Tendon regeneration through a scaffold-free approach: development of tenogenic magnetic hASCs sheets

Tendon's regeneration is limited, demanding for cell-based strategies to fully restore their functionality upon injury. The concept of magnetic force-based TE(1), generally using magnetic nanoparticles may enable, for example, stem cell stimulation and/or remote control over TE constructs. Thus, we originally propose the development of magnetic cell sheets (magCSs) with tenogenic capability, aimed at promoting tendon's regeneration. A Tenomodulin (TNMD+) subpopulation was sorted from human adipose stem cells (hASCs), using TNMD-coated immunomagnetic beads(2) and used as cell source for the development of magCSs. Briefly, cells were labeled with iron oxide composite particles (Micromod) and cultured for 7 days in α-MEM medium with or without magnetic stimulation provided by a magnetic device (nanoTherics). CSs were retrieved from the plates using magnet attraction as contiguous sheets of cells within its own deposited ECM.

A model to simulate the moment-rotation and crack width of FRC members reinforced with longitudinal bars

The present work describes a model for the determination of the moment–rotation relationship of a cross section of fiber reinforced concrete (FRC) elements that also include longitudinal bars for the flexural reinforcement (R/FRC). Since a stress–crack width relationship (σ–w)(σ–w) is used to model the post-cracking behavior of a FRC, the σ–w directly obtained from tensile tests, or derived from inverse analysis applied to the results obtained in three-point notched beam bending tests, can be adopted in this approach. For a more realistic assessment of the crack opening, a bond stress versus slip relationship is assumed to simulate the bond between longitudinal bars and surrounding FRC. To simulate the compression behavior of the FRC, a shear friction model is adopted based on the physical interpretation of the post-peak compression softening behavior registered in experimental tests. By allowing the formation of a compressive FRC wedge delimited by shear band zones, the concept of concrete crushing failure mode in beams failing in bending is reinterpreted. By using the moment–rotation relationship, an algorithm was developed to determine the force–deflection response of statically determinate R/FRC elements. The model is described in detail and its good predictive performance is demonstrated by using available experimental data. Parametric studies were executed to evidence the influence of relevant parameters of the model on the serviceability and ultimate design conditions of R/FRC elements failing in bending.

Using customer lifetime value to improve the prediction of bank deposit subscription in telemarketing campaigns

Customer lifetime value (LTV) enables using client characteristics, such as recency, frequency and monetary (RFM) value, to describe the value of a client through time in terms of profitability. We present the concept of LTV applied to telemarketing for improving the return-on-investment, using a recent (from 2008 to 2013) and real case study of bank campaigns to sell long- term deposits. The goal was to benefit from past contacts history to extract additional knowledge. A total of twelve LTV input variables were tested, un- der a forward selection method and using a realistic rolling windows scheme, highlighting the validity of five new LTV features. The results achieved by our LTV data-driven approach using neural networks allowed an improvement up to 4 pp in the Lift cumulative curve for targeting the deposit subscribers when compared with a baseline model (with no history data). Explanatory knowledge was also extracted from the proposed model, revealing two highly relevant LTV features, the last result of the previous campaign to sell the same product and the frequency of past client successes. The obtained results are particularly valuable for contact center companies, which can improve pre- dictive performance without even having to ask for more information to the companies they serve.

Step towards of a homemade business intelligence solution: A case study in textile industry

Nowadays, organizations are increasingly looking to invest in business intelligence solutions, mainly private companies in order to get advantage over its competitors, however they do not know what is necessary. Business intelligence allows an analysis of consolidated information in order to obtain more specific outlets and certain indications in order to support the decision making process. You can take the right decision based on the data collected from different information systems present in the organization and outside of them. The textile sector is a sector where concept of Business Intelligence it is not many explored yet. Actually there are few textile companies that have a BI platform. Thus, the article objective is present an architecture and show all the steps by which companies need to spend to implement a successful free homemade Business Intelligence system. As result the proposed approach it was validated using real data aiming assess the steps defined.

Analysis and selection of indicators for a sustainability assessment method for school buildings based on SBTool ‐ PT

Nowadays, the sustainability of buildings has an extreme importance. This concept goes towards the European aims of the Program Horizon 2020, which concerns about the reduction of the environmental impacts through such aspects as the energy efficiency and renewable technologies, among others. Sustainability is an extremely broad concept but, in this work, it is intended to include the concept of sustainability in buildings. Within the concept that aims the integration of environmental, social and economic levels towards the preservation of the planet and the integrity of the users, there are, currently, several types of tools of environmental certification that are applicable to the construction industry (LEED, BREEAM, DGNB, SBTool, among others). Within this context, it is highlighted the tool SBTool (Sustainable Building Tool) that is employed in several countries and can be subject to review in institutions of basic education, which are the base for the formation of the critical masses and for the development of a country. The main aim of this research is to select indicators that can be used in a methodology for sustainability assessment (SBTool) of school buildings in Portugal and in Brazil. In order to achieve it, it will also be analyzed other methodologies that already incorporate parameters directly related with the schools environment, such as BREEAM or LEED.

Re-Design of ribbon for new applications

O conceito de qualidade de vida surge pela primeira vez em 1920, através do economista inglês Arthur Cecil Pigou, que utiliza este termo para descrever o impacto governamental sobre a vida das pessoas mais desfavorecidas. Com a instalação de uma era industrializada e com o fim da 2º Guerra Mundial, a sociedade mudou de paradigma e iniciou uma procura incessante de formas para melhorar a sua qualidade de vida. Este conceito desenvolve-se juntamente com o desenvolvimento do conceito de educação, saúde, habitação, transporte, trabalho e lazer, bem como indicadores do aumento da esperança de vida, a diminuição da mortalidade infantil e dos níveis de poluição. O avanço da tecnologia teve um papel fundamental para a evolução desses conceitos, bem como o Design na procura de soluções para aplicação dessas mesmas tecnologias. No caso concreto da indústria tèxtil, a tendência é o desenvolvimento de têxteis inteligentes envolvendo a engenharia electrónica no seu processo de conceptualização e de fabrico. A chamada tecnologia wearable abre novos horizontes para a criação de soluções inovadoras, abrindo novos nichos de mercado com elevado valor acrescentado. Existem atualmente vários produtos no mercado cuja funcionalidade e utilidade lhes conferiu um estatuto imutável ao longo dos anos, onde a evolução não avançou na tendência atual. Esse é o caso dos tecidos estreitos, cuja funcionalidade poderá adquirir novas capacidades e ser utilizada em diferentes componentes têxteis nas mais variadas áreas. Essas capacidades poderão ser acrescentadas pela incorporação de materiais com luminosidade (Led’s e L-Wire) nas suas estruturas. Neste estudo realizado o design de produtos com novas funcionalidades, adaptando as tecnologias até agora desenvolvidas em novas soluções e/ou novas recriações de produto.

Review of robotic technology for keyhole transcranial stereotactic neurosurgery

The research of stereotactic apparatus to guide surgical devices began in 1908, yet a major part of today's stereotactic neurosurgeries still rely on stereotactic frames developed almost half a century ago. Robots excel at handling spatial information, and are, thus, obvious candidates in the guidance of instrumentation along precisely planned trajectories. In this review, we introduce the concept of stereotaxy and describe a standard stereotactic neurosurgery. Neurosurgeons' expectations and demands regarding the role of robots as assistive tools are also addressed. We list the most successful robotic systems developed specifically for or capable of executing stereotactic neurosurgery. A critical review is presented for each robotic system, emphasizing the differences between them and detailing positive features and drawbacks. An analysis of the listed robotic system features is also undertaken, in the context of robotic application in stereotactic neurosurgery. Finally, we discuss the current perspective, and future directions of a robotic technology in this field. All robotic systems follow a very similar and structured workflow despite the technical differences that set them apart. No system unequivocally stands out as an absolute best. The trend of technological progress is pointing toward the development of miniaturized cost-effective solutions with more intuitive interfaces.

Development of a thermoelectric generator for the exhaust of a vehicle

Dissertação de mestrado integrado em Engenharia Mecânica

A survey of distributed data aggregation algorithms

Distributed data aggregation is an important task, allowing the de- centralized determination of meaningful global properties, that can then be used to direct the execution of other applications. The resulting val- ues result from the distributed computation of functions like count, sum and average. Some application examples can found to determine the network size, total storage capacity, average load, majorities and many others. In the last decade, many di erent approaches have been pro- posed, with di erent trade-o s in terms of accuracy, reliability, message and time complexity. Due to the considerable amount and variety of ag- gregation algorithms, it can be di cult and time consuming to determine which techniques will be more appropriate to use in speci c settings, jus- tifying the existence of a survey to aid in this task. This work reviews the state of the art on distributed data aggregation algorithms, providing three main contributions. First, it formally de nes the concept of aggrega- tion, characterizing the di erent types of aggregation functions. Second, it succinctly describes the main aggregation techniques, organizing them in a taxonomy. Finally, it provides some guidelines toward the selection and use of the most relevant techniques, summarizing their principal characteristics.

BIOMedical search engine framework: lightweight and customized implementation of domain-specific biomedical search engines

The Smart Drug Search is publicly accessible at http://sing.ei.uvigo.es/sds/. The BIOMedical Search Engine Framework is freely available for non-commercial use at https://github.com/agjacome/biomsef

Evaluation of the Medical Care of Patients with Hypertension in an Emergency Department and in Ambulatory Hypertension Unit

OBJECTIVE: To evaluate the characteristics of the patients receiving medical care in the Ambulatory of Hypertension of the Emergency Department, Division of Cardiology, and in the Emergency Unit of the Clinical Hospital of the Ribeirão Preto Medical School. METHODS: Using a protocol, we compared the care of the same hypertensive patients in on different occasions in the 2 different places. The characteristics of 62 patients, 29 men with a mean age of 57 years, were analyzed between January 1996 and December 1997. RESULTS: The care of these patients resulted in different medical treatment regardless of their clinical features and blood pressure levels. Thus, in the Emergency Unit, 97% presented with symptoms, and 64.5% received medication to rapidly reduce blood pressure. In 50% of the cases, nifedipine SL was the elected medication. Patients who applied to the Ambulatory of Hypertension presenting with similar features, or, in some cases, presenting with similar clinically higher levels of blood pressure, were not prescribed medication for a rapid reduction of blood pressure at any of the appointments. CONCLUSION: The therapeutic approach to patients with high blood pressure levels, symptomatic or asymptomatic, was dependent on the place of treatment. In the Emergency Unit, the conduct was, in the majority of cases, to decrease blood pressure immediately, whereas in the Ambulatory of Hypertension, the same levels of blood pressure, in the same individuals, resulted in therapeutic adjustment with nonpharmacological management. These results show the need to reconsider the concept of hypertensive crises and their therapeutical implications.

El valor razonable como concepto vinculado a la pertinencia del valor. Fair value as a concept related to value relevance.

IDENTIFICACIÓN Y CARACTERIZACIÓN DEL PROBLEMA - HIPÓTESIS Según la NIC 39, el valor razonable es la cantidad por la que puede ser intercambiado un activo o cancelado un pasivo entre un comprador y un vendedor interesados y debidamente informados, en condiciones de independencia mutua. La definición del FASB (SFAC 7) es muy similar, y define el valor razonable como el monto mediante el que un activo podría ser enajenado en una transacción entre partes independientes, dispuestas a realizar la operación en situaciones diferentes a la de una liquidación o a la de una venta forzada. Puede apreciarse que esta definición de valor razonable es limitada porque, a excepción de escenarios que se correspondan con mercados perfectos y completos, el concepto puede abarcar valores de entrada, valores de salida y valores en uso, los cuales pueden ser muy diferentes (Beaver, 1987). El valor de entrada es el valor de adquisición o de reemplazo, el valor de salida es el precio al cual un activo puede ser vendido o liquidado, y el valor en uso es el valor incremental de una empresa atribuible a un activo (se correspondería con el valor presente mencionado anteriormente). Dado que el IASB y la FASB se ocupan de la valuación de activos que una empresa posee, y no de activos que serán adquiridos en un futuro, su definición de valor razonable debería ser interpretada desde la perspectiva del vendedor. Por lo tanto, el concepto de valor razonable que manejan el IASB y la FASB se asemeja a un valor de salida, tal como lo propusieron Chambers y Stirling hace bastantes años atrás.Planteado esto, lo que tratará de dilucidar este proyecto de investigación es si este concepto de valor razonable es realmente novedoso o es una simple regresión a los valores corrientes de salida defendidos por los autores de la década del setenta. OBJETIVOS GENERALES Y ESPECÍFICOS General Analizar si el concepto “valor razonable” tal como es definido por la normativa actual se corresponde con una definición novedosa o es una adaptación/modificación/regresión de conceptos ya existentes (valores corrientes de salida). Específicos Revisar la literatura específica desde el punto de vista de la teoría contable y las normas de las que dispone la profesión referidas a los siguientes aspectos: a) Valores corrientes b) Valor razonable MATERIALES Y MÉTODOS El análisis que se llevará a cabo comprenderá dos aspectos. El primero consiste en la revisión de la doctrina contable. Para ello se analizará bibliografía significativa y trabajos de eventos académicos relacionados con el valor razonable. En segundo término se revisará la normativa profesional a nivel nacional e internacional. Después de concluido con los pasos anteriores se analizará la novedad del concepto valor razonable y su semejanza con el valor corriente de salida planteado por los autores de la década del setenta. IMPORTANCIA DEL PROYECTO – IMPACTO Se pretende revisar si el concepto valor razonable planteado por la normativa actual resulta realmente novedoso o es una adaptación de viejos conceptos planteados en la década del setenta del siglo pasado. El proyecto resulta importante porque es un tema no desarrollado en la literatura, ni planteado en congresos. Se estima lograr material de publicación y presentación en eventos académicos. According to the NIC 39, fair value is the quantity for the one that can be exchanged an asset or cancelled a liability between a buyer and a seller interested and due informed, in conditions of mutual independence. The definition of the FASB (SFAC 7) is very similar, and defines fair value as the amount by means of which an assets might be alienated in a transaction between independent parts, ready to realize the operation in situations different from that of a liquidation or to that of a forced sale. This definition of reasonable value is limited because, with the exception of scenes that fit with perfect and complete markets, the concept can include values of entry, values of exit and values in use, which can be very different (Beaver, 1987). The value of entry is the value of acquisition or of replacement, the value of exit is the price to which an asset can be sold or liquidated, and the value in use is the incremental value of a company attributable to an asset. Provided that the IASB and the FASB deal with the appraisal of assets that a company possesses, and not of assets that will be acquired in a future, this definition of fair value should be interpreted from the perspective of the seller. Therefore, the concept of reasonable value that they handle the IASB and the FASB is alike a value of exit, as Chambers and Stirling proposed it enough years ago behind. We will review if the concept of "fair value" is really new or if it is an adaptation of old concepts.

Socially integrative customer service (SICS) : identification of a symbiotic link with corporate social responsibility

The aim of this study is to answer the research question "can customer service be revitalised through identification of a symbiotic relationship with social responsibility, linked by people-centricity?" The concept of customer service remains weak and there has been a lack of attention to the underlying purpose: "to serve". To strengthen the theory the humanistic nature of the concept should be revised. Fundamental to this argument is the question of who is a customer? To fully discover the scope of the concept requires a broader or more specifically a societal view. Herein the theme of social corporate responsibility is critical to the recognition of the customer service network (CSN). This suggestion in isolation is useful but structural. Another aspect must be identified to validate the "service" ethos. Through this reasoning the relational theme (RT) provides for a mechanism for this to be achieved. Therefore the theory of socially integrative customer service is based on broadening and deepening the customer service concept. This study is illustrated in the context of the grocery retail sector in the Republic of Ireland. Four case studies are presented, three based on company-wide and in-store research and a fourth is a cross-company study. Results across companies indicate acceptance of the research question and show evidence to validate SICS. There is scope to further develop SICS and to build on the CSN and the RT. Finally the concept of SICS provides for a diverse basis for further research. This theory does no purport to cause a paradigm shift but does add innovation to the body of knowledge. As is the hallmark of good theoretical development, the author has aimed to keep the philosophy simple.

Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.

Protective Effect of Aortic Stenosis on the Coronary Arteries. Hypothetic Considerations to an Old Enigma

Abstract A literature overview of angiographic studies has shown that the prevalence of significant coronary disease in patients with aortic stenosis (AS) varies from 20 to 60%. Early necropsy studies suggested that patients with AS had a lower than expected incidence of coronary artery disease (CAD), originating the concept of a protective effect of AS on the coronary arteries. The myth of AS protection against CAD would be better explained as endothelium-myocardial interaction (crosstalk) protection triggered by left ventricular overload. Therefore, the cGMP/NO pathway induced by the AS overload pressure would explain the low incidence of CAD, which is compatible with the amazing natural long-term evolution of this cardiac valve disease.