

Efeito das dimensões dos corpos de prova na resistência à flexão de compósitos restauradores

The aim of this study was to evaluate the influence of specimen size, in comparison with the ISO Standard, on the three point flexural strength of resin composite restorative materials Filtek Supreme and Filtek Z-250. Forty specimens were fabricated for each material with the following length, width and thickness measurements (n = 10): 1) 20 × 2 × 2 mm (ISO 4049); 2) 10 × 2 × 1 mm; 3) 10 × 1 × 1 mm; 4) 8 × 0.8 × 0.8 mm. The composites were inserted in a single increment into two-piece metal device and light-polymerized. The specimens were dry stored at 37 ± 1 °C and protected from light for 7 days. After this period, flexural strength was measured by three-point flexure test using MTS 810 equipment, with a load cell of 10 kN at a speed of 0.5 mm/min. For the evaluated sizes, the results showed significant variability (p = 0.00) with values when compared with the ISO Standard (116.700 MPa), being statistically higher for the test specimens measuring 10 × 1 × 1 mm (142.530 MPa), similar for those of 10  ×  2  ×  1  mm (115.815 MPa) and lower for those of 8 × 0.8 × 0.8 mm (86.650 MPa). There was statistical equality (p = 0.08) for the studied composites (Filtek Supreme, 125.270 MPa; Filtek Z-250, 108.130 MPa). Specimens measuring 10 × 2 × 1 mm provided flexural strength values equivalent to those obtained in the sizes recommended by the ISO 4049 standard, with lower consumption of material, energy and time.

Prevalência de alterações locais e sistêmicas em indivíduos com disfunção temporomandibular

Temporomandibular disorder describes a variety of conditions including joint and muscle in the stomatognathic system, characterized by pain, TMJ sounds, functions irregular jaw and represent the leading cause of nondental pain in the orofacial region. The objective of this research was to evaluate the prevalence of ophthalmological, otological and cognitive-behavioral changes, parafunctional habits in individuals with temporomandibular disorders (TMD). A total of 117 medical records of female and male individuals, aged 18 to 60 years, from the Occlusion, Temporomandibular Dysfunction and Orofacial Pain of the Ribeirão Preto School of Dentistry – USP, between 2010 and 2011. The anamnesis index proposed by Helkimo was used to classify the individuals according to TMD severity degree and to divide them into two groups: AiI (mild to moderate) with 69 individuals and AiII (severe) with 48 individuals. The groups were then subdivided with respect to gender (72.64% female and 27.36% male) and age. There was predominance in the 18-40 year age group (60.68%) when compared to the 41-60 year age group (39.32%). Data were collected through an interview with questions about the presence of parafunctional habits, otological, ophthalmological and behavioral changes. Data were subjected to the statistical analysis using the Kruskal-Wallis test. The prevalence of each change was also evaluated. The results showed statistically significant for all groups according to gender, age and degree of severity. Individuals with temporomandibular disorders exhibited high prevalence of systemic and local dysfunctions.

Corpos (con) sentidos: cartografando processos de subjetivação de produto(re)s de corporalidades singulares

Pós-graduação em Psicologia - FCLAS

Entre a individualização e a multiplicidade: possibilidades de rupturas com os modos de gestão e administração dos corpos infantis

Placing the management of childhood forms considered at risk, we discuss the operation of a welfare institution and its effects on the subjective process. Created to manage the virtues of the poor behavior of children, makes visible to the way technology features disciplinary policies: surveillance is evident of cameras, high walls, electric fences and in the eyes of educators, the penalty stands normalizing practices corrective aimed at standardization bodies, educational meetings are compared to the examination, as they produce dossiers of individual behavior, emphasizing characteristics that are considered dangerous anticipates the administration and production of docile individuals, useful, productive, applying identity models. Following the lines of knowledge and power relations that constitute this space, we used the genealogy in the analysis of discursive practices that cross society in its historical construction, the genealogy allows us to achieve these movements in the consolidation process of the government of life, and also, the deconstruction of hegemonic practices. In an attempt to escape the set, we propose the realization of artistic and cultural activities within a process of collective construction as a strategy of resistance and confrontation with the dominant logic, consolidating practices that favor the enhancement of life in its manifold possibilities.

Torres de extensões abelianas de grau primo ímpar não ramificado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da maturidade pulmonar de cordeiros nascidos a termo e prematuros pela análise citológica, Test de Clements e contagem de corpos lamelares do líquido amniótico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spectrum generating algebra for the pure spinor superstring

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

As dimensões geográficas dos Arranjos Produtivos Locais

This article aims to further discuss the Local Productive Arrangements (APLs), considering some geographical visions thinking about spatial configuration and the economic and social processes that characterize them, configuring a wide range of territorialities and productive territories that mark the landscape current Brazilian. In this sense, APLs are present today in both the figure of those who study analytical concept for regional development, and as a public policy supporting networks and supply chains in their territorial bases, especially small businesses. Thus, this arrangements can be read, geographically, as territorial productive specializations that are configured in spatial circuits of production, integrated with other regions, localities and supply chains through the morphology of networks and districts and grounded in networks of urban networks of material and immaterial flows which are bringing urban centers of different sizes. Considering the multidimensionality of the subject, the clusters have certain weaknesses in terms of their assumptions and perspectives, especially the limitations of the tool if designed just for resources and policies applied at the local level. Suggest the approach of a "geography of APLs" is to seek treat it from a territorial and socio reading.

Critérios técnicos e de participação social para a recuperação florestal: quais as diferenças na definição de áreas prioritárias?

The Jararaca River Basin suffers significative environmental impacts caused by inaccurate land use. In Brazil, the areas for permanent preservation are defined and protected by the 2012 Federal Law 12.651. These areas are located in the bank side and other specific places. The objective of this paper was to analyze the results of possible alternatives in function of different procedures used in the proposal elaboration. The methodology used was the elaboration of a priority map for the recovery of these areas using the Geographic Information System with multicriterial analyses and comparing it with the guidelines from the Jararaca River Basin Management Plan. As a result, there were identified differences in the priorities defined by technical issues from the priorities defined by public consultation process.

Higher spin constraints and the super (W∞/2 ⊕ W1+∞/2) algebra in the super eigenvalue model

We show that the partition function of the super eigenvalue model satisfies, for finite N (non-perturbatively), an infinite set of constraints with even spins s = 4, 6, . . . , ∞. These constraints are associated with half of the bosonic generators of the super (W∞/2 ⊕ W1+∞/2) algebra. The simplest constraint (s = 4) is shown to be reducible to the super Virasoro constraints, previously used to construct the model.

Dynamical algebra of quasi-exactly-solvable potentials

We show that by using second-order differential operators as a realization of the so(2,1) Lie algebra, we can extend the class of quasi-exactly-solvable potentials with dynamical symmetries. As an example, we dynamically generate a potential of tenth power, which has been treated in the literature using other approaches, and discuss its relation with other potentials of lowest orders. The question of solvability is also studied. © 1991 The American Physical Society.

Flattening of the resonance spectrum of hadrons from κ-deformed Poincaré algebra

Recently Lukierski et al. [1] defined a κ-deformed Poincaré algebra which is characterized by having the energy-momentum and angular momentum sub-algebras not deformed. Further Biedenharn et al. [2] showed that on gauging the κ-deformed electron with the electromagnetic field, one can set a limit on the allowed value of the deformation parameter ∈ ≡ 1/κ < 1 fm. We show that one gets Regge like angular excitations, J, of the mesons, non-strange and strange baryons, with a value of ∈ ∼ 0.082 fm and predict a flattening with J of the corresponding trajectories. The Regge fit improves on including deformation, particularly for the baryon spectrum.

Dinâmica secular rotacional de corpos tri-axiais: expansão de V em ressonâncias de primeira ordem

Consider a finite body of mass m (C1) with moments of inertia A, B and C. This body orbits another one of mass much larger M (C2), which at first will be taken as a point, even if it is not completely spherical. The body C1, when orbit C2, performs a translational motion near a Keplerian. It will not be a Keplerian due to external disturbances. We will use two axes systems: fixed in the center of mass of C1 and other inertial. The C1 attitude, that is, the dynamic rotation of this body is know if we know how to situate mobile system according to inertial axes system. The strong influence exerted by C2 on C1, which is a flattened body, generates torques on C1, what affects its dynamics of rotation. We will obtain the mathematical formulation of this problem assuming C1 as a planet and C2 as the sun. Also applies to case of satellite and planet. In the case of Mercury-Sun system, the disturbing potential that governs rotation dynamics, for theoretical studies, necessarily have to be developed by powers of the eccentricity. As is known, such expansions are delicate because of the convergence issue. Thus, we intend to make a development until the third order (superior orders are not always achievable because of the volume of terms generated in cases of first-order resonances). By defining a modern set of canonical variables (Andoyer), we will assemble a disturbed Hamiltonian problem. The Andoyer's Variables allow to define averages, which enable us to discard short-term effects. Our results for the resonant angle variation of Mercury are in full agreement with those obtained by D'Hoedt & Lemaître (2004) and Rambaux & Bois (2004)