Solar driven Adsorption Desalination system

Desalination is one of the most traditional processes to generate potable water. With the rise in demand for potable water and paucity of fresh water resources, this process has gained special importance. Conventional thermal desalination processes involves evaporative methods such as multi-stage flash and solar distils, which are found to be energy intensive, whereas reverse osmosis based systems have high operating and maintenance costs. The present work describes the Adsorption Desalination (AD) system, which is an emerging process of thermal desalination cum refrigeration capable of utilizing low grade heat easily obtainable from even non-concentrating type solar collectors. The system employs a combination of flash evaporation and thermal compression to generate cooling and desalinated water. The current study analyses the system dynamics of a 4-bed single stage silica-gel plus water based AD system. A lumped model is developed using conservation of energy and mass coupled with the kinetics of adsorption/desorption process. The constitutive equations for the system components viz. evaporator, adsorber and condenser, are solved and the performance of the system is evaluated for a single stage AD system at various condenser temperatures and cycle times to determine optimum operating conditions required for desalination and cooling. (C) 2013 P. Dutta. Published by Elsevier Ltd.

Discerning heat transfer in building materials

The function of a building is to ensure safety and thermal comfort for healthy living conditions. Buildings primarily comprise an envelope, which acts as an interface separating the external environment from the indoors environment. The building envelope is primarily responsible for regulating indoor thermal comfort in response to external climatic conditions. It usually comprises a configuration of building materials to thus far provide requisite structural performance. However, studies into building-envelope configurations to provide a particular thermal performance are limited. As the building envelope is exposed to the external environment there will be heat and moisture transfer to the indoor environment through it. The overall phenomenon of heat and moisture transfer depends on the microstructure and configuration within the building material. Further, thermal property of a material is generally dependent on its microstructure, which comprises a network of pores and particles arranged in a definite structure. Thermal behaviour of a building material thus depends on the thermal conductivities of the solid particles, pore micro-structure and its constituent fluid (air and/or moisture). The thermal response of a building envelope is determined by the thermal characteristics of the individual building materials and its configuration. Understanding the heat transfer influenced by the complex networks of pores and particles is a relatively new study in the area of building climatic-response. The current study reviews the heat-transfer mechanisms that determine the thermal performance of a building material attributed to its micro-structure. A theoretical basis for the same is being evolved and its relevance in regulating heat-transfer through building envelopes, walls in particular, is reviewed in this paper. (C) 2014 N.C. Balaji. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).

Key business factors for eco-innovation: an overview of recent firm-level empirical studies

[EN] The increasing interest in eco-innovation or environmental innovation as a strategy not only to address the serious global environmental problems but also as a source of competitive advantages for companies and for the emergence of new business areas, leads us to try to identify the different factors that act as determinants of its development and adoption at the micro level.

Wage stickiness and unemployment fluctuations: an alternative approach

28 p.

The Long Run Demand for Lighting: Elasticities and Rebound Effects in Different Phases of Economic Development

25 p.

Trends in Income and Price Elasticities of Transport Demand (1850-2010)

40 p.

Coleta Seletiva Solidária de resíduos recicláveis dirigida à rede estadual de ensino do Rio de Janeiro - estudo de caso.

O aumento da demanda de água, energia, bem como a mudança na composição e na quantidade dos resíduos, associados aos impactos socioambientais que eles provocam, tornaram-se um dos grandes desafios atuais para a sociedade e, em particular, para as escolas públicas. Nesse contexto, o governo do estado do Rio de Janeiro, dentro de seu Plano Estadual de Gerenciamento Integrado de Resíduos Sólidos, criou o Programa Coleta Seletiva Solidária (PCSS), em outubro de 2009, realizado em parceria entre o Instituto Estadual do Ambiente (INEA), a Universidade do Estado do Rio de Janeiro (UERJ) e a Secretaria de Estado de Educação (SEEDUC). Este Programa assessora a implantação da Coleta Seletiva Solidária (CSS) de materiais recicláveis nos municípios do estado. O eixo-escolas, uma das suas linhas de ações, assessora a implantação da CSS na rede estadual, conforme determina o Decreto Estadual 40.645/07. Considerando os problemas relacionados aos resíduos e a exigência legal, boa parte das escolas estaduais não implantaram ainda a Coleta Seletiva Solidária, por diversos fatores. O objetivo da pesquisa é estudar o modelo de Coleta Seletiva proposto pelo PCSS nas escolas da rede estadual de ensino do Rio de Janeiro. Como estudo de caso, esse modelo foi aplicado no Colégio Estadual Souza Aguiar (CESA). Utilizou-se da pesquisa-ação como abordagem metodológica e o instrumento de coleta de dados foi o questionário dirigido aos participantes das oficinas de capacitação na UERJ. No CESA foram aplicados questionários aos alunos e acompanhado o processo de implantação da CSS através da observação participante. Conclui-se que os resultados da pesquisa não podem ser generalizados para toda a rede estadual de ensino do Rio de Janeiro. Contudo, ele possibilitou identificar questões importantes e sugerir recomendações para o aperfeiçoamento do modelo estudado. Destaca-se a importância de formalizar o compromisso institucional dos dirigentes das escolas com a implantação da CSS, contribuindo com a formação de cidadãos comprometidos com a sustentabilidade socioambiental do estado do Rio de Janeiro.

O modelo neoliberal e suas repercussões para a saúde do trabalhador de enfermagem

O objeto deste estudo são as repercussões do modelo neoliberal na saúde dos trabalhadores de enfermagem que atuam no contexto hospitalar. Os objetivos foram: (I) identificar as características do modelo produtivo neoliberal no trabalho hospitalar e de enfermagem; (II) analisar as implicações do neoliberalismo no processo saúde-doença dos trabalhadores de enfermagem; e (III) propor recomendações à organização do trabalho para minimização dos efeitos do modelo neoliberal na saúde desses trabalhadores. A pesquisa, de caráter qualitativo, descritivo e exploratório, foi desenvolvida em um hospital universitário localizado no Município do Rio de Janeiro. Os sujeitos são trabalhadores de enfermagem, dos quais 14 são enfermeiros e 20, técnicos de enfermagem. O instrumento de coleta de dados caracteriza-se na entrevista semiestruturada. O projeto foi aprovado pelo comitê de ética da instituição na qual se desenvolveu o estudo, sob número de protocolo 365.716, conforme resolução 466/12. A técnica utilizada para o tratamento dos dados coletados é a Análise Temática de Conteúdo, que fez emergir quatro categorias. I) As configurações da organização e processo de trabalho hospitalar no contexto neoliberal, em que se discutem as características dessa organização laboral e do processo de trabalho da enfermagem diante do impacto do modelo neoliberal na forma de gestão. Elabora-se também uma análise dos efeitos desse modelo tanto na previsão e provisão de recursos, humano e material, quanto na precarização dos vínculos de trabalho e seus efeitos sobre a qualidade e a quantidade da produtividade da enfermagem. Discute-se ainda o modo operatório dos trabalhadores de enfermagem diante das transformações do mundo do trabalho, impostas pela influência do neoliberalismo no ambiente hospitalar. II) O modelo neoliberal no ambiente hospitalar: implicações políticas e interpessoais no coletivo de enfermagem, em que se discutem (i) as relações hierárquicas e de poder tecidas nesse contexto; e (ii) o uso e as consequências das tecnologias em saúde e a demanda por capacitação e treinamento dos profissionais. III) Os impactos do modelo neoliberal no processo saúde-doença dos trabalhadores, em que se analisa que, devido à configuração da organização do trabalho, há muitas repercussões negativas para o processo saúde-doença dos trabalhadores, tais como estresse, taquicardia, hipertensão arterial sistêmica, sonolência, sudorese, esgotamento físico e mental, depressão, desgaste físico, cefaleia, dor epigástrica e irritabilidade. IV) As recomendações para melhoria do ambiente de trabalho na ótica dos profissionais, em que (i) se discutem as propostas para melhoria das condições laborais e do processo de trabalho dos profissionais de enfermagem e (ii) se elencam sugestões para minimização dos impactos causados pelas inúmeras formas de precarização presentes nesse contexto laboral, objetivando assim, o incremento da qualidade de vida e da saúde dos trabalhadores. Conclui-se que diversas foram as repercussões do neoliberalismo para o processo e organização do trabalho hospitalar, assim como para a saúde do trabalhador.

Taxa de câmbio e exportações brasileiras: uma análise do período recente

Esta dissertação tem por objetivo analisar o comportamento da balança comercial no Brasil no período de 1999 a 2006 e buscar compreender os fatores que contribuíram positivamente para a evolução das exportações, compensando os efeitos negativos advindos do movimento de apreciação da taxa de câmbio ocorrido a partir de 2003. Para tanto, a partir da adaptação de um modelo de oferta e demanda das exportações, elaborado por Goldstein e Khan (1978), utiliza-se dois métodos de estimação para a obtenção das elasticidades com relação às variáveis explicativas do modelo. O primeiro método consiste na estimação de um modelo simultâneo de oferta e demanda das exportações e o segundo método consiste no modelo de cointegração proposto por Engle e Granger. Em ambos os casos, as exportações foram desagregadas por classes de produtos (manufaturados, semimanufaturados e básicos), além do total das exportações.Do lado da demanda, os resultados estimados em ambos os métodos de estimação, tanto para o longo como para o curto prazo, confirmam as hipóteses levantadas ao longo do estudo ou seja, o crescimento dos preços dos produtos exportados, assim como o crescimento da renda mundial, foram bastante relevantes para o crescimento das exportações em todas as classes de produtos analisadas. Em relação à oferta de exportação, a taxa de utilização da capacidade produtiva e os preços dos produtos exportados estiveram co-relacionados positivamente com o quantum ofertado, enquanto que a taxa de câmbio, ao contrário do esperado, apresentou elasticidades negativas.

Interactions between building integrated photovoltaics and microclimate in urban environments

BIPV (building integrated photovoltaics) has progressed in the past years and become an element to be considered in city planning. BIPV has significant influence on microclimate in urban environments and the performance of BIPV is also affected by urban climate. The thermal model and electrical performance model of ventilated BIPV are combined to predict PV temperature and PV power output in Tianjin, China. Then, by using dynamic building energy model, the building cooling load for installing BIPV is calculated. A multi-layer model AUSSSM of urban canopy layer is used to assess the effect of BIPV on the Urban Heat Island (UHI). The simulation results show that in comparison with the conventional roof, the total building cooling load with ventilation PV roof may be decreased by 10%. The UHI effect after using BIPV relies on the surface absorptivity of original building. In this case, the daily total PV electricity output in urban areas may be reduced by 13% compared with the suburban areas due to UHI and solar radiation attenuation because of urban air pollution. The calculation results reveal that it is necessary to pay attention to and further analyze interactions between BIPV and microdimate in urban environments to decrease urban pollution, improve BIPV performance and reduce cooling load. Copyright © 2006 by ASME.

Effect of building integrated photovoltaics on microclimate of urban canopy layer

Building integrated photovoltaics (BIPV) has potential of becoming the mainstream of renewable energy in the urban environment. BIPV has significant influence on the thermal performance of building envelope and changes radiation energy balance by adding or replacing conventional building elements in urban areas. PTEBU model was developed to evaluate the effect of photovoltaic (PV) system on the microclimate of urban canopy layer. PTEBU model consists of four sub-models: PV thermal model, PV electrical performance model, building energy consumption model, and urban canyon energy budget model. PTEBU model is forced with temperature, wind speed, and solar radiation above the roof level and incorporates detailed data of PV system and urban canyon in Tianjin, China. The simulation results show that PV roof and PV façade with ventilated air gap significantly change the building surface temperature and sensible heat flux density, but the air temperature of urban canyon with PV module varies little compared with the urban canyon of no PV. The PV module also changes the magnitude and pattern of diurnal variation of the storage heat flux and the net radiation for the urban canyon with PV increase slightly. The increase in the PV conversion efficiency not only improves the PV power output, but also reduces the urban canyon air temperature. © 2006.

Simulating early adoption of alternative fuel vehicles for sustainability

We quantify the conditions that might trigger wide spread adoption of alternative fuel vehicles (AFVs) to support energy policy. Empirical review shows that early adopters are heterogeneous motivated by financial benefits, environmental appeal, new technology, and vehicle reliability. A probabilistic Monte Carlo simulation model is used to assess consumer heterogeneity for early and mass market adopters. For early adopters full battery electric vehicles (BEVs) are competitive but unable to surpass diesels or hybrids due to purchase price premium and lack of charging availability. For mass adoption, simulations indicate that if the purchase price premium of a BEV closes to within 20% of an in-class internal combustion engine (ICE) vehicle, combined with a 60% increase in refuelling availability relative to the incumbent system, BEVs become competitive. But this depends on a mass market that values the fuel economy and CO2 reduction benefits associated with BEVs. We also find that the largest influence on early adoption is financial benefit rather than pro-environmental behaviour suggesting that AFVs should be marketed by appealing to economic benefits combined with pro-environmental behaviour to motivate adoption. Monte Carlo simulations combined with scenarios can give insight into diffusion dynamics for other energy demand-side technologies. © 2012 Elsevier Inc.

An architecture design with data model for product recovery management systems

Due to concerns about environmental protection and resource utilization, product lifecycle management for end-of-life (EOL) has received increasing attention in many industrial sectors including manufacturing, maintenance/repair, and recycling/refurbishing of the product. To support these functions, crucial issues are studied to realize a product recovery management system (PRMS), including: (1) an architecture design for EOL services, such as remanufacturing and recycling; (2) a product data model required for EOL activity based on international standards; and (3) an infrastructure for information acquisition and mapping to product lifecycle information. The presented works are illustrated via a realistic scenario. © 2008 Elsevier B.V. All rights reserved.

双聚焦偏移速度估计与可分表示叠前弹性反演

In exploration seismology, the geologic target of oil and gas reservoir in complex medium request the high accuracy image of the structure and lithology of the medium. So the study of the prestack image and the elastic inversion of seismic wave in the complex medium come to the leading edge. The seismic response measured at the surface carries two fundamental pieces of information: the propagation effects of the medium and the reflections from the different layer boundaries in the medium. The propagation represent the low-wavenumber component of the medium, it is so-called the trend or macro layering, whereas the reflections represent the high-wavenumber component of the medium, it is called the detailed or fine layering. The result of migration velocity analysis is the resolution of the low-wavenumber component of the medium, but the prestack elastic inversion provided the resolution of the high-wavvenumber component the medium. In the dissertation, the two aspects about the migration velocity estimation and the elastic inversion have been studied.Firstly, any migration velocity analysis methods must include two basic elements: the criterion that tell us how to know whether the model parameters are correct and the updating that tell us how to update the model parameters when they are incorrect, which are effected on the properties and efficiency of the velocity estimation method. In the dissertation, a migration velocity analysis method based on the CFP technology has been presented in which the strategy of the top-down layer stripping approach are adapted to avoid the difficult of the selecting reduce .The proposed method has a advantage that the travel time errors obtained from the DTS panel are defined directly in time which is the difference with the method based on common image gather in which the residual curvature measured in depth should be converted to travel time errors.In the proposed migration velocity analysis method, the four aspects have been improved as follow:? The new parameterization of velocity model is provided in which the boundaries of layers are interpolated with the cubic spline of the control location and the velocity with a layer may change along with lateral position but the value is calculated as a segmented linear function of the velocity of the lateral control points. The proposed parameterization is suitable to updating procedure.? The analytical formulas to represent the travel time errors and the model parameters updates in the t-p domain are derived under local lateral homogeneous. The velocity estimations are iteratively computed as parametric inversion. The zero differential time shift in the DTS panel for each layer show the convergence of the velocity estimation.? The method of building initial model using the priori information is provided to improve the efficiency of velocity analysis. In the proposed method, Picking interesting events in the stacked section to define the boundaries of the layers and the results of conventional velocity analysis are used to define the velocity value of the layers? An interactive integrate software environment with the migration velocity analysis and prestack migration is built.The proposed method is firstly used to the synthetic data. The results of velocity estimation show both properties and efficiency of the velocity estimation are very good.The proposed method is also used to the field data which is the marine data set. In this example, the prestack and poststack depth migration of the data are completed using the different velocity models built with different method. The comparison between them shows that the model from the proposed method is better and improves obviously the quality of migration.In terms of the theoretical method of expressing a multi-variable function by products of single-variable functions which is suggested by Song Jian (2001), the separable expression of one-way wave operator has been studied. A optimization approximation with separable expression of the one-way wave operator is presented which easily deal with the lateral change of velocity in space and wave number domain respectively and has good approach accuracy. A new prestack depth migration algorithm based on the optimization approximation separable expression is developed and used to testing the results of velocity estimation.Secondly, according to the theory of the seismic wave reflection and transmission, the change of the amplitude via the incident angle is related to the elasticity of medium in the subsurface two-side. In the conventional inversion with poststack datum, only the information of the reflection operator at the zero incident angles can be used. If the more robust resolutions are requested, the amplitudes of all incident angles should be used.A natural separable expression of the reflection/transmission operator is represented, which is the sum of the products of two group functions. One group function vary with phase space whereas other group function is related to elastic parameters of the medium and geological structure.By employing the natural separable expression of the reflection/transmission operator, the method of seismic wave modeling with the one-way wave equation is developed to model the primary reflected waves, it is adapt to a certain extent heterogeneous media and confirms the accuracy of AVA of the reflections when the incident angle is less than 45'. The computational efficiency of the scheme is greatly high.The natural separable expression of the reflection/transmission operator is also used to construct prestack elastic inversion algorithm. Being different from the AVO analysis and inversion in which the angle gathers formed during the prstack migration are used, the proposed algorithm construct a linear equations during the prestack migration by the separable expression of the reflection/transmission operator. The unknowns of the linear equations are related to the elasticity of the medium, so the resolutions of them provided the elastic information of the medium.The proposed method of inversion is the same as AVO inversion in , the difference between them is only the method processing the amplitude via the incident angle and computational domain.

Resource Management for Responsive Web Computing

The exploding demand for services like the World Wide Web reflects the potential that is presented by globally distributed information systems. The number of WWW servers world-wide has doubled every 3 to 5 months since 1993, outstripping even the growth of the Internet. At each of these self-managed sites, the Common Gateway Interface (CGI) and Hypertext Transfer Protocol (HTTP) already constitute a rudimentary basis for contributing local resources to remote collaborations. However, the Web has serious deficiencies that make it unsuited for use as a true medium for metacomputing --- the process of bringing hardware, software, and expertise from many geographically dispersed sources to bear on large scale problems. These deficiencies are, paradoxically, the direct result of the very simple design principles that enabled its exponential growth. There are many symptoms of the problems exhibited by the Web: disk and network resources are consumed extravagantly; information search and discovery are difficult; protocols are aimed at data movement rather than task migration, and ignore the potential for distributing computation. However, all of these can be seen as aspects of a single problem: as a distributed system for metacomputing, the Web offers unpredictable performance and unreliable results. The goal of our project is to use the Web as a medium (within either the global Internet or an enterprise intranet) for metacomputing in a reliable way with performance guarantees. We attack this problem one four levels: (1) Resource Management Services: Globally distributed computing allows novel approaches to the old problems of performance guarantees and reliability. Our first set of ideas involve setting up a family of real-time resource management models organized by the Web Computing Framework with a standard Resource Management Interface (RMI), a Resource Registry, a Task Registry, and resource management protocols to allow resource needs and availability information be collected and disseminated so that a family of algorithms with varying computational precision and accuracy of representations can be chosen to meet realtime and reliability constraints. (2) Middleware Services: Complementary to techniques for allocating and scheduling available resources to serve application needs under realtime and reliability constraints, the second set of ideas aim at reduce communication latency, traffic congestion, server work load, etc. We develop customizable middleware services to exploit application characteristics in traffic analysis to drive new server/browser design strategies (e.g., exploit self-similarity of Web traffic), derive document access patterns via multiserver cooperation, and use them in speculative prefetching, document caching, and aggressive replication to reduce server load and bandwidth requirements. (3) Communication Infrastructure: Finally, to achieve any guarantee of quality of service or performance, one must get at the network layer that can provide the basic guarantees of bandwidth, latency, and reliability. Therefore, the third area is a set of new techniques in network service and protocol designs. (4) Object-Oriented Web Computing Framework A useful resource management system must deal with job priority, fault-tolerance, quality of service, complex resources such as ATM channels, probabilistic models, etc., and models must be tailored to represent the best tradeoff for a particular setting. This requires a family of models, organized within an object-oriented framework, because no one-size-fits-all approach is appropriate. This presents a software engineering challenge requiring integration of solutions at all levels: algorithms, models, protocols, and profiling and monitoring tools. The framework captures the abstract class interfaces of the collection of cooperating components, but allows the concretization of each component to be driven by the requirements of a specific approach and environment.