Remoção de cromo de resíduos de curtumes por argilitos da formação Corumbataí - SP

The tanning wastes are characterized to be significant sources of pollution in the hydrosphere when non adjusted or disposed adequated form. That happens because this industry type uses the chromium to tan hides, and this element is present in discharges concentrations in final wastes, characterizing this waste type as dangerous, according to the Associação Brasileira de Normas Técnicas, através da Norma Brasileira 10.004 de 2004. Due to this, the research proposes a form to reduction chromium of the tanning wastes through the process of adsorption. For that were used mining-wastes of Corumbataí Formation clays, material commonly used in the production of ceramic products in Rio Claro (SP). They were accomplished laboratory essays that involved the preparation of different clays pulps and subsequent mixture of these with the tanning wastes, maintaining them under different mixing times and adsorption contacts. After the separation of the mixtures, the leached were chemically analyzed and it was seen the efficiency of chromium reduction and your relationship with the variation of different times of contact clays/wastes and different grain sizes used in the pulps preparation.

Estudo eletroquímico do sistema microestruturado montmorilonita-8- hidroxiquinolina na presença de íons metálicos

Pós-graduação em Química - IBILCE

Estudo sobre desruptores endócrinos em sistemas aquáticos: detecção e perspectivas de tratamento das águas do Rio Aporé-MS/GO, utilizando-se adsorventes sólidos

Pós-graduação em Ciência dos Materiais - FEIS

Condutividade hidráulica saturada e direcional em xisto: ensaios em laboratório. -

Pós-graduação em Geociências e Meio Ambiente - IGCE

A influência da temperatura na secagem forçada da matéria-prima cerâmica da Formação Corumbataí na região do Polo de Santa Gertrudes (SP)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Adsorção-fotodegradação do herbicida paraquate em água pela argila Na-Bentonita e por novos materiais TiO2-Bentonita, TiO2/ZnOBentonita, Al/Fe-Bentonita e Al/Fe.Cu-Bentonita

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synthesis of polycationic bentonite-ionene complexes and their benzene adsorption capacity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Filmes de nanocompósitos de polímero condutor, nanopartículas de argila e nanopartículas de ouro para aplicação em sensores ambientais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização mineralógica e química das fontes de poeira e sua influência na atmosfera da região do polo cerâmico de Santa Gertrudes (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise das relações entre parâmetros geolétricos e vazões para o aquífero livre de Caçapava do Sul - RS

The geophysical methods may be employed in aquifer system studies, as determination of groundwater level, soil/rock contact, beyond estimative of the aquifer thickness horizon. The geoeletric methods are particularly relevant in evaluations of the oilfields systems, due to directs relations between porosity and electrical resistivity, which allow inferences about oil and gas production. The indirect estimative of the productions in free aquifers system is something complex before of the diverse variables responsible for factors or physical phenomena, as clays minerals, which conditioned the physical parameters by electric geophysical methods. This paper present analyzed correlation among electrical resistivity, chargeability and direct measure flow in shallow wells, for determination of statistical relationships between parameters and evaluation of the geological constraints evolved. The study count with the 23 shallow wells located in free aquifer, constituted by alteration materials of the granites localized in Caçapava do Sul (RS). The geophysical data are acquired by vertical electric sounding in Schlumberger array. The correlations between electrical resistivity and flow, chargeability and flow, thickness of the soil/saprolite and flow indicated relationships between physical and hydrogeologic parameters, with variations conditioned by factors as porosity, permeability, besides intrinsic geological heterogeneities such soil variable thickness and rock fragments with several alteration degrees.

Geoquímica de perfis lateríticos na chapada sedimentar do Triângulo Mineiro

The ferruginous sandstone (Serra da Galga member) from Marilia formation present in sedimentary mining triangle plateaus - MG (southeast Brazil) is still not properly characterized, as well as the presence of a rich layer Fe nodules which is not properly understood, as are the alteration products of this material that may be linked to the presence of refractory clays which are characterized by intimate relationship between Fe and Al. Aluminum is widely present on top of these plateaus. This course conclusion paper characterized the mineralogy and distribution of smaller elements both rust sandstone evolved as soil above this sandstone. The characterization has been done by using X-ray fluorescence techniques (XRF), the iron was removed by using the CBD method (dithionito-citratebicarbonate), and X-ray diffraction (XRD) and analysis of the products extracted by the CBD method by ICP- OES were made to characterize the material. The results of the XRF show great variation of Al and Si, Fe with almost constant behavior in the average depth of 110 cm, where it has the highest concentration levels. Fe appear associated with the V and Ce. CDB results show a clear relation of Fe with Al. Al does not have in this case compared with Cr or any other item. The concentration of extracted Al was always below the concentration of Fe. In the region, the formation of this Latosols- Gleysols system is subject to topography and its influence on local water regime, a regime that has direct influence on the formation of supergene accumulations as in the area and results in aluminum accumulation in refractory clays exploited by IBAR mining

Avaliação do enriquecimento aluminoso em perfil laterítico desferruginizado na Chapada Sedimentar do Triângulo Mineiro e potencial econômico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

TDEM survey in urban environmental for hydrogeological study at USP campus in Sao Paulo city, Brazil

In this work, some TDEM (Time Domain Electromagnetic) results at USP (University of Sao Paulo) campus in Sao Paulo city, Brazil, are presented. The data were acquired focusing on two mains objectives: (i) to map geoelectrical stratigraphy of Sao Paulo sedimentary basin, emphasizing on hydrogeological studies about sedimentary and crystalline aquifers, and (ii) to analyze the viability of TDEM data acquisition use in urban environment. The study area is located in Sao Paulo basin border, characterized by Resende and Sao Paulo formations, which are constituted by sand-clays sediments over a granite-gneissic basement. Two equipments were used in order to acquire database: Protem47 (low power), and Protem57-MK2 (high power). Capacitive noise affect obtained data with Protem47 due to the presence of metal pipes buried at IAG/USP (Institute of Astronomy, Geophysics, and Atmospheric Science) test site at USP. On the other hand, capacitive noise did not affect acquired data with Protem57-MK2, and the data present high signal to noise ratio. Surveys helped in determining sedimentary and crystalline aquifers, characterized by a fracture zone with water inside basin basement (conductive zone). Results show good agreement with local geology obtained from lithological boreholes located in the study areas. Moreover, it shows that TDEM method can be used in urban environments with a countless potential in hydrogeological studies, offering great reliability. Studies showed that main TDEM-method limitation at USP was the lack of space for opening the transmitter loop. Results are very promising and open new perspectives for TDEM-method use in urban environments as this area remains unexplored. (C) 2011 Elsevier B.V. All rights reserved.

Structural, Spectroscopic (NMR, IR, and Raman), and DFT Investigation of the Self-Assembled Nanostructure of Pravastatin-LDH (Layered Double Hydroxides) Systems

Layered double hydroxide (LDH) nanocontainers, suitable as carriers for anionic drugs, were intercalated with Pravastatin drug using magnesium-aluminum and zinc-aluminum in a M-II/Al molar ratio equal 2 and different Al3+/Pravastatin molar ratios. Postsynthesis treatments were used in order to increase the materials crystallinity. Hybrid materials were characterized by a set of physical chemical techniques: chemical elemental analysis, X-ray diffraction (XRD), mass coupled thermal analyses, vibrational infrared and Raman spectroscopies, and solid-state C-13 nuclear magnetic resonance (NMR). Results were interpreted in light of computational density functional theory (DFT) calculations performed for Sodium Pravastatin in order to assign the data obtained for the LDH intercalated materials. XRD peaks of LDH-Pravastatin material and the one-dimensional (1D) electron density map pointed out to a bilayer arrangement of Pravastatin in the interlayer region, where its associated carboxylate and vicinal hydroxyl groups are close to the positive LDH. The structural organization observed for the stacked assembly containing the unsymmetrical and bulky monoanion Pravastatin and LDH seems to be promoted by a self-assembling process, in which local interactions are maximized and chloride ion cointercalation is required. It is observed a high similarity among vibrational and C-13 NMR spectra of Na-Pravastatin and LDH-Pravastatin materials. Those features indicate that the intercalation preserves the drug structural integrity. Spectroscopic techniques corroborate the nature of the guest species and their arrangement between the inorganic layers. Changes related to carboxylate, alcohol, and olefinic moieties are observed in both vibrational Raman and C-13 NMR spectra after the drug intercalation. Thus, Pravastatin ions are forced to be arranged as head to tail through intermolecular hydrogen bonding between adjacent organic species. The thermal decomposition profile of the hybrid samples is distinct of that one observed for Na-Pravastatin salt, however, with no visible increase in the thermal behavior when the organic anion is sequestrated within LDH gap.

Molecular dynamics of poly(Ethylene Glycol) intercalated in clay, studied using 13C solid-state NMR

In this study, Cross-Polarization Magic-angle Spinning CP/MAS, 2D Exchange, Centerband-Only Detection of Exchange (CODEX), and Separated-Local-Field (SLF) NMR experiments were used to study the molecular dynamics of poly(ethylene glycol) (PEG) inside Hectorite/PEG intercalation compounds in both single- and double-layer configurations. The results revealed that the overall amplitude of the motions of the PEG chain in the single-layer configuration is considerably smaller than that observed for the double-layer intercalation compound. This result indicates that the effect of having the polymer chain interacting with both clay platelets is to produce a substantial decrease in the motional amplitudes of those chains. The presence of these dynamically restricted segments might be explained by the presence of anchoring points between the clay platelets and the PEG oxygen atoms, which was induced by the Na+ cations. By comparing the PEG motional amplitudes of the double-layered nanocomposites composed of polymers with different molecular weights, a decrease in the motional amplitude for the smaller PEG chain was observed, which might also be understood using the presence of anchoring points.