Effects of electroplated zinc-nickel alloy coatings on the fatigue strength of AISI 4340 high-strength steel

Recovered substrates have been extensively used in the aerospace field. Cadmium electroplating has been widely applied to promote protective coatings in aeronautical components, resulting in excellent corrosion protection combined with a good performance in cyclic loading. Ecological considerations allied to the increasing demands for corrosion resistance have resulted in the search for possible alternatives. Zinc-nickel (Zn-Ni) alloys have received considerable interest recently, because these coatings show advantages such as a good resistance to white and red rust, high plating rates, and acceptance in the market. In this study, the effect of electroplated Zn-Ni coatings on AISI 4340 high-strength steel was analyzed for rotating bending fatigue strength, corrosion, and adhesion resistance. The compressive residual stress field was measured by x-ray diffraction prior to fatigue tests. Optical microscopy documented coating thickness, adhesion characteristics, and coverage extent for nearly all substrates. Fractured fatigue specimens were investigated using scanning electron microscopy (SEM). Three different Zn-Ni coating thicknesses were tested, and comparisons with the rotating bending fatigue data from electroplated Cd specimens were performed. Experimental results differentiated the effects of the various coatings on the AISI 4340 steel behaviour when submitted to fatigue testing and the influence of coating thickness on the fatigue strength.

Improvement in the fatigue strength of chromium electroplated AISI 4340 steel by shot peening

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The surface treatment influence on the fatigue crack propagation of Al 7050-T7451 alloy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of WC-10%Co-4%Cr coating on the Ti-6Al-4V alloy fatigue strength

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evaluation of WC-10Ni thermal spraying coating by HVOF on the fatigue and corrosion AISI 4340 steel

Shot peening is a surface process widely used to improve the fatigue strength of materials, through compressive residual stresses induced in their surface layers. Considering mechanical components for high responsible applications, wear and corrosion control is currently accomplished by the use of coated materials.In the case of chrome plating or hard anodizing, lower fatigue strength in comparison to uncoated parts are associated to high residual tensile stresses and microcracks density. Under constant or variable amplitude loading microcracks will propagate and cross the interface coating substrate without impediment.The aim of the present study is to analyze the influence of WC-10Ni coating applied by HVOF process on the axial fatigue strength of AISI 4340 steel. The shot peening effect on the fatigue performance of coated AISI 4340 steel was also evaluated. The fractured fatigue specimens were investigated using a scanning electron microscope in order to obtain information about the crack initiation points. (C) 2010 Published by Elsevier Ltd.

Evaluation of WC-10Ni thermal spray coating with shot peening on the fatigue strength of AISI 4340 steel

Fatigue failure is a result of a crack initiation and propagation, in consequence of a cyclical load. In aeronautical components as landing gear the fatigue strength is an important parameter to be considered in project, as well as the corrosion and wear resistance.The thermal sprayed HVOF technology it's normally used to protect components against wear and corrosion, and are being considerate an alternative to replace chromium by the aeronautical industry. With respect to fatigue life, the HVOF technique induces residual stress on the interface. In the case of tensile residual stresses, the initiation and propagation phases of fatigue process are accelerated; on the other hand, compressive residual stresses close to the surface may increase fatigue life. The technique to improve the coated materials fatigue strength is the shot peening process, which induces residual stress in the surface in order to delay the nucleation and propagation process.The aim of present study is to compare the influence of WC-10 Ni coating applied by HVOF on the fatigue strength of AISI 4340 steel, with and without shot peening. S-N curves were obtained in axial fatigue tests for material base, and tungsten carbide coated specimens. (C) 2010 Published by Elsevier Ltd.

Fatigue in AISI 4340 steel thermal spray coating by HVOF for aeronautic application

Currently, high-strength materials, particularly AISI 4340 steel, are used in several landing gear components. Due to the high resistance to wear and corrosion required, the components are usually coating by hard chromium. This treatment produces waste, such as Cr+ 6 (hexavalent chromium), generally after applying the coating of hard chromium which is harmful to health and the environment. The process HVOF (High-velocity-oxygen-fuel) is considered a promising technique for deposition of hard chromium alternative coatings, for example, coatings based on tungsten carbide. This technique provides high hardness and good wear strength and more resistance to fatigue when compared to AISI 4340 hard chromium coated. To minimize loss fatigue due to the process of deposition, shot peening is used to obtain a compressive residual stress. The aim of this study was to analyze the effects of the tungsten carbide thermal spray coating applied by the HVOF, in comparison to the conventional hard chromium electroplating on the AISI 4340 high strength steel behavior in fatigue. Optical microscopy and scanning electron microscopy were used to observe crack origin sites, thickness and adhesion of the coating. (C) 2010 Published by Elsevier Ltd.

An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel

Shot peening is a method widely used to improve the fatigue strength of materials. through the creation of a compressive residual stress field (CRSF) in their surface layers. In the present research the gain in fatigue life of AISI 4340 steel, Used in landing gear. is evaluated under four Shot peening conditions. Rotating bending fatigue tests were conducted and the CRSF was measured by an X-ray tensometry prior and during fatigue tests. It was observed that relaxation of the CRSF occurred due to the fatigue process. In addition, the fractured fatigue specimens were investigated using a scanning electron microscope in order to obtain information about the crack initiation points. The evaluation of fatigue life, relaxation of CRSF and crack sources are discussed. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

New geopolymeric binder based on fluid catalytic cracking catalyst residue (FCC)

This paper provides information about the synthesis and mechanical properties of geopolymers based on fluid catalytic cracking catalyst residue (FCC). FCC was alkali activated with solutions containing different SiO2/Na2O ratios. The microstructure and mechanical properties were analysed by using several instrumental techniques. FCC geopolymers are mechanically stable, yielding compressive strength about 68 MPa when mortars are cured at 65 degrees C during 3 days. The results confirm the viability of producing geopolymers based on FCC. (C) 2012 Elsevier B.V. All rights reserved.

A doença como ponto de mutação :os processos de significação em mulheres portadores de lúpus eritematoso sistêmico

Systemic lupus erythematous (SLE) is a chronic and auto-immune disease that can affect several systems of one´s body, including the nervous system, causing several clinical evidences, which can put in risk the person´s life. Although the illness could manifest itself at any age or sex, studies indicate higher incidence among women. Its etiology points to the combination of genetic, hormonal and environmental factors. Due to the disease´s complexity, it is evident that it affects all the person´s life as a whole and not only its organic dimension. It is believed that the signification attributed to all the process of sickening influences its treatment, as well as the person´s capacity to cope with the difficulties and implicit profits involved in the process.In this study, eight women who were affected by SLE were interviewed, with the aim of examining carefully the processes of signification as well as the generation of meanings which permeate these women´s sickening processes. The analysis of their speeches evidences distinct forms of giving meaning to the process, regardless of the time of the diagnosis. The fact that the disease is incurable was shocking to all the participants, and it demanded changes in their lives, in order to detain a relative control of their condition. The majority of the participants were able to deal with these modifications, since strategies have been created to face the difficulties and thus to preserve their social life, without damaging their health. However, some of the participants did not obtain strenght to cope with the disease, eventually developing a depressive state. It is observed that not only SLE has innumerable ways of manifestation, but the experience of the illness is very subjective and dynamic. There are also several ways of expressing this experience, according to the implications in the social, cultural and economic context where the participants are inserted. This ratifies the necessity of a interdisciplinary approach to embrace SLE complexity. (310 words, 1.610 characters)

Desenvolvimento de misturas ternárias para remoção de reboco de fluido de perfuração sintético

The construction of wells is one of the most important activities of the oil industry. The drilling process is the set of activities and operations to design, program and perform the opening thereof. During this process, the cuttings are removed by the drilling fluid, or mud, and carted to the surface. This fluid is injected into the drill string and returns to the surface through the annular space between the well walls and the drill string. After the descent of the column casing, the annular space between the casing string and the walls of the borehole is filled with cement so as to secure the spine and prevent any migration of fluids between the various permeable zones traversed by the well behind of the coating. To ensure the good quality of the cementation scrubbers are used mattresses which are pumped ahead of the cement slurry so as to avoid contamination of the drilling fluid paste, or vice versa, and assist in the removal of plaster, formed by drilling fluid of the borehole walls, thus enabling a better cement bond to the well. Within this context, this work aims to evaluate the efficiency of mattresses scrubbers, the basis of ionic and nonionic surfactants, on the removal of nonaqueous drilling fluid, based on n-paraffin in oil wells, and the compatibility between the Mattress relations washer / drilling fluid bed scrubber / cement paste mattress washer / cement slurry / drilling fluid and the drilling fluid / cement slurry using laboratory tests rheology, thickening time and compressive strength. Also technique was performed X-ray diffraction (XRD) for a more detailed analysis of these mixtures with hydrated cement paste. In compatibility tests the conditions of temperature and pressure used in the same laboratory procedure simulating the conditions of oil wells, the well is considered the depth of 800 m. The results showed that the compositions of the mattress washer nonionic, KMS obtained a 100% efficient in removing the non-aqueous drilling fluid, and the best formulation showed good results with respect to compliance testing

Desafios e limites da prática do sindicalismo rural :um estudo de caso em São Paulo do Potengi/RN

The dissertation analyzes how the syndical practice of the workers rural Brazilians works your aspects of mobilization and claim in front of the execution of attendance services and providences, instituted in the marks of the military dictatorship, in the decade of 1970. We try to apprehend how these services have been interfering in the development of base works. Considering base works, as an enduring political formation of the rural workers, formation of new syndical leaderships and an effect participation of the workers in the political spaces. We trace the path of the rural workers' organization, starting from the previous period to the military stroke of 1964, while protagonists inserted in the national political conjuncture, organizing fight fronts and conquering rights. The research reveals that the rural workers' syndical movement, when it develops the activities coming from Funrural, established in 1971, they confront a dilemma that go through the political nature of your practice, which such activities can reduce the syndical rural workers, to a antity of assistance, and so interfere in the accomplishment of base works with the rural working class. The rural workers' syndical movement, inserted in the several conjunctures, since of your emersion in ante-64, when they have passed by growth and retrocession, they built along this period a structure to the national level, which makes possible the recognition of the rural workers' organization, as a class, and human being politicians of your own structure. It is in this context that the syndical practice is analyzed, emphasizing your limits and your possibilities while policy strenght nationally constituted

Intestinal healing in rats submitted to ethanol ingestion

OBJETIVO: Estudar o efeito do alcoolismo no processo de cicatrização intestinal e suas complicações pós-operatórias em ratos. MÉTODOS: Cento e sessenta ratos foram divididos em dois grupos: tratado e controle. O controle recebeu água, enquanto o tratado etanol a 30%. Após 180 dias foram realizadas colotomia, seguida de anastomose. Após os animais foram divididos em quatro subgrupos de 20 ratos para estudo nos seguintes momentos: 4º, 7º, 14º e 21º pós-operatório. Os parâmetros analisados foram: ganho de peso, força de ruptura, hidroxiprolina tecidual, complicações pós-operatórias e estudo histopatológico. RESULTADOS: O ganho de peso foi superior no grupo controle (p<0,05). Após agrupamento dos momentos a força de ruptura foi superior no controle (p<0,05). Não houve diferença quanto à histopatologia e hidroxiprolina. Houve cinco infecções de incisão no grupo tratado, enquanto no controle ocorreram duas (p>0,05). Houve nove fístulas no grupo tratado, enquanto no controle duas (p<0,05). Ocorreram sete mortes no grupo tratado e apenas três no controle (p>0,05). CONCLUSÕES: No grupo tratado ocorreu um processo de subnutrição evidenciado pelo menor ganho de peso. Piora na cicatrização intestinal, indicada pela menor força de ruptura. Ocorreu um maior número de complicações pós-operatórias no grupo tratado.

Efeito do ácido zoledrônico em tíbias de ratas ooforectomizadas: estudo prospectivo e randomizado

OBJETIVO: Investigar as repercussões clínicas, biomecânicas e histomorfométricas do ácido zoledrônico em tíbias de ratas osteoporóticas, após ooforectomia bilateral. MÉTODOS: Foram estudadas, prospectivamente, 40 ratas da linhagem Wistar (Rattus novergicus albinus). Com 60 dias de vida, os animais foram aleatorizados em dois grupos de acordo com o procedimento cirúrgico: ooforectomia bilateral (O) (n=20) e pseudo-cirurgia (sham) (P) (n=20). Após 30 dias, os animais foram divididos em quatro subgrupos, de acordo com a administração de 0,1mg/kg de ácido zoledrônico (AZ) ou água destilada (AD): OAZ (n=10), OAD (n=10), PAZ (n=10) e PAD (n=10). Após 12 meses, os animais foram eutanasiados e suas tíbias analisadas. No estudo clínico foi considerado o peso dos animais; no estudo biomecânico foram realizados ensaios compressivos e na análise histomorfométrica foi determinada a área trabecular óssea. RESULTADOS: Os grupos O tiveram aumento de peso significativamente maior que os grupos P (p=0,005). Os grupos OAZ e PAZ tiveram aumento, não significativo, de peso quando comparados aos grupos OAD (p=0,47) e PAD (p=0,68). Os grupos com ácido zoledrônico e com água destilada suportaram carga máxima, semelhante (p=0,2), no momento em que ocorreu fratura. Nos grupos com ácido zoledrônico verificou-se o aumento não significante da área trabecular óssea quando comparados aos grupos com água destilada (p=0,21). Houve correlação positiva entre a área trabecular e a carga máxima (p=0,04; r=0,95). CONCLUSÃO: O ácido zoledrônico não influiu significativamente no peso dos animais. Os resultados mostraram aumento, não significante, tanto da resistência óssea diafisária tibial, como da área trabecular óssea.

Assessment of mechanical properties and dimensions of suture threads utilized in orthopedic surgeries

Fios de sutura de náilon (0, 3-0 e 4-0), poliéster trançado (0, 3-0 e 4-0) e polipropileno (0, 3-0 e 4-0) de 7 marcas comercializadas no Brasil, foram submetidos a análise de diâmetro, comprimento, resistência do encastoamento, resistência à tração do fio sem nó e resistência à tração do fio com nó, segundo metodologia padronizada pela Associação Brasileira de Normas Técnicas (ABNT). Os resultados obtidos indicam que a maioria dos fios testados encontra-se dentro dos valores preconizados pela ABNT.