O emprego de okara no processamento de hambúrger de frango fermentado com Lactobacillus acidophilus CRL 1014

Okara is a residue of production process of soy milk, wich has a considered nutritional value for containing proteins, lipids and fi bers in signifi cant amount, besides bioactive compounds, such as isofl avone. Despite these qualities, the great amount of okara produced annually in Brazil and in other countries generates a problem of disposal waste and it has served only for animal food products. Such situation can be changed by studies, that demonstrate the viability of okara’s utilization in human nourishment. Thus, the purpose of this research was to develop a fermented hamburger with a probiotic bacteria, based on chicken meat and okara fl our. Five formulations were processed: F1-100% of chicken meat, unfermented and containing curing salts, F2-100% of chicken meat, fermented with L. acidophilus, F3 - 90% of chicken meat and 10% of okara meal, fermented with L. acidophilus, F4 - 70% of chicken meat and 30% of okara meal, fermented with L. acidophilus; F5 - 50% of chicken meat and 50% of okara meal, fermented with L. acidophilus. All formulations were evaluated for the viability of the probiotic culture, determination of cooking yield and shrinkage percentage, pH and sensory characteristics. The results have demonstrated that it is possible to elaborate a chicken hamburger, fermented with Lactobacillus acidophilus CRL 1014, with the addition of 10% okara fl our.

Elaboração de pão com casca de abacate hass: valor nutricional e aceitabilidade

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação da qualidade de alimentos biofortificados produzidos em sistemas agroecológicos do trópico úmido

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Duração da eclosão e temperatura de incubação sobre a qualidade dos pintos, seu desempenho e qualidade de carne

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Somatotropina bovina (rbST) recombinante sobre as características físico-químicas da carne de cabritos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Lâminas de fertirrigação e substratos na produção e qualidade de gérbera de vaso

Fertigation management of gerbera crop has been many times performed inadequately, and it has been worsened when mixtures of substrates with different physical and chemical characteristics are used. Aiming at evaluating the production and quality of potted gerbera in two substrates and different levels of fertigation, the experiment was conducted in the greenhouse of the DRN/Soil Science, FCA/UNESP, Botucatu (SP). A 5 x 2 factorial randomized block design (5 levels of fertigation and 2 substrates) was adopted with 4 replications. Levels of fertigation corresponded to maintenance of 100% available water (AW) in the substrate; 100 to 80% of AW; 100 to 60% of AW; 100 to 40% of AW and 100 to 20% of AW. The substrates were as follows: 1- mixed coconut fiber (50% pellet coconut fiber and 50% coir fiber), 2- 40% red soil, 40% decomposed pine bark, 10% composition 1 (40% decomposed pine bark, 30% vermiculite and 30% carbonized rice husk) and 10% composition 2 (75% decomposed pine bark and 25% needles of pine). Plants at the marketing stage were evaluated according to the number of leaves; diameter of leaf surface; leaf area; fresh and dry phytomass of leaves, inflorescence and total plant; inflorescence number and diameter, stem diameter, plant height, leaf area rate and electrical conductivity of the substrate solution. Plants of better quality were obtained when they were maintained in levels of 100% available water and the mixed coconut fiber was used as substrate.

Relação K:Ca:Mg na solução nutritiva para produção de minitomate cultivado em substrato

The study was conducted to evaluate six K:Ca:Mg ratios for production of two cultivars of mini tomato grown in substrate, in a greenhouse, during two growing seasons. The experimental design was randomized blocks with four replications and twelve treatments using both cultivars of mini tomato (Sweet Million and Sweet Grape) and six K:Ca:Mg ratios (4:3:1, 6:3:1, 6:4.5:1, 2.7:3:1, 2.7:2:1, 4:2:1) in nutrient solutions. In both experiments, nutrient solutions with the highest concentrations of Mg, (75 mg L-1) and the lowest concentrations of Ca, (150 mg L-1) led to the highest concentrations of those nutrients in plant dry matter. The Sweet Million cultivar had higher yield (1.69 kg plant-1 and 1.52 kg plant-1), number of fruits per plant (227 and 236), and water use efficiency (29.1 kg m-3 and 25.3 kg m-3). However, the Sweet Grape cultivar had fruits of higher mean weight (9.0 g and 8.8 g) and macronutrient content in the leaves. In both crop cycles, the different K:Ca:Mg ratios affected only the macronutrient contents of the mini tomato plants grown in substrate, with no effect on yield and water use efficiency. The first crop cycle showed the highest N, K, Ca and S content.

Qualidade da carne de bovinos recriados em pastagens associada a suplementação e terminação a pasto ou no confinamento

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Processamento térmico e estádio fenológico na atividade antioxidante do jambu

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Investigação dos compostos biativos em tomates (Lycopersicon esculentum L.) após o processamento térmico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção e caracterização de nanocelulose a partir de fibras de Chorisia speciosa St. Hil

Natural fibers have been highlighted as a renewable material that can replace materials from oil and its derivatives. In this context, Brazil becomes the perfect setting because of the diversity of fibers found in its territory, such as sugarcane, sisal, rice, cotton, coconut, pineapple, among others. The paineiras (Chorisia speciosa St. Hil) are typically Brazilian trees, which produce paina as fruit. These fruits are still little studied as a source of lignocellulose by research groups. This project aimed obtaining and characterization of cellulose nanofibers from the fibers from the paina fibers. Obtaining nanocellulose is practically made through simplified chemical processes. First, was performed out pre-treatments to removal of waxes, lignin and hemicellulose. The first stage of pre-treatment was carried out by alkaline aqueous solution of sodium hydroxide (NaOH) at 5wt%, where the fibers were under constant agitation for 1h at 70°C. Through alkali treatment it was possible to remove most of the lignin, hemicellulose, waxes and extractives. After the alkaline treatment was done bleaching with an aqueous solution of sodium hydroxide (NaOH) to 4wt% and hydrogen peroxide (H2O2) to 24wt% 1:1 during 2h with constant stirring to 50 °C. Through bleaching was possibe to remove residual lignin, and got cellulose with 72% of crystallinity. Nanocellulose of paina fibers was extracted using different conditions of acid hydrolysis with sulfuric acid (H2SO4) to 50wt%. After acid hydrolysis, the suspensions were centrifuged during 30 min and dialyzed in water to remove excess acid until neutral pH (6-7). Then the suspensions were passed by ultrasonification in an ultrasound 20 kHz during 1h in an ice bath. Untreated, alkalinized and bleached fibers as well as cellulose nanoparticles were characterized by the techniques of thermogravimetry ... (Complete abastract click electronic access below)

Investigação dos compostos biativos em tomates (Lycopersicon esculentum L.) após o processamento térmico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção e caracterização de nanocelulose a partir de fibras de Chorisia speciosa St. Hil

Natural fibers have been highlighted as a renewable material that can replace materials from oil and its derivatives. In this context, Brazil becomes the perfect setting because of the diversity of fibers found in its territory, such as sugarcane, sisal, rice, cotton, coconut, pineapple, among others. The paineiras (Chorisia speciosa St. Hil) are typically Brazilian trees, which produce paina as fruit. These fruits are still little studied as a source of lignocellulose by research groups. This project aimed obtaining and characterization of cellulose nanofibers from the fibers from the paina fibers. Obtaining nanocellulose is practically made through simplified chemical processes. First, was performed out pre-treatments to removal of waxes, lignin and hemicellulose. The first stage of pre-treatment was carried out by alkaline aqueous solution of sodium hydroxide (NaOH) at 5wt%, where the fibers were under constant agitation for 1h at 70°C. Through alkali treatment it was possible to remove most of the lignin, hemicellulose, waxes and extractives. After the alkaline treatment was done bleaching with an aqueous solution of sodium hydroxide (NaOH) to 4wt% and hydrogen peroxide (H2O2) to 24wt% 1:1 during 2h with constant stirring to 50 °C. Through bleaching was possibe to remove residual lignin, and got cellulose with 72% of crystallinity. Nanocellulose of paina fibers was extracted using different conditions of acid hydrolysis with sulfuric acid (H2SO4) to 50wt%. After acid hydrolysis, the suspensions were centrifuged during 30 min and dialyzed in water to remove excess acid until neutral pH (6-7). Then the suspensions were passed by ultrasonification in an ultrasound 20 kHz during 1h in an ice bath. Untreated, alkalinized and bleached fibers as well as cellulose nanoparticles were characterized by the techniques of thermogravimetry ... (Complete abastract click electronic access below)

ANATOMY OF NERITINA ZEBRA FROM GUYANA AND BRAZIL (MOLLUSCA: GASTROPODA: NERITIDAE)

Neritina zebra is a common brackish water gastropod living on muddy bottoms with poorly known morphological characters. The morphology, including the variety of colour and pattern of shells, and the anatomy are described. We mainly analyzed the animals collected in the estuary of the Ceara river, Ceara, Brazil, from "Parque Estadual do rio Coco", and specimens from other places deposited in institutional collections, from French Guyana (topotypes) to Sao Paulo. A complete anatomical description is performed, including illustration and discussion ninth concerned to systematics. Amongst the more important anatomical data are: heart diotocardian; kidneys solid; anterior esophagus with pair of ventral esophageal pouches; odontophore with 4 cartilages and 2 horizontal muscles (m6, m6a); males with penis dorsal-right to snout, bearing a terminal papilla; pallial oviduct triaulic, possessing 3 pallial apertures.

Study of adsorption isotherms of green coconut pulp

Brazil is considered one of the largest producers and consumers of tropical fruits. Green coconut (Cocos nucifera L.) stands out not only for its production and consumption, but also for the high amount of waste produced by coconut water industry and in natura consumption. Therefore, there is a need for utilization of this by-product. This study aims to study the adsorption isotherms of green coconut pulp and determine its isosteric heat of sorption. The adsorption isotherms at temperatures of 30, 40, 50, 60, and 70 °C were analyzed, and they exhibit type III behavior, typical of sugar rich foods. The experimental results of equilibrium moisture content were correlated by models present in the literature. The Guggenheim, Anderson and De Boer (GAB) model proved particularly good overall agreement with the experimental data. The heat of sorption determined from the adsorption isotherms increased with the decrease in moisture content. The heat of sorption is considered as indicative of intermolecular attractive forces between the sorption sites and water vapor, which is an important factor to predict the shelf life of dried products.