Rede de turismo sustentável na região de Trás-os-Montes e Alto Douro

O turismo tornou-se um dos maiores sectores da economia a nível mundial. Tem a capacidade de relacionar os aspetos económicos, sociais, culturais e ambientais de forma a agir como uma força motriz para o seu reforço mútuo. É uma atividade económica relevante em regiões de baixa densidade. A problemática deste estudo está diretamente relacionada com o desenvolvimento local assente no turismo. A presente dissertação tem como principal objetivo contribuir para a criação, em Trás-os-Montes e Alto Douro, de um destino turístico capaz de trabalhar em rede. A região em estudo é de baixa densidade, com uma população envelhecida e socialmente deprimida. Contudo, pelas suas características endógenas únicas e pelos seus valores naturais e culturais, tem potencialidade para apostar num desenvolvimento assente no turismo. Com o objetivo de perceber o que estaria a condicionar o desenvolvimento da região, realizaram-se entrevistas e inquéritos a diferentes entidades: agentes políticos, agentes turísticos, associações de desenvolvimento local, agricultores e vitivinicultores. Através dos resultados obtidos verificou-se que na generalidade há consenso entre as entidades. Os principais obstáculos identificados em relação ao desenvolvimento local foram: evolução demográfica, rendimento médio mensal, interação entre entidades e apoio do poder local. As características mais valorizadas da região foram: paisagem natural e humanizada, património cultural, agricultura e gastronomia. Apesar da não interação entre entidades, as mesmas reconhecem as vantagens que podem resultar do trabalho em rede para o desenvolvimento local. Contudo, há temáticas em que é notória a divergência de opiniões, tais como: acesso a serviços de educação e saúde, a transformação do IP4 em A4 e a construção da barragem de Foz Tua. Os resultados permitiram concluir que, apesar de haver consenso sobre a importância do turismo e do trabalho em rede, o maior obstáculo ao desenvolvimento é a falta de interação e coordenação entre as diferentes entidades.

Desigualdades sociais em saúde nos idosos : um retrato para Portugal

RESUMO - Contexto: As desigualdades sociais em saúde são uma questão central de justiça social. No contexto de forte envelhecimento populacional em Portugal, as desigualdades nos idosos representam um desafio crucial para o futuro, sobre as quais existe pouca evidência. Este estudo pretende investigar a existência de desigualdades socioeconómicas em saúde nos idosos, em Portugal. Metodologia: Foram utilizados os dados para Portugal, da quarta vaga do Survey of Health, Ageing and Retirement in Europe. O estudo engloba 2017 indivíduos com 50 ou mais anos. Foram utilizados quatro indicadores de saúde: problemas de saúde, saúde auto-reportada, doenças de longa duração e atividade limitada. Foi utilizado o nível de educação como indicador socioeconómico. As desigualdades socioeconómicas foram avaliadas através de regressões logísticas multivariadas. Resultados: Existem desigualdades socioeconómicas em saúde nos idosos favoráveis aos mais educados. Os indivíduos com menor educação estão em maior risco de reportar má saúde (OR=5,5); maior risco em ter problemas de saúde, existindo um gradiente social na Hipertensão Arterial (OR=2,4) e na Artrite (OR=7,0); maior risco de doenças de longa duração (OR=1,6) e maior risco de limitação nas atividades diárias (OR=5,1). As desigualdades socioeconómicas diminuem com a idade. Conclusão: De forma a melhorar a saúde e reduzir as desigualdades socioeconómicas em saúde nos idosos, os resultados apontam para a necessidade de implementar medidas no âmbito dos problemas de saúde em que existe um gradiente social, melhorar o nível de educação da população geral e implementar medidas de educação para a saúde, aumentando a literacia em saúde nos idosos mais jovens.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Triatomíneos da Amazônia: Ocorrência de triatomíneos na área do reservatório da hidrelé trica de Tucuruí (Pará) e observações sobre o ciclo evolutivo de Rhodnius robustos Larrousse, 1927 (HEMIPTERA, REDUVIIDAE, TRIATOMINAE).

Os autores apresentam dados sobre a ocorrênncia de triatomíneas silvestres encon-tiados em vários ecótopos (palmeiras, tocas de roedores e epífitas aéreas), assim como, capturas através de atração luminosa, no reservatório da Usina Hidrelétrica Tucu ruí, num trecho compreendido entre Santo Antonio e Ipixuna, rio Tocantins; enfocando as pectos do ciclo de vida de Rhodnius robustus realizado no laboratôrio do INPA, Manaus.

How to increase brand value expanding the category and brand presence to the main meal occasion for Sumol- Compal

Having registered negative retail value growth of 4% in Portugal in 2014, the juice category is set to decline further by 5,5% until 2019. Manufacturers of juices and nectars are therefore increasingly looking for new categories in order to balance this negative forecast in their home territory. One apparent growth opportunity for Compal, the leading producer of juices and nectars, is to expand its commercial reach to new occasions of consumption. This report carefully analyzes the opportunities related to an expansion to the main meal occasion and introduces a complete marketing and communications plan for a possible new main meal juice, Compal à Mesa. The product concept represents a rather premium positioning for the main meal occasion, including new flavor mixes that are targeted at different occasions of meals. The justification of the introduced concept includes a discussion of the primary and secondary research that was performed

How different generations contact and search for brands on social media? Comparing gen X and Y

This research intends to examine if there were significant differences on the brand engagement and on the electronic word of mouth (e-WOM)1 referral intention through Facebook between Generation X and Generation Y (also called millennials). Also, this study intends to examine if there are differences in the motivations that drive these generations to interact with brands through Facebook. Results indicated that Generation Y members consumed more content on Facebook brands’ pages than Generation X. Also, they were more likely to have an e-WOM referral intention as well as being more driven by brand affiliation and opportunity seeking. Finally, currently employed individuals were found to contribute with more content than students. This study fills the gap in the literature by addressing how marketing professionals should market their brand and interact and engage with their customers, based on customers’ generational cohort.

Gestão de crises de âmbito policial

The issues concerning Crisis Situations under the scope of police activity, raised after incidents considered critical, has emerged with greater intensity during the most recent decades, posing a major challenge for police forces around the world. These are situations or events of crucial importance, involving hostage taken or barricaded individuals, in which inevitably human lives are at risk, requiring from law enforcement agencies a specific response capability, i.e., a type of intervention not framed under the parameters considered as routine, in order to obtain solutions to minimize the possibility of casualties. Because this is about impacting situations of extreme gravity, where the preservation of human lives is concerned and, in many cases, the very Rule of Law as well, we understand the need for police forces to adapt to new procedures and working methods. Such procedures are an enormously complex task that requires the coordination and articulation of several components, including not infrequently the performance of different police forces, as well as organizations and entities with varied powers and duties, which implies the need for effective management. This explains the emergence of Crisis Management Structures, imposing to determine which are their fundamental components, their importance, how they interconnect, and their major goal. The intrinsic features will also be analyzed in the aspect that we consider to be the fundamental groundwork of a Crisis Management Structure, i.e., Negotiation itself, considering it as a kind of police intervention, where a wide range of procedures feeds a channel of dialogue, aiming at minimizing the damage resultant from an extreme action, in particular, to prevent the death of any of those involved. This is in essence the path we have chosen to develop this study, trying to find out an answer to the fundamental question: What model of Crisis Management Structure should be adopted to manage a critical event involving hostage negotiation?

Public diplomacy : Relatório de Estágio na Embaixada dos Estados Unidos em Lisboa

O OPA da Embaixada dos EUA é o departamento responsável por todos os eventos e relações públicas da Embaixada, assim como todos os programas de intercâmbio educacionais e culturais, com o âmbito de promover a política externa americana, assim como os seus valores. O departamento é principal ponto de contato com os meios de comunicação, organizações e pessoas individuais que queiram obter informações sobre os EUA. Além das tarefas desenvolvidas, enquanto estagiária, no âmbito da linha de trabalho do OPA, o presente relatório contém uma contextualização e enquadramento histórico sobre a PD. A PD tem como objetivo promover os interesses nacionais e a política externa, além de informar e influenciar os públicos estrangeiros sobre a sociedade norte-americana e o Governo dos EUA. Todo o trabalho desempenhado no OPA está intrinsecamente ligado à PD e por isso este relatório está dividido em duas partes: a descrição das minhas atividades no departamento e o trabalho de investigação sobre a PD.

Influence of type of binder and sand on the characteristics of masonry mortars

This study deals with the characterization of masonry mortars produced with different binders and sands. Several properties of the mortars were determined, like consistence, compressive and flexural strengths, shrinkage and fracture energy. By varying the type of binder (Portland cement, hydrated lime and hydraulic lime) and the type of sand (natural or artificial), it was possible to draw some conclusions about the influence of the composition on mortars properties. The results showed that the use of Portland cement makes the achievement of high strength classes easier. This was due to the slower hardening of lime compared with cement. The results of fracture energy tests showed much higher values for artificial sand mortars when compared with natural sand ones. This is due to the higher roughness of artificial sand particles which provided better adhesion between sand and binder.

Estudo e caracterização de espécies portuguesas de madeira termicamente modificada.

A modificação térmica tem-se revelado um método eficaz na melhoria da durabilidade de elementos de madeira. Até ao momento, as aplicações da madeira termicamente modificada (MTM) têm sido limitadas a revestimentos já que o tratamento térmico de tratamento conduz a uma redução significativa das resistências mecânicas da madeira. Contudo, este tratamento térmico poderá valorizar e potenciar a utilização de espécies de madeira menos utilizadas na construção, como são o Eucalipto e o Pinho bravo nacional. Com o objetivo de avaliar o efeito do tratamento térmico nas espécies referidas e, complementarmente, na madeira de Faia e Freixo, realizou-se uma campanha experimental composta por ensaios de caracterização mecânica (compressão paralela às fibras e flexão) e de estabilidade dimensional (retração, inchamento e teor de água de equilíbrio (TAE)). Para efeitos de comparação, todos os ensaios envolveram séries de provetes de cada espécie de madeira natural e MTM. Os resultados obtidos são coerentes com a bibliografia disponível, o aumento da estabilidade dimensional, assim como a diminuição do TAE e das propriedades mecânicas de flexão foram verificadas, permitindo, assim, avaliar a influência da modificação térmica nas propriedades de espécies de madeira presentes em Portugal.

HLT Hilotec: self-building manual for sustainable housing

The future of the construction industry will require changes at many levels. One is the ability of companies to adapt to new challenges, converting needs to opportunities and simultaneously contributing to the solving of social and environmental problems. In the coming decades we will see a change in attitude in the industry, with a strong tendency to adopt natural and recycled materials, as well as bet on green technology and social innovation oriented to emerging countries. On the other hand, emerging countries have a high demand for housing construction on a large scale, but the current techniques in the developed countries for building requires a large amount of natural resources and skilled labor. This contextualization brings sustainability problems for the construction sector in emerging countries, often with scarce natural resources and with the construction sector underdeveloped. Through a cooperative action between the construction company Mota-Engil Engineering and the University of Minho in Portugal, a construction technology was developed based on the use of Compressed Earth Blocks as part of a social concept for innovative small houses, favoring the adoption of local and natural materials and with the main premise of being dedicated to self-construction. The HiLoTec project - Development of a Sustainable Self-Construction System for Developing Countries was based on this idea. One of the several results of this project is this construction manual. To Mota-Engil the project was a platform for incubation of knowledge about earth construction and to obtain a constructive solution validated technically and scientifically, suitable to be implemented in the markets where it operates. For the University of Minho the project was an opportunity to strengthen skills in research, laboratory and scientific development, through the development of engineering studies, architecture and sustainability, as well as supporting the doctoral scholarships and dissemination of scientific publications. May the knowledge of this project be of benefit, in the future, for the welfare of those who build a HiLoTec house.

Durabilidade do betão auto-compactável reforçado com fibras de aço

A durabilidade é um dos aspetos mais importantes que o betão deve garantir, devido à sua fundamental incidência na vida útil das estruturas. Devido ao número crescente de estruturas degradadas prematuramente, a durabilidade das estruturas de betão tem sido uma preocupação constante no meio técnico da construção. As estruturas de betão reforçado com fibras de aço (BRFA) estão sujeitas à penetração de cloretos e à ação da carbonatação que causam a corrosão das fibras de aço, o que pode influenciar negativamente o desempenho estrutural e a durabilidade do betão. A investigação da durabilidade do betão auto-compactável reforçado com fibras de aço (BACRFA) é ainda escassa, nomeadamente, os aspetos relacionados com a resistência à corrosão das fibras, suscitando a dúvida se a corrosão das fibras pode, ou não, provocar o destacamento do betão envolvente. Neste contexto, foi realizado um trabalho experimental com provetes de BACRFA e provetes de betão auto-compactável (BAC) sem fibras com o objetivo de avaliar os efeitos da corrosão das fibras de aço na durabilidade do BACRFA. Os resultados obtidos para os diferentes betões em estudo são apresentados e analisados.

Comparative environmental life-cycle analysis of concretes using biomass and coal fly ashes as partial cement replacement material

Nowadays, the concrete production sector is challenged by attempts to minimize the usage of raw materials and energy consumption, as well as by environmental concerns. Therefore, it is necessary to choose better options, e.g. new technologies or materials with improved life-cycle performance. One solution for using resources in an efficient manner is to close the materials' loop through the recycling of materials that result either from the end-of-life of products or from being the by-product of an industrial process. It is well known that the production of Portland cement, one of the materials most used in the construction sector, has a significant contribution to the environmental impacts, mainly related with carbon dioxide emission. Therefore, the study and utilization of by-products or wastes usable as cement replacement in concrete can supply more sustainable options, provided that these type of concrete produced has same durability and equivalent quality properties as standard concrete. This work studied the environmental benefits of incorporating different percentages of two types of fly ashes that can be used in concrete as cement replacement. These ashes are waste products of power and heat production sectors using coal or biomass as fuels. The results showed that both ashes provide a benefit for the concrete production both in terms of environmental impact minimization and a better environmental performance through an increase in cement replacement. It is possible to verify that the incorporation of fly ashes is a sustainable option for cement substitution and a possible path to improve the environmental performance of the concrete industry.

Durability indicators comparison for SCC and CC in tropical coastal environments

Self-compacting concrete (SCC) demands more studies of durability at higher temperatures when subjected to more aggressive environments in comparison to the conventional vibrated concrete (CC). This work aims at presenting results of durability indicators of SCC and CC, having the same water/binder relations and constituents. The applied methodologies were electrical resistivity, diffusion of chloride ions and accelerated carbonation experiments, among others, such as microstructure study, scanning electron microscope and microtomography experiments. The tests were performed in a research laboratory and at a construction site of the Pernambuco Arena. The obtained results shows that the SCC presents an average electrical resistivity 11.4% higher than CC; the average chloride ions diffusion was 63.3% of the CC; the average accelerated carbonation penetration was 45.8% of the CC; and the average open porosity was 55.6% of the CC. As the results demonstrated, the SCC can be more durable than CC, which contributes to elucidate the aspects related to its durability and consequent prolonged life cycle.

Evaluation of the performance of recycled textile fibres in the mechanical behaviour of a gypsum and cork composite material

Given the need for using more sustainable constructive solutions, an innovative composite material based on a combination of distinct industrial by-products is proposed aiming to reduce waste and energy consumption in the production of construction materials. The raw materials are thermal activated flue-gas desulphurization (FGD) gypsum, which acts as a binder, granulated cork as the aggregate and recycled textile fibres from used tyres intended to reinforce the material. This paper presents the results of the design of the composite mortar mixes, the characterization of the key physical properties (density, porosity and ultrasonic pulse velocity) and the mechanical validation based on uniaxial compressive tests and fracture energy tests. In the experimental campaign, the influence of the percentage of the raw materials in terms of gypsum mass, on the mechanical properties of the composite material was assessed. It was observed that the percentage of granulated cork decreases the compressive strength of the composite material but contributes to the increase in the compressive fracture energy. Besides, the recycled textile fibres play an important role in the mode I fracture process and in the fracture energy of the composite material, resulting in a considerable increase in the mode I fracture energy.